I have a Ford galaxy with year modell 2014
My Unit is oval modell orignal (ford600 Cd)
Today i have factory fited parking sensor front and rear
This funktion activates when reverse or when pressiing a Button on panel, beep sounds when reverse and stereo sound automaticlly goes down (slow) to able to hear the sound
My question is wich Unit on market support this funktion?
I Had try a Unit called d7009 but lost My beep funktion
Please need some help
My car does not have converse+
Any android unit on market wich support this funktion ???
No unit does support you need a can-bus decoder and a unit that supports a can-bus decoder for a Ford Galaxy
Try to contact dasaita on Aliexpress if exist a compatible can-bus for the unit they sell (octa core 2gb ram px5 platform)
Enviado desde mi D6603 mediante Tapatalk
No luck with dasaita
Their Unit does not support front / rear sensor
Any other rekommendation ?
Ownice says that their Unit Will work and support My reverse sensor , Any Idea?
Does Ownice Unit support rear / front parking sensor for Ford galaxy 2014 ?
Or Any other Unit ?
Webbcam said:
Does Ownice Unit support rear / front parking sensor for Ford galaxy 2014 ?
Click to expand...
Click to collapse
NO unit can decode the CAN bus data on Ford cars.... can't read the outside temp, if the doors are open, parking sensors... and so on...
Most of the Android ChinaRadios come with some sort of CANbus decoder (or so they are labeled) to provide steering wheel controls, backup support, etc... Every single vendor will only sell you a CANbus decoder that they 'manufacture' for their units - claiming that any other combination of decoder/radio will not work.
Aside from this being mostly BS, these vendors are absolutely adamant of not wanting to sell individual of these decoders - which for Chinese vendors is curious, to say the least, to turn down any opportunity to make a buck.
Either way, despite all of them claiming to manufacture their own, we know that is BS -- these vendors buy products from actual manufacturers, repackage them, and sell them.
Try as I might (Alibaba, aliexpress, globalSources) I have not been able to find a manufacturer that produces just these boxes.
Does anyone around here have any leads?
MacConsult said:
Most of the Android ChinaRadios come with some sort of CANbus decoder (or so they are labeled) to provide steering wheel controls, backup support, etc... Every single vendor will only sell you a CANbus decoder that they 'manufacture' for their units - claiming that any other combination of decoder/radio will not work.
Aside from this being mostly BS, these vendors are absolutely adamant of not wanting to sell individual of these decoders - which for Chinese vendors is curious, to say the least, to turn down any opportunity to make a buck.
Either way, despite all of them claiming to manufacture their own, we know that is BS -- these vendors buy products from actual manufacturers, repackage them, and sell them.
Try as I might (Alibaba, aliexpress, globalSources) I have not been able to find a manufacturer that produces just these boxes.
Does anyone around here have any leads?
Click to expand...
Click to collapse
To add more to that.
My previous unit an Witson 3066/1Gb ram has an CAN decoder that worked fine for my Ford but the Joying ones work only 85% fine meaning the PREV and NEXT buttons were reversed and that was a pain to use since all my life when I push the NEXT button I expect to hear the next song not the previous one.
Anyway, although I was struggling to correct the Joying CAN mistake I could not because I did not find any way that I could reflash the CAN box. Joying said that the CAN might not be 100% compatible with my car although it should be.
Even if the old CAN box from my former Witson unit was looking exactly the same and the wire socket was exactly the same as the Joying one, the wiring was completely different, different wiring location on the socket, different wire colours. The internals of the CAN boxes looked almost the same but I did not had the courage to test the Witson one on the Joying afraid that I would damage the headunit or more importantly the car...
What I did in the end was to directly connect the resistive buttons of the steering wheel directly to the unit (bypassing the CAN) and program them via the unit software and let the CAN box to decode the other stuff like putting the car in reverse, turning on the lights, feeding +12V to the unit when I start the car.
What I learned is that CAN box is a black box... if it's not working it's almost impossible to find a fix of any kind... or buy a working replacement...
That appears to mirror my initial impression, albeit I feel that different vendors use different providers for these CANboxes and hence that a different CANbox should be able to do the job another can't.
Example, on my XTRONS unit, the steering wheel controls didn't work at all - albeit reverse detection and lights worked well. Unlike my prior box (from 'alec-power' where everything worked (except the radio didn't produce any sound - a slight issue. They took it back and refunded me). Now, XTRONS had me send back the CANbus box, and promised to send another as soon as they have stock again. (1-2 weeks), but they also confirmed that their e39/e46 (BMW) decoder is the same as the one for e53.
What we really need is to figure out how these CANbus boxes work, and ideally how to program them (if that is possible -- which it ought to be).
That's what I was attempting to kick-start with this thread.
Bummer, so no one has any information on these CANbus decoders?
MacConsult said:
Bummer, so no one has any information on these CANbus decoders?
Click to expand...
Click to collapse
Your best bet is to try a different car in the canbus setting in factory settings. I had that problem on my ford focus I set the canbus for it and it didn't work right with the steering wheel so went through them all to find that the ford Mondeo rise settings worked and fixed that problem for me.
Where can i buy new canbus gor ownice c500? I send mail to manufacturer but no answer
pcmender2005 said:
Your best bet is to try a different car in the canbus setting in factory settings. I had that problem on my ford focus I set the canbus for it and it didn't work right with the steering wheel so went through them all to find that the ford Mondeo rise settings worked and fixed that problem for me.
Click to expand...
Click to collapse
Turned out, in my case, that the proper setting was "NONE" in the CANbus settings, and suddenly everything worked.
Chinese engineering....
If you need a canbus box, your best bet would be to go with a more mainstream manufacturer, like axxess/metra. Their units can tie back into the car radio using the SWI1/2 wires.
Any update on this?
Just reviving an old thread looking for answers
I also think there is a problem with my bmw e39 can-bus box i am using with Xtrons PQ7939BIP. When i connect the can-bus box, the red (terminal R) and the yellow (battery + terminal 30) become "shorted" and they should not "touch" each other. This way, i have to connect the yellow and the red wires from the android unit to the violet/white wire from my car (terminal R - accesory) and leave the terminal 30 (hot all time) wire from the car disconnected so that the xtrons unit shuts down when i put the ignition switch in position 0 or when i pull out the key from the ignition switch.
Is this normal or is my can-bus box bad?
Trimis de pe al meu SM-G950F folosind Tapatalk
bogdan wst said:
I also think there is a problem with my bmw e39 can-bus box i am using with Xtrons PQ7939BIP. When i connect the can-bus box, the red (terminal R) and the yellow (battery + terminal 30) become "shorted" and they should not "touch" each other. This way, i have to connect the yellow and the red wires from the android unit to the violet/white wire from my car (terminal R - accesory) and leave the terminal 30 (hot all time) wire from the car disconnected so that the xtrons unit shuts down when i put the ignition switch in position 0 or when i pull out the key from the ignition switch.
Is this normal or is my can-bus box bad?
Trimis de pe al meu SM-G950F folosind Tapatalk
Click to expand...
Click to collapse
You can connect the red wire to any wire on your bmw that has 12 volts with the key on RUN or ACCESSORY, but the yellow wire needs to have 12 volts all the time.
MacConsult said:
Most of the Android ChinaRadios come with some sort of CANbus decoder (or so they are labeled) to provide steering wheel controls, backup support, etc... Every single vendor will only sell you a CANbus decoder that they 'manufacture' for their units - claiming that any other combination of decoder/radio will not work.
Click to expand...
Click to collapse
Every PX5 and PX head unit can work with a canbus decoder from different manufacturers. You have to go to Android Settings > Car settings > Factory settings (password: 126) > Canbus tab > Select the manufacturer of your canbus decoder and the car model.
I have a PX5 head unit with a canbus decoder from "Simple", and when it broke, I replaced it with "Raise" and it works.
I recommend to review the list of supported canbus decoders in your head unit in the Factory settings, before purchasing a new one. You may need also to buy a new wire harness if you don't have a plug for the canbus decoder.
piotrmocko said:
Every PX5 and PX head unit can work with a canbus decoder from different manufacturers. You have to go to Android Settings > Car settings > Factory settings (password: 126) > Canbus tab > Select the manufacturer of your canbus decoder and the car model.
I have a PX5 head unit with a canbus decoder from "Simple", and when it broke, I replaced it with "Raise" and it works.
I recommend to review the list of supported canbus decoders in your head unit in the Factory settings, before purchasing a new one. You may need also to buy a new wire harness if you don't have a plug for the canbus decoder.
Click to expand...
Click to collapse
Hi,
I also have PX unit (PX6) with Simple soft CANBUS and I get more options when I chose raise like air-conditioning info on my PX6 unit. I have Honda civic 2016 and the only thing that is not working is the car clock not syncing through the CANBUS from my Dasaita PX6 unit. which is a bummer.
I am very curious about the Can Box options as when looking to buy a unit for my '18 WRX with HK Audio I found the IDoing selling them with support for the HK and was surprised as Crutchfield and Meastro just added support for this setup and I was about to order their harness and box to wire in a Kenwood unit I have in my old car.
When I found the IDoing(FYT) I figured all the other better know sellers should have had same option so I emailed Joying as I couldn't find option from them and they responded that they didn't have a solution. SYGAV does claim to have one but but it's nearly double cost and all the WRX reviews said it was hit or miss if it worked.
I bought the IDoing unit and it was plug and play and works great(with one exception)
If these are all the same HU and CanBus hardware, why the variances? Just programming by the seller or are they all buying from different MFR?
Before ordering I tried to order a harness and canbus from IDoing and the unit from Joying, Joying wouldn't sell me the HU because I had mentioned I had HK Audio and IDoing Flat out refused to sell me a canbus and harness without proof I had bought a HU from them.
That said the Unit works very well and the only issue with the Canbus is that it can't control the rear speaker separate from the front(no fade).
Someone earlier mentioned buying a maestro, has anyone ever connected one of these chinese units to a maestro box?
Just so everyone knows
I managed to add canbus functionality to my xtrons unit even though they said it’s not compatible
I bought a harness for my car with the correct decoder and chopped it to fit the pin outs of my head unit.
works like a dream.
If anyone needs advice I am always available
what car and what harness? You bought a canbus and harness from another "seller" and made it fit? Or you bought something aftermarket like Maestro?
gottahavit said:
what car and what harness? You bought a canbus and harness from another "seller" and made it fit? Or you bought something aftermarket like Maestro?
Click to expand...
Click to collapse
Peugeot 207.
bought harness with decoder from feedo seller.
chopped off the connector and soldered it to my hu connector
are you looking to do same?
Sdpuk2020 said:
Peugeot 207.
bought harness with decoder from feedo seller.
chopped off the connector and soldered it to my hu connector
are you looking to do same?
Click to expand...
Click to collapse
This is the harness I bought
Sdpuk2020 said:
Peugeot 207.
bought harness with decoder from feedo seller.
chopped off the connector and soldered it to my hu connector
are you looking to do same?
Click to expand...
Click to collapse
What are you looking to do?
Sorry I was hoping you had found a way to make a maestro or other idatalink module work.
Hi guys,
My old Android head unit got touch screen broken so I'm looking for a new one.
My car is Toyota Land Cruiser Prado 120, 2005, with a JBL amplifier, but I already have a CANBUS decoder from my old android head unit.
Can you recommend a unit that will work with a rear view camera (RCA), car recorder (USB) and has possibly least number of issues?
And a seller (preferably tomtop, gearbest, banggood or aliexpress)?
You can look at Joying new Octa core 7'' head unit JY-UM135N2PX5C
SummerLiu said:
You can look at Joying new Octa core 7'' head unit JY-UM135N2PX5C
Click to expand...
Click to collapse
Thanks for recommendation, but this is a 2-DIN unit, and I need one specific for Toyota Prado to integrate nicely with my dashboard. I didn't find one like that from Joying.
Looking for a android head unit for a 2013 Mazda CX-5.
Would like both steering wheel and the joystick in the centerconsoll to work.
It is the one with BOSE sound system, so it need to work with this aswell.
Found a few which include a new joystick, but is the wrong one. It seems like the joystick i found have a slot for a swithc (guess it is for an eletronic park-brake)
I dont have this knop\switch, I have an manual park-brake....
Any recomendations?
Dasaita 10.2 inch unit
https://youtu.be/yi2Z8J-3eM8
Tha one on the video is px5 android6 2gb ram
Now px5 is android 9 4gb ram
There is also a px6
Enviado desde mi SM-G950F mediante Tapatalk
Hey guys,
So I was interested in getting the Teyes CC3 head unit for my 2013 Accord EX-L that comes with dual screen. Teyes doesn’t offer compatibility with the trim of my car since it only supports the single screen model. But I came across the Ossuret head unit which is compatible with my car and was wondering if I could apply their canbus decoder onto the Teyes head unit or any canbus decoder from AliExpress onto the head unit. If you guys have any solution or information that would be a great help.
Similar question. Anyone ?
Why not asking Teyes if they support that specific CAN box?
They're selling an universal unit so that should be a legitimate question.
TorstenH said:
Why not asking Teyes if they support that specific CAN box?
They're selling an universal unit so that should be a legitimate question.
Click to expand...
Click to collapse
I contacted them, but they just said custom harness. From my research though the accord uses BNR. No way for me to know till i try so hopefully when my harness comes it'll work.