Hello,
on my Blue Angel is Windows 2003.
For upgrading to Mobile 6.1 I wanted to expand the memory like shown in the main thread from WIKI.
They say:
Install xda-developers_Unlocker.CAB by tapping on it in filemanger (from the directory where you put it earlier)
Then go to start -> Programs -> ExtROM tools -> then first run "unhide", then "Unlock".
I made it step by step.
When I now try to open the files unhide and unlock the MDA says, he does not find the files. In one thread they say, the solution is a special german cab.
Where can I find it or what else can I do to extend the memory?
Bye
ullihaush
the problem is that this unlocker installs itself to the standard program folder, which on an english rom would be "\program files\" but on a german rom it's "\programme\" but the shortcut on startmenu is written to \program files.
since you don't need any other program files anymore as you intend to flash it again anyway, you can simply rename the programme folder to program files or move the program on file explorer to the program files folder, so the startmenu short cuts can find the unlocker.
das problem ist, dass der unlocker in das standard verzeichnis fuer programme installiert wird, die startmenue eintraege aber eine genaue location haben, das heisst bei deiner deutschen rom landet der unlocker in \programme\ statt in \program files\ was allerdings der ort ist, wo die verknuepfungen im startmenue hinfuehren, da man die verknuepfungen nur schlecht aendern kann, empfehle ich dir, im datei explorer den ordner "programme" in "program files" umzubenennen, da du den eh nicht mehr brauchst, wenn du upgraden willst oder alternativ, verschiebe den unlocker in den ordner program files, bzw erstelle den, damit die startmenue eintraege halt auch wo hin fuehren, hatte das genau gleiche problem und habe mir damit beholfen, geht einfach schneller als ne andere cab rauszusuchen und zu installieren
leider immer noch nicht
Hi Chef_Tony,
thanks for the fast respond.
The problem is still there. I can unhide it now, but when I tip on the unlock file, it says: Debug ERROR:
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed"
Do you have any idea?
done found the solution. Made new folder and it worked. Thanks for your help
ullihaush said:
Hi Chef_Tony,
thanks for the fast respond.
The problem is still there. I can unhide it now, but when I tip on the unlock file, it says: Debug ERROR:
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed"
Do you have any idea?
done found the solution. Made new folder and it worked. Thanks for your help
Click to expand...
Click to collapse
Hi, do you remember what you did ? Which folder was made new?
SR-Schrauber said:
Hi, do you remember what you did ? Which folder was made new?
Click to expand...
Click to collapse
Just make a folder in the root of the device
"\programme\"
If I understand the fix correctly, this should solve your issues.
the problem with \programme\ and other localized names for the program files folder only affects the start menu links of the unlocker, but not repart doc. i suggested to re-download the repart doc, because there are different versions for each htc phone, and everytime you try a wrong version, it gives you that error, happened to me with several versions on the universal, before i gave up, because apparently, on the uni, the partitions can't be merged.
also, crc errors due to a faulty download or too much copying around the file could affect its functionality.
i wonder, why there is no mtty command for this entire action. i mean, a while back, my BA started behaving strangely, even after re-flashing and hard resetting, so i formatted the device using mtty, and it worked fine. then after flashing i realized, that the partitions were back to the stock settings 43mb storage, 16mb extrom. so mtty is not only capable of formatting, but also of re-partitioning.
Hi,
problem solved.
Just do what the different "How to´s" say and everything works fine.
I think my problem was that I made the wrong Hardreset after flashing.
It was not easy to push the 3 Buttons (Power, Camera, Rec) and the Stick in the Reset simultaniously.
TO READ IS SOMETIMES VERY USEFULL!
So thanks for help.
SR-Schrauber said:
Hi,
problem solved.
Just do what the different "How to´s" say and everything works fine.
I think my problem was that I made the wrong Hardreset after flashing.
It was not easy to push the 3 Buttons (Power, Camera, Rec) and the Stick in the Reset simultaniously.
TO READ IS SOMETIMES VERY USEFULL!
So thanks for help.
Click to expand...
Click to collapse
Hi Blue Angel specialists,
problem NOT solved! I still have only 43 MB and not 60 MB!
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" and I could not fix it.
I tried everything - two different WM 2003 ROMs - create new folders "Programme" "Programs" - test different .cab´s with the repart_doc inside - NOTHING happens.
Always the same error.
Does anyone have a good idea?
Thanks
SR-Schrauber said:
Hi Blue Angel specialists,
problem NOT solved! I still have only 43 MB and not 60 MB!
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" and I could not fix it.
I tried everything - two different WM 2003 ROMs - create new folders "Programme" "Programs" - test different .cab´s with the repart_doc inside - NOTHING happens.
Always the same error.
Does anyone have a good idea?
Thanks
Click to expand...
Click to collapse
At this point, I am not sure anymore. The unlock, repart procedure has always worked afaik. Can you flash an WWE rom on your BA? Is there a WWE version for your device? Check under xplode's signature as he has links to pretty much every shipped rom variant for the Blue Angel and see if you can get a WWE (0409). Then, simply flash it onto your device and try to do REPART again.
ok, let's go over this again:
if the unlocker works, there is no need to change the program files folder!
forget about the unlocker completely, your issue is in the repart_doc.
the repart_doc is not supposed to come as a cab! it is a simple exe file.
have you tried following my tutorial and using my tools, linked in the tutorial, like i told you before? that error usually means that you use a repart_doc not meant for this device.
and in german:
da der unlocker offensichtlich funktioniert hat und die beiden programme keinen zusammenhang haben, ist der programme ordner voellig uninteressant!
der unlocker kann komplett vergessen werden, dein problem liegt nur im repart_doc.
und die repart_doc sollte auch nicht als cab datei vorliegen, es muss nicht installiert werden sondern wird einfach als exe gestartet!
hast du mein tutorial aus der signatur befolgt, da sind die noetigen tools noch mal verlinkt und auch eine wm2003 rom mit meinem RUU, damit hat man keine probleme.
wie ich schon mal beschrieben habe, wenn DER fehler bei repart_doc kommt, hat man eine falsche version! wahrscheinlich fuer ein anderes geraet. dass es eine cab datei ist bestaetigt das. probiere es noch mal mit meiner repart_doc. es hat bei mir funktioniert und scheinbar auch bei den etwa 800 leuten, die die datei auch benutzt haben.
hier ist noch mal der direkte link zur richtigen funktionierenden repart_doc: http://tinyurl.com/yef8fmj
1. zip datei auspacken (kein passwort)
2. datei auf die sd karte kopieren
3. auf dem BA in den file explorer gehen, auf repart_doc klicken
4. sollte es nicht funktionieren repart_doc in \my documents\ kopieren.
5. noch mal ausfuehren
6. dann 128kb einstellen und mit dem normalen tutorial weitermachen
hi iv looked at wiki and still need help im running 2003se when i press sound + camera +reset nothing hapens any ideas just tmob flash screen and phone reloads need to get this baby modernized 6.1 or above could you advise on a full working rom
maxoutputuk said:
hi iv looked at wiki and still need help im running 2003se when i press sound + camera +reset nothing hapens any ideas just tmob flash screen and phone reloads need to get this baby modernized 6.1 or above could you advise on a full working rom
Click to expand...
Click to collapse
Best place to start out for upgrading your phone is here: http://forum.xda-developers.com/showthread.php?t=630416
Related
Hi,
this is about the VPA IV from Vodafone Germany.
I have hard resetted the device and that brought me deeper into trouble:
- Most of the Vodafon applications are gone, the neat SIM Manager, MIDLet Tool ...
- I can not install or run new programs. Most installations simply say "failed", Copied programs like SpAddCert do not start anymore. The erros message mentions that correct certificates are missed or parts of the program might not be installed correctly. Bull****. I figured out that there is a tool Default_Signed_DisableSecurity.CAB which might fix this issue, but I can not install it. Everything ran before I hard resetted the device.
Vodafone told me, I should request a Rom Update from Qtech.ch (I guess they meant Qtek.ch), however those people only provide roms for their own customers.
Can anybody help? The device is German and I would prefer to keep it that way.
Any help is appreciated!
The exact error message is:
Die Datei "SpAddCert" kann nicht geoeffnet werden. Es ist entweder nicht mit einem vertrauenswuerdigen Zertifikat signiert, oder eine ihre Komponenten kann nicht gefunden werden. Versuchen Sie die Datei neu zu installieren oder sie wiederherzustellen.
Re: Hard Reset changed security Settings, only MS Programs w
I continued investiagting this issue.
This seems not to be related to anything in Extended_Rom. If I rename to config file anything else, autorun does not do anything, anymore. So only the plain WM5 installation boots and will not get branded.
The support told me, that I'd better send the device in for an exchange.
Anything else I could do?
To sum the issue up:
- Some thread starts a few seconds after the device is booted. And it will change the security configuration in a way that the device does not allow to run even the shipped applications like Camera.exe
- this thread (or whatever) does not come out of the extended rom. If this is not executed the issue is present as well
- It will not be easy to update the rom. The update runs a small programm on the target device (as far as I know). This programm will not start, therefore the updating tool on XP says: Can not connect to device.
Hi, i had installed PC Anywhere Mobile from the Orig CD Symantec PC Anywhere 12.1. But (i don't know why) sometime i could it start anymore.
now if i want reinstall it, the HD tells me always
the installation has failed. the program or the setting could'nt installed, because of you has not the needed systemrights (in german
das programm oder die Einstellung konnte nicht installiert werden, da es/sie nicht die benötigte Systemberechtigung hat)
i have tryed it also after reset , but with no success.
how can i install ist anymore ?
When I turn on my phone to "press send to restore factory default ...". However, I can press what I want nothing happens. What is it? Please help me.
Wenn ich mein Handy einschalte kommt "Press send to restore factory default...". Ich kann jedoch drücken was ich will es passiert nichts. Was ist das?
My motherlanguage is german, please excuse possible mistakes an wrong terms.
I am trying to connect the telefon to my computer. As mentioned above I use windows7/64, Outlook2007 both legal and updated, the ROM-version is 1.14.407.3. The only thridparty-software I use is a navigation-software.
Even within two hours telephonecall with the htc-hotline, Germany (wich is located in South England) we did not find the reason for this malfunction.
What we tried:
turned off all virusscanners, firewalls etc. We deactivated on the telephone side the acceleration-option in transferring data in active-sync.
Aswell a soft-reset did not bring any changes.
What I was able to recognise:
Not all the time I tried to connect the telephone to the computer the telephone reacted in the same way! From time to time it does nothing, usually it shows a message over minutes (!) that the telephone is 'connecting with the host'. Seldomn the telephone get's to the status that it is connected. Independend to this the computer shows in the devicemanager (not the mobile-devicecenter) a identified pocket PC and this should be without problems.
The mobile devicecenterr did only one time search for a device (but did not find it), in all other cases it did not even search it.
All the HTC-Hotline now whants me to do, is a hardreset, wich I would try to avoid: all my calendar-informations are now only on my telephone, without any backups!
Does anybody have a clou what I can do in this case?
I am really disapointed with all the problems I buyed with windows7 compared with my old XP!
Thank you in advance for any suggestions.
Yours
User from Bremen
Well I don't know how to solve your problem, but I'd make a backup with SK Tools, just to be on the save side if you're gonna make a hard reset...
For example, you can try:
http://www.s-k-tools.com/index.html?m_downloads.html#tools
And.. there are rumours that the mobile center is deleting informations on first connect..
Hallo User Bremen
Ich schreibe dir mal in Deutsch
Zunächst solltest du deine Daten einmal sichern!!!
Verwende dazu MyPhone - funktioniert recht gut. Die Daten werden auf einem Internetserver hinterlegt und lassen sich später wieder zurückspielen:
http ://myphone.microsoft.com/mkweb/Start.po?mkt=de-DE
Dort kannst du dir eine SMS mit dem Link an dein Phone senden lassen - dann kannst du das Programm per WLAN installieren.
Danach ist ein Zurücksetzen möglich.
Ich hatte auch das Problem - allerdings mit einem neuen ROM. Lies sich nicht lösen, erst als ich da ROM durch ein anderes ersetzt habe - dann ging es. es lag also nicht am PC (habe auch Win7).
Gruß Ralf
Try uninstalling W7 mobile device centre from your pc and reloading it. You may also want to try a different mini usb cable.
Are all your calender events and contacts saved on your computer? If so, they will load back on your phone if you lose them after a hard reset. You will however lose txt messages and some other stuff.
Good luck
selimgoeren said:
And.. there are rumours that the mobile center is deleting informations on first connect..
Click to expand...
Click to collapse
If you don't have the info in your outlook and you have "Replace items on device" set. It will sync your device to an empty outlook and delete all contacts, calenders etc.
@all
thank you for your help!
And sorry for responding so late, I thought I was sent an e-mail if posts are on this thread.
How can I recover this thread, if there is sent no link to it?
Topic:
What has happend meanwhile:
- changed the USB-cable
- made a soft reset
Both did not really changed anything.
What has happened:
- it still takes minutes to 'search for host'
- it still only sometimes shows the message that the mobile is connected to the host
- it twice connected teh mobile to the computer (WMDC identified my mobile with it's right name) and started to syncronise. After at least five minutes it suddenly broke the connection. The WMDC is not connected anymore.
What I will do:
- first of all I try tp back up my data and then think about updating to ROM...
I am so disappointed and hopeless at this time and I am so happy about any suggestions.
Ihr könnt Tipps gerne auf auch deutsch posten!
Hi there,
i just encrypted my newly formatted Note 2 and then rooted it.
im only at the password field it seems it don't accept my password.
Any tips and tricks to open my device?
now im recieving this message
versuchen sie es erneut. wenn sie noch 10 mal ein falsches passwort eingeben, werden alle daten im speicher des gerats geloscht
english:
try it again. when they enter another 10 times an incorrect password, all data in the memory will be erased