Hello.
I own a Samsung Galaxy J5 Prime 2016 SM-G570F
I'm looking to flash it with the latest TWRP recovery but sadly I couldnt find it on the official website
I want to install the latest version of twrp 3.2.1
On my phone, can anyone help me please
Someone help please
There is no TWRP 3.2.1.0 for your phone, but I found 3.1.1, it works with almost every custom ROM and other flashable things, like root manager. https://forum.xda-developers.com/galaxy-j5/samsung-galaxy-j5-prime-roms-kernels-recoveries--other-development/twrp-twrp-galaxy-j5-prime-t3605990
If you want a root manager, I recommend Magisk Manager, the best of the best for me.
If you want a custom ROM, download Resurrection Remix, so amazing!
You know how to flash TWRP?
- You must have Samsung Odin, TWRP MD5 (TAR) file.
- DISABLE OEM UNLOCK in Developer Settings in your phone. (Tap 7 times the build number in your phone (Settings -> About device))
- Turn off the phone
- Click Vol- , Home and Power buttons at once
- When you'll see warning message, click Vol+
- Open Odin, make sure you have "F. Reset Time" confirmed.
- Click PDA button (can be AP) and select your TWRP file
- Now connect your phone to the computer
- You should see "Added!" in Odin
- Now click the "Start" button
- If it's failed, remove battery from the phone for 5 minutes and put it back again
* Remove the cable too
- Turn the Download Mode again
- Connect the phone, you should see "Added!" again
- Click the "Start" button
- It it failed again, just restart flashing
- You should see "All threads completed (succeed 1 / failed 0)
- Be happy of your new TWRP on the phone!
Related
hey guys, i just tryed to install a rooted kernel on my s6 edge s6+ (g928f) and now it just says "kernel is not seandroid secure" what to do? i have tryed different kernels... and it wont start at all do you guys have an idea of what to to? its all stock firmware, no CWM or anything installed
you make a nandroid backup bevor?
Same problem
Verstuurd van mijn SM-G928F met xda-developers.com, mogelijk gemaakt door appyet.com
Same problem x2
In a other post some one tell me how to fix it , and it works for mee my sm g928f is rooted later today i will post it in this threat
Originally Posted by agantal864
Note: i am not responsible for any damage taken using this method just follow the instruction properly and you will not have any problems
Your phones version should be marshmallow 6.0.1 dont use this if your version is lollipop
Prerequisites:
Odin,Twrp,samsung usb drivers,supersu beta by chainfire,a computer and usb cable
Links for download is below
Procedures:
1.install samsung usb drivers to your computer
2.copy twrp file to your computer in desktop(if its extension is .zip then extract it, then if its .img then leave it)
3.copy odin file to your pc in desktop and extract it
4.copy supersu file to your internal memory, be sure to memorize where you put the file
5.open odin.exe file in desktop, go to option, untick auto reboot,and leave everything else.
6.from your phone go to developer options, (to go there click build number many times) now find oem unlocking and enable it .. (Just to be sure remove google account and screen lock to avoid frp lock)
7.power off your phone and go to download mode(to go there,hold power button,volume down button,and home button simultaneously, and press volume up to enter dl mode)
8.plug your phone to pc (be sure you followed step 4 or else you may get dm verification) just follow everything else correctly and your good to go
9.now go to odin and click AP button,a file explorer will appear and find the twrp file and select it and then click start
10.you will see the message in odin PASS
11.this is important step.... Now click all the button of your phone, as soon as it gets out to download mode quickly unpress volume down leaving only power,home,volume up button
12 keep pressing those 3 buttons until you will see red message in upper left but just ignore it and keep pressing the button
13 and now twrp will be open and it will say allow modification? Be sure supersu file is already stored in your phone storage to apply patch
Now swipe right to allow
14. Now go to the box saying install and find your supersu file and select and install it(swipe right to install)
15.Super su file will be installed and patch will be applied and after it is done, click reboot system..
Now your phone will reboot and wait
You now have root access and custom recovery installed , to check root, download supersu in play store and root checker,
Download link:
ODIN link: http://uploaded.net/file/6xtojk1o
TWRP link: https://dl.twrp.me/noblelte/twrp-3.0...eltezt.img.tar
supersu: https://download.chainfire.eu/924/Su...0228150503.zip
USB drivers link: http://developer.samsung.com/technic...o?v=T000000117
REFERENCE: http://www.androidsis.com/recovery-r...-s6-edge-plus/
THIS one works for me
First and most important thing for installing/upgrading to Stock MM is clean install (even for Odin flash). That`s why we need a WIPED device. And if you fellow this step, then hopefully you`ll never get any issues (bootloop, abnormal battery drain etc). and this is for rooted devices with custom recovery (TWRP).
I always follow these setps.
DO it at your own risk.
1. Go to TWRP Recovery mode (by pressing volume up + power + home button)
2. Enter in Wipe menu
3. Advance wipe
4. Tick Cashe,Data, System, Internal Storage (except external storage/ Micro SD Card) and swipe to wipe.
5. Go to Reboot menu.
6. Power off the device. (Ignore " No OS Installed " message).
7. Open back cover and pull out Sim cards and Memory card(if any).
8. Download Odin ( I use v.3.11.1).
http://forum.xda-developers.com/showthread.php?t=2711451
9. Install essential drivers for your device in your PC/Laptop..
10. Download Stock MM (latest) Firmware for your Device from sammobile.
http://www.sammobile.com/firmwares/database/SM-J700F/
11. Extract (.tar.md5) it in Odin folder.
12. Go to Download Mode (volume down + power + home button and then volume up)
13. Open odin
14. Connect your device with Original Usb cable.
15. Odin will say "Added" once you connected your device. If not, then check all the drivers and Usb cable.
16. In Odin, make sure "Auto Reboot " and "F. Reset Time" options are Ticked.
17. And make sure "Re Partition" option is not ticked Or marked (checke twice). Don`t touch any other options in Odin.
18. Click on "AP" tab and select the firmware you extracted earlier for your device (.tar).
19. check again everything.
20. If everything is OK. then click on "Start" and sit back.
Odin will display "PASS", when it completed.
And your device will reboot.
After setting your device, power off your device and insert Sim cards (must) and Memory card (optional).
Switch on your device.
Here you can check for the latest software update for your device again. If any update is available, it`ll ask for download and install the latest OS. you should install this update (if available) with wifi/data connection. I`ve installed the latest "J700FXXU2BPG3_J700FODD2BPF9_INS.zip" and after setting the device for the first time, it asked for the OS update again. I downloaded and installed the update and it was "BPH2" with "August Security Patch".. And now I`ve "BPH2" in my device. And I think this the latest update from samsung for J700F.
AND AFTER THAT YOU SHOULD DO FACTORY RESET.
Now you can setup your device according to your wish. And enjoy new stock MM.
These are the steps , I always follow when installing /upgrading any samsung device and really it always provides a very stable and smooth performance.
I just share my procedures.Hope it helps.
HOW TO INSTALL TWRP RECOVERY IN MM J700F
----------------------------------------------------------------------
I`ve installed TWRP in J700F in MM successfully through this procedures.
I just share. Hope it helps.
Do it at your own risk.
1. Download Odin (I use v.3.11.1).
2. Download TWRP for samsung galaxy J7 (Just google it and you`ll find).
3. Open odin
4. Make sure only "F. Reset Time" option is ticked/marked. Here you should untick all options except "F. Resaet Time" ( "Auto Reboot" option should be unticked). And "Re-Partion" option must be unticked. Don`t touch any other options in Odin.
5. Switch off your device
6. Go to Download mode in your device
7. Click on "AP" tab and select "twrp-3.0.2-0-j7elte.img.tar".
8. Check again everything.
9. If everything is OK, then click on "Start".
10. Odin will display "PASS', when it completed.
11. After that unplug your device from PC and press volume down + power button and let your device reboot forcefully. Release volume down button and press volume up + home button as soon as you see the black screen. And your device should now be in TWRP mode.
Now you`ve TWRP in your device.
And Make a Nandroid backup first (it`s for future and safety).
HOW TO ROOT J700F IN STOCK MM
---------------------------------------------
You`ve install latest Stock MM and latest TWRP Recovery in your device successfully. Now you can root your device (certainly if you want).
I`ve rooted my J700f successfully (latest "BPH2" with "August Security Patch") with this procedure.
Do at your own risk.
1. Download Chainfire superSu ( I use BETA-SuperSU-v2.77-20160827190633.zip) and it will give you systemless root ( if you want to learn about systemlees root , here you go
http://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
2. Copy supersu.zip in your sd card
3. Go to TWRP
4. Select SuperSu.zip and Flash.
5.Reboot your device, when it completted.
And your device is now rooted and you`ll find SuperSu app in your app drawer. You can check rooting status with Root Checker App from google PlayStore.
HOW TO INSTALL XPOSED IN J700F IN STOCK MM
-------------------------------------------------
You can install Xposed in your device (J700F) in stock MM.
I`ve installed xposed in my J700F in Stock MM successfully.
Do it at your own risk.
1. Download "xposed-v86.1-sdk23-arm-custom-build-by-wanam-20160904.zip", " xposed-uninstaller-20150831-arm.zip" and "XposedInstaller_3.0_alpha4.apk".
Please follow this thread :
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
2. copy all the files in your sd-card.
3. Install "XposedInstaller_3.0_alpha4.apk" normally.
4. Switch off your device.
5. Go to TWRP.
6. Select "xposed-v86.1-sdk23-arm-custom-build-by-wanam-20160904.zip" and flash.
7. Reboot your device when it completted.
It`ll take some times to boot your device. After booting, you`ll find Xposed app in your app drawer. Install Modules according to your requirement and compatibility. And enjoy.
[ROM] J710FXXU2AQA8 [4 file firmware] J7 2016 Latest Stock ROM Build Date 2th Feb. 2017 [J710FN]+ Root +Debloated
It's not on sammobile.com
It's not on live.samsung-updates.com
It's only here on XDA
The latest stock ROM for J7'6 J710FN
That was released this February 02 2017 by Samsung.
Devs can use it in their work to make Deodexed or Custom ROMs
ROM: 6.0.1
Baseband: J710FXXU2AQA4
Country: Rusia
Build date: 2th Feb. 2017
Security Patch Level: 1st Jan 2017
Instructions
• It's a 4 file firmware, meaning it's in 4 parts
1. BL_ J710FXXU2AQA8
2. AP_J710FXXU2AQA8
3. CP_ J710FXXU2AQA4
4. CSC_J710FOXY2AQA2
• Download the zip package and unpack it. You'll get four .tar files
• Flash all the 4 files together via ODIN
• Enjoy
• (You can also use only the parts if u need not all 4 files. Well it's up to you)
Please read carefully the installation procedure because I'm not responsible for damage to your equipment or loss of warranty!
Credits
SAMSUNG (for the Smart Switch & ofcourse for the Stock ROM)
4PDA.RU forum http://4pda.ru/forum/index.php?showtopic=763247&st=0
(for providing the latest firmware for SM-J710FN )
Recommended Installation Flow:
FOR OBTAINING ROOT
1. Extract Odin v3.11.1.zip to your computer.
2. Install SAMSUNG_USB_Driver 1.5.61.0 for Odin to find your device.
3. Before flashing is better to go to recovery and do a FACTORY RESET of your phone
4. Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons
while your device reboots.
5. Open Odin as an administrator and choose your 4 files
1. BL_ J710FXXU2AQA8
2. AP_J710FXXU2AQA8
3. CP_ J710FXXU2AQA4
4. CSC_J710FOXY2AQA2
6. Wait for Odin to update the files
7. Connect your phone and wait for Odin to see it , then press Start and wait until you will see PASS and your phone will reboot.
8. Wait for the phone to reboot and do a minimum set up basic just to be able to open Developer options ( after rooting with TWRP you will do
again the set up because you will format data to eliminate encryption in order to be rooted)
9. In your ROM, go to Settings -> About device. Tap 7 times on Build number to enable Developer options.
10. Now go to Settings -> Developer options. (above About device)
You need to enable OEM unlock, otherwise you might end up with boot problems or be unable to flash later on.
11. Make sure your don't have Factory Reset Protection enabled in your Google account or you may never be able to boot again!
More information: https://support.google.com/nexus/answer/6172890?hl=en
12. Download the .tar image of TWRP for j7xelte (twrp-3.0.3-1 sm-j710fn).
13. Reboot your device into Download mode. To do this, select reboot from the power menu and hold the [Volume Down] + [Home] buttons
while your device reboots.
Once you reach the Download mode warning screen, press [Volume Up] to continue.
14. Open Odin and place that twrp-3.0.3-1 sm-j710fn tar file in the [AP] slot, under Options tab disable Auto Reboot, then press [Start].
15. Once the flash is complete (Odin should tell you in the log, and progress bar on phone should stop), you can pull the battery then place the
battery back in. Now hold [Volume Up] + [Home] + [Power] buttons until you reach recovery mode.
If you end up in stock recovery, start again from download mode step.
16. At this point, you will reach the screen asking you if you want to allow system modifications.
You will want to swipe to allow, otherwise the OS will replace TWRP once you boot!
17. FORMAT DATA to delete encryption without any patch kernel , the recovery will ask you if you are sure , write yes , and then you will see
there are no errors.
18. To be sure you are safe press DELETE Dalvik cache after FORMAT DATA.
19. Go back to TWRP and on the install choose SuperSU-v2.79-SR2.zip
20. After flash SuperSU-v2.79-SR2.zip you are rooted
21. Go to [Reboot] -> [System].
22. Enjoy the new J710FXXU2AQA8 rooted
Hope you will enjoy the new stock firmware on your J710FN
And for the one who really want all the Samsung crap application to be removed I found and did some changes on a zip made by @TENN3R (Originally made by @ambasadii . Thanks both of you man) and finally come here with this work. Hope you'll love it.
I have tested this zip few times on my device (SM-J710FN) and there's no any fc or issues. So i think it's worth trying.
But as we all say here, I'm not responsible if your device get bootloops, your wife hits you or your dog bites you for some reasons.
Do not forget to hit thanks button
This is made for my personal use of the phone , day by day , and the battery keeps for more than 2 days now.
If you want To know which apps it removes and if you want to keep some system apps, open zip, copy updater script on your pc, open updater script with notepad++, check all apps names one (takes hardly few minutes) and if you want to keep any app in system and don't want to remove it, just remove that whole line. For example, if you want to keep "GoogleContactsSyncAdapter", remove line contains that app name ? runs ("/sbin/rm", "-rf", "system/app/GoogleContactsSyncAdapter"); ? including semicolon same as shown here.
To install the Debloater script :
1. After you complete the setup of your phone with SuperSU-v2.79-SR2.zip
2. Copy J7_710FN_DeBloater2017 on your internal storage
3. Reboot to recovery
4. Flash this zip and wipe dalvik/cache
5. Reboot to system and you'll see that almost all junks is removed.
Please read carefully the installation procedure because I'm not responsible for damage to your equipment or loss of warranty!
As I said from the description , this stock firmware was made for my personal day to day use .
You have all the software used for this in the zip folder with the full description of the applications removed and how to !!!
Hope you will enjoy !!!
Download SM-J710FN 2017 folder from my MEGA folder and you will find everything you need !!!
https://mega.nz/#F!moNHVZ5a!uTp5rlV7oAQQGXDyumNnuQ
I want to install back old version
Any way?
haleem320 said:
I want to install back old version
Any way?
Click to expand...
Click to collapse
you can find on this link the service firmware for SM-J710FN with the 4 files .. and you can go back to what version you want ...
https://cloud.mail.ru/public/HCTK/Rp59xXwpL
i'm using J710FN and my phone is hard brick on Android 7.0 Nougat and can't flash rom with Odin because my phone was knox warranty void but i can flash rom if you backup your Rom for my phone. please help my
°•●•○《 #Disclaimer 》○•●•°Your warranty is now void.
I am not responsible for bricked devices, dead SD cards , ...
Please do some research if you have any concerns about Custom Recovery mods before flashing it!
Hi all
Today i'm gonna explain how to install TEAMWIN Recovery safley on J7(6) .........
i tested it on my SM-J710F
1. you have to download ODIN on your PC (easy to search about them in Google)
2. you have to download Samsung Smartswitch or Samsung USB driver on your PC
3. download TWRP for your J7 from the teamwin officially website (you have to download the .tar Form)
now .. to the Explaining :::::
I. after the installing the Samsung USB drivers and unzipping the ODIN
II. enable the Developer Mode in your device by pressing 7 times on ''Build Number'' in the Software info in the Settings
III. in the Developer mode enable OEM unlock and the USB Debugging
IV. now turn your phone off and turn it in the ''Download Mode'' on by pressing '`Volume down+home button+power`'
V. connect the phone to your PC with a USB cable (you have to open Odin before connecting)
VI. select TWRP file by pressing on ''AP'' on the Odin window
VII. unselect ''Auto Reboot'' in the options (it would been selected before as like as an official option)
if you didn't unselect it .. your operation wouldn't success
VIII. press START .. from the down and wait till you get ''PASS'' in the operation box
IX. now disconnect your phone from your PC and remove the Battery
X. wait about 7~10 seconds and reinstall the Battery .. power your phone into the Recovery Mode on by pressing '`Volume Up+Home button+Power`'
you will see your TEAMWIN Logo on your screen !!
Congrtulations .. you installed your TWRP successfully :laugh: :fingers-crossed:
Twrp in my j7 2016 is flash binarry error brick my phone and block flash stock rom with odin,how to fixed
Followed all steps to root phone.
But odin displays Fail (Auth) error. Not sure how to root my phone
Hello. I did root my phone few days ago using Odin, I can help you.
What do you need:
SuperSU ZIP File (For your Android version, to check in Settings -> About device) and copy it to phone memory
TWRP Recovery MD5 File (for Odin) (for your phone model, check in Settings -> About device)
Now steps:
1. Enable OEM Unlock in Developer Options (If not unlocked, Settings -> About device -> Tap "Build Number" 7 times)
2. Open Odin and select AP (maybe PDA)
3. Find your TWRP File and select it
4. Turn off your phone, go to Download Mode (Volume Down, Home and Power buttons), click Volume Up (once)
5. Connect your device to your PC (In Download Mode you need to see Odin Mode!)
6. If in Odin you have seen "Added!" click Start
7. If Odin will fail, try again (I needed to)
8. If you have already flashed TWRP, go to it (Volume Up, Home and Power buttons)
9. Go to Wipe option and swipe to do default wipe.
10. Now click Install, select your SuperSU file.
11. Swipe to do it (Zip authentication disabled!!!!)
12. After it's done, reboot your phone again to your OS.
13. Enjoy your new root!
Optional Step: download Root Checker from Google Play and check your root.
I hope I did help you.