Database Users

ALE-L21C432B210 - Marshmallow only for specific firmwares ? - P8lite Q&A, Help & Troubleshooting

Hi there,
I havent done ROM updates for some time and got my hands on a "Huawei P8 Lite" (Build ALE-L21C432B210) EMUI 3.1. - DUAL SIM.
germany - telekom (debitel)
Happy to see google says it got a Android 6.0 Update, but I had to realize it was taken down back then already...just to read I need the app Hi-Care,
which I installed but which didnt offer an update to me though, saying I got the latest already (ALE-L21C432B210)
This is also what the "built-in" update says when connected to WLAN.
I found instructions on how to update to 6.0, but instructions say, that only the following Firmwares are compatible : (?)
https://www.huaweiblog.de/downloads/huawei-p8-lite-firmware-update-b550-offiziell-download/
ALE-L21C432B524
ALE-L21C432B194
ALE-L21C432B188
ALE-L21C432B170
ALE-L21C432B010
and/or
B170
B183
B194
B199
B200
B550
B551
B560
So my ALE-L21C432B210 (B210) is not enlisted. Does this mean my Huawei P8 Lite cant get Android 6.0 (yet) ?
Because I also found this one : (B584 - Dual SIM)
https://www.huaweiblog.de/downloads/huawei-p8-lite-firmware-b584-und-b585-verfuegbar/
Can I use this one ? :S
Or can I straight start with this B594 full update ? (no mention of Dual SIM)
https://www.huaweiblog.de/software/update/huawei-p8-lite-b594-bringt-sicherheitspatch/
And why does my autoupdate from the phone say "you are up to date",
but this guy from germany "Willi" says his ALE-L21C432B210 updated automatically to ALE-L21C432B554 :
https://www.huaweiblog.de/downloads/huawei-p8-lite-firmware-update-b550-offiziell-download/
I remember that official ROMS got restrictions for specific regions or specific Model numbers...is that the case here or am I missing something ?
Why do some say its a rare firmware with no update yet...while others claim it even auto updated itself already to Marshmallow in 2016 ?
Whats the reason ? Feeling quite dissapointed and dumb right now. ^^ Never experienced such a mess when it comes to an update.
p.s.
a.) Is it normal that if connected via usb to HiSuite, that the display keeps turning on saying "Connected via USB", even if I switch the display off via the power button ?
(it charges normally, without turnign the display on after turning it off) -> might be PC usb port or the Huawei app....
b.) My device got delivered (sealed package) with developer mode visible and already activated...is that a standard now ?
Regards

Same situation here (B210, Germany). No update available via HiCare or system updates.
The latest firmware available for download from consumer.huawei.com/de/support/mobile-phones/p8lite_de-sup.htm is B564; supported versions for upgrading are
ALE-L21C432B560
ALE-L21C432B550
ALE-L21C432B524
ALE-L21C432B204
ALE-L21C432B200
ALE-L21C432B194
ALE-L21C432B170
ALE-L21C432B010
according to the documentation in the firmware zip - but no B210.
Is there anyone who got an OTA update to Marshmallow for B210 in Germany?
-Charlie

charlie-charlie said:
Same situation here (B210, Germany). No update available via HiCare or system updates.
The latest firmware available for download from consumer.huawei.com/de/support/mobile-phones/p8lite_de-sup.htm is B564; supported versions for upgrading are
ALE-L21C432B560
ALE-L21C432B550
ALE-L21C432B524
ALE-L21C432B204
ALE-L21C432B200
ALE-L21C432B194
ALE-L21C432B170
ALE-L21C432B010
according to the documentation in the firmware zip - but no B210.
Is there anyone who got an OTA update to Marshmallow for B210 in Germany?
-Charlie
Click to expand...
Click to collapse
Probably just the "Willi" from my link above ;D
This feels very strange to me :/

Looks like I always get my hands on the "out of the ordinary" phones. -_-

What would happen if you would install FULL latest emui via fastboot?

Audriuskins said:
What would happen if you would install FULL latest emui via fastboot?
Click to expand...
Click to collapse
nothing..... Atleast nothing happened to me....Just new system and install

@itsmemario
Einmal richtig gegoogelt und du hättest alles gefunden.
Once properly googled and you would have found everything.
https://forum.xda-developers.com/p8lite/help/update-to-android-6-0-t3498528
http://www.android-hilfe.de/thema/update-huawei-p8-lite-b210.808978/

FYI:
Manual update to B564 (latest available via official support at consumer.huawei.com/de/support/mobile-phones/p8lite_de-sup.htm) does not work for me. Fails with error message "Software install failed!".

@charlie-charlie
Du hast ein Branding Telefon der Telekom und bist von deren Firmware abhängig.
Du wist nie eine "allgemeine" Firmware auf das Handy bekommen, außer es wird unBranding.
Leider kann ich kein Englisch und muss mich mit einen Übersetzer herumschlagen
Translated with Google
You have a Branding Telefon of the Telekom and are dependent on their firmware.
You wist never get a general firmware on the phone unless it is unBranding.

@Wolf1953
Tatsächlich handelt es sich bei mir um ein frisch gekauftes Gerät ohne Branding. Jedenfalls wurde es so auf Amazon angeboten, und ich sehe auch nirgendwo was von Telekom. Komischerweise finde ich aber auch nirgendwo was zur Herkunft der Version B210.
English: Unbranded device freshly bought from Amazon.

@charlie-charlie
@itsmemario
Hier ist die Lösung
Here is the solution
https://forum.xda-developers.com/showpost.php?p=69714501&postcount=10
https://forum.xda-developers.com/p8lite/help/p8-lite-soft-brick-help-t3501908/post69714302
Good luck! Wolfgang
PS : NEW Downloads
Huawei Update Extraktor : https://forum.xda-developers.com/showthread.php?t=2433454
B132 : http://www.carbontesla.com/2015/09/download-huawei-p8-lite-b132-firmware-dual-sim/
OTA-B170 : https://mega.nz/#!XAlCSLqQ!EhBUXcrvbt1pluokN4uGZeIs9RsMwKwa6J0g1i8oGjM
FULL-B170 : http://www.carbontesla.com/2015/11/huawei-p8-lite-ale-l21-stock-b170-lollipop-firmware/
B574 : http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v56678/f1/full/update.zip

Wolf1953 said:
@charlie-charlie
@itsmemario
Hier ist die Lösung
Here is the solution
https://forum.xda-developers.com/showpost.php?p=69714501&postcount=10
https://forum.xda-developers.com/p8lite/help/p8-lite-soft-brick-help-t3501908/post69714302
Good luck! Wolfgang
PS : NEW Downloads
Huawei Update Extraktor : https://forum.xda-developers.com/showthread.php?t=2433454
B132 : http://www.carbontesla.com/2015/09/download-huawei-p8-lite-b132-firmware-dual-sim/
OTA-B170 : https://mega.nz/#!XAlCSLqQ!EhBUXcrvbt1pluokN4uGZeIs9RsMwKwa6J0g1i8oGjM
FULL-B170 : http://www.carbontesla.com/2015/11/huawei-p8-lite-ale-l21-stock-b170-lollipop-firmware/
B574 : http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v56678/f1/full/update.zip
Click to expand...
Click to collapse
-Also phone unlocked via code durchgeführt.
-Unlocked phone via huawei code
-Es ist ein debitel/telekom Gerät, ich habe leider keine fremde Simkarte zum Testen, da hier alle Telekom haben
-Its a debitel/telekom device, I dont have a sim card to test, to see if other providers work.
-Wie teste ich ob es gebranded ist ?
-How to check if its branded ?
-Wenn es gebranded ist, dann lieber gar nicht erst die img Dateien aus dem 132'er ROM mit fastboot flashen
-If its branded I better not flash the img files from the 132 ROM ?
Regards

Translated with Google
The "branded" is not to compare with the 24 month lock, where you can only use these providers Sim cards.
It refers to the firmware you have on it. Updates and updates of some pre-installed APP updates are only available from the PROVIDER.
With this procedure the firmware is deleted by the provider and you then have a NEUTRAL EUROPEAN VERSION on it, where then the update over HUAWEI runs.

Update: I talked to Huawai German support staff. According to them, Marshmallow OTA update for my B210 is expected to be rolled out in March. Guess I'll wait and see...
And thanks for all the help!

Thanks to Wolf !
Here is a(nother) step-by-step-by-step guide, exactly how I did it.
You cant miss anything (P8 Lite DUAL Sim Europe)
german:
1.)
Handy mit" VOL Down gedrückt halten" an USB angeschlossen, "FASTBOOT&RESCUE MODE" erscheint.
2.)
Ganz wichtig, dort muss in rot stehen (Phone Unlocked) !!!
Steht dort phone locked, erst den unlock process über die Huawei Seite ausführen
3.)
B132 runtergeladen, die entsprechenden IMG Dateien entpackt und mit mfastboot geflasht.
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash cust cust.img
mfastboot flash system system.img
Alle benötigten downloads hier :
http://www.android-hilfe.de/thema/u...ungsvorschlag-xda-forum.821527/#post-10352247
mfastboot kann große Dateien besser flashen, daher nicht über die folgende Meldung wundern,
wenn die 2 gigabyte große Datei geflasht wird : (mfastboot system system.img)
_______________________________________________________________
-target max download size 450 MB
Spare Flash is enabled
sending sparse system (450mb)
sending sparse system (420mb)
sending sparse system (420mb)
sending sparse system (420mb)
sending sparse system (1mb)
_______________________________________________________________
-Dann kam "Android wird aktualisiert" (bis 137 von 137)
_______________________________________________________________
-Werksreset ausführen !
_______________________________________________________________
-EMUI LOGO und "User reset, erase internal sd card..." erscheint
(das ging sehr schnell, 30 Sekunden)
_______________________________________________________________
-Das Huawei Logo erscheint für 30 Sekunden und der Ton wird abgespielt.
_______________________________________________________________
-Das Handy ist nun im Auslieferungszustand
_______________________________________________________________
-Handy eingerichtet, geprüft ob USB Debugging weiterhin aktiv ist, neugestartet
_______________________________________________________________
-Habe dann vom "B170 OTA Update" den "dload" Ordner mit der "update.zip" darin auf den internen Speicher kopiert.
(also nicht FULL sondern die 330MB OTA Variante, damit es weiterhin spannend bleibt >_< )
_______________________________________________________________
Im Menu also Update "lokales Update" angewählt, welches dann als "Teilpaket: update.zip"
angezeigt wird..."Bitte installieren sie es"...wer kann bei so einer Meldung schon wiederstehen ?
_______________________________________________________________
-update.zip angetippt...Gerät startet neu
_______________________________________________________________
-Huawei Logo (kein sound mehr), EMUI Logo..."Huawei Software Installing" (1%-90%)
Dies dauerte gute 10 Minuten...bei 90% plötzlich "Update Success" ...device restarting...
_______________________________________________________________
-Huawei Logo (mit Sound und Animation) - Android wird aktualisiert (133 von 133)
_______________________________________________________________
-Update B574 auf das Gerät kopiert (dload Ordner)
_______________________________________________________________
-Update.zip (B574) auf dem Gerät angetippt
_______________________________________________________________
-Huawei Software installing
_______________________________________________________________
-Neustart
_______________________________________________________________
-EMUI Logo - System wird optimiert...
_______________________________________________________________
-WLAN aktiviert, nach Updates gesucht, es findet nichts
_______________________________________________________________
-Also Download Huawei P8 Lite B584 Marshmallow Update [Dual SIM] [Europe]
_______________________________________________________________
-Problem, jetzt ist der Menupunkt "lokales Update" in B574 verschwunden
Also die "update.zip" entpacken und nur die Datei "update.app" in den dload Ordner auf dem Gerät kopieren.
Dann neustarten mit VOLUp+VOLDown+Power und 584 bzw. 594 installiert sich dann selbst,
startet nochmals neu und optimiert sich nocheinmal.
p.s. B594 ist da
https://www.huaweiblog.de/software/update/huawei-p8-lite-b594-bringt-sicherheitspatch/ (Danke nochmals an Wolf !)
=====================================================================================================
english:
1.)
Connect phone with "VOL Down" pressed to USB - FASTBOOT&RESCUE MODE shows up.
2.)
You need to see (Phone Unlocked) !!!
If it says phone locked, unlock your via the huawei site 1st !!!
3.)
Download B132, extract it and flash the follwing files using mfastboot, not fastboot !
mfastboot flash boot boot.img
mfastboot flash recovery recovery.img
mfastboot flash cust cust.img
mfastboot flash system system.img
All required download here :
http://www.android-hilfe.de/thema/u...ungsvorschlag-xda-forum.821527/#post-10352247
mfastboot has no problems flashing very big files !
Dont panic if the following messages show up when you flah system : (mfastboot system system.img)
_______________________________________________________________
-target max download size 450 MB
Spare Flash is enabled
sending sparse system (450mb)
sending sparse system (420mb)
sending sparse system (420mb)
sending sparse system (420mb)
sending sparse system (1mb)
_______________________________________________________________
-Phone starts message "Android gets updatet (137 to 137)" shows up
_______________________________________________________________
-Factory Reset !
_______________________________________________________________
-EMUI LOGO and "User reset, erase internal sd card..." shows up
(around 30 seconds)
_______________________________________________________________
-Huawei Logo shows up for about 30 seconds and a sound is played
_______________________________________________________________
-Phone is now resetted
_______________________________________________________________
-Set it up if you want and check if USB debugging is still enabled
_______________________________________________________________
-Cop "B170 OTA Update" folder "dload" with the "update.zip" to your internal phone memory
_______________________________________________________________
-Tip the "part update" in the menu "local update"
_______________________________________________________________
-Device reboots
_______________________________________________________________
-Huawei logo with no sound shows up "Huawei Software Installing" (1%-90%)"
Takes approx. 10 minutes and at 90% it says "Update success"...and restarts
_______________________________________________________________
-Huawei Logo (with Sound and Animation) - Android gets updatet (133 to 133)
_______________________________________________________________
-Copy Update B574 to your device (dload Ordner)
_______________________________________________________________
-Tip Update.zip (B574) in local update
_______________________________________________________________
-Huawei Software installing
_______________________________________________________________
-Restarts
_______________________________________________________________
-EMUI Logo - System getting optimized...
_______________________________________________________________
-WLAN wont find any updates now
_______________________________________________________________
-So Download Huawei P8 Lite B584 Marshmallow Update [Dual SIM] [Europe]
_______________________________________________________________
-Problem, menu "locale Update" dissapeared in B574
So, only copy the file "update.app" from the file "Update.zip" to the dload folder on your device
and restart the device with VOLUp+VOLDown+Power. It will update automatically then and do some optimizing.
Or you can only flash it via "VolUP+VolDOWN+Power" or *#*#2846579#*#*
Project Menu -> Software Upgrade -> SD card (yes you will need SD card)
p.s. B594 arrived as well
https://www.huaweiblog.de/software/update/huawei-p8-lite-b594-bringt-sicherheitspatch/ (Danke nochmals an Wolf !)

To wrap this up: B210 is now getting B584 as OTA update, immediately followed by B594 via OTA.

Mine is B160.... what should I do?

Related

Hello,
on my Blue Angel is Windows 2003.
For upgrading to Mobile 6.1 I wanted to expand the memory like shown in the main thread from WIKI.
They say:
Install xda-developers_Unlocker.CAB by tapping on it in filemanger (from the directory where you put it earlier)
Then go to start -> Programs -> ExtROM tools -> then first run "unhide", then "Unlock".
I made it step by step.
When I now try to open the files unhide and unlock the MDA says, he does not find the files. In one thread they say, the solution is a special german cab.
Where can I find it or what else can I do to extend the memory?
Bye
ullihaush

the problem is that this unlocker installs itself to the standard program folder, which on an english rom would be "\program files\" but on a german rom it's "\programme\" but the shortcut on startmenu is written to \program files.
since you don't need any other program files anymore as you intend to flash it again anyway, you can simply rename the programme folder to program files or move the program on file explorer to the program files folder, so the startmenu short cuts can find the unlocker.
das problem ist, dass der unlocker in das standard verzeichnis fuer programme installiert wird, die startmenue eintraege aber eine genaue location haben, das heisst bei deiner deutschen rom landet der unlocker in \programme\ statt in \program files\ was allerdings der ort ist, wo die verknuepfungen im startmenue hinfuehren, da man die verknuepfungen nur schlecht aendern kann, empfehle ich dir, im datei explorer den ordner "programme" in "program files" umzubenennen, da du den eh nicht mehr brauchst, wenn du upgraden willst oder alternativ, verschiebe den unlocker in den ordner program files, bzw erstelle den, damit die startmenue eintraege halt auch wo hin fuehren, hatte das genau gleiche problem und habe mir damit beholfen, geht einfach schneller als ne andere cab rauszusuchen und zu installieren

leider immer noch nicht
Hi Chef_Tony,
thanks for the fast respond.
The problem is still there. I can unhide it now, but when I tip on the unlock file, it says: Debug ERROR:
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed"
Do you have any idea?
done found the solution. Made new folder and it worked. Thanks for your help

ullihaush said:
Hi Chef_Tony,
thanks for the fast respond.
The problem is still there. I can unhide it now, but when I tip on the unlock file, it says: Debug ERROR:
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed"
Do you have any idea?
done found the solution. Made new folder and it worked. Thanks for your help
Click to expand...
Click to collapse
Hi, do you remember what you did ? Which folder was made new?

SR-Schrauber said:
Hi, do you remember what you did ? Which folder was made new?
Click to expand...
Click to collapse
Just make a folder in the root of the device
"\programme\"
If I understand the fix correctly, this should solve your issues.

the problem with \programme\ and other localized names for the program files folder only affects the start menu links of the unlocker, but not repart doc. i suggested to re-download the repart doc, because there are different versions for each htc phone, and everytime you try a wrong version, it gives you that error, happened to me with several versions on the universal, before i gave up, because apparently, on the uni, the partitions can't be merged.
also, crc errors due to a faulty download or too much copying around the file could affect its functionality.
i wonder, why there is no mtty command for this entire action. i mean, a while back, my BA started behaving strangely, even after re-flashing and hard resetting, so i formatted the device using mtty, and it worked fine. then after flashing i realized, that the partitions were back to the stock settings 43mb storage, 16mb extrom. so mtty is not only capable of formatting, but also of re-partitioning.

Hi,
problem solved.
Just do what the different "How to´s" say and everything works fine.
I think my problem was that I made the wrong Hardreset after flashing.
It was not easy to push the 3 Buttons (Power, Camera, Rec) and the Stick in the Reset simultaniously.
TO READ IS SOMETIMES VERY USEFULL!
So thanks for help.

SR-Schrauber said:
Hi,
problem solved.
Just do what the different "How to´s" say and everything works fine.
I think my problem was that I made the wrong Hardreset after flashing.
It was not easy to push the 3 Buttons (Power, Camera, Rec) and the Stick in the Reset simultaniously.
TO READ IS SOMETIMES VERY USEFULL!
So thanks for help.
Click to expand...
Click to collapse
Hi Blue Angel specialists,
problem NOT solved! I still have only 43 MB and not 60 MB!
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" and I could not fix it.
I tried everything - two different WM 2003 ROMs - create new folders "Programme" "Programs" - test different .cab´s with the repart_doc inside - NOTHING happens.
Always the same error.
Does anyone have a good idea?
Thanks

SR-Schrauber said:
Hi Blue Angel specialists,
problem NOT solved! I still have only 43 MB and not 60 MB!
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" and I could not fix it.
I tried everything - two different WM 2003 ROMs - create new folders "Programme" "Programs" - test different .cab´s with the repart_doc inside - NOTHING happens.
Always the same error.
Does anyone have a good idea?
Thanks
Click to expand...
Click to collapse
At this point, I am not sure anymore. The unlock, repart procedure has always worked afaik. Can you flash an WWE rom on your BA? Is there a WWE version for your device? Check under xplode's signature as he has links to pretty much every shipped rom variant for the Blue Angel and see if you can get a WWE (0409). Then, simply flash it onto your device and try to do REPART again.

ok, let's go over this again:
if the unlocker works, there is no need to change the program files folder!
forget about the unlocker completely, your issue is in the repart_doc.
the repart_doc is not supposed to come as a cab! it is a simple exe file.
have you tried following my tutorial and using my tools, linked in the tutorial, like i told you before? that error usually means that you use a repart_doc not meant for this device.
and in german:
da der unlocker offensichtlich funktioniert hat und die beiden programme keinen zusammenhang haben, ist der programme ordner voellig uninteressant!
der unlocker kann komplett vergessen werden, dein problem liegt nur im repart_doc.
und die repart_doc sollte auch nicht als cab datei vorliegen, es muss nicht installiert werden sondern wird einfach als exe gestartet!
hast du mein tutorial aus der signatur befolgt, da sind die noetigen tools noch mal verlinkt und auch eine wm2003 rom mit meinem RUU, damit hat man keine probleme.
wie ich schon mal beschrieben habe, wenn DER fehler bei repart_doc kommt, hat man eine falsche version! wahrscheinlich fuer ein anderes geraet. dass es eine cab datei ist bestaetigt das. probiere es noch mal mit meiner repart_doc. es hat bei mir funktioniert und scheinbar auch bei den etwa 800 leuten, die die datei auch benutzt haben.
hier ist noch mal der direkte link zur richtigen funktionierenden repart_doc: http://tinyurl.com/yef8fmj
1. zip datei auspacken (kein passwort)
2. datei auf die sd karte kopieren
3. auf dem BA in den file explorer gehen, auf repart_doc klicken
4. sollte es nicht funktionieren repart_doc in \my documents\ kopieren.
5. noch mal ausfuehren
6. dann 128kb einstellen und mit dem normalen tutorial weitermachen

hi iv looked at wiki and still need help im running 2003se when i press sound + camera +reset nothing hapens any ideas just tmob flash screen and phone reloads need to get this baby modernized 6.1 or above could you advise on a full working rom

maxoutputuk said:
hi iv looked at wiki and still need help im running 2003se when i press sound + camera +reset nothing hapens any ideas just tmob flash screen and phone reloads need to get this baby modernized 6.1 or above could you advise on a full working rom
Click to expand...
Click to collapse
Best place to start out for upgrading your phone is here: http://forum.xda-developers.com/showthread.php?t=630416

When I turn on my phone to "press send to restore factory default ...". However, I can press what I want nothing happens. What is it? Please help me.
Wenn ich mein Handy einschalte kommt "Press send to restore factory default...". Ich kann jedoch drücken was ich will es passiert nichts. Was ist das?

Hello,
i can't update my Omnia 7 with "mi7rom_v1b Tango"-Rom.
If i try it via zune, is zune hanging hours over hours at the backup with 0%.
If i try it via Cab-Sender(Easy WP7 Update), i get the error that i dont have enough free memory on my phone, but i have more than 8gb of free space.
here is the (german) Log from Cab-Sender:
UpdateWP version 4.8.2345.0
Applying updates to device
Id: \\?\usb#vid_045e&pid_04ec&mi_00#7&41ad3d1&0&0000#{ca3d7387-f67b-11da-bbec-8000600fe800}
SN: 373b09ad - 54615dd6 - f14b9f69 - 7598ae94
Name: Telefonzelle
KITLName: QSD8XXX7F536755
Manufacturer: SAMSUNG
ModelId: 4
Model: OMNIA7
MobileOperator: 000-GB
Version: 07.10.08773.03-00.00.00000.00-00.00.00000.00
Der Status Ihre Telefons wird berprft.
Der Status Ihre Telefons wird berprft: Completed in 0,02 seconds
Systemanforderungen werden geprft.
Systemanforderungen werden geprft: Completed in 0,04 seconds
Updates werden heruntergeladen.
Updates werden heruntergeladen: 0%
Updates werden heruntergeladen: Completed in 5,09 seconds
Systemanforderungen werden geprft.
Systemanforderungen werden geprft: Completed in 0,02 seconds
Updates werden bertragen.
Updates werden bertragen: 0%
...
Updates werden bertragen: 100%
Updates werden bertragen: Completed in 8,63 seconds
Installation wird vorbereitet.
Installation wird vorbereitet: 0%
Installation wird vorbereitet: 24%
Installation wird vorbereitet: 44%
Installation wird vorbereitet: 50%
Installation wird vorbereitet: 58%
Installation wird vorbereitet: 68%
Installation wird vorbereitet: 76%
Installation wird vorbereitet: 84%
Installation wird vorbereitet: 88%
Installation wird vorbereitet: 88%
Installation wird vorbereitet: 94%
Installation wird vorbereitet: 94%
Installation wird vorbereitet: Completed in 24,12 seconds
Ihr Handy wird neu gestartet..
Ihr Handy wird neu gestartet: Completed in 174,06 seconds
Updates werden installiert.........
Updates werden installiert.: Completed in 194,21 seconds
Der Status Ihre Telefons wird berprft.
Der Status Ihre Telefons wird berprft: Completed in 0 seconds
Ihr Handy wird neu gestartet..
Ihr Handy wird neu gestartet: Completed in 250,33 seconds
Error:
Update device 373b09ad - 54615dd6 - f14b9f69 - 7598ae94 Complete with error code: 800705B4, error message: Timeout des Vorgangs. Es ist nicht genug Platz auf Ihrem Handy. Trennen Sie es, l”schen Sie den Verlauf von Internet Explorer Mobile, Maps und die Suche, und starten Sie dann das Update erneut.
Click to expand...
Click to collapse
I already flushed the cache.
Someone knows what is going wrong? Its the ROM out of this forum.

bLu3t0oth said:
Hello,
i can't update my Omnia 7 with "mi7rom_v1b Tango"-Rom.
If i try it via zune, is zune hanging hours over hours at the backup with 0%.
If i try it via Cab-Sender(Easy WP7 Update), i get the error that i dont have enough free memory on my phone, but i have more than 8gb of free space.
here is the (german) Log from Cab-Sender:
I already flushed the cache.
Someone knows what is going wrong? Its the ROM out of this forum.
Click to expand...
Click to collapse
I am also having a tonne of issues with this as well, I had the same error but in English, when I try and update from Zune, I get a different error about the phone unable to backup, I have a feeling that the phone is just having a lot of difficulty to adding files to the phone and copying files from the phone. Why would this be?

Hi there,
i just encrypted my newly formatted Note 2 and then rooted it.
im only at the password field it seems it don't accept my password.
Any tips and tricks to open my device?

now im recieving this message
versuchen sie es erneut. wenn sie noch 10 mal ein falsches passwort eingeben, werden alle daten im speicher des gerats geloscht
english:
try it again. when they enter another 10 times an incorrect password, all data in the memory will be erased

Hello guys,
today I would root my P8Lite.
-My Bootloader is already unlocked
I would begin and stuck my Phone into PC (I allowed Debugging), then I opened my recovery File with the windows shell and type this, but the problem is there came a error message.
PS C:\Users\Roni\Desktop\P8 Lite Root, Recovery\Recovery TWRP> adb devices
adb : Die Benennung "adb" wurde nicht als Name eines Cmdlet, einer Funktion, einer Skriptdatei oder eines ausführbaren
Programms erkannt. Überprüfen Sie die Schreibweise des Namens, oder ob der Pfad korrekt ist (sofern enthalten), und
wiederholen Sie den Vorgang.
In Zeile:1 Zeichen:1
+ adb devices
+ ~~~
+ CategoryInfo : ObjectNotFound: (adb:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
I dont know whats false, I really want to root my phone and put a new custom rom on it.:crying:
Hope you can help me
Roni

iTzRoni said:
Hello guys,
today I would root my P8Lite.
-My Bootloader is already unlocked
[....]
I dont know whats false, I really want to root my phone and put a new custom rom on it.:crying:
Hope you can help me
Roni
Click to expand...
Click to collapse
Try root with "Magisk".
I'll try myself today, should work for you too imho...
Just find a tutorial, push files on phone and follow the tut..!
Hope this might inspire you lightly..
GL

iTzRoni said:
Hello guys,
today I would root my P8Lite.
-My Bootloader is already unlocked
I would begin and stuck my Phone into PC (I allowed Debugging), then I opened my recovery File with the windows shell and type this, but the problem is there came a error message.
PS C:\Users\Roni\Desktop\P8 Lite Root, Recovery\Recovery TWRP> adb devices
adb : Die Benennung "adb" wurde nicht als Name eines Cmdlet, einer Funktion, einer Skriptdatei oder eines ausführbaren
Programms erkannt. Überprüfen Sie die Schreibweise des Namens, oder ob der Pfad korrekt ist (sofern enthalten), und
wiederholen Sie den Vorgang.
In Zeile:1 Zeichen:1
+ adb devices
+ ~~~
+ CategoryInfo : ObjectNotFound: (adb:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
I dont know whats false, I really want to root my phone and put a new custom rom on it.:crying:
Hope you can help me
Roni
Click to expand...
Click to collapse
If you are using windows 10 try to write it like this ./adb devices or .\adb devices
Can't read germany so no idea is it because of that