Hello people i was using the new patch for 0% issue i mean the (fix arc, neo) upd v3.1 posted by Bazoocase and everything was all right,
i downloaded the app titanium and somehow i delete a file that i shouldn't delete, now my arc constantly reboot and when i try to charge with the official usb charger there is only a red light blinking for 2 or 3 minutes and then the phone turns on completely but after 1 or 2 minutes it shut down again and keep doing that all the time, tried to use the fast boot and does not recognize the phone, also tried to use the flash tool and no response,
every time i connect it to the computer it says device not recognized, i am desperate because i don't know what to do, maybe one of you guys can point me at the thread to solve this problem because i have been looking but i can't find the solution, or if somebody knows what to do plz enlight me since i am a really junior member
thks in advanced
Check this thread: http://forum.xda-developers.com/showthread.php?t=1312398
Reposting it here, since this is the Lenovo sub-forums. Probably may find more help here.
I was using the Allegro ROM for the A1000G and it was running fine and dandy without any problems. Last night I tried installing a game and after I restarted it, it didn't turn on. I thought that maybe the device had low battery or something. So I plugged it in and let it charge for an hour and it still didn't turn on. Than I let it charge overnight and in the morning, it still doesn't turn on. So I tried to flash the Stock ROM for Lenovo a1000g and I got an error saying the storage was different or something - Error 3182 Message: BROM ERROR: S_STORAGE_NOT_MATCH (3182) [Edit - Tried to find the error, this is the one]
It was probably because the Allegro ROM was installed before it stopped working. So after that failed attempt at Flashing the Stock ROM - I don't get the battery indicator anymore and no matter what I try inside SP Flash Tool, it doesn't detect the device and the flashing process doesn't work. I tried installing and uninstalling all the MTK and Mediatek drivers but still not working. It shows up as MediaTek DA USB VCOM (Android) but it doesn't disappear, unless I remove the usb cable.
Before when I flashed the Allegro ROM and as seen across other youtube tutorials and guide, the device would show up for 2-4 seconds before disappearing and the SP Flash Tool would start working. Now it is just blank and the MediaTek DA USB VCOM (Android) doesn't go, no matter what.
Please, I would appreciate help. Since I don't have much knowledge regarding this. What must I do? I am depending on you guys.
~Aaron.
Bump. Please someone help.
Hi.
My Leeco le s3 x626, helio x20 is bricked with red light.
I Just work with win7, Windows 10, but don't work.
It is recognised like
Mtk usb and with mtk preloaded.
Flashtool, with download give back error or doesn't start.
I see guide for mediateck x6...
b1gb1ng said:
Hi.
My Leeco le s3 x626, helio x20 is bricked with red light.
I Just work with win7, Windows 10, but don't work.
It is recognised like
Mtk usb and with mtk preloaded.
Flashtool, with download give back error or doesn't start.
I see guide for mediateck x6...
Click to expand...
Click to collapse
Hello, if you're still looking for a way to restore, then write to me in private messages, I'll help you with this deal)
bricked my Leeco le s3 x626
AxtExpos said:
Hello, if you're still looking for a way to restore, then write to me in private messages, I'll help you with this deal)
Click to expand...
Click to collapse
Hi, i am new to this and i just bricked my Le s3 x626. please help me. the phone is just showing a red blinking light when i connect the usb cable to charger or pc. tahnks
I have the same problem...
leeco le x626 red light brick
AxtExpos said:
Hello, if you're still looking for a way to restore, then write to me in private messages, I'll help you with this deal)
Click to expand...
Click to collapse
Please what is the solution i need help mine also bricked while trying to root
Hi,
i have the same problem - stuck on red light.
Its recommended to use SP Flashtool to flash Stock.
Before, installing correct VCOM drivers. I've done that successfully.
But now...
I need the Stock ROM for this LeEco Le S3 X626 WITH the scatter file (MT6797_Android_scatter) that is needed for SP Flashtool.
None of the downloadable Stock ROMs i could get contain this scatter file. These Stock ROMs are all for devices that can still access fastboot.
This brick, stuck on red light can't access fastboot anymore..........
Any help? i need this ROM with the scatter file... please!
majo334 said:
Hi,
i have the same problem - stuck on red light.
Its recommended to use SP Flashtool to flash Stock.
Before, installing correct VCOM drivers. I've done that successfully.
But now...
I need the Stock ROM for this LeEco Le S3 X626 WITH the scatter file (MT6797_Android_scatter) that is needed for SP Flashtool.
None of the downloadable Stock ROMs i could get contain this scatter file. These Stock ROMs are all for devices that can still access fastboot.
This brick, stuck on red light can't access fastboot anymore..........
Any help? i need this ROM with the scatter file... please!
Click to expand...
Click to collapse
I have the files you need.
blueasteroid said:
I have the files you need.
Click to expand...
Click to collapse
Hey, i also recently bricked my phone, it has the red light problem and i have the flash tool installed, i am looking for a rom with the scatter files or the files themselves since i can't access fastboot, could you send them over?
Here you have some.
https://www.leakite.com/2017/09/download-letv-le-s3-x622-stock-firmware-flash-file.html
https://bbs.le.com//zt/eui/le_2.html
https://mega.nz/#F!MI9w3T6L
password: !YMutE59mUDbdOs9BoYY59Q
https://www.youtube.com/watch?v=xOKFI_eFq9o
blueasteroid said:
Here you have some.
https://www.leakite.com/2017/09/download-letv-le-s3-x622-stock-firmware-flash-file.html
https://bbs.le.com//zt/eui/le_2.html
https://mega.nz/#F!MI9w3T6L
password: !YMutE59mUDbdOs9BoYY59Q
https://www.youtube.com/watch?v=xOKFI_eFq9o
Click to expand...
Click to collapse
i am panicked
so so so panicked
i tried everything i could already but it is giving me errors and the red led persists, i followed https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937 but it doesn't work at all, just gives me a lot of errors that when i google nothing turns up, when i try to flash only the preloader alone it gets me somewhat through the process but gets stuck and there pops up the same error as always, i will try your files (as i was using the ones provided in the tutorial) tomorrow and report back, thanks for posting them so quickly.
marksklava said:
i am panicked
so so so panicked
i tried everything i could already but it is giving me errors and the red led persists, i followed https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937 but it doesn't work at all, just gives me a lot of errors that when i google nothing turns up, when i try to flash only the preloader alone it gets me somewhat through the process but gets stuck and there pops up the same error as always, i will try your files (as i was using the ones provided in the tutorial) tomorrow and report back, thanks for posting them so quickly.
Click to expand...
Click to collapse
Read the last post in that thread. 2 days ago I was like you. Read carefully.
i don't know at all, but it actually sounds like u didn't have the correct files before... i hope at least! things should work out with tutorials and instructions, i mean we're not that dumb right? but if we don't have the exact matching files..........
i will also try the same procedure with the new files thanks ALOT to blueasteroid, and write my results here.......
marksklava, are u actually on a L3 x626 aswell? cause most seem to operate with a x622
majo334 said:
i don't know at all, but it actually sounds like u didn't have the correct files before... i hope at least! things should work out with tutorials and instructions, i mean we're not that dumb right? but if we don't have the exact matching files..........
i will also try the same procedure with the new files thanks ALOT to blueasteroid, and write my results here.......
marksklava, are u actually on a L3 x626 aswell? cause most seem to operate with a x622
Click to expand...
Click to collapse
i am on an x626, it has a 21 mp camera and i bought it from china, sorry for not replying for 4 days.
---------- Post added at 02:14 PM ---------- Previous post was at 01:50 PM ----------
I get errors still, i believe it is a drivers issue but i don't really know how to fix it, i have tried uninstalling the drivers and installing the ones needed but they do not work at all. What do i do now? Am i out of options? What are the drivers supposed to look and how do i install them? i installed the ones that were provided in the inf file, those give me error 10 and my phone keeps disconnecting and connecting on a different COM port, although the driver seems to be installed, can someone help? If anyone is kind enough to screenshare with me i can do that via skype, discord and teamviewer, i also found a 5 year old camera here so i can catch any errors on video with my phone in the frame now which could be useful. Thanks for reading this, please help me any way you can, every bit helps.
marksklava said:
i am on an x626, it has a 21 mp camera and i bought it from china, sorry for not replying for 4 days.
Click to expand...
Click to collapse
Don't panic, i figured out this thing yesterday with my x626, it was successful and was not too hard in the end! don't worry much about the drivers, its completely normal that u lose connection all the time, it happens to all of us with bricked LeEco. The drivers won't keep still for the procedure, its normal...... I worked with the drivers in the Unbrick LeEco folder from blueasteroid. I installed all the stuff there was, and Windows said: Preloader VCOM 10 - it still switched but this is normal!
It is necessary to have the correct files, the correct paths in SPFlashtool and it only worked (for me) with DA_PL_HIGH and the pressing of buttons on the phone (Pow and Vol- holding it all the time). There was no BROM Error anymore and it all worked out.
All i can say don't give up, i have been at this point since beginning of December and now i finally got it unbricked! as much BROM errors u get, don't lose patience, keep on doing... u will finally find the right timing by happenstanc and it will work. The part after it is not that problematic then.
Check this thread, its very active at the moment and imo very very helpful: https://forum.xda-developers.com/le-2/help/bricked-le-s3-x626-flashing-twrp-power-t3715937/page5
Read the last pages...
leeco s3 x626 bricked
i also have the same problem with 4gb-32gb from the first day . Bricked after "fastboot reboot" command.
I tried to repair with flash_tools.exe but without success. I also tried various drivers.
Hello.
If anyone can help me... LeEco X625, blocked on red led, not charging, not connecting on PC, just red led when connect.
NOT seen in device manager.
jonyx87 said:
Hello.
If anyone can help me... LeEco X625, blocked on red led, not charging, not connecting on PC, just red led when connect.
NOT seen in device manager.
Click to expand...
Click to collapse
Same problem with mine. I once hard bricked mine, but whenever i connect to PC it gives sound, i was able to restore the phone @Long run. Few weeks after, i went to charge the phone and the phone went off, ever since then, not charging, no signs nor sounds when connected to PC... Took it to Engineers and all they say is dat i need to change the board... I'm so sad because i used all the money in my account to get the phone. The phone is still enjoying inside my wardrobe
Really hoping someone can help me out here. I have a Nexus 6P, Non-BLOD. Yesterday, after clean flashing the latest version of EvoX, while setting some things up, device randomly crashed. No Shut down animation or anything. Just black screen. Tried turning it on via Power Button and then Power And Volume Buttons but nothing works. Connected it to PC and see it's Detected as Qualcomm USB Bulk (9008) in Coms and Ports. Did some research and found out I have to flash via QFIL. And this is where I am stuck. I tried several versions, but it doesn't flash/gives Shara error. I tried reinstalling driver. I also read a guide here. But the Firmware link is dead and it says to flash via MiFlash, something I can't even try since the Link in the OP is dead. I tried some different versions of QFIL but all of them give a Sahara Communication error. Now I'm pretty much at a loss on what to do. I'd really like to fix my 6P. And I would appreciate anyone taking the time to point me in the right direction, or help me fix it. Thanks in Advance.
DarthVader said:
Really hoping someone can help me out here. I have a Nexus 6P, Non-BLOD. Yesterday, after clean flashing the latest version of EvoX, while setting some things up, device randomly crashed. No Shut down animation or anything. Just black screen. Tried turning it on via Power Button and then Power And Volume Buttons but nothing works. Connected it to PC and see it's Detected as Qualcomm USB Bulk (9008) in Coms and Ports. Did some research and found out I have to flash via QFIL. And this is where I am stuck. I tried several versions, but it doesn't flash/gives Shara error. I tried reinstalling driver. I also read a guide here. But the Firmware link is dead and it says to flash via MiFlash, something I can't even try since the Link in the OP is dead. I tried some different versions of QFIL but all of them give a Sahara Communication error. Now I'm pretty much at a loss on what to do. I'd really like to fix my 6P. And I would appreciate anyone taking the time to point me in the right direction, or help me fix it. Thanks in Advance.
Click to expand...
Click to collapse
Same thing happened to me in the same ROM (Weird) .. but i managed to flash the qfil successfully .. but still phone doesnt boot up .. here's what you should do ... try to hard reset the phone until you hear the disconnecting sound from pc . Ready all the necessary flash in the qfil and as soon as u hear the device connected hit the download button .. it will flash without the sahara protocol error . Be quick ! tell me if that fixed ur problem . Peace
hk1271 said:
Same thing happened to me in the same ROM (Weird) .. but i managed to flash the qfil successfully .. but still phone doesnt boot up .. here's what you should do ... try to hard reset the phone until you hear the disconnecting sound from pc . Ready all the necessary flash in the qfil and as soon as u hear the device connected hit the download button .. it will flash without the sahara protocol error . Be quick ! tell me if that fixed ur problem . Peace
Click to expand...
Click to collapse
Thanks. Can you share the files you used please? I can't for the life of me, find the correct download files. There was a Nexus6P_Unbrick by TenFar but all the links are down.
DarthVader said:
Thanks. Can you share the files you used please? I can't for the life of me, find the correct download files. There was a Nexus6P_Unbrick by TenFar but all the links are down.
Click to expand...
Click to collapse
I used another qfil firmware
https://drive.google.com/file/d/1PixuumVVzxBKUsQ88X3AJ21Hsi2mV3Zq/view
Here is the link .. you can find the firehose and all files in the firmare folder . Best of Luck
I have a similar situation where I am unable to power on the phone in any way, and I am only able to communicate with the qualcom USB 9008 driver.
I am following your instructions using the firmware files you provided (thank you!) and I can see an attempt is being made to download the files before sahara error occurs.
I don't think I enabled developer options when my Nexus 6P was working and wondered if sahara error is due to that.
I was wondering if you had previously enabled developer options by tapping on the build number several times, once the operating system booted and if that is a critical step in being able to recover the Nexus 6p from this hard bricked state where I am stuck in EDL 9008 mode, and unable to access bootloader, and volume+power keys do not do anything...I feel like I'm screwed (and already moved on) but using time these days to learn about android devices!
thanks!
Hi All
I have a one plus 5 that all of a sudden wont turn on, stuck it on charge last night and then this morning will not boot
I can get it into fast boot mode but that is about as far as it goes, when I try and go to recovery mode the phone just shutsdown
Been searching the forum here and discovered some info about unbricking using MSMdownload tool in EDL mode, I have tried quite a few different drives and about 5 PCS's now all with the same result saying Sahara connection failed
I have also tried the ALL IN ONE TOOL to do the recovery flasher but bootloader is locked and wont allow it, I have not been able to find away to unlock it as everthing I have found says to unlock via the settings menu which obviously I cant get to as the phone wont boot
I was hoping just to extract some data from it at first but that is starting to look like it is not possible
if anyone has any tips that could help me out I would really appreciate it
Cheers
plnewton said:
Hi All
I have a one plus 5 that all of a sudden wont turn on, stuck it on charge last night and then this morning will not boot
I can get it into fast boot mode but that is about as far as it goes, when I try and go to recovery mode the phone just shutsdown
Been searching the forum here and discovered some info about unbricking using MSMdownload tool in EDL mode, I have tried quite a few different drives and about 5 PCS's now all with the same result saying Sahara connection failed
I have also tried the ALL IN ONE TOOL to do the recovery flasher but bootloader is locked and wont allow it, I have not been able to find away to unlock it as everthing I have found says to unlock via the settings menu which obviously I cant get to as the phone wont boot
I was hoping just to extract some data from it at first but that is starting to look like it is not possible
if anyone has any tips that could help me out I would really appreciate it
Cheers
Click to expand...
Click to collapse
@plnewton
Prior to your next posting please read the guidances that are stuck on top of every forum like
Note: Questions go in Q&A Forum
If you are posting a Question Thread post it in the Q&A forum. Technical discussion of Android development and hacking. No noobs, please. Device-specific releases should go under the appropriate device forum...
forum.xda-developers.com
and the others. I've moved the thread to Android Q&A as it didn't qualify for development.
Thanks for your cooperation.
Regards
Oswald Boelcke
Senior Moderator
plnewton said:
Hi All
I have a one plus 5 that all of a sudden wont turn on, stuck it on charge last night and then this morning will not boot
I can get it into fast boot mode but that is about as far as it goes, when I try and go to recovery mode the phone just shutsdown
Been searching the forum here and discovered some info about unbricking using MSMdownload tool in EDL mode, I have tried quite a few different drives and about 5 PCS's now all with the same result saying Sahara connection failed
I have also tried the ALL IN ONE TOOL to do the recovery flasher but bootloader is locked and wont allow it, I have not been able to find away to unlock it as everthing I have found says to unlock via the settings menu which obviously I cant get to as the phone wont boot
I was hoping just to extract some data from it at first but that is starting to look like it is not possible
if anyone has any tips that could help me out I would really appreciate it
Cheers
Click to expand...
Click to collapse
Maybe help
[OP8][OOS 21AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
joke19 said:
Maybe help
[OP8][OOS 21AA/BA/DA] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com
Click to expand...
Click to collapse
I have tried following that same procedure and cant get passed the Sahara communication failed error, tried different PC's with different USB ports and cables, also tried different versions of the MSMDownloadTool all with same error
plnewton said:
I have tried following that same procedure and cant get passed the Sahara communication failed error, tried different PC's with different USB ports and cables, also tried different versions of the MSMDownloadTool all with same error
Click to expand...
Click to collapse
Maybe here you find help
OnePlus 5
The OnePlus 5 is one of the most anticipated phones of 2017. The 5.5" AMOLED display has a 1920x1080p resolution. The Snapdragon 835 chipset is paired with options for either 6 or 8GB of RAM. Storage comes in 64 and 128GB options.The main camera on the OP5 has a dual lens setup with 20+16MP...
forum.xda-developers.com