Database Users

Phone struggling to charge.

Hello everybody. Recently, I had my phone go under a repair which involved opening up the entire phone just to replaces the mini usb port, which was detached from the phone and was trapped inside, losing its ability to charge.
Now, another problem has arisen. The phone has problems charging with wires compatible with its port. When I connect to it to charge via usb, it was plug-n-go, all good. For some unknown reason, it suddenly came under the issue that I need to shift the usb up,down, left, right, and slightly bend it the inside. Now, the original charger doesn't work because it broke, leaving the usb charger as the only option. I can't understand why my HTC Wizard is having this problem,and it's very frustrating. I paid sixty dollars for the repair on the USB, and it seems it hasn't done anything except reattatch it. Any suggestions?

Hey Infinity M,
By your description, it looks like the soldering is a bit loose, thus you have to shift the USB.
Have you tried with different chargers and cables?
If you wish (at your own risk), get a thin screwdriver or something like one, then apply a small force to all directions at the border of the Wizard's USB. Watch if it moves with any pressure, as that will indicate a loose solder.
Good luck, man!

nandobang said:
Hey Infinity M,
By your description, it looks like the soldering is a bit loose, thus you have to shift the USB.
Have you tried with different chargers and cables?
If you wish (at your own risk), get a thin screwdriver or something like one, then apply a small force to all directions at the border of the Wizard's USB. Watch if it moves with any pressure, as that will indicate a loose solder.
Good luck, man!
Click to expand...
Click to collapse
Thank you for your sufficient reply. I have not tried a different cable, and I have checked the Wizard's USB. I'll have to try another cable to check if it works. Do you know where I can buy a charger for a cheap price. Thanks!
Edit: Heh, I realized you're the same person making that HTC Obsidian Case, I'd love to pay you for it lol.

Infinity M said:
Thank you for your sufficient reply.
Click to expand...
Click to collapse
You're welcome
Infinity M said:
Do you know where I can buy a charger for a cheap price.
Click to expand...
Click to collapse
That's a hard one. I would send you straight away to eBay, lol, but I guess you can take a look at some local stores near you. It doesn't need necessarily to be a Wizard's charger. In fact, any charger for a HTC device that uses the same battery will do (the Tytn's I guess). Or you can check the charger label and see if it meets these requirements:
INPUT: 100-240V~0.2A
OUTPUT: 5V, 1A (this one being the most important of all)
Infinity M said:
Heh, I realized you're the same person making that HTC Obsidian Case, I'd love to pay you for it lol.
Click to expand...
Click to collapse
Dude, I'm almost conving myself to make more than one, lol!
Again, good luck man!

Fixing Galaxy Note problems

Hey guys, I created this thread to chronicle my attempt in fixing my Galaxy Note's broken USB dock connector.
The problem: The phone charges only when off. MTP/USB mass storage won't work. On some roms Car mode wackiness ensued. It seemed like it was possessed; exactly like another persons detail of the problem.
Attempt to fix it: Contacted three wholesalers in China at Alibaba.com for the dock connector for Galaxy Note. Waiting on response right now.
So far I have eleminated everything in my troubleshooting. I've tried multiple custom roms and went and tried two different stock roms with no luck. I also have tried plugging in different kinds of usb cables. I also tried plugging them in different computers.
Anyone can post they're problem-->solution here for future reference.
I found this on google and I thought it was very helpful. HERE IS THE SERVICE MANUAL FOR GALAXY NOTE:
http://letitbit.net/download/55297....68026c2/Samsung_N7000_Service_Manual.rar.html
http://www.samsungparts.ru/2012/01/%D1%80%D0%B0%D0%B7%D0%B1%D0%BE%D1%80%D0%BA%D0%B0-samsung-gt-n7000/#more-2963

andruyd said:
Hey guys, I'm created this thread to chronicle my attempt in fixing my Galaxy Note's broken USB dock connector.
The problem: The phone charges only when off. MTP/USB mass storage won't work. On some roms Car mode wackiness ensued. It seemed like it was possessed; exactly like another persons detail of the problem.
Attempt to fix it: Contacted three wholesalers in China at Alibaba.com for the dock connector for Galaxy Note. Waiting on response right now.
So far I have eleminated everything in my troubleshooting. I've tried multiple custom roms and went and tried two different stock roms with no luck. I also have tried plugging in different kinds of usb cables. I also tried plugging them in different computers.
Anyone can post they're problem-->solution here for future reference.
Click to expand...
Click to collapse
I am afraid there is no solution for this type of behavior at this point. I am too had the same experience.
I am awaiting for another responds email from Germany(where my Note came from) to send mine in for a repair. Until then, I can still use my Note with external battery/charger that I got from Amazon.
good luck-

Are guys plugging the cord in upside down or something? Ive had galaxy s, sgs2 and now note since release day and havent experienced this issue.
GALAXY NOTE

Did you guys try use difference charger? I face the same problem once where the charging mode keep changing to dock mode on and off while charging. After i change it use others charger (spare), now everything is ok.
My theory is that the charger started to malfunction n produce too low or too high voltage which trigger the dock mode..my 2 cents.. ;P correct me if im wrong..
Sent from my GT-N7000 using XDA App

naimmkassim said:
Did you guys try use difference charger? I face the same problem once where the charging mode keep changing to dock mode on and off while charging. After i change it use others charger (spare), now everything is ok.
My theory is that the charger started to malfunction n produce too low or too high voltage which trigger the dock mode..my 2 cents.. ;P correct me if im wrong..
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
I can assure you it's not the charger or the data cable, as I have plenty laying around. My money is on the logic board.

naimmkassim said:
Did you guys try use difference charger? I face the same problem once where the charging mode keep changing to dock mode on and off while charging. After i change it use others charger (spare), now everything is ok.
My theory is that the charger started to malfunction n produce too low or too high voltage which trigger the dock mode..my 2 cents.. ;P correct me if im wrong..
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
After having 2 SGNote units being bricked and (luckily) replaced with a new unit everytime, I found that the root cause for the SGNote being bricked is a weak USB interface and protection circuit. At first I thought I just messed up the rooting process that's why I bricked the device. When my 2nd replacement unit also got bricked, I traced back that the only common denominator was a rogue iphone charger that I used to recharge the device. Knowing that the weakness of the SGNote is the USB circuit, I'm now careful to use no other charger but the stock charger that came with the unit.

wolfmanx said:
After having 2 SGNote units being bricked and (luckily) replaced with a new unit everytime, I found that the root cause for the SGNote being bricked is a weak USB interface and protection circuit. At first I thought I just messed up the rooting process that's why I bricked the device. When my 2nd replacement unit also got bricked, I traced back that the only common denominator was a rouge iphone charger that I used to recharge the device. Knowing that the weakness of the SGNote is the USB circuit, I'm now careful to use no other charger but the stock charger that came with the unit.
Click to expand...
Click to collapse
Yeah this makes sense.
Anyway this is the part I'm trying to acquire:
http://www.alibaba.com/product-gs/521953864/Dock_Connector_Charging_Port_Flex_Cable.html
http://www.alibaba.com/product-gs/521398121/For_Sansung_GALAXY_NOTE_N7000_I9220.html
http://www.alibaba.com/product-gs/521398854/I9220_charger_flex_for_Samung.html
I strongly believe that the Galaxy S2 USB problems are of similar nature and the solution was to replace the USB dock connector. This gives me a lot of hope since it's easy enough to do. There is no soldering involved AFAIK since it just came off during the Galaxy Note teardown video on youtube @2:28 and @3:36 (ttp://www.youtube.com/watch?v=UFDr3PQMTxw). Correct me if I'm wrong.

its definitely a hardware issue and has been traced to the usb port inside the phone. I have the same issue and I am also waiting for the part to replace the damaged one inside my phone.
here is what I am doing to make my phone function-able:
When you connect the usb cord to charge the phone you have to press it down hard and then slide it out. this will temporarily fix the physical usb port pins and allow your phone to function normally. you have to do this every time when you connect and disconnect the usb cord. I will use my phone like this until the part becomes available to buy. I have a feeling, this phone is very delicately designed and can get bricked all by itself.

My note does not charge with Three of my HTC chargers neither does it charge with another car charger.but charges fine with the Samsung charger.has sometimes issues with otg with Samsung otg cable and another otg cable. Even today when I used a Samsung otg cable to connect my note with a Samsung galaxy s2 via a Samsung USB cable, the otg features did not work, the s2 just said mtp and note said unknown device connected! So there are issues with this USB on the note.

I saw a youtube video for Galaxy S2 where he suspected that it was a malfunctioning USB dock. He replaced it and all the symptoms were gone. I'm really going full press on this and hopefully I can help myself and others who have similar problems. I've read up on USB problems the last 2 days from Galaxy Note users and Galaxy S2. They are very similar in design other than the screen/stylus.

bannork said:
I am afraid there is no solution for this type of behavior at this point. I am too had the same experience.
I am awaiting for another responds email from Germany(where my Note came from) to send mine in for a repair. Until then, I can still use my Note with external battery/charger that I got from Amazon.
good luck-
Click to expand...
Click to collapse
Please keep us updated on your progress.
BTW to the folks having USB issues, are you having unusual battery drain? What other quirks have you encountered?
Has anyone compared the shape of the USB dock connector for Galaxy S, Galaxy S2, Galaxy Nexus and Galaxy Note? I wonder if they are all the same shape and if I should try and look at replacing that part only? If it is the same then I will get this http://cnn.cn/shop/samsung-i9000-galaxy-microusb-connector-p-10745.html since it's cheap and I've got nothing to lose if it doesn't work.

Looks like we have a new design flaw here..so, how long does it take for you guys to experience this problem from date purchase your note?
Mine already 1 month purchase and not having this problem.
Sent from my GT-N7000 using XDA App

aftabbabar said:
its definitely a hardware issue and has been traced to the usb port inside the phone. I have the same issue and I am also waiting for the part to replace the damaged one inside my phone.
here is what I am doing to make my phone function-able:
When you connect the usb cord to charge the phone you have to press it down hard and then slide it out. this will temporarily fix the physical usb port pins and allow your phone to function normally. you have to do this every time when you connect and disconnect the usb cord. I will use my phone like this until the part becomes available to buy. I have a feeling, this phone is very delicately designed and can get bricked all by itself.
Click to expand...
Click to collapse
I fully agree that it is a hardware issue. Samsung should come up with an extra dongle or maybe a protection circuit integrated with the USB cable that should be used in conjunction with the SGNote. Otherwise, this issue will just keep on repeating and they will end up with a bunch of bricked units on their hands.
If only I didn't like the display on this device, I would have opted for a change item instead of a replacement unit.
I still have the rogue iPhone charger and when I use it to charge an iPhone it keeps on repeatedly bringing up the charging battery icon on and off but it doesn't destroy or brick the phone. But when I connected it to the SGNote, it bricked it. I did it on 2 units. And it will surely brick any other SGNote unit I connect this charger to. I'm willing to demo this to Samsung to prove the point of their weak USB interface circuitry.

wolfmanx said:
...
If only I didn't like the display on this device, I would have opted for a change item instead of a replacement unit.
I still have the rouge iPhone charger and when I use it to charge an iPhone it keeps on repeatedly bringing up the charging battery icon on and off but it doesn't destroy or brick the phone. But when I connected it to the SGNote, it bricked it. I did it on 2 units. And it will surely brick any other SGNote unit I connect this charger to. I'm willing to demo this to Samsung to prove the point of their weak USB interface circuitry.
Click to expand...
Click to collapse
Like you I got the Note for the screen size because I don't like to read in small screens. I haven't had a phone in 6 years!!!! I've seen phones come and go. The screen size of the Note made it comfortable enough to read anything (PDF, comics, web pages, ebooks).
How sure are you guys that it is indeed the USB circuitry and not just the metal dock? To be honest I'm not sure right now.

andruyd said:
Like you I got the Note for the screen size because I don't like to read in small screens. I haven't had a phone in 6 years!!!! I've seen phones come and go. The screen size of the Note made it comfortable enough to read anything (PDF, comics, web pages, ebooks).
How sure are you guys that it is indeed the USB circuitry and not just the metal dock? To be honest I'm not sure right now.
Click to expand...
Click to collapse
Oh my! Looking at the charger flex assembly pictures, all I see are a bunch of passive components for protection. I see no active components on this board that would likely be used for over-voltage or over-current protection. I'm not sure if it's on the main board though. But normally protection circuitry are placed right next to the connector for them to be effective. There seems to be a lot of space on the board for even a single-chip USB protection circuit but the space hasn't been utilized for such.
I'd be willing to bet you that your problems will still be the same even after replacement of this flex assembly.

wolfmanx said:
Oh my! Looking at the charger flex assembly pictures, all I see are a bunch of passive components for protection. I see no active components on this board that would likely be used for over-voltage or over-current protection. I'm not sure if it's on the main board though. But normally protection circuitry are placed right next to the connector for them to be effective. There seems to be a lot of space on the board for even a single-chip USB protection circuit but the space hasn't been utilized for such.
I'd be willing to bet you that your problems will still be the same even after replacement of this flex assembly.
Click to expand...
Click to collapse
Well I hope you are wrong or else I'm screwed over an $800 phone. Did you see that in the Service Manual? I've linked the service manual on the first post. QME02 is the part I want to replace.

naimmkassim said:
Looks like we have a new design flaw here..so, how long does it take for you guys to experience this problem from date purchase your note?
Mine already 1 month purchase and not having this problem.
Sent from my GT-N7000 using XDA App
Click to expand...
Click to collapse
For me it was a month and a half before it started going crazy.

bannork said:
For me it was a month and a half before it started going crazy.
Click to expand...
Click to collapse
For me, about 5 minutes after I plug-in the rogue iPhone charger... I did it twice... and luckily, since I still have warranty, I got both units replaced.
I strongly suggest for everybody not to use any other USB charger apart from the stock charger that came with the SGNote. Of course, this excludes plugging it into a PC or laptop as they should be fairly safe and well-protected (at least for name-brand units).
If you're going to use the stock charger, I would recommend plugging the USB cable in the charger and plugging-in the charger in the wall socket first BEFORE plugging-in the mini-USB connector to your SGNote. This minimizes the chances of having voltage spikes being transmitted through the USB connections into the SGNote, especially during the actual plugging of the charger to the wall socket. This is to be on the safe side in the case that the stock charger design is also flawed and doesn't prevent transients from reaching the load unit itself.
Is there a website or something from which we can call Samsung's attention on this matter? If indeed transients are the cause of the USB problems then all they need to do on the SGNote is to redesign the USB board assembly and stick it into units that have not been affected yet. This entails a product recall or as I mentioned in my previous post, maybe to offer us SGNote buyers a dongle or a USB cable with the protection circuitry.
---------- Post added at 11:05 PM ---------- Previous post was at 10:53 PM ----------
andruyd said:
Well I hope you are wrong or else I'm screwed over an $800 phone. Did you see that in the Service Manual? I've linked the service manual on the first post. QME02 is the part I want to replace.
Click to expand...
Click to collapse
Yup on the service manual and on the links to alibaba that you provided on your previous posts. I looked at both sides of the sub-assembly and only found passive components.

Well I'm using a 2 amp charger from ebay for charging downstairs; a HTC 1 amp charger in the bedroom; the 1 amp Samsung charger in work, but I also plug it into the 800 mah charger that also charges an extra battery in situ. ... she's till working fine.

Right now, usb mass storage or MTP is totally non-functional for me. I'm still glad USB charging is working. I hope that parts holds up till I get a replacement for it.
Thank goodness for wireless and FTP!

defy usb port problems

I'm looking for advice. the USB port on my defy seems loose and only charges if plugged in a certain way. ive physically opened my phone and inspected everything but i cant visually notice anything, and the brace holding the port down is solid. has anyone had and fixed a problem like this? if so could you give me some tips on what to do or where to further look to repair the port. thank you in advance

companions
i appreciate the tips
happy new year
grateful

undyingvisage58 said:
I'm looking for advice. the USB port on my defy seems loose and only charges if plugged in a certain way. ive physically opened my phone and inspected everything but i cant visually notice anything, and the brace holding the port down is solid. has anyone had and fixed a problem like this? if so could you give me some tips on what to do or where to further look to repair the port. thank you in advance
Click to expand...
Click to collapse
i have the same problem and has been living with it for the last 1 yr or so! don't know if it was the usb port or the cable's fault but don't have another cable to try
one word of advise though. don't try flashing any sbf or you might end in trouble with an incomplete flash......

jh20 said:
i have the same problem and has been living with it for the last 1 yr or so! don't know if it was the usb port or the cable's fault but don't have another cable to try
one word of advise though. don't try flashing any sbf or you might end in trouble with an incomplete flash......
Click to expand...
Click to collapse
i ordered 5 of these in hopes ill get one of them soldered on before i break them all
http://www.digikey.com/product-detail/en/10118194-0001LF/609-4618-1-ND/2785382
going to be a pain trying to solder those smaller than needlepoint micro b usb terminals too the PCB.......

undyingvisage58 said:
i ordered 5 of these in hopes ill get one of them soldered on before i break them all
http://www.digikey.com/product-detail/en/10118194-0001LF/609-4618-1-ND/2785382
going to be a pain trying to solder those smaller than needlepoint micro b usb terminals too the PCB.......
Click to expand...
Click to collapse
thanks for the link. keeping it just incase i decided to do it too. i've already bought a couple of cheap/fake batteries and a desktop charger.
46c each!!!??? that's cheap enough, except the postage/freight is going to be much more
good luck and let us know the outcome.

Just in case either of you were wondering, I have not received the USB ports just yet. I will be posting a successful repair one way or another!

crashed and burned. destroyed the PCB where the USB ports are soldered... theyre just too small to be re-soldered by human hands. only way to charge my defy at this point is by macgyver some cut USB cables onto the battery terminals..

i'm sorry to hear that! you could alway buy a second battery and a desktop charger to get around your problem like what i did. they both can be bought from ebay for a few dollars each, like:
http://www.ebay.com/itm/Motorola-BF...354&pid=100011&prg=1005&rk=1&sd=150635678466&
and
http://www.ebay.com.au/itm/BF5X-Bat...MB525-Defy-MB520-/260779252758#ht_3588wt_1271

#[WARNING!!!]Do not charge the s6/edge with random micro usb cables

I bought my S6 about 1 month ago and since then I have charged it with different micro usb cables.Afew days ago the phone was showing random "top up's" on screen like "power sharing connected",Samsung VR" and yesterday I couldn't charge my phone .I have been to Samsung Care shop to see what's going on.I left it for 1 day to fix it.Thanks God I didn't root it and didn't break the knox to 0x1 and them done the service for free under warranty for 2 years by Samsung.The Engineer told me to not use foreign micro usb cables to S6 because it's different micro usb and it will break.I hope someone will listen to me and to not do whst I done.The normal price to replace usb port to S6 is £253 so be careful guys.

mariolcela said:
I bought my S6 about 1 month ago and since then I have charged it with different micro usb cables.Afew days ago the phone was showing random "top up's" on screen like "power sharing connected",Samsung VR" and yesterday I couldn't charge my phone .I have been to Samsung Care shop to see what's going on.I left it for 1 day to fix it.Thanks God I didn't root it and didn't break the knox to 0x1 and them done the service for free under warranty for 2 years by Samsung.The Engineer told me to not use foreign micro usb cables to S6 because it's different micro usb and it will break.I hope someone will listen to me and to not do whst I done.The normal price to replace usb port to S6 is £253 so be careful guys.
Click to expand...
Click to collapse
and what is foreing usd? Put a photo please

Foreign usb I meant any micro usb cable like s3 S4 S5 htc sony phones that have micro usb port.use just the genuine S6 cable

mariolcela said:
Foreign usb I meant any micro usb cable like s3 S4 S5 htc sony phones that have micro usb port.use just the genuine S6 cable
Click to expand...
Click to collapse
ok! and otg cable?

Any cable that is not Samsung S6/Egde original.Its need to be compatible with S6

USB is a standard and the connectors are the same but I agree that some cables might have different connector covers so it might push agains the case and force the usb connector.
On a side note you should black out your information. I can see your name, address, all your phone numbers, your phone serial/imei too...

mariolcela said:
Any cable that is not Samsung S6/Egde original.Its need to be compatible with S6
Click to expand...
Click to collapse
Sorry that's crap.
A micro USB connector is a standard part, unless you are buying horribly cheap junk maybe, they will all fit fine.
I have used several cables and not hurt the phone at all.

I buy a kignstons usb duo 3.0 64gb for 22 dólars.... that's means I can't use in my S6?

using my OTG usb stick with the S6.... Works. It's a bull**** comment from the repair service...
Lets just hope this won't be an S3 disaster where the USB port was a weak point. My GFs S3 had the S3 USB port problem, where it would start charging very slow due to bad USB port and a week ago, stopped charging completly, unless kept in a specific angle. On my S3, all cables worked that I had, for hers, only 1 cable made a "good" connection.

the repair service has got it half right
regarding physical damage to the port:
what you want to make sure is that other USB cables don't cause stress to the USB port... as you may have noticed, different microUSB cables have different size plugs (the same microUSB metal connector, but the plastics surrounding it are different sized)... we must make sure our cases don't interfere with the cable plug (many case manufacturers only design their case with the original samsung cable in mind, which might not be big enough for plugs like the monoprice microUSB ferrite cable, which has a large rectangular plug)
all the above is moot if you don't use a case
edit: and update with a video to explain what i was mumbling about
regarding electrical damage to the port:
you'd be safe to stick with OEM quality USB AC adapters or other big-name (Anker makes a lot of them) USB AC adapters... but STAY AWAY from those no-name cheap china adapters!! those have poor power filtering, electrical noise, poor grounding, etc....

Just because it fits in the same hole and has the same pins doesn't mean it's compatible. Using a cable not made for fast charging on an S6 would be like trying to jump start a car with a lamp cord. It could overheat at the cable, connector or battery. That's why using the wrong charger or cable voids most warranties. Here's one such case, if you are interested:
http://forum.xda-developers.com/oneplus-one/general/oneplus-one-melted-t3008581
The OP is lucky Samsung honored his warranty.

I call BS. MicroUSB is an industry standard. If they were not compatible not only would they not be able to call it that, but they would be subject to sanctions for violation the requirements for using standard cables ports of which the MicroUSB is currently is.
While you might not get the faster charge if you don't use their cable and their charger unless you are using very poorly made cables you will be just fine.
I charge my s6 most of the time with a BlackBerry charger for one of their discontinued tablets. 1.8A with 6ft fixed cable, I have 6 of them, they charge everything from tablets to phones. The white "short" Samsung cable and charger is in the box.

NOT ALL USB CABLES ARE MADE EQUAL:
http://thewirecutter.com/reviews/best-micro-usb-cable/
NOT ALL USB CHARGERS ARE MADE EQUAL:
http://www.righto.com/2012/10/a-dozen-usb-chargers-in-lab-apple-is.html

I think you should black out your serial imei
Sent from a mobile gadget.

Guys I just done a warning what's happened with my phone becose i used different types of micro usb cables.I don't want that to happen to your phones.But this is up to you.Sorry about my ime I have to delete the picture.

mariolcela said:
Guys I just done a warning what's happened with my phone becose i used different types of micro usb cables.I don't want that to happen to your phones.But this is up to you.Sorry about my ime I have to delete the picture.
Click to expand...
Click to collapse
It is a valid warning, I live I EU and I think that I can trust shops here to sell me good product ... I use original mini USB cables for all my gadgets and all of them are the same but even dispite that on my ex phone I had flimsy connection due to some damage to USB port even I used original cable and I give credit to my using the phone during charging and the fact that most of us use our little finger as a stand and then the USB tend to move a bit and damage is caused...
The truth is that not all are the same as some are faster and some are not ... But in the meaning of just the metal part of actual connector they should be the same by law if EU ...
Considering that in mind the only rule in buying accessory like cables should be are they been through a regulatory channels ....
Sent from my SM-G920F using XDA Free mobile app

mariolcela said:
I bought my S6 about 1 month ago and since then I have charged it with different micro usb cables.Afew days ago the phone was showing random "top up's" on screen like "power sharing connected",Samsung VR" and yesterday I couldn't charge my phone .I have been to Samsung Care shop to see what's going on.I left it for 1 day to fix it.Thanks God I didn't root it and didn't break the knox to 0x1 and them done the service for free under warranty for 2 years by Samsung.The Engineer told me to not use foreign micro usb cables to S6 because it's different micro usb and it will break.I hope someone will listen to me and to not do whst I done.The normal price to replace usb port to S6 is £253 so be careful guys.
Click to expand...
Click to collapse
I use my Nexus 6 charger & cable works fine. Very fast charging on both. Buy OEM cables, a bit more but no headaches...

I use either Qi charging or at home I have uGreen mUSB cables.
No issues with any.
Nor have I had with any phone I've owned.
And I've owned a LOT of phones (probably change my phone a minimum of twice a year)

This is not correct, at all!
Micro USB cables are a standard and every cable should be good to use in the S6. I use 3 cables with mine: The original cable, my Tab S cable and some cable I have for years (from an Huawei X5 or a Moto G, not sure) and haven't had any problem what so ever! As said before, just stay away from the 0,2€ chinese cables.

tiagovale2 said:
This is not correct, at all!
Micro USB cables are a standard and every cable should be good to use in the S6. I use 3 cables with mine: The original cable, my Tab S cable and some cable I have for years (from an Huawei X5 or a Moto G, not sure) and haven't had any problem what so ever! As said before, just stay away from the 0,2€ chinese cables.
Click to expand...
Click to collapse
Why did that happen to me then?i never used chinese cables.i have been using my genuine s4 and htc cable and the damage happened for 1 month after i bought it.so that will happen one day to someone else.if u have a look to the s6 usb port its a small difference between the other phones.it looks thinner.The engineer that fixed my phone advised me to use just S6 genuine usb to my S6.If you know all the Samsung S series have problems with usb port.

leeco charger and cable

I've heard stories about leeco bad quality cables so i want to know if it's safe to only use the charging brick with a Amazon basic cable?

Hi
You are right! The original leeco charger cable has very bad quality, the usb connector may burned because of this, so
nobody should use that!!
I really recommend the Oneplus DASH cable, that is not to expensive, but has a great quality!
Regards,
Daniel

Danika256 said:
Hi
You are right! The original leeco charger cable has very bad quality, the usb connector may burned because of this, so
nobody should use that!!
I really recommend the Oneplus DASH cable, that is not to expensive, but has a great quality!
Regards,
Daniel
Click to expand...
Click to collapse
What about the charging brick?

I think the original charging brick is quite good, but if I can, and I don't nedd a very fast charge, I am not using it!
I think the slow charging much better for the battery, but if you want to use the original fast charging brick you can use it without any danger!

The original charging brick is actually certified by Qualcomm. So it shouldn't have any issue.
https://www.qualcomm.com/documents/quick-charge-device-list
Also not all original cables cause problem; for example I used mine for about 4 months with no problem until it frayed and stopped charging. But it's still recommended to change the cable to avoid possible issues.