encryption and rooting - Galaxy Note II General

Hi there,
i just encrypted my newly formatted Note 2 and then rooted it.
im only at the password field it seems it don't accept my password.
Any tips and tricks to open my device?

now im recieving this message
versuchen sie es erneut. wenn sie noch 10 mal ein falsches passwort eingeben, werden alle daten im speicher des gerats geloscht
english:
try it again. when they enter another 10 times an incorrect password, all data in the memory will be erased

Related

Mda3 ext.rom

Hello,
on my Blue Angel is Windows 2003.
For upgrading to Mobile 6.1 I wanted to expand the memory like shown in the main thread from WIKI.
They say:
Install xda-developers_Unlocker.CAB by tapping on it in filemanger (from the directory where you put it earlier)
Then go to start -> Programs -> ExtROM tools -> then first run "unhide", then "Unlock".
I made it step by step.
When I now try to open the files unhide and unlock the MDA says, he does not find the files. In one thread they say, the solution is a special german cab.
Where can I find it or what else can I do to extend the memory?
Bye
ullihaush
the problem is that this unlocker installs itself to the standard program folder, which on an english rom would be "\program files\" but on a german rom it's "\programme\" but the shortcut on startmenu is written to \program files.
since you don't need any other program files anymore as you intend to flash it again anyway, you can simply rename the programme folder to program files or move the program on file explorer to the program files folder, so the startmenu short cuts can find the unlocker.
das problem ist, dass der unlocker in das standard verzeichnis fuer programme installiert wird, die startmenue eintraege aber eine genaue location haben, das heisst bei deiner deutschen rom landet der unlocker in \programme\ statt in \program files\ was allerdings der ort ist, wo die verknuepfungen im startmenue hinfuehren, da man die verknuepfungen nur schlecht aendern kann, empfehle ich dir, im datei explorer den ordner "programme" in "program files" umzubenennen, da du den eh nicht mehr brauchst, wenn du upgraden willst oder alternativ, verschiebe den unlocker in den ordner program files, bzw erstelle den, damit die startmenue eintraege halt auch wo hin fuehren, hatte das genau gleiche problem und habe mir damit beholfen, geht einfach schneller als ne andere cab rauszusuchen und zu installieren
leider immer noch nicht
Hi Chef_Tony,
thanks for the fast respond.
The problem is still there. I can unhide it now, but when I tip on the unlock file, it says: Debug ERROR:
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed"
Do you have any idea?
done found the solution. Made new folder and it worked. Thanks for your help
ullihaush said:
Hi Chef_Tony,
thanks for the fast respond.
The problem is still there. I can unhide it now, but when I tip on the unlock file, it says: Debug ERROR:
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed"
Do you have any idea?
done found the solution. Made new folder and it worked. Thanks for your help
Click to expand...
Click to collapse
Hi, do you remember what you did ? Which folder was made new?
SR-Schrauber said:
Hi, do you remember what you did ? Which folder was made new?
Click to expand...
Click to collapse
Just make a folder in the root of the device
"\programme\"
If I understand the fix correctly, this should solve your issues.
the problem with \programme\ and other localized names for the program files folder only affects the start menu links of the unlocker, but not repart doc. i suggested to re-download the repart doc, because there are different versions for each htc phone, and everytime you try a wrong version, it gives you that error, happened to me with several versions on the universal, before i gave up, because apparently, on the uni, the partitions can't be merged.
also, crc errors due to a faulty download or too much copying around the file could affect its functionality.
i wonder, why there is no mtty command for this entire action. i mean, a while back, my BA started behaving strangely, even after re-flashing and hard resetting, so i formatted the device using mtty, and it worked fine. then after flashing i realized, that the partitions were back to the stock settings 43mb storage, 16mb extrom. so mtty is not only capable of formatting, but also of re-partitioning.
Hi,
problem solved.
Just do what the different "How to´s" say and everything works fine.
I think my problem was that I made the wrong Hardreset after flashing.
It was not easy to push the 3 Buttons (Power, Camera, Rec) and the Stick in the Reset simultaniously.
TO READ IS SOMETIMES VERY USEFULL!
So thanks for help.
SR-Schrauber said:
Hi,
problem solved.
Just do what the different "How to´s" say and everything works fine.
I think my problem was that I made the wrong Hardreset after flashing.
It was not easy to push the 3 Buttons (Power, Camera, Rec) and the Stick in the Reset simultaniously.
TO READ IS SOMETIMES VERY USEFULL!
So thanks for help.
Click to expand...
Click to collapse
Hi Blue Angel specialists,
problem NOT solved! I still have only 43 MB and not 60 MB!
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" and I could not fix it.
I tried everything - two different WM 2003 ROMs - create new folders "Programme" "Programs" - test different .cab´s with the repart_doc inside - NOTHING happens.
Always the same error.
Does anyone have a good idea?
Thanks
SR-Schrauber said:
Hi Blue Angel specialists,
problem NOT solved! I still have only 43 MB and not 60 MB!
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" and I could not fix it.
I tried everything - two different WM 2003 ROMs - create new folders "Programme" "Programs" - test different .cab´s with the repart_doc inside - NOTHING happens.
Always the same error.
Does anyone have a good idea?
Thanks
Click to expand...
Click to collapse
At this point, I am not sure anymore. The unlock, repart procedure has always worked afaik. Can you flash an WWE rom on your BA? Is there a WWE version for your device? Check under xplode's signature as he has links to pretty much every shipped rom variant for the Blue Angel and see if you can get a WWE (0409). Then, simply flash it onto your device and try to do REPART again.
ok, let's go over this again:
if the unlocker works, there is no need to change the program files folder!
forget about the unlocker completely, your issue is in the repart_doc.
the repart_doc is not supposed to come as a cab! it is a simple exe file.
have you tried following my tutorial and using my tools, linked in the tutorial, like i told you before? that error usually means that you use a repart_doc not meant for this device.
and in german:
da der unlocker offensichtlich funktioniert hat und die beiden programme keinen zusammenhang haben, ist der programme ordner voellig uninteressant!
der unlocker kann komplett vergessen werden, dein problem liegt nur im repart_doc.
und die repart_doc sollte auch nicht als cab datei vorliegen, es muss nicht installiert werden sondern wird einfach als exe gestartet!
hast du mein tutorial aus der signatur befolgt, da sind die noetigen tools noch mal verlinkt und auch eine wm2003 rom mit meinem RUU, damit hat man keine probleme.
wie ich schon mal beschrieben habe, wenn DER fehler bei repart_doc kommt, hat man eine falsche version! wahrscheinlich fuer ein anderes geraet. dass es eine cab datei ist bestaetigt das. probiere es noch mal mit meiner repart_doc. es hat bei mir funktioniert und scheinbar auch bei den etwa 800 leuten, die die datei auch benutzt haben.
hier ist noch mal der direkte link zur richtigen funktionierenden repart_doc: http://tinyurl.com/yef8fmj
1. zip datei auspacken (kein passwort)
2. datei auf die sd karte kopieren
3. auf dem BA in den file explorer gehen, auf repart_doc klicken
4. sollte es nicht funktionieren repart_doc in \my documents\ kopieren.
5. noch mal ausfuehren
6. dann 128kb einstellen und mit dem normalen tutorial weitermachen
hi iv looked at wiki and still need help im running 2003se when i press sound + camera +reset nothing hapens any ideas just tmob flash screen and phone reloads need to get this baby modernized 6.1 or above could you advise on a full working rom
maxoutputuk said:
hi iv looked at wiki and still need help im running 2003se when i press sound + camera +reset nothing hapens any ideas just tmob flash screen and phone reloads need to get this baby modernized 6.1 or above could you advise on a full working rom
Click to expand...
Click to collapse
Best place to start out for upgrading your phone is here: http://forum.xda-developers.com/showthread.php?t=630416

Problem to turn on the phone.

When I turn on my phone to "press send to restore factory default ...". However, I can press what I want nothing happens. What is it? Please help me.
Wenn ich mein Handy einschalte kommt "Press send to restore factory default...". Ich kann jedoch drücken was ich will es passiert nichts. Was ist das?

Help needed: no syncronisation between outlook2007 an HD Touch on windows7/64

My motherlanguage is german, please excuse possible mistakes an wrong terms.
I am trying to connect the telefon to my computer. As mentioned above I use windows7/64, Outlook2007 both legal and updated, the ROM-version is 1.14.407.3. The only thridparty-software I use is a navigation-software.
Even within two hours telephonecall with the htc-hotline, Germany (wich is located in South England) we did not find the reason for this malfunction.
What we tried:
turned off all virusscanners, firewalls etc. We deactivated on the telephone side the acceleration-option in transferring data in active-sync.
Aswell a soft-reset did not bring any changes.
What I was able to recognise:
Not all the time I tried to connect the telephone to the computer the telephone reacted in the same way! From time to time it does nothing, usually it shows a message over minutes (!) that the telephone is 'connecting with the host'. Seldomn the telephone get's to the status that it is connected. Independend to this the computer shows in the devicemanager (not the mobile-devicecenter) a identified pocket PC and this should be without problems.
The mobile devicecenterr did only one time search for a device (but did not find it), in all other cases it did not even search it.
All the HTC-Hotline now whants me to do, is a hardreset, wich I would try to avoid: all my calendar-informations are now only on my telephone, without any backups!
Does anybody have a clou what I can do in this case?
I am really disapointed with all the problems I buyed with windows7 compared with my old XP!
Thank you in advance for any suggestions.
Yours
User from Bremen
Well I don't know how to solve your problem, but I'd make a backup with SK Tools, just to be on the save side if you're gonna make a hard reset...
For example, you can try:
http://www.s-k-tools.com/index.html?m_downloads.html#tools
And.. there are rumours that the mobile center is deleting informations on first connect..
Hallo User Bremen
Ich schreibe dir mal in Deutsch
Zunächst solltest du deine Daten einmal sichern!!!
Verwende dazu MyPhone - funktioniert recht gut. Die Daten werden auf einem Internetserver hinterlegt und lassen sich später wieder zurückspielen:
http ://myphone.microsoft.com/mkweb/Start.po?mkt=de-DE
Dort kannst du dir eine SMS mit dem Link an dein Phone senden lassen - dann kannst du das Programm per WLAN installieren.
Danach ist ein Zurücksetzen möglich.
Ich hatte auch das Problem - allerdings mit einem neuen ROM. Lies sich nicht lösen, erst als ich da ROM durch ein anderes ersetzt habe - dann ging es. es lag also nicht am PC (habe auch Win7).
Gruß Ralf
Try uninstalling W7 mobile device centre from your pc and reloading it. You may also want to try a different mini usb cable.
Are all your calender events and contacts saved on your computer? If so, they will load back on your phone if you lose them after a hard reset. You will however lose txt messages and some other stuff.
Good luck
selimgoeren said:
And.. there are rumours that the mobile center is deleting informations on first connect..
Click to expand...
Click to collapse
If you don't have the info in your outlook and you have "Replace items on device" set. It will sync your device to an empty outlook and delete all contacts, calenders etc.
@all
thank you for your help!
And sorry for responding so late, I thought I was sent an e-mail if posts are on this thread.
How can I recover this thread, if there is sent no link to it?
Topic:
What has happend meanwhile:
- changed the USB-cable
- made a soft reset
Both did not really changed anything.
What has happened:
- it still takes minutes to 'search for host'
- it still only sometimes shows the message that the mobile is connected to the host
- it twice connected teh mobile to the computer (WMDC identified my mobile with it's right name) and started to syncronise. After at least five minutes it suddenly broke the connection. The WMDC is not connected anymore.
What I will do:
- first of all I try tp back up my data and then think about updating to ROM...
I am so disappointed and hopeless at this time and I am so happy about any suggestions.
Ihr könnt Tipps gerne auf auch deutsch posten!

Update to 7.8 fails (error 800705B4)

Hello,
i can't update my Omnia 7 with "mi7rom_v1b Tango"-Rom.
If i try it via zune, is zune hanging hours over hours at the backup with 0%.
If i try it via Cab-Sender(Easy WP7 Update), i get the error that i dont have enough free memory on my phone, but i have more than 8gb of free space.
here is the (german) Log from Cab-Sender:
UpdateWP version 4.8.2345.0
Applying updates to device
Id: \\?\usb#vid_045e&pid_04ec&mi_00#7&41ad3d1&0&0000#{ca3d7387-f67b-11da-bbec-8000600fe800}
SN: 373b09ad - 54615dd6 - f14b9f69 - 7598ae94
Name: Telefonzelle
KITLName: QSD8XXX7F536755
Manufacturer: SAMSUNG
ModelId: 4
Model: OMNIA7
MobileOperator: 000-GB
Version: 07.10.08773.03-00.00.00000.00-00.00.00000.00
Der Status Ihre Telefons wird berprft.
Der Status Ihre Telefons wird berprft: Completed in 0,02 seconds
Systemanforderungen werden geprft.
Systemanforderungen werden geprft: Completed in 0,04 seconds
Updates werden heruntergeladen.
Updates werden heruntergeladen: 0%
Updates werden heruntergeladen: Completed in 5,09 seconds
Systemanforderungen werden geprft.
Systemanforderungen werden geprft: Completed in 0,02 seconds
Updates werden bertragen.
Updates werden bertragen: 0%
...
Updates werden bertragen: 100%
Updates werden bertragen: Completed in 8,63 seconds
Installation wird vorbereitet.
Installation wird vorbereitet: 0%
Installation wird vorbereitet: 24%
Installation wird vorbereitet: 44%
Installation wird vorbereitet: 50%
Installation wird vorbereitet: 58%
Installation wird vorbereitet: 68%
Installation wird vorbereitet: 76%
Installation wird vorbereitet: 84%
Installation wird vorbereitet: 88%
Installation wird vorbereitet: 88%
Installation wird vorbereitet: 94%
Installation wird vorbereitet: 94%
Installation wird vorbereitet: Completed in 24,12 seconds
Ihr Handy wird neu gestartet..
Ihr Handy wird neu gestartet: Completed in 174,06 seconds
Updates werden installiert.........
Updates werden installiert.: Completed in 194,21 seconds
Der Status Ihre Telefons wird berprft.
Der Status Ihre Telefons wird berprft: Completed in 0 seconds
Ihr Handy wird neu gestartet..
Ihr Handy wird neu gestartet: Completed in 250,33 seconds
Error:
Update device 373b09ad - 54615dd6 - f14b9f69 - 7598ae94 Complete with error code: 800705B4, error message: Timeout des Vorgangs. Es ist nicht genug Platz auf Ihrem Handy. Trennen Sie es, l”schen Sie den Verlauf von Internet Explorer Mobile, Maps und die Suche, und starten Sie dann das Update erneut.
Click to expand...
Click to collapse
I already flushed the cache.
Someone knows what is going wrong? Its the ROM out of this forum.
bLu3t0oth said:
Hello,
i can't update my Omnia 7 with "mi7rom_v1b Tango"-Rom.
If i try it via zune, is zune hanging hours over hours at the backup with 0%.
If i try it via Cab-Sender(Easy WP7 Update), i get the error that i dont have enough free memory on my phone, but i have more than 8gb of free space.
here is the (german) Log from Cab-Sender:
I already flushed the cache.
Someone knows what is going wrong? Its the ROM out of this forum.
Click to expand...
Click to collapse
I am also having a tonne of issues with this as well, I had the same error but in English, when I try and update from Zune, I get a different error about the phone unable to backup, I have a feeling that the phone is just having a lot of difficulty to adding files to the phone and copying files from the phone. Why would this be?

P8Lite Root/Flash Recovery TWRP (HELP)

Hello guys,
today I would root my P8Lite.
-My Bootloader is already unlocked
I would begin and stuck my Phone into PC (I allowed Debugging), then I opened my recovery File with the windows shell and type this, but the problem is there came a error message.
PS C:\Users\Roni\Desktop\P8 Lite Root, Recovery\Recovery TWRP> adb devices
adb : Die Benennung "adb" wurde nicht als Name eines Cmdlet, einer Funktion, einer Skriptdatei oder eines ausführbaren
Programms erkannt. Überprüfen Sie die Schreibweise des Namens, oder ob der Pfad korrekt ist (sofern enthalten), und
wiederholen Sie den Vorgang.
In Zeile:1 Zeichen:1
+ adb devices
+ ~~~
+ CategoryInfo : ObjectNotFound: (adb:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
I dont know whats false, I really want to root my phone and put a new custom rom on it.:crying:
Hope you can help me
Roni
iTzRoni said:
Hello guys,
today I would root my P8Lite.
-My Bootloader is already unlocked
[....]
I dont know whats false, I really want to root my phone and put a new custom rom on it.:crying:
Hope you can help me
Roni
Click to expand...
Click to collapse
Try root with "Magisk".
I'll try myself today, should work for you too imho...
Just find a tutorial, push files on phone and follow the tut..!
Hope this might inspire you lightly..
GL
iTzRoni said:
Hello guys,
today I would root my P8Lite.
-My Bootloader is already unlocked
I would begin and stuck my Phone into PC (I allowed Debugging), then I opened my recovery File with the windows shell and type this, but the problem is there came a error message.
PS C:\Users\Roni\Desktop\P8 Lite Root, Recovery\Recovery TWRP> adb devices
adb : Die Benennung "adb" wurde nicht als Name eines Cmdlet, einer Funktion, einer Skriptdatei oder eines ausführbaren
Programms erkannt. Überprüfen Sie die Schreibweise des Namens, oder ob der Pfad korrekt ist (sofern enthalten), und
wiederholen Sie den Vorgang.
In Zeile:1 Zeichen:1
+ adb devices
+ ~~~
+ CategoryInfo : ObjectNotFound: (adb:String) [], CommandNotFoundException
+ FullyQualifiedErrorId : CommandNotFoundException
I dont know whats false, I really want to root my phone and put a new custom rom on it.:crying:
Hope you can help me
Roni
Click to expand...
Click to collapse
If you are using windows 10 try to write it like this ./adb devices or .\adb devices
Can't read germany so no idea is it because of that

Categories

Resources