Database Users

help bootloop!!!

after three weeks everything ok,to day not start remains in bootloop.i have flashed the original firmware with odin LA3.ATO but is the same!!!.the firmware was the original with root and CWM.please help me!!!!

rimoragl said:
after three weeks everything ok,to day not start remains in bootloop.i have flashed the original firmware with odin LA3.ATO but is the same!!!.the firmware was the original with root and CWM.please help me!!!!
Click to expand...
Click to collapse
This thread is gonna get moved to Q&A, but, before it does...
First, try to boot into recovery and wipe cache and dalvik cache. If that doesn't work, you're probably going to need to flash a stock firmware via Mobile ODIN or the PC version of ODIN.
See the stickied thread with official firmwares in this section, then search XDA for how to flash via ODIN (I highly recommend Mobile ODIN). That should do the trick.
Steve

i have make all wipe but not change.i have flashed with odin 1.85 the stock firmware but is the same!

tell us a bit more detail how u flash and what u flash via odin

i have flashed the firmware P6800XXLA3 CSC ATO.with odin 1.85.but remainig in bootloop

Assuming that your download mode is fine
Can you enter recovery mode? What recovery. Stock or CWM?
If yes.. Your cache and dalvik need to be clean up..
When flashing with odin, Dont check repartition or use pit files, you dont need it except you know what to do..

I advise you to flash your machine with the following firmware ..... (see photo)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

thanks,but when i try to download the firmware the link dont work:bad gateway.there is another link.

i have the link and i have flashed the P6800ZSLA2 EGY with odin 1.85 but is the same remaining in bootloop.after i have make the full wipe.

please i am very preoccupied,the problem is in the boot.

Thread Moved To General​
This is a development section, its not for questions. Please post in the correct section, and refer to the read before posting sticky for guidelines​

Install cwm recovery and download custom ROM from this thread http://forum.xda-developers.com/showthread.php?t=1520888
Move your zip file to sdcard / external sd card, and install from recovery,.. Tell me what happen after you done..

I did but not change!!!I 'never happened!this is not a BRICK.What you can 'do?
thanks

Have you done the Samsung stock recovery 3e data wipe/factory reset
And then reflash your stock firmware.
CWM data wipe or format is not good enough.
you might have to remove external sd card if 3e recovery goes to 'manual mode'.

i did exactly,but is the always the same:bootloop!!!is possible there is a virus?is possible to flash a firmware with Odin,with Bootloader and Pit?

excusme but i dont undestended the 3e recovery how i install.

my rooted GT7.7 with CWM also experience similar problem.
It stuck in the "Samsung Galaxy Tab 7.7" screen for around 5 mins and go into animation then growing "SAMSUNG" logo for another 5 mins.
Then finally it boot up normally. 8'(

How to Unbrick Samsung Galaxy S4?

Hello
I'll cut to the chase already because I'm desperate, I bought a galaxy s4 yesterday and hated the rom that came with it, I decided to return the root and rom rom by google.
I followed this tutorial, my s4 is the GT-I9505 4G purchased at VIVO (and modified by vivo too)
I used this rom: https://mega.co.nz/#!Ug5H3ByL!Q6K1Ig41xsFAL5GS79SZVzR2rR8iNPSsR1CYodf7oog
I got here: http://forum.xda-developers.com/showthread.php?t=2348272
At 10:40 of the video you can see that soon changes the logo s4 to the boot animation, I waited 30 minutes and nothing happened here, his is in seconds.
I read that-2.6.0.0 TWRP Recovery Mode could have caused the bootloop
I switched to TWRP 2.6.0.0-a modified version (one that I found to download) the-TWRP 2.5.0.2
I did wipes straights and choked install, over 16 minutes and nothing happened.
not sure anymore if I'm with bootloop or not, I saw a video of him and the screen flashes and lights, my stays on, so leave more than 30 minutes even?I left a few hours while sleeping (or at least tried) and continued at the boot
I can not access the phone by pc, how will a new rom on it?I installed the drivers that were recommended
Help me guys :crying:
and sorry for the horrible english, I'm translating the messages!
EDIT:
When I mount the sd recovery mode by:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Usual story mate.
Download stock rom from Sammobile and flash using Odin.
Bit of advice..... Don't use TWRP, use latest CWM or Philz recovery instead
Sent from my GT-I9505 whilst taking a s**t

Obagleyfreer said:
Usual story mate.
Download stock rom from Sammobile and flash using Odin.
Bit of advice..... Don't use TWRP, use latest CWM or Philz recovery instead
Sent from my GT-I9505 whilst taking a s**t
Click to expand...
Click to collapse
can you give me the link to download the CWM version for my S4?

Kilowog01 said:
can you give me the link to download the CWM version for my S4?
Click to expand...
Click to collapse
Here you go mate.
I would personally install Philz CWM recovery though. you can find it in S4 Original Development forum.

Obagleyfreer said:
Usual story mate.
Download stock rom from Sammobile and flash using Odin.
Bit of advice..... Don't use TWRP, use latest CWM or Philz recovery instead
Sent from my GT-I9505 whilst taking a s**t
Click to expand...
Click to collapse
which version of odin you recommend I use?how do I put this recovery mode if the file is .img?

Kilowog01 said:
which version of odin you recommend I use?how do I put this recovery mode if the file is .img?
Click to expand...
Click to collapse
Hi,
Look HERE
ODIN 3.04 works well.

N9005 Note 3 bootloop/fails boot after rolling back to Kit Kat 4.4.2

Hi,
I upgraded from a rooted (Towelroot) stock 4.4.2 firmware DXUENE4 to stock 5.0 Lollipop DXUGBOF1 using Mobile Odin Pro. The process went smoothly. However, I lost root during the upgrade. The bootloader was NOT upgraded and remained at ENE4.
I decided to roll back to 4.4.2 and used Odin 3.09 to flash the previous stock 4.42 firmware (only Auto Reboot and F Reset Time options checked and stock 4.4.2 selected as PDA in Odin) . Odin completed without any errors but the phone now cannot boot past the glowing SAMSUNG logo. It would bootloop and give a few vibrations. I can boot into the stock recovery mode or download mode using the 3-button-method.
I have tried the usual battery pull and Wiping Cache and Factory Reset from Recovery. Nothing works - the phone is still stuck at the SAMSUNG logo after bootlooping a few times. I have tried reflashing with Odin and encountered no errors and this is the puzzling part as everything indicate a successful flash (see below).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Can anyone help?
Thanks.

After flashing kitkat ,, enter to recovery ,, and do :
1- wipe data factory reset
2- wipe cashe partition .

tarek.7aliem said:
After flashing kitkat ,, enter to recovery ,, and do :
1- wipe data factory reset
2- wipe cashe partition .
Click to expand...
Click to collapse
As I reported in my original post, I have done both 1. and 2. after each successful attempt at re-flashing 4.4.2. There are NO errors reported by Odin. I CAN access both recovery and download modes. But the phone just won't finish boot! It bootloops a couple of times and then gets stuck at the SAMSUNG logo!
At this point, I'm out of ideas.

are you downloaded the firmware from sammobile ?
- download odin v3.10
- in odin you will find ,,,, LOGO ... OPTION ,,, PIT
- click on option and check you are selecting (Auto reboot) and (F.reset time) only
- and it will okay be sure

tarek.7aliem said:
are you downloaded the firmware from sammobile ?
- download odin v3.10
- in odin you will find ,,,, LOGO ... OPTION ,,, PIT
- click on option and check you are selecting (Auto reboot) and (F.reset time) only
- and it will okay be sure
Click to expand...
Click to collapse
Firmware was from Sammobile. It is the same copy which I used to flash 4.4.2 last year so nothing has changed. As stated in my original post, I only checked Auto reboot and F reset time in Odin.
I'm not a newbie at flashing roms and have followed the proper steps and made the usual backups. If you read my original post, you would have noted that I have already gone through all that you suggested (and more than once) with no success.
I know that if Odin completes successfully, then a bootloop / stuck bootup is usually fixed by a battery pull and then booting into stock recovery, followed by wiping cache and a factory reset. However, having done all the above, the phone is still stuck at boot. Mine is an extraordinary situation, hence my request for help from the collective.
Thanks.

Odin FAIL at modem.bin with genuine firmware for S6 edge+ (G928F)

Hi folks,
I am trying to flash this firmware onto my s6 edge+
G928FXXS5CRH1_G928FDBT4CRF1_DBT (newest samsung official binary)
but Odin will FAIL right after modem.bin (see screenshot)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I don't know why this happens Please help to find out.
Before I tried to flash the firmware mentioned above, another samsung official was installed:
G928FXXU4CRF4_G928FOXA4CRE1_BTU
Now any attempt to flash former binary will also fail (because older bootloader??)
I'm stuck here Please help!

m0tt3 said:
Hi folks,
I am trying to flash this firmware onto my s6 edge+
G928FXXS5CRH1_G928FDBT4CRF1_DBT (newest samsung official binary)
but Odin will FAIL right after modem.bin (see screenshot)
I don't know why this happens Please help to find out.
Before I tried to flash the firmware mentioned above, another samsung official was installed:
G928FXXU4CRF4_G928FOXA4CRE1_BTU
Now any attempt to flash former binary will also fail (because older bootloader??)
I'm stuck here Please help!
Click to expand...
Click to collapse
I have the same problem with that file : THL-G928CXXS4CRF5-20180705114510.zip it worked before, but not anymore, my device is softbricked.

chongtak said:
I have the same problem with that file : THL-G928CXXS4CRF5-20180705114510.zip it worked before, but not anymore, my device is softbricked.
Click to expand...
Click to collapse
Which version is currently installed? (you can check it in recovery mode)
Most likely you are not able to install former version because it has an older bootloader.
In my case "S5" ist installed, so I am not able to downgrade to "U4", which was installed before

m0tt3 said:
Hi folks,
I am trying to flash this firmware onto my s6 edge+
G928FXXS5CRH1_G928FDBT4CRF1_DBT (newest samsung official binary)
but Odin will FAIL right after modem.bin (see screenshot)
I don't know why this happens Please help to find out.
Before I tried to flash the firmware mentioned above, another samsung official was installed:
G928FXXU4CRF4_G928FOXA4CRE1_BTU
Now any attempt to flash former binary will also fail (because older bootloader??)
I'm stuck here Please help!
Click to expand...
Click to collapse
Use samfirm for your newest firmware and use the region option for your current region. (it should work properly) if you get hidden.img failure, remove from package and repack .tar

Use updato.com to download latest firmware with full speed download.

I'm having the same issue. I wiped everything with TWRP and was going to reinstall the OS, but I'm getting the same fail as you do. I'm trying to flash the same version as I did before wiping everything.
Any ideas?

WVWVWVW said:
I'm having the same issue. I wiped everything with TWRP and was going to reinstall the OS, but I'm getting the same fail as you do. I'm trying to flash the same version as I did before wiping everything.
Any ideas?
Click to expand...
Click to collapse
Got this fixed by removing hidden.img from the file I was flashing

WVWVWVW said:
Got this fixed by removing hidden.img from the file I was flashing
Click to expand...
Click to collapse
You just saved me! Thanks a lot! I thought I was stuck on CM 14.1. Just removing hidden.img fixed my flashing issues.

same here always stuck or error on modem.img so after unclick hidden.img use z3x it worked mine is G928GUBS5CRH1

Or you can try with this. Fix the phone is bricked, black screen and more by flash a new ROM for Samsung Galaxy phone. Maybe not the newest firmware, but works perfectly.
https://www.youtube.com/watch?v=zXSHe3oorIM

I have better solution download this stock rom this is the latest and its binary 5 the latest one
Stock Rom:*SM-G928F_G928FXXU5CRI1_G928FDDX4CRF1_4Files_7.0.rar
Size: 2.0 GB
Security Patch Level: U5
Android:*7.0 Nougat
Model: SM-G928F
Model Name: Samsung Galaxy S6 EDGE+
Download this rom from site FirmwareX.net
Try will work for u

Purpp said:
Use samfirm for your newest firmware and use the region option for your current region. (it should work properly) if you get hidden.img failure, remove from package and repack .tar
Click to expand...
Click to collapse
hii i got same problem how to remove and repack wicht too did you used

help bricked S7 EDGE

hi guys factory restored my S7E and imedatily tried to flash twrp recovery on it, twrp loaded successfully but i forgot to enable oem unlock so the phone never booted again now everytime i try to flash stock firmware it says [fail] on odin i tried every version of android that came out for the s7 and recently when i tried flashing the lastest verion of oreo it gave me the "sw rev. check fail (bootloader) device 2 binary 1 please help

try smart switch emergency recovery application on windows m8

davviiiid_ said:
hi guys factory restored my S7E and imedatily tried to flash twrp recovery on it, twrp loaded successfully but i forgot to enable oem unlock so the phone never booted again now everytime i try to flash stock firmware it says [fail] on odin i tried every version of android that came out for the s7 and recently when i tried flashing the lastest verion of oreo it gave me the "sw rev. check fail (bootloader) device 2 binary 1 please help
Click to expand...
Click to collapse
the rom version is outdated, it downloads the latest and passes through odin

tsimitsangaz said:
try smart switch emergency recovery application on windows m8
Click to expand...
Click to collapse
i tried that to be honest with you but they removed the feature that lets you restore

I did the same thing actually, but flashing the newest stock software helped with that issue.
Wysłane z mojego SM-G935F przy użyciu Tapatalka

flash newest stock firmware for your phone with Odin and everyting will be fine

Try using a different version of odin there also one thats been patched you could try

Matthewwwww1998 said:
Try using a different version of odin there also one thats been patched you could try
Click to expand...
Click to collapse
Maybe I'll try the latest of every thing again
Because smart switch has been totally patched
Because I got an older version of smart switch and it gave me the error " your device does not support initialisation"

davviiiid_ said:
hi guys factory restored my S7E and imedatily tried to flash twrp recovery on it, twrp loaded successfully but i forgot to enable oem unlock so the phone never booted again now everytime i try to flash stock firmware it says [fail] on odin i tried every version of android that came out for the s7 and recently when i tried flashing the lastest verion of oreo it gave me the "sw rev. check fail (bootloader) device 2 binary 1 please help
Click to expand...
Click to collapse
You can do it with latest stock rom but you also need latest odin tool

gupt07ash said:
You can do it with latest stock rom but you also need latest odin tool
Click to expand...
Click to collapse
okay i guess ill cross my fingers and try it one more time, hopefully my phone doesnt end up as a permanant paperweight

davviiiid_ said:
okay i guess ill cross my fingers and try it one more time, hopefully my phone doesnt end up as a permanant paperweight
Click to expand...
Click to collapse
Use my firmware link for stock rom
https://gsmhungvu.com/samsung-g935fd-firmnware-file-android-oreo-8-0/
Or I'll upload my twrp rom backup if it doesn't work later

Okay I downloaded the new rom flashed it and everything and now the situation has improved slightly , currently it's stuck on the "Samsung Galaxy S7 edge " screen any suggestions?

davviiiid_ said:
Okay I downloaded the new rom flashed it and everything and now the situation has improved slightly , currently it's stuck on the "Samsung Galaxy S7 edge " screen any suggestions?
Click to expand...
Click to collapse
Hey if twrp loads successfully wipe all except sd and flash a custom rom. Custom rom will help to boot and then you make sure oem unlock is enabled. Then just go back to download mode and flash stock rom again. Success

davviiiid_ said:
Okay I downloaded the new rom flashed it and everything and now the situation has improved slightly , currently it's stuck on the "Samsung Galaxy S7 edge " screen any suggestions?
Click to expand...
Click to collapse
Boot to recovery manually and wipe cache and factory reset

It won't go into recovery its just stuck on the boot screen "samsung galaxy S7 edge" i tried reflashing software aswell

davviiiid_ said:
It won't go into recovery its just stuck on the boot screen "samsung galaxy S7 edge" i tried reflashing software aswell
Click to expand...
Click to collapse
Bricked
Frp lock must be disabled

davviiiid_ said:
It won't go into recovery its just stuck on the boot screen "samsung galaxy S7 edge" i tried reflashing software aswell
Click to expand...
Click to collapse
David share a screenshot of your device in download mode

gupt07ash said:
David share a screenshot of your device in download mode
Click to expand...
Click to collapse
it took me a while to find a decent place to post but as you can see frp was turned off
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

davviiiid_ said:
it took me a while to find a decent place to post but as you can see frp was turned off
Click to expand...
Click to collapse
You should be able to flash twrp recovery bro since the frp is off. I got someone's G935F working. Was giving same problems as yours like stuck on splash. It can be recovered. Here are some screenshots of his device...
https://dl.twrp.me/hero2lte/twrp-3.2.3-0-hero2lte.img.tar
Manually try to boot into it. It will work just keep trying

Make sure you flash it right
Once you get into recovery, wipe everything
And I've uploaded my twrp backup yesterday
So you'll be able to restore it after advanced wipe all