Database Users

help bootloop!!!

after three weeks everything ok,to day not start remains in bootloop.i have flashed the original firmware with odin LA3.ATO but is the same!!!.the firmware was the original with root and CWM.please help me!!!!

rimoragl said:
after three weeks everything ok,to day not start remains in bootloop.i have flashed the original firmware with odin LA3.ATO but is the same!!!.the firmware was the original with root and CWM.please help me!!!!
Click to expand...
Click to collapse
This thread is gonna get moved to Q&A, but, before it does...
First, try to boot into recovery and wipe cache and dalvik cache. If that doesn't work, you're probably going to need to flash a stock firmware via Mobile ODIN or the PC version of ODIN.
See the stickied thread with official firmwares in this section, then search XDA for how to flash via ODIN (I highly recommend Mobile ODIN). That should do the trick.
Steve

i have make all wipe but not change.i have flashed with odin 1.85 the stock firmware but is the same!

tell us a bit more detail how u flash and what u flash via odin

i have flashed the firmware P6800XXLA3 CSC ATO.with odin 1.85.but remainig in bootloop

Assuming that your download mode is fine
Can you enter recovery mode? What recovery. Stock or CWM?
If yes.. Your cache and dalvik need to be clean up..
When flashing with odin, Dont check repartition or use pit files, you dont need it except you know what to do..

I advise you to flash your machine with the following firmware ..... (see photo)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thanks,but when i try to download the firmware the link dont work:bad gateway.there is another link.

i have the link and i have flashed the P6800ZSLA2 EGY with odin 1.85 but is the same remaining in bootloop.after i have make the full wipe.

please i am very preoccupied,the problem is in the boot.

Thread Moved To General​
This is a development section, its not for questions. Please post in the correct section, and refer to the read before posting sticky for guidelines​

Install cwm recovery and download custom ROM from this thread http://forum.xda-developers.com/showthread.php?t=1520888
Move your zip file to sdcard / external sd card, and install from recovery,.. Tell me what happen after you done..

I did but not change!!!I 'never happened!this is not a BRICK.What you can 'do?
thanks

Have you done the Samsung stock recovery 3e data wipe/factory reset
And then reflash your stock firmware.
CWM data wipe or format is not good enough.
you might have to remove external sd card if 3e recovery goes to 'manual mode'.

i did exactly,but is the always the same:bootloop!!!is possible there is a virus?is possible to flash a firmware with Odin,with Bootloader and Pit?

excusme but i dont undestended the 3e recovery how i install.

my rooted GT7.7 with CWM also experience similar problem.
It stuck in the "Samsung Galaxy Tab 7.7" screen for around 5 mins and go into animation then growing "SAMSUNG" logo for another 5 mins.
Then finally it boot up normally. 8'(

/system Won't Mount - Am I Bricked?

What I did:
Was coming from an old version of OptimalROM, that I'd somehow installed to the main slot in safestrap, but that was a really long time ago. I believe it was an N12 based ROM, as I have an old G900vN12 firmware file in the same folder from when I did it originally.
I downloaded the Deodexed newest Optimal ROM, did a full safestrap backup to SD, and then followed the directions (coming from KitKat) exactly to Odin flash the new ROM. It appeared to work, but I got stuck at S5 logo screen forever.
So, tried again. Same result. Tried with battery pulled, same result.
So I shifted to the directions to restore to stock via Odin, and I can flash Kernels and FW's fine, PIT files appear to work, but every time I get to flashing a ROM, it hangs on the system.img.ext4 install forever. I've left it for hours, it's truly locking, always right there.
I initially tried NCG version, which I think was a mistake, but I didn't know the difference at first and just went with the oldest one. I then tried N12, and still got the same result. I can flash (via Odin) Kernels, Modems, FW's, just not ROMs. Every time, it hangs on system.img.ext4.
I connected via ADB but all I can do is verify the device is connected, if I try to sideload or push anything it just gives me "error: closed"
So I'm lost now. I can boot into download mode and recovery (recovery only if I flash a firmware, if I've tried to flash a ROM it fails.) In recovery mode it tells me that "E: failed to mount /system (Invalid argument)" and I believe that's at the core of the issue here. I've tried to issue commands via ADB to remount, but I get the same error.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I've read some places that people have success loading the correct FW or ROM with the appropriate PIT file in Odin, but I've tried that like 20 times and it doesn't work. I think I just need to find the correct Kernel/FW/ROM to flash, but I have no idea what to try next.
Edit - I also tried booting into Maintenance menu and wiping everything (data/cache) in there before a fresh attempt to install the retail N12 and Oc4 Kernels and ROMs, same issue.
I feel like I've borked the partitions and the PIT file isn't fixing them, and that's my main problem, but I honestly don't know enough to know.
Can anyone suggest anything? I'd be happy to just go back to stock, even - I need a functioning phone. Thanks!

extract the pit file with winrar from the tar file, tick repartition and flash the tar file

Wait, which tar file specifically do I extract it from? I don't see it in any of the main tars or in firmwares either. I'm using 7zip, not winrar, if that matters, but I don't see why it would.
Edit - Nevermind, I found it in the Stock ROM file, I wasn't using that one because it said "Mostly for Dev Edition" but will try it now and report back, thank you.

Well, that didn't really make progress. I did the following:
Tried to flash the ROM with the pit file and the box checked, locked up
reflashed the N12 Kernel/bootloader
Rebooted into maintenance, cleared data and cache, factory reset, rebooted into Odin
tried to flash the stock rom with pit, failed
reflashed the N12 Kernel/bootloader again
Rebooted into maintenance, cleared data and cache, factory reset, rebooted into Odin again
tried to flash the stock FW only, with pit, locks on Modem. (tried with and without battery)
That's it so far. Is it possible installing the stuff for the new deodexed OptimalROM might have moved me past being compatible with N12 stuff in general, even though it ultimately failed? If so, which version on this page should I be trying to restore? http://forum.xda-developers.com/showthread.php?t=2784880

Well, I'm all out of ideas, so unless anyone else can suggest something, I'm going to reactivate my old Galaxy Nexus and pray I have enough in my IT budget to buy myself a 6P this week.
If anyone can tell me a good basic strategy to get a bricked S5 back from the dead, let me know. I can still flash Kernels, and boot into Odin mode and Maintenance. No clue what else to do, I've tried everything I can at this point.

Would still like to know if there's an answer here, I got a 6P but I'd like to use this as a remote or something maybe, instead of a paperweight. Surely there's SOME way to revive it?

Do exactly what you did HERE except also check nand erase all
Then when phone reboots to recovery and does the android updating when that is finished when the phone reboots pull the battery and reboot back to recovery and wipe data then reboot

hello, I have the same problem, any help on how you can fix my phone again?
---------- Post added at 03:31 PM ---------- Previous post was at 02:51 PM ----------
jrkruse said:
Do exactly what you did HERE except also check nand erase all
Then when phone reboots to recovery and does the android updating when that is finished when the phone reboots pull the battery and reboot back to recovery and wipe data then reboot
Click to expand...
Click to collapse
the link don't work

giannnis12 said:
hello, I have the same problem, any help on how you can fix my phone again?
---------- Post added at 03:31 PM ---------- Previous post was at 02:51 PM ----------
the link don't work
Click to expand...
Click to collapse
The screen shot you had of Odin. Do that again then what I said

jrkruse said:
The screen shot you had of Odin. Do that again then what I said
Click to expand...
Click to collapse
I can not install the system file

giannnis12 said:
I can not install the system file
Click to expand...
Click to collapse
Then you are on boe1 or higher bootloader. You will probably need to use the bok3 factory tar image

jrkruse said:
Then you are on boe1 or higher bootloader. You will probably need to use the bok3 factory tar image
Click to expand...
Click to collapse
bok3 was the only rom that I don't try, everthing is ok now:good:
thank you
this rom is the best stock rom or is better other rom?

N9005 Note 3 bootloop/fails boot after rolling back to Kit Kat 4.4.2

Hi,
I upgraded from a rooted (Towelroot) stock 4.4.2 firmware DXUENE4 to stock 5.0 Lollipop DXUGBOF1 using Mobile Odin Pro. The process went smoothly. However, I lost root during the upgrade. The bootloader was NOT upgraded and remained at ENE4.
I decided to roll back to 4.4.2 and used Odin 3.09 to flash the previous stock 4.42 firmware (only Auto Reboot and F Reset Time options checked and stock 4.4.2 selected as PDA in Odin) . Odin completed without any errors but the phone now cannot boot past the glowing SAMSUNG logo. It would bootloop and give a few vibrations. I can boot into the stock recovery mode or download mode using the 3-button-method.
I have tried the usual battery pull and Wiping Cache and Factory Reset from Recovery. Nothing works - the phone is still stuck at the SAMSUNG logo after bootlooping a few times. I have tried reflashing with Odin and encountered no errors and this is the puzzling part as everything indicate a successful flash (see below).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone help?
Thanks.

After flashing kitkat ,, enter to recovery ,, and do :
1- wipe data factory reset
2- wipe cashe partition .

tarek.7aliem said:
After flashing kitkat ,, enter to recovery ,, and do :
1- wipe data factory reset
2- wipe cashe partition .
Click to expand...
Click to collapse
As I reported in my original post, I have done both 1. and 2. after each successful attempt at re-flashing 4.4.2. There are NO errors reported by Odin. I CAN access both recovery and download modes. But the phone just won't finish boot! It bootloops a couple of times and then gets stuck at the SAMSUNG logo!
At this point, I'm out of ideas.

are you downloaded the firmware from sammobile ?
- download odin v3.10
- in odin you will find ,,,, LOGO ... OPTION ,,, PIT
- click on option and check you are selecting (Auto reboot) and (F.reset time) only
- and it will okay be sure

tarek.7aliem said:
are you downloaded the firmware from sammobile ?
- download odin v3.10
- in odin you will find ,,,, LOGO ... OPTION ,,, PIT
- click on option and check you are selecting (Auto reboot) and (F.reset time) only
- and it will okay be sure
Click to expand...
Click to collapse
Firmware was from Sammobile. It is the same copy which I used to flash 4.4.2 last year so nothing has changed. As stated in my original post, I only checked Auto reboot and F reset time in Odin.
I'm not a newbie at flashing roms and have followed the proper steps and made the usual backups. If you read my original post, you would have noted that I have already gone through all that you suggested (and more than once) with no success.
I know that if Odin completes successfully, then a bootloop / stuck bootup is usually fixed by a battery pull and then booting into stock recovery, followed by wiping cache and a factory reset. However, having done all the above, the phone is still stuck at boot. Mine is an extraordinary situation, hence my request for help from the collective.
Thanks.

[HELP]My Phone still bootloop after Flash[HELP]

Anyone please help me
my Samsung note 4 still bootloop after flash stock rom
i already tried different stock rom
but its the same still bootloop
now i cant charge my Samsung note 4
but still can use "Download Mode"
but the "recovery mode" is not working
Please help
My Samsung note 4 Model: SM-N910G
Baseband Version: Unknown
Question: can i flash any baseband version?
please HELP

spleken001 said:
Anyone please help me
my Samsung note 4 still bootloop after flash stock rom
i already tried different stock rom
but its the same still bootloop
now i cant charge my Samsung note 4
but still can use "Download Mode"
but the "recovery mode" is not working
Please help
My Samsung note 4 Model: SM-N910G
Baseband Version: Unknown
Question: can i flash any baseband version?
please HELP
Click to expand...
Click to collapse
Flash this repair firmware via odin.this firmware comes with 5 files BL/AP/CP/CSC/PIT.
This is 5.0.1 lollipop firmware BTW but once your device is fully recovered you can take OTA update or flash 6.0.1 afterwards.
https://androidfilehost.com/?fid=24411628330025773
Open odin "run as administrator"
upload all files in odin 1 by 1
Connect device and start flash.
After odin show pass go to recovery and do factory reset/wipe cache.
Reboot and wait 5 to 10 minutes.
2nd option is you can flash twrp recovery and flash a custom rom.
Hopefully this will work otherwise your EFS partition could be corrupted.

Trex888 said:
Flash this repair firmware via odin.this firmware comes with 5 files BL/AP/CP/CSC/PIT.
This is 5.0.1 lollipop firmware BTW but once your device is fully recovered you can take OTA update or flash 6.0.1 afterwards.
https://androidfilehost.com/?fid=24411628330025773
Open odin "run as administrator"
upload all files in odin 1 by 1
Connect device and start flash.
After odin show pass go to recovery and do factory reset/wipe cache.
Reboot and wait 5 to 10 minutes.
2nd option is you can flash twrp recovery and flash a custom rom.
Hopefully this will work otherwise your EFS partition could be corrupted.
Click to expand...
Click to collapse
hi
thanks i will try this tomorrow
my phone is sick
i dont know how to charge it hahaha

Trex888 said:
Flash this repair firmware via odin.this firmware comes with 5 files BL/AP/CP/CSC/PIT.
This is 5.0.1 lollipop firmware BTW but once your device is fully recovered you can take OTA update or flash 6.0.1 afterwards.
https://androidfilehost.com/?fid=24411628330025773
Open odin "run as administrator"
upload all files in odin 1 by 1
Connect device and start flash.
After odin show pass go to recovery and do factory reset/wipe cache.
Reboot and wait 5 to 10 minutes.
2nd option is you can flash twrp recovery and flash a custom rom.
Hopefully this will work otherwise your EFS partition could be corrupted.
Click to expand...
Click to collapse
sir trexx can you also give me a link for SM-N910C version.. thanks

Jr0m said:
sir trexx can you also give me a link for SM-N910C version.. thanks
Click to expand...
Click to collapse
Here you go repair firmware for SM-N910C
https://androidfilehost.com/?fid=24269982087001472

Trex888 said:
Here you go repair firmware for SM-N910C
https://androidfilehost.com/?fid=24269982087001472
Click to expand...
Click to collapse
sir help please
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

spleken001 said:
sir help please
Click to expand...
Click to collapse
Fladh twrp and try different custom roms.

sir trexx can you also give me a link for SM-T719Y version.. thanks

spleken001 said:
Anyone please help me
my Samsung note 4 still bootloop after flash stock rom
i already tried different stock rom
but its the same still bootloop
now i cant charge my Samsung note 4
but still can use "Download Mode"
but the "recovery mode" is not working
Please help
My Samsung note 4 Model: SM-N910G
Baseband Version: Unknown
Question: can i flash any baseband version?
please HELP
Click to expand...
Click to collapse
After flashing stock, go to recovery and wipe data.
After that reboot.
It might work.

Dheway said:
sir trexx can you also give me a link for SM-T719Y version.. thanks
Click to expand...
Click to collapse
Are you aware that we are in a forum for Galaxy Note4 aka N910*?
Anyway, here is your link:
https://www.sammobile.com/samsung/galaxy-tab-s2/firmware/#SM-T719Y
Need an account for downloading.

I put my phone in a bootloop.

Yesterday I tried rooting my Samsung Galaxy S7 Edge using Odin CF autoroot with no experience at all. I did something wrong. When it wouldn't work at first and kept giving an error and "FAIL!" message I tried checking for the correct firmware so I googled my model number and found the one for my phone and downloaded it. I'm not sure what I did but my phone is in a bootloop whenever I turn it on and I can't go to recover mode, only download mode. How do I reinstall the correct firmware?
Please help me fix this. Hopefully I won't have to go to a store for repair...

Well u simply
1) go to sammobile
2) find ur model
3) download the latest firmware
4) extract the firmware
5) put the phone in download mode
6) open odin
7) connect phone
8) upload the extracted files to odin into there respective places
9) flash
the phone will automatically reboot after flashing is complete
NOTE: just be sure to flash model specific firmware.

flash stock rom with odin or use samsung software to fully restore original firmware

Alecia1212 said:
Well u simply
1) go to sammobile
2) find ur model
3) download the latest firmware
4) extract the firmware
5) put the phone in download mode
6) open odin
7) connect phone
8) upload the extracted files to odin into there respective places
9) flash
the phone will automatically reboot after flashing is complete
NOTE: just be sure to flash model specific firmware.
Click to expand...
Click to collapse
If I find the correct firmware will it just overwrite or must I remove the current one? I honestly have no idea how this works.

I had this problem once, you need to flash them Individually, one checkbox at per flash. The way to root ur phone should be magisk manager or supersu. First off you need twrp which is 3.2.1.1 that auto root thing in Odin doesn't work. Some custom rooms already have options for root so if ur a beginner it's best u try them.
---------- Post added at 11:09 PM ---------- Previous post was at 11:02 PM ----------
https://dl.twrp.me/hero2lte/twrp-3.2.1-1-hero2lte.img.tar.html
Flash this as ap it's a custom recovery that everyone uses here. Then use the keys power home vol down to force restart ur phone. Then power home vol up the moment it restarts to reach recovery. wipe everything then Flash a custom rom from the forums. I understand ur frustration that the phone has no way to turn off at all

When I try to flash the twrp-3.2.1-1-hero2lte.img.tar.md5 file Odin stops responding.

Don't flash Md5.
Flash the .tar file.

pingufanpoy said:
Don't flash Md5.
Flash the .tar file.
Click to expand...
Click to collapse
The non md5 download only has a recovery.img file which won't go into AP.

u flash it as a tar file not as the img file, you cant use .img files in odin
do not extract the img just flash the tar.
Btw in Odin the autoreboot and freset time don't matter they don't do anything because if you still don't have an os or recovery it will still send u to dl mode.
once u flash twrp it will automatically boot into recovery no need to hold keys. Then wipe ur phone and install either batman rom (an s8 port with Bixby) or superman rom (stock s7 edge firmware) both have customized installers that allow u to choose addons features and root.
U install custom roms by going to install button then selecting the zip. Also 2 main kernels that most people use are tgp kernel and superstock kernel.

dude, you're so smart, dont know what you're doing and you flash something without any knowledge and preparation...
that situation is fully on you

https://prnt.sc/iyosdg
I can't flash this.
https://prnt.sc/iyot25
Or this.

recovery.img comes in a .zip and nothing else is in it. If I don't extract it how do I flash it?? The .zip doesn't show up as an option in AP.

Deksastara said:
recovery.img comes in a .zip and nothing else is in it. If I don't extract it how do I flash it?? The .zip doesn't show up as an option in AP.
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Now Odin isn't detecting my phone in download mode. When it's in the bootloop Odin adds and removes it repeatedly.

Deksastara said:
Now Odin isn't detecting my phone in download mode. When it's in the bootloop Odin adds and removes it repeatedly.
Click to expand...
Click to collapse
if u flashed it with a green pass, u should be able to boot into custom recovery
power home and volume down for force restart
when phone shows s7 logo, power home vol up to reach recovery

It hasn't flashed. It stays on file analysis for hours.

It does that if your phone is disconnected and reconnected. Download the official Samsung USB drivers.
https://samsung-usb-driver-for-mobile-phones.en.lo4d.com/download

http://prntscr.com/iz109e
I've installed the driver. How long should this take? It isn't saying disconnected.

Flashing a custom recovery should only take 10 seconds. Custom rom 10 minutes. What is the model of your phone check the back of ur phone.

pingufanpoy said:
Flashing a custom recovery should only take 10 seconds. Custom rom 10 minutes. What is the model of your phone check the back of ur phone.
Click to expand...
Click to collapse
G935P.
It stays on "File analysis." Does this mean I don't have the right driver? If so, how do I find it? I downloaded the one from the link you shared.