Hi All.
Anybody can help me with volume/canbus problem ?
I bought unit like in subject.
If i set can bus driver (Volkswagen -> compatible -> RZC(R_XP)_High ) then can't volume down/up.
Slider works but no sound control.
If i set can bus driver to none volume control backs.
Car is VW Golf V 2007 without multifunction wheel.
----- edit------
Resolution: For VW Golf V set RZC(R_XP)_Low driver for canbus
And another one question.
what application is responsible for car image on the rear camera view (left side of the screen)? This is gone too
---edit---
Resolution: Turn on "Radar display" in settings
Thank you
Some info about device if anyone is thinking of buying it:
Unit is very fast and smooth.
Everything starts immediatelly with no any lag.
Very interesting is start of the unit. Is starting with 2-3 seconds Ofcourse no battery drain. Some kind of sleep ?
PS.
Sorry for my english
Canbus high is wrong.
Got a Touran 2007 and had to take the simple canbus setting in my erisin 3015.
Got no multi wheel too.
Getapped and getalked with 6603
makes2068 said:
Canbus high is wrong.
Got a Touran 2007 and had to take the simple canbus setting in my erisin 3015.
Got no multi wheel too.
Getapped and getalked with 6603
Click to expand...
Click to collapse
Hi makes2068
Did you have problem with volume too ?
In my case volume not working bat can informations are presented in the app.
One time I got no sound at all.
Maybe it depends on the mcu. Try a different one that fits your unit and see what happens.
Getapped and getalked with 6603
Only one navigation app can be used simultaneously with music/radio....the one you configured under gps option in settings
Enviado desde mi D6603 mediante Tapatalk
Thanks for the answers.
I play with the unit today.
makes2068 said:
Canbus high is wrong.
Got a Touran 2007 and had to take the simple canbus setting in my erisin 3015.
Got no multi wheel too.
Getapped and getalked with 6603
Click to expand...
Click to collapse
makes2068 you have the right.
RZC(R_XP)_Low driver do the job
Thank you.
ikerg said:
Only one navigation app can be used simultaneously with music/radio....the one you configured under gps option in settings
Enviado desde mi D6603 mediante Tapatalk
Click to expand...
Click to collapse
I tested today and you have right.
If i set navi app then i can listening radio/music with navigation running.
Thank you.
But what if i have two navigations (speed radar detector) and regular navi ?
But this is question for Joying developers...
Hello
I've a Dasaita MTCD-PX5 unit on a MazdaSpeed 3 2012. So far working great with the exception of the Phone Steering Wheel Controls. Those are supposed to work with some "dirty tricks" and special cabling. Somebody was able to make it work but the copy&paste of the instructions by Dasaita was a disaster...
Has anybody been able to set that up to work? Or does anybody by chance knows where can I get the schematics of the cabling of the original car Bluetooth unit to see if I can figure it out?
Thanks !!!
Max
Do you have can bus?
Enviado desde mi SM-G950F mediante Tapatalk
ikerg said:
Do you have can bus?
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
Yes, the CanBus decoder came with the device. Volume/Mode/Next-Previous work OK. Is the phone functions (Answer/Hang-up/Voice command) the ones that do not work.
Max
When you have can bus installed...the learning SWC app does not work as the buttons are predefined by the can bus.
Which can bus options have you set up on the factory settings?
Enviado desde mi SM-G950F mediante Tapatalk
As i remember when I was investigating about how to connect my Mazda cx5 to a MTCD without can bus i realized that key 1 and key2 had to be connected to two different pins into Mazda connector.
Key1 enabled volume&track buttons...and key2 enabled phone buttons...let me check if I have some information about that in order you could check it.
Which other car functionalities enables your can bus apart the swc?
Check this photo
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Perhaps you can wire directly your key1 and key2 directly to the head unit bypassing the can bus (as in Mazdas the signals are resistive and detected by head unit and they can be remapped to the android functions you want by SWC learning app)
Enviado desde mi SM-G950F mediante Tapatalk
Do you have to connect Key2 to the pin in the ISO port?
Sent from my SM-N910F using Tapatalk
What I am.saying is that he has to check the wires. Key 1 and key2 shall be connected to the head unit...direclty or by canbus
Enviado desde mi SM-G950F mediante Tapatalk
I'm not sure how it can be connected directly to the head unit? Are there any schematics?
Sent from my SM-N910F using Tapatalk
Sassokee said:
I'm not sure how it can be connected directly to the head unit? Are there any schematics?
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
You have an adhesive with the schematics for the connectors on the head unit.
Enviado desde mi SM-G950F mediante Tapatalk
ikerg said:
As i remember when I was investigating about how to connect my Mazda cx5 to a MTCD without can bus i realized that key 1 and key2 had to be connected to two different pins into Mazda connector.
Perhaps you can wire directly your key1 and key2 directly to the head unit bypassing the can bus (as in Mazdas the signals are resistive and detected by head unit and they can be remapped to the android functions you want by SWC learning app)
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
Thanks for the info !!!
So, haven't had time yet to check it, but I'm almost sure the unit had the CanBus connections and the 2 cables labeled Key1 and Key2 floating arround (without any connector). So, you suggest that I use the picture to check which cable is Key1/Key2 on the car side and connect them directly instead of connecting them to the CanBus decoder, right?
Which app do you suggest for the learning/controlling? There's one that came with the Stock SW (Malasyk), but that didn't seem to work (now I understand why, there was nothing to learn, the CanBus controller is doing all the work)
Also, if I connect only Key2, should that work?
Thanks in advance
Max
maxiauer said:
Thanks for the info !!!
So, haven't had time yet to check it, but I'm almost sure the unit had the CanBus connections and the 2 cables labeled Key1 and Key2 floating arround (without any connector). So, you suggest that I use the picture to check which cable is Key1/Key2 on the car side and connect them directly instead of connecting them to the CanBus decoder, right?
Which app do you suggest for the learning/controlling? There's one that came with the Stock SW (Malasyk), but that didn't seem to work (now I understand why, there was nothing to learn, the CanBus controller is doing all the work)
Also, if I connect only Key2, should that work?
Thanks in advance
Max
Click to expand...
Click to collapse
Try with key2 only to check if works because it seems that key1 should be used by can bus (if not you will not have volume/track controls)
Enviado desde mi SM-G950F mediante Tapatalk
I found that I needed to connect my 2009 Mazda 6 to Eincar head unit as follows:
EINCAR - SW1 goes to Mazda SW1
Eincar - SW2 left unconnected
Mazda SW2 connected to car chassis ground
The steering wheel resistor/switch network in my car had no ground connection, but the head unit was monitoring resistance to ground to detect button pushes. With no ground connection it always read infinite resistance and did nothing.
ikerg said:
As i remember when I was investigating about how to connect my Mazda cx5 to a MTCD without can bus i realized that key 1 and key2 had to be connected to two different pins into Mazda connector.
Key1 enabled volume&track buttons...and key2 enabled phone buttons...let me check if I have some information about that in order you could check it.
Which other car functionalities enables your can bus apart the swc?
Check this photo
Perhaps you can wire directly your key1 and key2 directly to the head unit bypassing the can bus (as in Mazdas the signals are resistive and detected by head unit and they can be remapped to the android functions you want by SWC learning app)
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
Hi, I can't figure out which are the connectors for Key1 and Key2 as the quality of the image is very poor, do you have any better image? I tried googling but couldn't find any better..
There are wires connected to the Mazda radio harness for Key1 and Key2, Key2 is actually ground.. Do I need to cut those and connect the ones that are loose in the head unit?
Thins is really confusing and all the Chinese sellers are very unhelpful probably because of the language barrier...
As the OP mentioned it, it's mainly for the phone buttons (Answer, hang up, speech) as I want to use them too...
If someone has a schematic (Even lines drawn in MS Paint just to make it clear), that would be great.
Thanks
Sent from my SM-N910F using Tapatalk
If anyone has information regarding this, that would be great, I spent the last couple of days googling this to no avail... From what I understood, all needs to be connected is Key 1 from the head unit to Key 1 in the car radio harness and the same for Key2, then I would be able to remap all the steering wheel buttons including the Bluetooth buttons.
What I don't understand is that the Key1 and Key2 on the car radio harness already have wires connected to them from the head unit side, those wires are going to the CanBUS decoder, can I just cut the 2 wires and connect Key1 and Key2 to them?
@ikerg, you seem to be experienced with this, can you please clarify/confirm it?
Thanks
Sassokee said:
If anyone has information regarding this, that would be great, I spent the last couple of days googling this to no avail... From what I understood, all needs to be connected is Key 1 from the head unit to Key 1 in the car radio harness and the same for Key2, then I would be able to remap all the steering wheel buttons including the Bluetooth buttons.
What I don't understand is that the Key1 and Key2 on the car radio harness already have wires connected to them from the head unit side, those wires are going to the CanBUS decoder, can I just cut the 2 wires and connect Key1 and Key2 to them?
@ikerg, you seem to be experienced with this, can you please clarify/confirm it?
Thanks
Click to expand...
Click to collapse
Key1 and key2 are needed for swc control and for retrieving can bus information.
Obviously if you have a can bus connected to your headunits....that wires are already used by can bus.
Try first by removing the can bus.. if all your SWC buttons are responding on the headunit
Enviado desde mi SM-G950F mediante Tapatalk
ikerg said:
Key1 and key2 are needed for swc control and for retrieving can bus information.
Obviously if you have a can bus connected to your headunits....that wires are already used by can bus.
Try first by removing the can bus.. if all your SWC buttons are responding on the headunit
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
Thanks, I will try that and see how it is, but I guess I would lose other features from the CanBUS (Illumination, Reverse trigger for the camera)?
I will probably try to post on a Mazda 3 forum to see if people have information about it. Do you think Key1 is the 5V from the head unit and Key2 is GND?
I will try to unplug the head unit, use a multimeter and press the buttons to see if I get any readings, I will update this here.
From what I understood, you removed your CanBUS decoder and hard wired everything on your Mazda right? Can you please tell me more details about which wires you connected other than Key1 and Key2?
Thanks in advance, you are very helpful.
Sassokee said:
Thanks, I will try that and see how it is, but I guess I would lose other features from the CanBUS (Illumination, Reverse trigger for the camera)?
I will probably try to post on a Mazda 3 forum to see if people have information about it. Do you think Key1 is the 5V from the head unit and Key2 is GND?
I will try to unplug the head unit, use a multimeter and press the buttons to see if I get any readings, I will update this here.
From what I understood, you removed your CanBUS decoder and hard wired everything on your Mazda right? Can you please tell me more details about which wires you connected other than Key1 and Key2?
Thanks in advance, you are very helpful.
Click to expand...
Click to collapse
I had first a MTCD without can bus...so I connected the key1 and key2 wires properly to specific pins into the Mazda adapter and it worked.
Then I realized that I needed a can bus for reverse signal....so I bought a Pac rp4-mz11. Even not necessary it converts as well the swc signal to standard brand SWC signal...and it worked
On my last head unit (specific for Mazda cx5) it comes with can bus and it was a plug and play procedure....everything works as expected.
I have only one button that it is not preasigned...and I had to assign ton an action by mtcdtools.
Enviado desde mi SM-G950F mediante Tapatalk
ikerg said:
I had first a MTCD without can bus...so I connected the key1 and key2 wires properly to specific pins into the Mazda adapter and it worked.
Then I realized that I needed a can bus for reverse signal....so I bought a Pac rp4-mz11. Even not necessary it converts as well the swc signal to standard brand SWC signal...and it worked
On my last head unit (specific for Mazda cx5) it comes with can bus and it was a plug and play procedure....everything works as expected.
I have only one button that it is not preasigned...and I had to assign ton an action by mtcdtools.
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
As I have a CanBUS decoder with my head unit and the multimedia buttons work OK, do you think I can assign the Bluetooth buttons using MTCDTools? The SWC learning app with the Malaysk rom doesn't seem to detect any button when pressed... But the multimedia buttons are pre-assigned I guess from the CanBUS.
Thanks
ikerg said:
I had first a MTCD without can bus...so I connected the key1 and key2 wires properly to specific pins into the Mazda adapter and it worked.
Then I realized that I needed a can bus for reverse signal....so I bought a Pac rp4-mz11. Even not necessary it converts as well the swc signal to standard brand SWC signal...and it worked
On my last head unit (specific for Mazda cx5) it comes with can bus and it was a plug and play procedure....everything works as expected.
I have only one button that it is not preasigned...and I had to assign ton an action by mtcdtools.
Enviado desde mi SM-G950F mediante Tapatalk
Click to expand...
Click to collapse
I tried MTCDTools, it doesn't seem to recognize any buttons press, so I guess the only way is to remove the CanBUS decoder and wire everything up, I guess I can still use wires for REVERSE and ILLUMINATION from the head unit to the Mazda radio harness?
Sent from my SM-N910F using Tapatalk
Sassokee said:
I tried MTCDTools, it doesn't seem to recognize any buttons press, so I guess the only way is to remove the CanBUS decoder and wire everything up, I guess I can still use wires for REVERSE and ILLUMINATION from the head unit to the Mazda radio harness?
Sent from my SM-N910F using Tapatalk
Click to expand...
Click to collapse
He reverse signal, at least on my cx5, is coded (no resistive) so I needed can bus for getting signal
Enviado desde mi SM-G950F mediante Tapatalk
I'm about to order this unit:
for a Novembre 2012 VW Tiguan.
Anything I should inquire about before buying?
It does not have a front microsd card slot. Seller said I will have to use a usb adaptor.
It says Kunfine in the title but KLYDE brand in the description !!!
I guess it is made by Kunfine and based on klyde.
I went to kunfine website but there is no such product. I asked kunfine about this unit and I'm waiting for their reply.
I know there are other brands there with the same design but I haven't found one with the same big screen and no buttons.
If you know of any reliable seller please advice.
Details about the device:
Brand Name:KLYDE
Special Feature:Support Steering Wheel Control,Wifi Function,Support 3G NetworkDigital Media Format:Mp3,JPEG,DVD-RAM,Mp4,DVD-R/RW,CD,Video CD,WMAFor Vehicle Brands/Model:VolkswagenDinouble DinOperating System:AndroidSpecial Features:Bluetooth,Touch Screen,Mobile Phone,CD Player,Radio Tuner,Built-in GPS
Material Typelastic
Tiguan-Year:2014,2015,2013
RAM:2GModel
Name:KF-V2905Q
Voltage:12VItem
Size:10.1 inch
Volkswagen Model:Tiguan
ROM:32G
Interface:USBMax
External Memory:32G
Resolution:1024*600OSD
Language:English
Out Power:4*50W
Display Size:10.1"
Item Weight:5kg
Special Featureslug and play
Placement:Car Console
Car Maker:VW
Thanks.
I also contacted klyde company to see if they make any px5 device like this one. I couldn't find one on their website. they are all px3
9inch here from Dasaita (HA)
Dasaita 9 "Android 6.0 Del Coche Dvd GPS para Volkswagen VW Tiguan 2010-2015 con Octa Core 2 GB de Ram Radio Auto Multimedia GPS NAVI
http://s.aliexpress.com/zAfqAVJv
(from AliExpress Android)
Enviado desde mi SM-G950F mediante Tapatalk
With the 10inch version you are going to loose the passengrr airbag status and something that is at the left of the emergency lights (I don't know what it is)
Normally these units came with can bus that brings to the screen some functionalities of the car.
You have to ensurewith your seller if the can bus is included and if the passenger airbag notification (and whichever functionality has he item on the left of the emergency light button) is included into the can bus
I'm trying to see if this is even possible but can't find much information. The information I've found doesn't make anything clear to me.
I installed a Joying 8.1 Intel SC9853i head unit into a 2009 Lincoln MKX (basically a Ford Edge) with a PAC RadioPRO4 Radio Replacement Interface RP4-FD11. Is the PAC unit a CAN Bus decoder? How can I get the vehicles information displayed onto the Joying screen? I see the CAN Bus settings in the menu but don't know what options to select and where to go from here. Any help is appreciated!
ProBird79 said:
I'm trying to see if this is even possible but can't find much information. The information I've found doesn't make anything clear to me.
I installed a Joying 8.1 Intel SC9853i head unit into a 2009 Lincoln MKX (basically a Ford Edge) with a PAC RadioPRO4 Radio Replacement Interface RP4-FD11. Is the PAC unit a CAN Bus decoder? How can I get the vehicles information displayed onto the Joying screen? I see the CAN Bus settings in the menu but don't know what options to select and where to go from here. Any help is appreciated!
Click to expand...
Click to collapse
Afaik the pac is just a steering wheel buttons retainer...it just keeps your stock steering wheel buttons (usually coded) and converts the coded signal into resistive signal.
It usually decodes reverse signal (for reverse camera), illumination signal (for atomatic day/light brigth) and specifoc stock amplifier as well.
Consult your manual of pac for more information.
For sure it is not compatible with the canbus settings of your joying radio. You need specific joying canbus for your car model
Enviado desde mi SM-G975F mediante Tapatalk
ikerg said:
You need specific joying canbus for your car model
Click to expand...
Click to collapse
I don't see one listed for my vehicle. Does that mean it's not possible to do?
ProBird79 said:
I don't see one listed for my vehicle. Does that mean it's not possible to do?
Click to expand...
Click to collapse
Ask joying.
Enviado desde mi SM-G975F mediante Tapatalk
Hello, I need the the version of MCU 5.3.17-13-14-253101-151110, I update my radio and he stop work's ( alfter update version of MCU is 5.3.18-98-10-E50201-160232.
Hi. i need help on can bus for peugeot 308 year 2010. I cant find any apps that can set time on small screen of my peugeot 308. im using china android player 9inch versionand using raise canbus. i try to use apps from other canbus but not working. anybody here can help me?thanks
Have you confirmed with headunti manufacturer/seller that that feature is available for your model?
Canbus features for each brand/model are preprogrammed.
Canbus box collects data and send it to headunit in specific format.
Mcu gathers data and according to preprogrammed functions allow feature to be displayed or be functional
Not all oem functions are available on these canbus. You have to check
Enviado desde mi SM-G975F mediante Tapatalk
so i must try another canbus.thank you
Not necessarily.
You must confirm first if that feature is included in your canbus or in other
Enviado desde mi SM-G975F mediante Tapatalk