Database Users

bricked!!!! Qualcomm HS-USB QDLoader 9008

hi
Sorry for my English
I wanted to root my phone but made ​​a mistake somewhere.
now the phone is always off. when connected to the computer, program RSD see him as QHSUSB_DLOAD; computer see him as Qualcomm HS-USB QDLoader 9008
RSD don`t flasing(The phone failed to switch to fastboot mode)(FAIL) flasing cabl dont helped.
How reestablished bootloader

nobody knows how to help me?

It appears that you have a corrupt boot loader and unfortunately we do not have any of the files available to us that would be needed to fix your phone.
They would be the proprietary binaries and low level boot images from Qualcomm for flashing to a new board at the factory.
We have such repair kits for some earlier OMAP based devices but I have not heard of or seen any such files for the Qualcomm S4 devices, sorry.

If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.

kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
how?

same problem
i have the same problem and the same brick. Can anyone help us?:crying:

+ to brick reason
Ral126 said:
i have the same problem and the same brick. Can anyone help us?:crying:
Click to expand...
Click to collapse
You forget, thats you also try to flash MIUI!

St.Noigel said:
You forget, thats you also try to flash MIUI!
Click to expand...
Click to collapse
Yes) I tried))) But for the beginning i need to reestablished bootloader.

ASUS PadFone 2 QHSUSB_DLOAD error
I've an ASUS Padfone 2 with the same error. Looks like it's kind of easy to get these Qualcomm devices into this f*cking issue
My case is detailed here: http://forum.xda-developers.com/showthread.php?t=2220775

kaskoraja said:
If you wish to make a clean install without bothering about backup and so and so then I can guide you through that.
Click to expand...
Click to collapse
Good evening,
I bricked the Innos D9 because I installed 2 new roms .........
I first stalled the DNS and it was a very nice rom but I was not 100% happy ...........than I installed the Cloudfone rom and this was very bad..........than I wanted to go back to the DNS rom and I got the same problem as yours.
I searched for a solution and I found a video on YouTube ..." Restore Acronis Backup on CloudFone Thrill 430X (Innos D9) " and after this experiment my Innos D9 is totally dead.....it isn't recognized by the computer ....not even by clicking or holding any button ..........when I connect the USB to my laptop I can only hear the sound that something has been connected to the laptop ........but nothing is visible.
any help to unbrick my phone?

One thing you could try is sending a message over to Josh at mobiletechvideos.com and see if he can help. It looks like they offer JTAG repairs for hard bricks(link).
Note: I don't work for mobiletechvideos or anything. I just had my Samsung Focus power button repaired by them a couple weeks ago and they did a pretty nice job.

I've got same problem with Asus Padfone A66.
I installed the qualcomm drivers, and QPST program is see my phone, but i have no idea howto use this program, or howto convert image files to (proper) .hex format, or howto build needed files. My cpu is MSM8260 and QPST see my phone as Q/QCP-XX (Download). And maybe I need for a proper MPRG8260.hex and aml, mbm files for flashing. so QPST sjust throwing error, ahnd happen nothing.

http://forum.xda-developers.com/showpost.php?p=45548210&postcount=3

Hello everyone, I'm having the same problem .
Someone found a solution to this problem?
I have a RAZR HD .
Thank's

How to fix a galaxy j1 SM-j100h hard brick

Hi, i want to fix a phone of my friend by flashing it with odin, but things go wrong, the phone after failing wont start or respond to any button, i dont know what to do, please any help would be appreciated
Samsung Galaxy J1 SM-J100H
Edit:
Thanks xEmre66 for your reply, unfortunately no, i think i break the boot image, the phone wont boot on download mode even if i use 300k jig, i think the only solution is to use an sd card filled with the boot image, but i dont find in website a solution like that.

I tryed many solution but no one work, please if someone have the some problem tell me.

Can you get into the DownloadMode? (ODIN MODE)???
Sent from my SM-J100H using XDA-Developers mobile app
---------- Post added at 08:58 AM ---------- Previous post was at 08:57 AM ----------
I have this phone but it is not my main phone but maybe I can help you.
Sent from my SM-J100H using XDA-Developers mobile app

i'm working on this problem..
i resolved,
share there

OSKCHAST said:
i resolved,
share there
Click to expand...
Click to collapse
Please can you share the solution ?, i cant fix the phone.

same problem here
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???

caseres84 said:
I have same problem here, samsung j100h of my friend do not boot, i download odin and correct rom to flash i flashed device correctly, but device now is fully dead, display not start, black screen, my win10 not recognise device, now cant flash using odin and using sp_flashtool....
device respond at win10 when i push vol up + power but can't make anything
i try to install all drivers signed and unsigned from samsung and mkt.. nothing works any idea???
Click to expand...
Click to collapse
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.

xEmre66 said:
You broke the boot image. I'm sorry but you hard bricked the device. I had this phone but it was terrible because of its touchscreen. Maybe I could help you. Send me a PM and describe how you really broke the device.
Click to expand...
Click to collapse
same in here. I flash original rom from sam mobile site and my samsung sm-j100h is bricked now. i flash using odin and everthing was ok and it was pass. but nothing happend later on, screen remains black and I don't know what to do.
or atleast tell me can I get somehow all data stored on phone, if yes how to do it

guys still nothing???
same problem guys i bricked the phone 2 days ago with the original firmware from sam mobile u.u i put my samusung j1 in download mode and with odin i done the reflash odin it was green and said me passed but then when i tried to turn on the phone nothing happened my phone is died hard bricked is there a guys something to do to repair him?

i got the same problem..
the phone was completely DEAD after i followed all the instructions here => https://www.youtube.com/watch?v=1T9fxno2s68
Please somebody help us..
Here's my thread => http://forum.xda-developers.com/android/help/help-sm-j100h-dead-power-flash-t3511894
Thank you very much..

im using sm j110h and i too flashed orginal stock rom via odin but unfortunately i forget to put the batteries on and i fonud that after that i got pass message only now the screen remaines black and not getting to download mode and not switching on. does anyone help me on this problem hope will get a solution thanks in advance

Gal J1 of sadness.... but still hoping
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:

Chrisjopett said:
2 days ago a friend asked me to fix his J1 stuck in boot image. I gladly said yes for I've done it 4x already different units same model with satisfying results. This one is the exact opposite because after flashing with Odin and getting the Passed result, the phone didn't reboot. Actually it never booted right after that moment. System didn't recognize the phone not even a dim light or blink or any reaction from it even when plugged in a wall charger. tried all possible solutions even the galaxy tab procedure of total batt drain and so on. The firmware I got is from xda, J100MLDXU0AOB3_OLC0AOB5_v4.4.4_Repair_Firmware.zip, and I'm sure it's fine because I've used it already with good results...
Guys, any of you with a solution on this or any suggestions would be much appreciated... Thanks very much in advance!!! :fingers-crossed:
Click to expand...
Click to collapse
PM me pls and tell me how you flashed it etc.

Help
I have same problem,hard brick.Can anyone help?

somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:

kkq29 said:
somebody got solution? i did update by kies and now the phone is dead at all. i can use odin mode and also can using recovery anymore. hmm i think my problem come from the battery :crying:
Click to expand...
Click to collapse
Can you get into Odin Mode? If yes, flash the stock firmware of your region (here is a fast server which provides very fast downloads: fw.updato.com) If no, then you should change your battery as you're saying "it came from my battery" and try the first step again.
If it doesn't help as expected, then your phone is hard bricked and can't be repaired at all. The only solution would be changing the motherboard, but I would not waste my money on a low-end device motherboard and I would directly buy a new phone. :/
Regards,
xEmre66

If I am correct...
Then SM-J110H have Spreadtrum SC7727S
Here is Pinout for Direct eMMC...
https://postimg.cc/image/ul680l5jv/
This Pinout seems also to work with:
Code:
SM-G318HZ
SM-Z130H
I have leaked SM-Z130H PDF... where Instruction is inside to repair with tweezer... USB cable + Spreadtrum Tool:
Code:
[B]ResearchDownload[/B]
In theory something similar should be possible with SM-J110H...
I have at the moment only 1 problem... to create PAC file...
No idea from where I can get:
Code:
FDL1
FDL2
Best Regards
Edit 1.
Sorry, seems I was drunken...
It is sooo hard to find Posts or Threads about SM-J110H...
But it seems SM-J100H also Spreadtrum device...

xEmre66 said:
PM me pls and tell me how you flashed it etc.
Click to expand...
Click to collapse
PM me too please
My teacher phone has a same problem, hehehe.

same problem here. my phone got stuck up with samsung logo then i just dowloaded a firmware on sammobile and i flash it via odin at first it passed then my phone did'nt turn on anymore.

J100H / DD Finding Deadboot solution
Hi ... guys me too having this sort of problem and i found bad about samsung using 32bit - Spreadtrum SC8830A EMMC chipset here
Fix solution Not Found still! if i done i will tell you!
on = SM-J100H/DD --- corp =samsung yateley, uk
ok friend iam searching for Solution for 3days bt i found none= with a clue
It is J100H on serial port= SPRD U2S Daig (ComXX) usb says= SPRD COM Emumerator
this means - all sprd flashing been done on this 2 port only - in Miracle Box it says -
Scanning USB Serial port...
SU2Serial Port: COM64
Connecting to Phone,Wait..
Done.
Infor: SPRD3
Initialize boot19...
>>BootLoad Error. ID: 1
so my option is if we build a sprdp.bin and flash in AP(PDA) it will boot to Download mode
and dont ask me where is that file i dont no - if any one can provide a real backup pit.pit file
via phone to me i can find something and let u know it. Only from a alive phone J100H/DD
plz friends i need help any dumps or pit. and if any one has a alive J100H/DD please tell me.!
so i can get some help from u --If you wish to help

Leeco Le S3 x626 red led of death brick

Please help, so i just bought this phone, the LeEco Le s3, and i bricked it while installing TWRP, now every method i have tried i got some kind of error, the SPFT method just gave me endless errors and failed to upload even when tweaking settings and even having the correct folders, feel free to ask anything and i will respond, but ask a lot, because my phone is bricked and i really need it but can't figure out how to fix it at all, for the record, the phone has a Helios X20 and is the x626 version, i can't even use fastboot on it, it doesn't recognise the device. I will edit this with every question asked and post the results, if my problem is fixed this can act as a thread for x626 users trying to fix the same problem, thanks.

Try to uninstall all drivers of your device , use USBDeview to uninstall hidden and follow this
USBDeview
http://www.nirsoft.net/utils/usb_devices_view.html
https://forum.xda-developers.com/android/help/guide-leeco-le-s3-x626-x622-unbrick-t3705542

marksklava said:
Please help, so i just bought this phone, the LeEco Le s3, and i bricked it while installing TWRP, now every method i have tried i got some kind of error, the SPFT method just gave me endless errors and failed to upload even when tweaking settings and even having the correct folders, feel free to ask anything and i will respond, but ask a lot, because my phone is bricked and i really need it but can't figure out how to fix it at all, for the record, the phone has a Helios X20 and is the x626 version, i can't even use fastboot on it, it doesn't recognise the device. I will edit this with every question asked and post the results, if my problem is fixed this can act as a thread for x626 users trying to fix the same problem, thanks, i am sorry for this frantic language, i am just really panicked.
Click to expand...
Click to collapse
you need flash it at MTK SP tools. it will unbrick it .

My LeEcho S3 X626 did the same thing, but not while installing anything. I put it on the charger overnight and now it only shows the red charging light when plugged in, it won't boot and and it won't do anything. Win 10 computer doesn't recognize it, so how can I get into it? There's no android boot screen, nothing. I've tried power and volume up volume down, there is no response at all!

Pls my letvleeco is dead it only shows a red notification light when it's plug in with d cable and my pc does not detect it and it won't boot up or display anything on d screen

I'm trying to unbrick my x720 by QFIL but my pc won't recognize Qualcomm 9008 port

My problem is that I can't even try to do the procedure in the other threads that i've read because my pc simples dont recognize anything when i install the qualcomm drivers. Any tips? Thank you in advance. I want to try this thread [GUIDE][QFIL MODE]Unbrick your Le Pro3, tested and working. But simply the qualcomm port doesnt appear in the device manager.

Bad cable or need to reinstall drivers...

marik1 said:
Bad cable or need to reinstall drivers...
Click to expand...
Click to collapse
I tried with two different cables and reinstalled the drivers a few times now. No port in the device manager. Just the Android ADB Interface tha showed when I installed the leeco adb drivers. On the ports just appear the standard Comunication port and printer port. I tried everything, the volume bottons power, etc. The Flash One dont recognize the phone for QFIL.

Say sth more about your phone state and history...

marik1 said:
Say sth more about your phone state and history...
Click to expand...
Click to collapse
I dont have hardware problems. I flashed the Pixel Experience rom in february with sucess but I didnt like it. It had too much battery drain. Then I wanned to try some other rom like AICP. But in the process of flashing something went wrong. I wasnt able to flash it, always gave me the error 7. Then it simply died. I was rebooting TWRP mode and it went dead. Now just vibrates when I try to turn on. I tried the QFIL process (both volumes + power) but I dont even know. How can we know that it in qfil mode? My pc wont recognize anything. Not in Flash One, Not in QPST, nothing. Am I doing something wrong? The phone vibrates so its charged. I installed the Qualcomm drivers properly, I thing, eventhow it doesnt appear the qualcomm 9008 port in the device manager. Its suppose to appear before the phone is pluged right? Thank you for the reply.

I've no idea how to help you... Sorry.

gradim said:
I dont have hardware problems. I flashed the Pixel Experience rom in february with sucess but I didnt like it. It had too much battery drain. Then I wanned to try some other rom like AICP. But in the process of flashing something went wrong. I wasnt able to flash it, always gave me the error 7. Then it simply died. I was rebooting TWRP mode and it went dead. Now just vibrates when I try to turn on. I tried the QFIL process (both volumes + power) but I dont even know. How can we know that it in qfil mode? My pc wont recognize anything. Not in Flash One, Not in QPST, nothing. Am I doing something wrong? The phone vibrates so its charged. I installed the Qualcomm drivers properly, I thing, eventhow it doesnt appear the qualcomm 9008 port in the device manager. Its suppose to appear before the phone is pluged right? Thank you for the reply.
Click to expand...
Click to collapse
Instead of creating a new post why not just read the enormous unbrick forums that exists and have proven steps. Many, Many phones have been debricked using those steps.
Hint, read the last pages for updated links to the software tools needed.
Next, I just found this cable which will help immensely with unbricking your device: https://www.amazon.com/GPG-EDL-Cabl...r1&keywords=edl+cable+for+wall+qualcomm+usb+c

tsongming said:
Instead of creating a new post why not just read the enormous unbrick forums that exists and have proven steps. Many, Many phones have been debricked using those steps.
Hint, read the last pages for updated links to the software tools needed.
Next, I just found this cable which will help immensely with unbricking your device: https://www.amazon.com/GPG-EDL-Cabl...r1&keywords=edl+cable+for+wall+qualcomm+usb+c
Click to expand...
Click to collapse
I've tried four different cables now and nothing. Thank you for minding but I think there isn't a solution for my leeco. Its dead and no one can help him.

Is yours 722?
Sent from my SM-A730F using xda premium

mchlbenner said:
Is yours 722?
Sent from my SM-A730F using xda premium
Click to expand...
Click to collapse
No, x720 6gb ram 64 rom.

gradim said:
No, x720 6gb ram 64 rom.
Click to expand...
Click to collapse
Is your phone completely Dead or do you have fashboot or anything working.
Do have a red flashing light?
Sent from my SM-A730F using xda premium

mchlbenner said:
Is your phone completely Dead or do you have fashboot or anything working.
Do have a red flashing light?
Sent from my SM-A730F using xda premium
Click to expand...
Click to collapse
Completely dead, just vibrates when I press power and yes, I sometimes have the red light, sometimes flashing, sometimes stable.

gradim said:
I dont have hardware problems. I flashed the Pixel Experience rom in february with sucess but I didnt like it. It had too much battery drain. Then I wanned to try some other rom like AICP. But in the process of flashing something went wrong. I wasnt able to flash it, always gave me the error 7. Then it simply died. I was rebooting TWRP mode and it went dead. Now just vibrates when I try to turn on. I tried the QFIL process (both volumes + power) but I dont even know. How can we know that it in qfil mode? My pc wont recognize anything. Not in Flash One, Not in QPST, nothing. Am I doing something wrong? The phone vibrates so its charged. I installed the Qualcomm drivers properly, I thing, eventhow it doesnt appear the qualcomm 9008 port in the device manager. Its suppose to appear before the phone is pluged right? Thank you for the reply.
Click to expand...
Click to collapse
Your phone is probably fixable.
Based on what you stated above, it seems that you downloaded and attempted to install the wrong version of TWRP and now your phone has no recovery at all.
Here is partial instructions I posted in the unbricking forum : https://forum.xda-developers.com/showpost.php?p=76100899&postcount=121
Use those instructions along with is mentioned below. I have personally helped so many people unbrick their phone that I have lost track and this is the reason why the posts are so long and extensive. Because sometimes what works for one person does not work for the next. So I have essentially have taken everyone's great advice and updated the links, made the instructions steps a little more concise and easier to read, fixed some incorrect steps or added the needed skipped steps. Plus added my own research into what I believe is now a definitive guide for unbricking the Leeco variants X720 and X727. The point of not reposting the information here is to keep everything from becoming more fragmented.
Yes, it's possible that you have a hardware issue. But, its also possible that it can be fixed!
Remember that you will not see the port unless you are in EDL mode
Just press volume △ (+) and volume ▽ (–) buttons together while powering the phone on.
It should now be EDL mode. If you cannot get into EDO mode, you cannot do anything else.
If you get an error, press and hold the power button while at the same time hold vol up + and down simultaneously plug the usb cord into the back of the computer while holding the buttons.
Yes, It's a pain and this is why the deep flash cable is handy....it's a special cable ( so your extra cables will do nothing to help you) The deep flash cable will automatically put your phone into EDL mode and allow you to use Flash on.
Install the Qualcomm QDLoader 9008 driver: https://goo.gl/9E3bKq or the from links provided in the unbrick forum.
There are multiple versions or Qfil, some have issues. I posted the correct one that works.
FOR anything else go to that forum read my and everyone else's posts. Again, I keep all of my linked files are up to date, and many are located on my own drives.
You can make one of these cables. Here's a video that shows you how:
https://www.youtube.com/watch v=kSiGsYK66gM&lc=z220yhtqvwyyct21pacdp432sh2xjecek10dae1jen5w03c010c.1524884617336803
it will not be a quick fix.
There are 4 or 5 different unbricking options and it requires persistence and patience.
The good news is that your phone has a solution that may work.

So when your where flashing a rom you got error 7 and your phone went dead.
I had gotten that same error.
Error could mean two things 1) update recovery or update firmware.
My point is sounds nice like hardware issue.
These phones are known for just dieing.
Also getting into that mode you have to push power+volume+volume- at the same time.
Sent from my SM-A730F using xda premium

unable to flash lenovo a1000

Hello everyone, so here i am trying to flash a friend's a1000, but unfortunately, i'm unable to do so because when i try to enter the bootloader by holding the volume up key before plugging in the usb cable to start the process, it only connects to the computer for about 9 seconds, and then automatically disconnects, i get a coloured screen afterwards, and i would be forced to restart the device, i first suspected that it was the cable, but i was wrong, since i've already tried a bunch of cables, all with the same exact result, i also used 3 different computers, and i still got the same result, please respond if you have any idea.

Sisine said:
Hello everyone, so here i am trying to flash a friend's a1000, but unfortunately, i'm unable to do so because when i try to enter the bootloader by holding the volume up key before plugging in the usb cable to start the process, it only connects to the computer for about 9 seconds, and then automatically disconnects, i get a coloured screen afterwards, and i would be forced to restart the device, i first suspected that it was the cable, but i was wrong, since i've already tried a bunch of cables, all with the same exact result, i also used 3 different computers, and i still got the same result, please respond if you have any idea.
Click to expand...
Click to collapse
you need drivers to flash it. i flashed mine in september 2021 and most drivers didnt work. i ended up getting drivers with the same name for a diffrent phone and the flash worked. so try doing that it might end up working. i dont how i did it but it was really hard

Vuk1152 said:
you need drivers to flash it. i flashed mine in september 2021 and most drivers didnt work. i ended up getting drivers with the same name for a diffrent phone and the flash worked. so try doing that it might end up working. i dont how i did it but it was really hard
Click to expand...
Click to collapse
You're right, it is hard indeed, i've already tried so many drivers, i think i'm giving up lol, thanks a lot for the reply, i really didn't expect one since that specific phone is ages old by now !

Sisine said:
You're right, it is hard indeed, i've already tried so many drivers, i think i'm giving up lol, thanks a lot for the reply, i really didn't expect one since that specific phone is ages old by now !
Click to expand...
Click to collapse
thanks. i replied this cause i have the same phone which i want to custom rom but there arent any roms available.(if you have any roms, please let me know)i can try to find you the youtube video i used for the drivers if you tell me what they are called. (if you want to xd) i think its something like "mediatek drivers"

Vuk1152 said:
thanks. i replied this cause i have the same phone which i want to custom rom but there arent any roms available.(if you have any roms, please let me know)i can try to find you the youtube video i used for the drivers if you tell me what they are called. (if you want to xd) i think its something like "mediatek drivers"
Click to expand...
Click to collapse
I appreciate that, i'll let you know if i find a compatible rom for the device, i think the drivers are called CDC drivers if i remember correctly, i don't have the files, but i'm almost sure it's CDC, i'll be grateful if you can send me a link to that video.

Sisine said:
I appreciate that, i'll let you know if i find a compatible rom for the device, i think the drivers are called CDC drivers if i remember correctly, i don't have the files, but i'm almost sure it's CDC, i'll be grateful if you can send me a link to that video.
Click to expand...
Click to collapse
i dont think i ever used that cdc thing when flashing that phone. im pretty sure i used https://firmwarefile.com/lenovo-a1000 to get the stock firmware and just searched up "(driver name) download" on youtube and used some indian guys tutorial. you can try this video if you havent alredy (for the cdc driver)

Vuk1152 said:
i dont think i ever used that cdc thing when flashing that phone. im pretty sure i used https://firmwarefile.com/lenovo-a1000 to get the stock firmware and just searched up "(driver name) download" on youtube and used some indian guys tutorial. you can try this video if you havent alredy (for the cdc driver)
Click to expand...
Click to collapse
I'll try that one, thank you.

Sisine said:
I'll try that one, thank you.
Click to expand...
Click to collapse
np

Do you guys still have the files?
I managed to get the proper drivers and the phone is seen by the computer and I manage to flash it , but the phone is completly dead after the flash .
The power button wont do anything, plugging it into the charger doesnt do anything, I can only reflash it by connecting it to the pc while holding the volume up & down buttons.
Checking on old forums, aparently there are two versions of the phone , single sim and dual sim.
Also the revision number seems to be important for some reason, so mines is dual sim , revision 61 .
I believe this was the firmware that was on it previously, although the phone remained stuck at the boot logo : a1000_usr_s29798_1511241708_sprd7731_ro , but i cant find it anywhere , so I flashed the one you guys had , but now the phone is a dead brick after the flashing ends . Nothing on the screen, no response from any of the buttons, just dead.

CurlyBlonde said:
Do you guys still have the files?
I managed to get the proper drivers and the phone is seen by the computer and I manage to flash it , but the phone is completly dead after the flash .
The power button wont do anything, plugging it into the charger doesnt do anything, I can only reflash it by connecting it to the pc while holding the volume up & down buttons.
Checking on old forums, aparently there are two versions of the phone , single sim and dual sim.
Also the revision number seems to be important for some reason, so mines is dual sim , revision 61 .
I believe this was the firmware that was on it previously, although the phone remained stuck at the boot logo : a1000_usr_s29798_1511241708_sprd7731_ro , but i cant find it anywhere , so I flashed the one you guys had , but now the phone is a dead brick after the flashing ends . Nothing on the screen, no response from any of the buttons, just dead.
Click to expand...
Click to collapse
sorry, i deleted my lenovo a1000 files to focus on other phones. from what i have heard that issue is common with that phone. i know someone who flashed the firmware on their a1000 and got stuck in the same issue as you. i tried to help them unbrick it but it seems to be impossible. i think you need to do a board replacement if you want to use that phone again. also, i dont think that the phone revisions are that important cause i managed to get lenovo a1000m firmware on my lenovo a1000.