Hi i have problem with my Leeco Le pro 3. Phone is working but no charging. I can smell like smoke from usb port. I found on aliexpress new charging port. Is this is easy to repair? In service they want to much money for repair. Is it possible repair this by my self?
As long as the port isn't soldered to the motherboard. IDK if it is or not. You'll have to search for teardown videos or images of the phone's disassembly. If you're lucky the setup might be the exact same as the Le 2's, which does have disassembly guides. If it doesn't, you're pretty much SOL because I can't find any teardown videos of the Pro3. You can replace the Le 2's charging port (its flex cable is under the battery)
sk8223 said:
As long as the port isn't soldered to the motherboard. IDK if it is or not. You'll have to search for teardown videos or images of the phone's disassembly. If you're lucky the setup might be the exact same as the Le 2's, which does have disassembly guides. If it doesn't, you're pretty much SOL because I can't find any teardown videos of the Pro3. You can replace the Le 2's charging port (its flex cable is under the battery)
Click to expand...
Click to collapse
Litterally the first link on google....
http://www.myfixguide.com/manual/leeco-le-pro-3-teardown/
@op yeah, the usb port sits on a separate board, look @ the site I linked..
I found this board but without vibration motor and speakers. So i must apply this from old board to new?
Quadzik21 said:
I found this board but without vibration motor and speakers. So i must apply this from old board to new?
Click to expand...
Click to collapse
Yup. Doesnt seem to be difficult, it's all on connectors (look @ the pics on aliexpress), only the small circular object (vibration motor? microphone? dunno) needs to have its + and - wires soldered on.
trizex said:
Litterally the first link on google....
http://www.myfixguide.com/manual/leeco-le-pro-3-teardown/
@op yeah, the usb port sits on a separate board, look @ the site I linked..
Click to expand...
Click to collapse
Oh lol. I was looking on Youtube. And that's great, good news for anyone who needs to open the phone up!
Quadzik21 said:
I found this board but without vibration motor and speakers. So i must apply this from old board to new?
Click to expand...
Click to collapse
Which one did you buy? Link?
I can't send link. Enter le pro 3 charging board on aliexpress and this is first one with 19 orders.
Hi Everyone!
Unfortunatelly My x720's USB connector burned few weeks ago during fast charging.. It is burned, the connector is fuzed and I feel the burning smell, but it was already too late.
So the usb port got unusable, I can not use it for charging, and I am not able to connect to my phone!
I wanted to buy a new USB flex board but unfortunatelly there is no full (factory) version on the market!
I searched it many hours on the net, but there are only cheap ( remanufactured) version of it.
They have many missed parts, just have their solder points on the board, so these do not support OTG and fast charging.. I can not understand why can't make full version boards for a higher price, these versions are unhelpful items.
https://ibb.co/kYypx8
https://ibb.co/fnH4VT
https://ibb.co/fZM9x8
So I bought only USB C connectors and I will try to replace it on the original board!
I thing it will be a hard work, but I hope it will succeed.
If not, I have to buy a used phone for parts, and I will take out the USB board from it.
As I see, the X722 have the same flex board!
So I would buy a hard bricked x722 for parts for a good price!
Just very important to me that its USB connector be in a good condition!! Do someone would sell it??
I know unfortunatelly there are lots of users who have hard bricked dead x722...
So if you read this lines and you can help me, please write me, and I hope we can make a deal!
Thanks
Daniel
Hi, exactly the same happened to me, the USB port of my leeco was burned. I do not know if it would be because of the usb cable c stock that brings (bad quality). But you'd be surprised if I told you that, shortly after the usb port c burned down, I looked more closely at port C and there was melted black plastic on the pins of the connector. Then clean the connector with a fine needle (carefully), getting rid of the plastic, the remains are cleaned with cotton and a little isopropyl alcohol (which leaves no traces when it evaporates). After doing all the above, I was surprised when I plugged in the headphones and it worked, in the end I tried another cable type C first with the PC and it worked (it was recognized by the normal PC), then I took a chance with another charger I had at home (not the Leeco charger) and it worked ... I had no problem loading it. You could try it ..!
Danika256 said:
Hi Everyone!
Unfortunatelly My x720's USB connector burned few weeks ago during fast charging.. It is burned, the connector is fuzed and I feel the burning smell, but it was already too late.
So the usb port got unusable, I can not use it for charging, and I am not able to connect to my phone!
I wanted to buy a new USB flex board but unfortunatelly there is no full (factory) version on the market!
I searched it many hours on the net, but there are only cheap ( remanufactured) version of it.
They have many missed parts, just have their solder points on the board, so these do not support OTG and fast charging.. I can not understand why can't make full version boards for a higher price, these versions are unhelpful items.
https://ibb.co/kYypx8
https://ibb.co/fnH4VT
https://ibb.co/fZM9x8
So I bought only USB C connectors and I will try to replace it on the original board!
I thing it will be a hard work, but I hope it will succeed.
If not, I have to buy a used phone for parts, and I will take out the USB board from it.
As I see, the X722 have the same flex board!
So I would buy a hard bricked x722 for parts for a good price!
Just very important to me that its USB connector be in a good condition!! Do someone would sell it??
I know unfortunatelly there are lots of users who have hard bricked dead x722...
So if you read this lines and you can help me, please write me, and I hope we can make a deal!
Thanks
Daniel
Click to expand...
Click to collapse
Card
https://www.ebay.com/itm/for-LeEco-...662149?hash=item2cd676aa85:g:g6cAAOSwTLpbLLb0
Flex cables
https://www.aliexpress.com/item/Bac...0a63-4886-a325-a2e4c99de900&priceBeautifyAB=0
Hi
@Kener97
Thanks for the response, I would try it, maybe it would work for me as well, but it is pretty melted..Unfortunatelly I have already disassembled the phone. I did not have another cables, but now I have two good quality fast charger USB C cables, but now I already can't try it! I happy that you can use your phone after the accident. Yeah, you're right the original cable has very bad quality. I had already thrown it into the trash.
So I decided If I have already disassembled the phone than I will try to replace the USB C port in the next week and then I'll se what can I do.
@tsongming
Thanks for the links, but as I wrote, these USB boards unfortunatelly are not the original items just cheap versions with many missed parts! Check the images!!
You can see teir solder points on the boards. So these don't support OTG and fast charging... Only the normal charging without communications. These are not an option to solve the problem. Maybe if I would replace the missed parts from the original board if the connector replace won't be suceed.. )
I will write the result!
Anyone, any other solutions? Or anyone known where could I buy the factory version boards?
Regards,
Daniel
Does somebody know If this problem occour on x722 too?
Perius said:
Does somebody know If this problem occour on x722 too?
Click to expand...
Click to collapse
I don't know, but the x722 and x720 is the same at the USB port and the poor quality USB cable as well!
I just recommend You don't use the fast charging especially don't with the original cable!
Danika256 said:
I don't know, but the x722 and x720 is the same at the USB port and the poor quality USB cable as well!
I just recommend You don't use the fast charging especially don't with the original cable!
Click to expand...
Click to collapse
Why everyone keep saying this for me it's perfect. I'm always using qc, and i dont have any problem, no shut downs, no huge heating(I'm even charging while playing)
Danika256 said:
I don't know, but the x722 and x720 is the same at the USB port and the poor quality USB cable as well!
I just recommend You don't use the fast charging especially don't with the original cable!
Click to expand...
Click to collapse
Thank you for the answer. Do you think the problem is the whole charge or Just the cable? Is It ok to use fast charge with third party cables?
Perius said:
Thank you for the answer. Do you think the problem is the whole charge or Just the cable? Is It ok to use fast charge with third party cables?
Click to expand...
Click to collapse
The cables are notoriously bad, one of my x727s was destroyed by a bad cable. Fortunately, Amazon exchanged it for a new phone.
We have 4 Leeco phones in our house. I have replaced all of the USB cables with highly rated cables, that have a replacement guarantee.
Sent from my Pixel XL using XDA Labs
tsongming said:
The cables are notoriously bad, one of my x727s was destroyed by a bad cable. Fortunately, Amazon exchanged it for a new phone.
We have 4 Leeco phones in our house. I have replaced all of the USB cables with highly rated cables, that have a replacement guarantee.
Sent from my Pixel XL using XDA Labs
Click to expand...
Click to collapse
So you use the stock charge with another cable?
Perius said:
So you use the stock charge with another cable?
Click to expand...
Click to collapse
Although some people recommend also switching the charger block. I don't agree with them, and think that is overkill. Its the stock cables that are garbage, not the the charging blocks.
We have four of these charging blocks and no issues with any of them. In fact, in late December, when the X727 that I returned had its usb card burned. My dad ( a retired electrical engineer) took apart one of the blocks and found it well constructed.
Next, Leeco charging blocks are approved by and meet Qualcomm standards.
https://www.qualcomm.com/media/documents/files/quick-charge-device-list.pdf
If there was an issue with the charging blocks on a large scale, would they still provide this publicly available list? No, I don't think so.
Should you decide to go ahead and replace the adapter anyway, The pdf list has a section with Qualcomm approved chargers under the "Premium Power Banks" section
---------- Post added at 04:14 PM ---------- Previous post was at 04:05 PM ----------
Danika256 said:
Hi
@Kener97
Thanks for the response, I would try it, maybe it would work for me as well, but it is pretty melted..Unfortunatelly I have already disassembled the phone. I did not have another cables, but now I have two good quality fast charger USB C cables, but now I already can't try it! I happy that you can use your phone after the accident. Yeah, you're right the original cable has very bad quality. I had already thrown it into the trash.
So I decided If I have already disassembled the phone than I will try to replace the USB C port in the next week and then I'll se what can I do.
@tsongming
Thanks for the links, but as I wrote, these USB boards unfortunatelly are not the original items just cheap versions with many missed parts! Check the images!!
You can see teir solder points on the boards. So these don't support OTG and fast charging... Only the normal charging without communications. These are not an option to solve the problem. Maybe if I would replace the missed parts from the original board if the connector replace won't be suceed.. )
I will write the result!
Anyone, any other solutions? Or anyone known where could I buy the factory version boards?
Regards,
Daniel
Click to expand...
Click to collapse
There are plenty of people with bricked X722's, go to the X722 unbrick thread and message those people, maybe some on will sell you their expensive paperweight for cheap.
If you live near a large city there is bound to be a shop that does repair at the component level. perhaps they could fix your damaged board or as you mentioned transfer the chips from the old board to the 3rd party board that has missing chips. The issue is that some of those chips are likely fried.
tsongming said:
The cables are notoriously bad, one of my x727s was destroyed by a bad cable. Fortunately, Amazon exchanged it for a new phone.
We have 4 Leeco phones in our house. I have replaced all of the USB cables with highly rated cables, that have a replacement guarantee.
Sent from my Pixel XL using XDA Labs
Click to expand...
Click to collapse
What sort of cable do you recommend?
Thanks.
Lethalben said:
What sort of cable do you recommend?
Thanks.
Click to expand...
Click to collapse
Here is a handy adapter, which limits voltage and block data:
https://www.amazon.com/PortaPow-Data-Blocker-Adaptor-SmartCharge/dp/B00QRRZ2QM
Anker [2-Pack, 6ft] PowerLine+ USB-C to USB-A
https://www.amazon.com/Anker-PowerL...F8&qid=1530649076&sr=8-3&keywords=usb+c+anker
ANKER Safe Quick Charge 3.0
https://www.amazon.com/Charge-Anker...649274&sr=1-3&keywords=anker+3.0+quick+charge
Danika256 said:
Hi
@Kener97
Thanks for the response, I would try it, maybe it would work for me as well, but it is pretty melted..Unfortunatelly I have already disassembled the phone. I did not have another cables, but now I have two good quality fast charger USB C cables, but now I already can't try it! I happy that you can use your phone after the accident. Yeah, you're right the original cable has very bad quality. I had already thrown it into the trash.
So I decided If I have already disassembled the phone than I will try to replace the USB C port in the next week and then I'll se what can I do.
@tsongming
Thanks for the links, but as I wrote, these USB boards unfortunatelly are not the original items just cheap versions with many missed parts! Check the images!!
You can see teir solder points on the boards. So these don't support OTG and fast charging... Only the normal charging without communications. These are not an option to solve the problem. Maybe if I would replace the missed parts from the original board if the connector replace won't be suceed.. )
I will write the result!
Anyone, any other solutions? Or anyone known where could I buy the factory version boards?
Regards,
Daniel
Click to expand...
Click to collapse
Hello, could you tell me if you managed to get the board working by changing the connector ? My connector also burned. also I was wondering if my earphones would work on the cheap boards that are sold on aliexpress ?
Melwin1000 said:
Hello, could you tell me if you managed to get the board working by changing the connector ? My connector also burned. also I was wondering if my earphones would work on the cheap boards that are sold on aliexpress ?
Click to expand...
Click to collapse
Hi!
No, only will work the slow charging and USB communication with the cheap, useless USB flex board!
But there is a solution, to get a new original x720 USB board with all functionality!
After 3 months and Iots of time what I spend on the net, I found TAOBAO chinese site, and to my surprise some seller selling the original version board there with a good price!
Use the Crome browser with built in translater!
Only one problem, TAOBAO is a chinese "domestic site", and nobody ship to abroad.
But I did not give up! And I found the final solution, that's Yoybuy! (Yoybuy.com)
Yoybuy is a forwrding site!
You can buy everything form chinese sites helped by Yoybuy, for a cheap price!! From Taobao or many chinese site and you can use it English.
Just register at Yoybuy and copy the Taobao item's link to Yoybuy and they will buy the items, what you want! You can pay by paypal as well!
I hope I could help you! My phone is back to life, and it is like a new one!
Regards
Daniel
PS. Definitely buy a new good quality USB C cable for charging ( I recommend You the Oneplus DASH cable) to stay the USB connector intact!
Kener97 said:
Hi, exactly the same happened to me, the USB port of my leeco was burned. I do not know if it would be because of the usb cable c stock that brings (bad quality). But you'd be surprised if I told you that, shortly after the usb port c burned down, I looked more closely at port C and there was melted black plastic on the pins of the connector. Then clean the connector with a fine needle (carefully), getting rid of the plastic, the remains are cleaned with cotton and a little isopropyl alcohol (which leaves no traces when it evaporates). After doing all the above, I was surprised when I plugged in the headphones and it worked, in the end I tried another cable type C first with the PC and it worked (it was recognized by the normal PC), then I took a chance with another charger I had at home (not the Leeco charger) and it worked ... I had no problem loading it. You could try it ..!
Click to expand...
Click to collapse
I think you make a good point about the the LeEco charger. Precisely, it is the cable that is the biggest culprit. I recently bought a x720 and had it for a week charging with an old charger and cable of my le 2. One day i couldn't find the le 2 charging cable so I decided to use the one that came with the pro 3. Just seconds after plugging the cable in I smelled burning plastic and could see smoke coming out of the usb port. I removed the cable and could immediately see that it had melted on the pins close to the edge. Funny enough, if i plug this burnt cable on my le 2 it is charging but if i plug it into the pro 3 it gets hot and starts to produce smoke. I have tried with other type c cables and the port is burning them also. Now it looks like I need to replace my usb port. I will have a closer look at it to see if it can be cleaned but I'm not hopeful. I hope i can get original parts for it because i was sold an old phone by an AliExpress seller who claims it's new. I have started a thread on it. Hopefully I can spin it out to ask anyone with information about where to get genuine parts to help restore these old phones.
https://forum.xda-developers.com/le-pro3/help/swindled-aliexpress-seller-sold-t3948260
Hi,
My charging connector is dead and I would like to change it.
Does anyone know where I can find the official charging connector? And if not possible, at least a reliable one. I'm located in France.
Thanks in advance
https://www.oneplus.com/fr/oneplus-fast-charge-type-c-cable
https://www.oneplus.com/fr/store/power-cables
https://www.gearbest.com/oneplus-cable-_gear/ (Can't vouch for any seller on here though)
anyone knows where i can buy alert slider component ?
umair shaikh said:
anyone knows where i can buy alert slider component ?
Click to expand...
Click to collapse
You know JerryRigEverything? He has links for spare parts under his videos. Just search it on YouTube.
djsubterrain said:
https://www.oneplus.com/fr/oneplus-fast-charge-type-c-cable
https://www.oneplus.com/fr/store/power-cables
https://www.gearbest.com/oneplus-cable-_gear/ (Can't vouch for any seller on here though)
Click to expand...
Click to collapse
he's talking about the USB-C port, not cables..
DerNoobikeks said:
he's talking about the USB-C port, not cables..
Click to expand...
Click to collapse
Yeah I realised that, that needs a whole daughterboard though, you can't just buy the power connector.
djsubterrain said:
https://www.oneplus.com/fr/oneplus-fast-charge-type-c-cable
https://www.oneplus.com/fr/store/power-cables
https://www.gearbest.com/oneplus-cable-_gear/ (Can't vouch for any seller on here though)
Click to expand...
Click to collapse
djsubterrain said:
Yeah I realised that, that needs a whole daughterboard though, you can't just buy the power connector.
Click to expand...
Click to collapse
the OP5 has the charging port attached on a ribbon cable.
DerNoobikeks said:
the OP5 has the charging port attached on a ribbon cable.
Click to expand...
Click to collapse
So it does, like this one....
https://www.replacebase.co.uk/for-oneplus-5-replacement-dock-charge-port-with-headphone-jack-oem/
Hey guys just yesterday I burnt my phones charging port while charging my phone.
Copper pins inside of cable we completely burnt and maybe the phones port pins were burnt too.
I have submitted my device and charger to Samsung Service Center and now I am waiting for their response.
I checked my Electricity socket and it was completely fine.
Prior to this incident I used to hear ticking sound whenever I used to move my phone while charging which I ignored thinking that it was some sort of system sound. But later I realized that it was coming from charging area as I used to hear it even if phone was shut down.
Is anyone facing such issue with charger? If so please replace the charger as it will probably turn into a nightmare.
Btw, I am using Exynos version. :good:
Oh, they are going to replace the motherboard if charging port is faulty, better ask for a new phone... Charging port isnt replaceable anymore, samsung became just like apple.
Sent from my SM-G975F using Tapatalk
vojopd said:
Oh, they are going to replace the motherboard if charging port is faulty, better ask for a new phone... Charging port isnt replaceable anymore, samsung became just like apple.
Sent from my SM-G975F using Tapatalk
Click to expand...
Click to collapse
Yes, they are gonna change the motherboard. Why do you suggest asking for a new phone instead? Can I do that?:silly:
if you are using authentic charger and cable, this shld be alright.
Sent from my SM-G975F using Tapatalk
jemfalor said:
if you are using authentic charger and cable, this shld be alright.
Sent from my SM-G975F using Tapatalk
Click to expand...
Click to collapse
I use authentic charger since OnePlus 3 days...
Well, I would ask for a new one.
Sent from my SM-G975F using Tapatalk
ask for refund
I had the same issue and called customer support and got replaced.
It took a while to process but I got the new phone.
Check on Samsung customer service page
Definitely try to have it replaced in stead of a motherboard change.