I want to install any other modem but my note 3 does not let me do anything
I use Tweaked S5 Base Note 4 Style rom Android 4.4.2 Version 7.0
Modem is: XXUENB1
Build: KOT49H.G900SKSU1ANI1
I disabled already the reactivation protection, USB DEBUGGING is also enabled.
I use the original USB cable from note 3. KIES is not installed on my pc and I used ODIN as admin.
I got another modem, put my phone into download mode connected of course, and used another modem and put it into (CP/PHONE) in Odin3.10
It says, the flash is successfull but after reboot, the MODEM is NOT changed :"(
I tried several other modems but I can not seem to install any modem! HELP!
I tried to install stock rom via ODIN but it failed as the modem installation...
PS: Safestrap is on my device, my device is of course rooted and I also use PHILZ TOUCH 6
Did you follow this steps?:
1. Download the modem.
2. Unpack the rar file to anywhere on your computer, as long as you can access it.
3. Open up the included Odin and uncheck auto reboot.
4. Click on phone/CP, select the modem.bin, and press start.
5. When you finish the flash, manually reboot your phone back to download mode and flash the modem.bin one more time.
6. When the flash is complete, reboot and you're finished!
It's because you did not power off your phone, or remove the battery before doing the button combo for download mode, let it stay off for 15 seconds then try again.
Should work fine.
Okay, I will try to do the dual Flash and tell you if it works!
I need helps to unbrick my i9505
Before ,phone was on Android 5.0.1
& Base band OHD7
After an wipe all data
I get this screenshot &
phone is not recognize by pc
I have download mode but
i cant obtain recovery mode
Bigs Thanks for all replies.
Download from Sammobile the firmware for your model and country,put the phone in download mode en flash the firmware with Odin and all should be fine
Bigs thanks for answering
I will tray but not with big conviction
Because phone in download mode
is not detected by pc
I will test other pcs & other cables
Thanks very much
Two days ago i had the same issue and i tried on Windows Vista and on Windiws 10,no succes. Succes on Windows 7.
Do you have KIES on your pc? If not download Kies,it will install the nesesarry drivers on your pc.
hi , ludoke
i tried 2nd time with another laptop :
Now my phone is detected by pc on download mode it work on win7
i flash firmware but
i get FAIL with notification there is no partition : attached screenshot
Always no recovery mode and normal reboot give screen get issue with pc <-------->phone
i will try with kies
thanks for encouragements & helps
Then you have to search for firmware with Pit. file and CSC and Modem, Firmware files and flash with Odin ,repartition ticked.
Search or ask here on XDA, i can't help you with that
Did you unpack the firmware zipfile once ? Don't flash the zip file and do NOT tick repartition if you have just 1 file(tar)
Different usb port/ make sure you flash not an old firmware when you are on the knox bootloader.
Hi , Lennyz1988 & Kudoke
Before sofbrick phone was android v5.0.1 & Base band OHD7
I tried flash firmware XXUHOA7 with pit on odin 3.10.6
But i get FAIL attached screenshot on #1
i will test with other odin versions & other pc always win7
kind regards
In howmany files was that firmware ? Firmware from Sammobile has mostly 1 file in the zip,so my advice is to download firmware from Sammobile for your model and country,unpack the zipfile once and you get two files . Go to download mode.
Flash the biggest file in the AP box in Odin and do NOT thick repartition. Use Odin 3.09
Also,use usb 2 port
Lastly i success the flash
I get this far
for that i have reinstalled new Os windows 7 on laptop
i use odin 3.09 and the same firmware XXUHOA7 with 4 files no pit
miraculous thing : green PASS , attached screenshot on #1
i have average fifties flashs sucess & a dozen different devices rooted
but this one make me very happy
I hope that noobs friends share & take advantage of my modest experience in 3 days
Thousand thanks for Ludoke & Lennyz1988.
hi all,
first sorry for my bad english.
andorid version 6.0.1, rooted.
i have two problems
first, phone is single sim, but in settings shows "manage sim cards" phone is no g935FD, phone is g935F, but phone works ok.
second, when i update with odin, firmware form sammobile, i can't connect on network, my sim card can't work.
i backup all with flashfire, and when i restore all expect EFS and modem firmware, phone still does't work, and with efs work.
my phone is gift from cousin, and that in settings show only one sim and phone is rooted too.
After that I tried, and I told you what happened.
please help me how to update to 7.0, and how to solve problem with sim.
i tried to update with odin, but when i restore efs and modem, phone, can't connect on network.
UP !
Up !!
Anyone ?
Upppppp
Antonije123 said:
hi all,
first sorry for my bad english.
andorid version 6.0.1, rooted.
i have two problems
first, phone is single sim, but in settings shows "manage sim cards" phone is no g935FD, phone is g935F, but phone works ok.
second, when i update with odin, firmware form sammobile, i can't connect on network, my sim card can't work.
i backup all with flashfire, and when i restore all expect EFS and modem firmware, phone still does't work, and with efs work.
my phone is gift from cousin, and that in settings show only one sim and phone is rooted too.
After that I tried, and I told you what happened.
please help me how to update to 7.0, and how to solve problem with sim.
i tried to update with odin, but when i restore efs and modem, phone, can't connect on network.
Click to expand...
Click to collapse
Can you please provide your device exact model number? It is printed below on the back panel of your phone..Then can suggest you exact stock firmware to flash using odin
DroidHackeR said:
Can you please provide your device exact model number? It is printed below on the back panel of your phone..Then can suggest you exact stock firmware to flash using odin
Click to expand...
Click to collapse
Model is g935f.
I tried superstock room, but again problem with network connect
Antonije123 said:
Model is g935f.
I tried superstock room, but again problem with network connect
Click to expand...
Click to collapse
What do you mean by superstock room? You need to flash latest nought 7.0 stock firmware for your device..
1)Go to the link provided below and select country for your device and download latest 7.0 firmware using free member through registration
https://www.sammobile.com/firmwares/database/SM-G935F/
AFTER THAT FOLLOW ODIN FLASHING GUIDE PROVIDED BELOW
1)You can flash stock firmware for you specific device and country using sammobile.com as a free member registration* Remember to download latest stock firmware for your specific model number and country, you can find your model number printed below on back panel of your phone*
2)Go there in firmware section and enter your device model no and country..( Save it to pc and extract it on your pc in particular firmware folder, you will now find tar.md5 file in that folder)..Now download latest versions of odin and Samsung usb drivers for your device( Extract those files as you did with firmware, install latest usb drivers on pc)
3)From your phone's setting>about device>software info>press build version for 7-8 times continuesly to enable developers option
4)You can find developers option below setting>about device..From developers option select oem unlocking and usb debugging enabled
5)Now connect your phone to pc in download mode( Press volume down+home+power button simultaneously, you are now in download mode..press volume up button to continue)
6) Run odin as device administrator on your pc from odin extracted folder, let pc to install device drivers and your device will be highlighted in odin..
7)Add previously extracted tar.md5 file of stock firmware in AP tab of odin, give it some time to be ready..In odin options let auto reset and reboot options checked..*Dont check repatriation option*
8) Now click start button in odin, flashing process have been started..Sit back and relax untill firmware is being flashed..After that your device will be automatically rebooted and you will have latest stock firmware on your device..
*DO IT ON YOUR OWN RISK NOR I NEITHER ANYONE FROM XDA FORUM WILL BE RESPONSIBLE FOR ANY DAMAGE OR BRICK OF YOUR DEVICE*
DroidHackeR said:
What do you mean by superstock room? You need to flash latest nought 7.0 stock firmware for your device..
1)Go to the link provided below and select country for your device and download latest 7.0 firmware using free member through registration
https://www.sammobile.com/firmwares/database/SM-G935F/
AFTER THAT FOLLOW ODIN FLASHING GUIDE PROVIDED BELOW
1)You can flash stock firmware for you specific device and country using sammobile.com as a free member registration* Remember to download latest stock firmware for your specific model number and country, you can find your model number printed below on back panel of your phone*
2)Go there in firmware section and enter your device model no and country..( Save it to pc and extract it on your pc in particular firmware folder, you will now find tar.md5 file in that folder)..Now download latest versions of odin and Samsung usb drivers for your device( Extract those files as you did with firmware, install latest usb drivers on pc)
3)From your phone's setting>about device>software info>press build version for 7-8 times continuesly to enable developers option
4)You can find developers option below setting>about device..From developers option select oem unlocking and usb debugging enabled
5)Now connect your phone to pc in download mode( Press volume down+home+power button simultaneously, you are now in download mode..press volume up button to continue)
6) Run odin as device administrator on your pc from odin extracted folder, let pc to install device drivers and your device will be highlighted in odin..
7)Add previously extracted tar.md5 file of stock firmware in AP tab of odin, give it some time to be ready..In odin options let auto reset and reboot options checked..*Dont check repatriation option*
8) Now click start button in odin, flashing process have been started..Sit back and relax untill firmware is being flashed..After that your device will be automatically rebooted and you will have latest stock firmware on your device..
*DO IT ON YOUR OWN RISK NOR I NEITHER ANYONE FROM XDA FORUM WILL BE RESPONSIBLE FOR ANY DAMAGE OR BRICK OF YOUR DEVICE*
Click to expand...
Click to collapse
If i only flash ap phone can't run.
Superstock room i downloaded form xda.
Yes i know everything you wrote, but when flash stock firmware my phone on search network show one network, and show that's my phone g935fd.
First time when i update phone, i must send at service, and my phone was been rooted on 6.01 and single sim(g935f) .
I tried to install stock 6.01 via odin from sammobile but don't work
Antonije123 said:
If i only flash ap phone can't run.
Superstock room i downloaded form xda.
Yes i know everything you wrote, but when flash stock firmware my phone on search network show one network, and show that's my phone g935fd.
First time when i update phone, i must send at service, and my phone was been rooted on 6.01 and single sim(g935f) .
I tried to install stock 6.01 via odin from sammobile but don't work
Click to expand...
Click to collapse
You should flash 7.0 latest nougat for your device model no and country instead of 6.0.1 through odin..Try to flash 7.0 stock firmware instead of superstock rom or stock 6.0.1..If you are running your phone well and have root access..Download Samsung phone info app..Grant root access and provide me screen-shot of information shown in that application here..So i can suggest you proper stock firmware to be flashed using odin
DroidHackeR said:
You should flash 7.0 latest nougat for your device model no and country instead of 6.0.1 through odin..Try to flash 7.0 stock firmware instead of superstock rom or stock 6.0.1..If you are running your phone well and have root access..Download Samsung phone info app..Grant root access and provide me screen-shot of information shown in that application here..So i can suggest you proper stock firmware to be flashed using odin
Click to expand...
Click to collapse
Ss
Antonije123 said:
Ss
Click to expand...
Click to collapse
Nougat is still not available for your country..So you have flashed latest stock 6.0.1 firmware using odin? Still you are not getting network signal? After flashing stock firmware don't restore your efs, it will be restored automatically after flashing...Now just again flash the stock 6.0.1 available on sammobile and after flashing when you see Samsung logo, simply press volume down+power button now your screen will turn off..immediately Press volume up+power+home button simultaneously untill you see Samsung galaxy logo, now release keys and you will boot into stock recovery..From there choose wipe data/factory reset option..After reset, reboot your phone..And see if singal back again or not?
DroidHackeR said:
Nougat is still not available for your country..So you have flashed latest stock 6.0.1 firmware using odin? Still you are not getting network signal? After flashing stock firmware don't restore your efs, it will be restored automatically after flashing...Now just again flash the stock 6.0.1 available on sammobile and after flashing when you see Samsung logo, simply press volume down+power button now your screen will turn off..immediately Press volume up+power+home button simultaneously untill you see Samsung galaxy logo, now release keys and you will boot into stock recovery..From there choose wipe data/factory reset option..After reset, reboot your phone..And see if singal back again or not?
Click to expand...
Click to collapse
Can you send me link for what country to download? I download for slovenia 6.01 but still don't work, and i must restore efs,preload and modem firmware.
App i used to backup ans restore flashfire. I don't konw what is preload but is very important to signal.
Antonije123 said:
Can you send me link for what country to download? I download for slovenia 6.01 but still don't work, and i must restore efs,preload and modem firmware.
App i used to backup ans restore flashfire. I don't konw what is preload but is very important to signal.
Click to expand...
Click to collapse
Try this one as your csc in TOP and country is serbia-russia..Flash it using odin and report..By the way before flashing enable OEM UNLOCKING and USB DEBUGGING from developers option..
Link- https://www.sammobile.com/firmwares/download/89389/G935FXXU1BPH6_G935FTOP1BPH1_TOP/
JUST FLASH AS I INSTRUCTED ABOVE IN FIRST POST I.E.HOW TO FLASH STOCK FIRMWARE USING ODIN AND DO FACTORY RESET VIA STOCK RECOVERY AFTER FLASHING AS I SAID IN MY PREVIOUS POST
DroidHackeR said:
Try this one as your csc in TOP and country is serbia-russia..Flash it using odin and report..By the way before flashing enable OEM UNLOCKING and USB DEBUGGING from developers option..
Link- https://www.sammobile.com/firmwares/download/89389/G935FXXU1BPH6_G935FTOP1BPH1_TOP/
JUST FLASH AS I INSTRUCTED ABOVE IN FIRST POST I.E.HOW TO FLASH STOCK FIRMWARE USING ODIN AND DO FACTORY RESET VIA STOCK RECOVERY AFTER FLASHING AS I SAID IN MY PREVIOUS POST
Click to expand...
Click to collapse
Ok, flash only ap or bl, ap, cp,csc ?
Antonije123 said:
Ok, flash only ap or bl, ap, cp,csc ?
Click to expand...
Click to collapse
This is single bundled firmware including ap,cp,bl in it and it is have to flash as AP only..
DroidHackeR said:
This is single bundled firmware including ap,cp,bl in it and it is have to flash as AP only..
Click to expand...
Click to collapse
ok, i will try now, and report here after done
up: after flash i have again two sim, and on search network show me only one network witch is not mine.
Antonije123 said:
ok, i will try now, and report here after done
up: after flash i have again two sim, and on search network show me only one network witch is not mine.
Click to expand...
Click to collapse
Ohhhk now one more tutorial for you and it will help you i guess
1) Download samsung smartswitch application for windows from the link provided below
http://samsungsmartswitch.org/
2) Install latest samsung usb drivers for your s7 edge from below
http://samsungusbdriver.com/download/samsung-driver-v1-5-63-0
3)Now install both samsung smart switch and samsung usb drivers on your windows pc
4) Open samsung smart switch as device administrator on your pc
5) Power off your device and press volume down+home+power button simultaneously untill you get into download mode, now press volume up to continue
6)After installing usb drivers for your phone by pc, your device will be recognised in smart switch
7) Select emergency software recovert option from smart switch
8) It will ask you some information like model no and serial no ( You can find model no and serial no printed below on back panel of phone or on the box of phone)
9) After providing such information, smart switch will locate latest and correct software version to be installed for your device
10) Start update and sit back..It will take some time to update software..After that your device will be reboot and if you are facing bootloop i.e. stuck at samsung logo follow factory reset process i have provided earlier( While your phone stuck at samsung logo for long time, press volume down+power button, screen will turn off now immediatly press volume up+power+home button simultaneously untill you see samsung galaxy s7 edge logo..Now release buttons, you will boot into stock recovery..From there choose wipe data/factory reset option..After reset complete, reboot your device)
*IF SMART SWITCH FAILS TO DETECT YOUR DEVICE, UNINSTALL SAMSUNG USB DRIVER AND INSTALL THEM AGAIN AND FOLLOW PROCESS AGAIN*
● You can refer this guide that how to find and restore exact firmware for your device using Smart switch before trying
https://www.sammobile.com/forum/showthread.php?t=29914
DroidHackeR said:
Ohhhk now one more tutorial for you and it will help you i guess
1) Download samsung smartswitch application for windows from the link provided below
http://samsungsmartswitch.org/
2) Install latest samsung usb drivers for your s7 edge from below
http://samsungusbdriver.com/download/samsung-driver-v1-5-63-0
3)Now install both samsung smart switch and samsung usb drivers on your windows pc
4) Open samsung smart switch as device administrator on your pc
5) Power off your device and press volume down+home+power button simultaneously untill you get into download mode, now press volume up to continue
6)After installing usb drivers for your phone by pc, your device will be recognised in smart switch
7) Select emergency software recovert option from smart switch
8) It will ask you some information like model no and serial no ( You can find model no and serial no printed below on back panel of phone or on the box of phone)
9) After providing such information, smart switch will locate latest and correct software version to be installed for your device
10) Start update and sit back..It will take some time to update software..After that your device will be reboot and if you are facing bootloop i.e. stuck at samsung logo follow factory reset process i have provided earlier( While your phone stuck at samsung logo for long time, press volume down+power button, screen will turn off now immediatly press volume up+power+home button simultaneously untill you see samsung galaxy s7 edge logo..Now release buttons, you will boot into stock recovery..From there choose wipe data/factory reset option..After reset complete, reboot your device)
*IF SMART SWITCH FAILS TO DETECT YOUR DEVICE, UNINSTALL SAMSUNG USB DRIVER AND INSTALL THEM AGAIN AND FOLLOW PROCESS AGAIN*
● You can refer this guide that how to find and restore exact firmware for your device using Smart switch before trying
https://www.sammobile.com/forum/showthread.php?t=29914
Click to expand...
Click to collapse
i tried, but that installated (DRE), and don't work
Antonije123 said:
i tried, but that installated (DRE), and don't work
Click to expand...
Click to collapse
You have tried both stock flashing through odin and also smart switch recovery still not getting any signal?? I think i have helped you in all possible ways i could suggest..Now you can either wait for any expertised advice or simply visit samsung service centre and ask them to restore you phone's original firmware...Sorry and Regards
TL;DR – I am stuck in ODIN MODE and my PC (and Odin) does not recognize device once it is connected via USB.
Hi to all,
I am aware that this device is bit outdated, but I have dug it up from the depths of my drawers and decided to try to update its Lineage OS version. I have downloaded TWRP and custom ROM alike, but then I have made severe mistake – I have flashed TWRP in to recovery as well as to bootloader. Now I am stuck in ODIN MODE. Which would not be a problem, if Odin could detect my device on my PC, which is not happening. I am on WIN11. The steps what I have tried:
1. I have downloaded drivers from https://developer.samsung.com/android-usb-driver.
2. I have tried multiple versions of ODIN (v3.09, v3.12, v3.13) which I have ran as administrator.
3. I have tried to connect SM-G900F on older notebook with WIN7 (HP Mini 5102) and installed drivers from step 1.
4. As last resort, I have downloaded and installed Samsung Kies (on WIN11), which – as I expected – have not solved my problem at all.
I am not sure what step should I take next. Do you have any ideas? Thank you in advance for any recomendations!
Best regards,
Neuro
Try this XDA site search & add keywords to taste: site:forum.xda-developers.com s5 odin mode not recognized
***