RESOLVED : How to unbrick my sg4 i9505 after wipes ? - Galaxy S 4 Q&A, Help & Troubleshooting

I need helps to unbrick my i9505
Before ,phone was on Android 5.0.1
& Base band OHD7
After an wipe all data
I get this screenshot &
phone is not recognize by pc
I have download mode but
i cant obtain recovery mode
Bigs Thanks for all replies.

Download from Sammobile the firmware for your model and country,put the phone in download mode en flash the firmware with Odin and all should be fine

Bigs thanks for answering
I will tray but not with big conviction
Because phone in download mode
is not detected by pc
I will test other pcs & other cables
Thanks very much

Two days ago i had the same issue and i tried on Windows Vista and on Windiws 10,no succes. Succes on Windows 7.
Do you have KIES on your pc? If not download Kies,it will install the nesesarry drivers on your pc.

hi , ludoke
i tried 2nd time with another laptop :
Now my phone is detected by pc on download mode it work on win7
i flash firmware but
i get FAIL with notification there is no partition : attached screenshot
Always no recovery mode and normal reboot give screen get issue with pc <-------->phone
i will try with kies
thanks for encouragements & helps

Then you have to search for firmware with Pit. file and CSC and Modem, Firmware files and flash with Odin ,repartition ticked.
Search or ask here on XDA, i can't help you with that
Did you unpack the firmware zipfile once ? Don't flash the zip file and do NOT tick repartition if you have just 1 file(tar)

Different usb port/ make sure you flash not an old firmware when you are on the knox bootloader.

Hi , Lennyz1988 & Kudoke
Before sofbrick phone was android v5.0.1 & Base band OHD7
I tried flash firmware XXUHOA7 with pit on odin 3.10.6
But i get FAIL attached screenshot on #1
i will test with other odin versions & other pc always win7
kind regards

In howmany files was that firmware ? Firmware from Sammobile has mostly 1 file in the zip,so my advice is to download firmware from Sammobile for your model and country,unpack the zipfile once and you get two files . Go to download mode.
Flash the biggest file in the AP box in Odin and do NOT thick repartition. Use Odin 3.09
Also,use usb 2 port

Lastly i success the flash
I get this far
for that i have reinstalled new Os windows 7 on laptop
i use odin 3.09 and the same firmware XXUHOA7 with 4 files no pit
miraculous thing : green PASS , attached screenshot on #1
i have average fifties flashs sucess & a dozen different devices rooted
but this one make me very happy
I hope that noobs friends share & take advantage of my modest experience in 3 days
Thousand thanks for Ludoke & Lennyz1988.

Related

[Q] Problem with recovery mode

Hi, i'm new here and i need help urgent. I want to root my Samsung Galaxy S4 GT-I9505 Orange (Romania). I do this with Odin 3.09 and i do something wrong because i forgot to intall Kies and driver and now i can't recover it. When i want to recover with Odin just give me a FAIL and i don't know how to recover perfectly with Odin and with Kies don't appear when i click recovery in Tools and he says i don't have firmware updates.
Please i need to recover my phone if someone can say step-by-step to recover it, please, help me. Thanks
NeverDieRo said:
Hi, i'm new here and i need help urgent. I want to root my Samsung Galaxy S4 GT-I9505 Orange (Romania). I do this with Odin 3.09 and i do something wrong because i forgot to intall Kies and driver and now i can't recover it. When i want to recover with Odin just give me a FAIL and i don't know how to recover perfectly with Odin and with Kies don't appear when i click recovery in Tools and he says i don't have firmware updates.
Please i need to recover my phone if someone can say step-by-step to recover it, please, help me. Thanks
Click to expand...
Click to collapse
1. Install Kies and Drivers
2. Unistall Kies, leaving Drivers
3. Install Odin3 V1.85
4. Go to Sammobile.com and download LATEST 4.4.2 firmware package in .Tar format for your country
5. Boot phone into download mode (Volume down + Power)
6. Open Odin
7. Connect phone via USB
8. Load firmware in PDA section of Odin
9. Click START
10. Wait till you see a green PASS appear in Odin.
11. Dance around the room in a joyous jig, whilst waving your arms in the air and screaming "yay, I fixed my phone"

[solved] pit for sm-n9005 32 gb pit [bri-tgy]

BEFORE MY PHONE RUNNING ON XSI 5.0 FIRMWARE
AND NOW BY THIS PROCEDURE
SUCCESFUL TO INSTALL BRI 5.0
THIS IS FOR MISMATCH CATCH.IMG.EXT4
ODIN FAIL WHO TRY IT
FOR FLASH WTH HONGKONG TAIWAT FIRMWAE 5.0 WORKING THIS PIT
FIRST U DOWNLOAD
N9005ZSUGOK2 N9005OZSGOK2 N9005ZSUGOK2 FROM SAMMOBILE
THEN DOWNLOAD PIT FILE GIVEN LINK
then download Odin_v3.09
select pit
pad tab select firmware
before connect phone enable usb debugging
then connect phone with download mode
FLASH FIRMWARE
WAIT 5 MINUTE YOUR PHONE STUCK IN BOOT
MUST CWM RECOVERY n9005-cwm-recovery-6.0.4.7-kk(0125) COMPALSARY FLASH
NOW REMOVE BATTERY AND INSERT IT AGAIN
AND GO IN DOWNLOAD MODE
THEN DOWNLOAD CWM RECOVERY FILE GIVEN LINK
CWM RECOVERY.TAR UNDER PDA TAB AND FLASH IT
THEN YOUR PHONE START IN NORMAL BOOT AND EVERYTHING WORKING PERFECTLY

Help whit brick phone

I have a problem I want to install Offical lollipop 5.0 but when I put in the download mode and Odin under ap choose the original firmware we start loading , and finally inscriptions faild ext4 on the phone in download mode writes too large a file many times I tried but still the same please advise

Samsung Galaxy Note 3 N9005 only download mode

Hello everyone,
I have a N9005 that only goes into download mode. It doesn't go into recovery mode. When I try to put it in recovery mode, just vibrates, the screen is black and continues to restart itself, vibrating.
If I try to turn it on normaly, Samsung Galaxy Note 3 N9005 logo comes on, stayes like this for 30, seconds, restarts, vibrates twice and keeps on doing this on and on
If I take it to download mode and try to flash a new rom, Odin tells me that there is no PIT partition. I even added the PIT file, but the same, no luck
When I try to flash a rom, on the download mode screen give me different red messages
UDC START-red color
MMC reading error
I even tryed to do emergency recovery with keys, but no luck as well
Any advice?
Regards!
Install Firmware from Sammobile...
albrecht1977 said:
Install Firmware from Sammobile...
Click to expand...
Click to collapse
I will let you know how it works/if it works
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
JJEgan said:
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
Click to expand...
Click to collapse
Yes, I am flashing the correct firmware from sammobile.
It is tar.md5
Now the phone shows me ODIN: flash read failure.
What can I do in this situation? If it is as you wrote, damaged Nand?
JJEgan said:
You cannot install roms via download mode .
Only official firmware.
If you have flashed official firmware via Odin then try flashing TWRP recovery via Odin .
Are you flashing the correct firmware as a TAR file ??
MMC reading error is probable damaged Nand .
Posted reported to mods for moving to correct Q&A section .
Click to expand...
Click to collapse
When I try to flaah the TWRP recovery, "there is no PIT partition"
Find 4 part firmware and flash correct PIT file /
Suggest a search on NAND fail / Nand Write fail on XDA .
JJEgan said:
Find 4 part firmware and flash correct PIT file /
Suggest a search on NAND fail / Nand Write fail on XDA .
Click to expand...
Click to collapse
Do you have any ideea where I can find the 4 part firmware?
Thanks
Sammobile /updato/samsung -updates. Alldot comms
Search this forum search google.
Have you tried using different USB cables and USB ports?
Odin will sometimes give the "PIT" error when you don't use an OEM cable.
audit13 said:
Have you tried using different USB cables and USB ports?
Odin will sometimes give the "PIT" error when you don't use an OEM cable.
Click to expand...
Click to collapse
Hey guys. Did anyone ever find the solution for this? I have the exact same problem like as in literally exactly. And I've tried the 4part repair firmware, with the pit, as wel as the combination firmware as well as the stock firmware and even tried cf auto root, boot images, twrp flashes.. Nothing! Just also keeps giving the pit error.
Reads as NAND fail , if you have followed all the advice .

Bricked J500M Any solution PC no recognize

Hi, my j500m is bricked because Install the firmware combination to eliminate the frp of the device at the end of the procedure, I proceeded to install the rom stock, in the middle of the installation (partition system) it is hung I left it for a long time and the same, and it happened to me with all the rom stock that download, in the end I searched and decided to install the rom with 4 recovery files and the pit file (BL, AP, CP, CSC and PIT file) when starting odin generated an error in the pit file the phone instead of now restarting in download mode as before I did it, now turn on and go directly into recovery, the computer does not recognize it in any way now and I cannot recover how it would solve this problem
kiomet said:
Hi, my j500m is bricked because Install the firmware combination to eliminate the frp of the device at the end of the procedure, I proceeded to install the rom stock, in the middle of the installation (partition system) it is hung I left it for a long time and the same, and it happened to me with all the rom stock that download, in the end I searched and decided to install the rom with 4 recovery files and the pit file (BL, AP, CP, CSC and PIT file) when starting odin generated an error in the pit file the phone instead of now restarting in download mode as before I did it, now turn on and go directly into recovery, the computer does not recognize it in any way now and I cannot recover how it would solve this problem
Click to expand...
Click to collapse
Doe's your phone go into download mode, if yes try to uninstall Samsung drivers and install them again and try again with another USB cable
Mscreams said:
Doe's your phone go into download mode, if yes try to uninstall Samsung drivers and install them again and try again with another USB cable
Click to expand...
Click to collapse
the drivers is not problem and i use 3 USB
kiomet said:
the drivers is not problem and i use 3 USB
Click to expand...
Click to collapse
Try to use 2 USB

Categories

Resources