I’m stuck with a minor problem and have spent more than a week trying to fix it. :?
STORY
To replace an O2 3.20 Eng on PCC 2002, I have cooked a French Rom based on 3.16 Qteck and included the freeware I liked, one of them being a freeware named POI (Point Of Interest) to be used with Tom-Tom Navigator.
ORIGINE
My problem is that I think, installing POI on ROM, was a silly choice of me as I cannot save any modified settings of POI such as setting for Speed cameras. :evil:
PROBLEMS
Pb N° 1. : I cannot save my POI settings. I get no really error messages, but all is gone next time I open it. Does any one have a clue?
PB N°2: As I had no clue, I decided to cook a French ROM without POI in it. But I failed to reinstall the newly cooked ROM after downloading the EXE file and running it, my PC opened DOS windows with an error message saying ERROR UNSUPORTED LANGUAGE ‘FRA’ prior to opening the Program A window. Then Program A gives me an Error 007 No Rom Image File … Cannot find ROM image to upgrade you Pocket PC.
PB N° 3: I decided to build an English ROM on 3.20 UK. as it seemed that French language may be the source of PB N°2. But after downloading it and running the exe file on my PC , a DOS windows opens and close then nothing would happened.
PB N°4: I decided to use XDAtools to flash my original XDA ROM (saved in the first place on my PC) back to my XDA, but XDAtools refuses to write to my XDA memory through Program A saying error opening c:\...\English\ for writing Access refused. Error opening the target device. “
I have no idea what XDATools tried to open so I cannot either go that root neither.
I now quite perplex on how to solve question N°1, or at best getting BP N°2 to work.
Any hint :?:
kommst Du ins Recovery? Dann brauchst Du ja keine RUU sondern nimmst das was auf Deiner internen Speicher ist ( ROM ) und spielst es wieder ein oder gar die Backup. LG
Gesendet von meinem Transformer Prime TF201 mit Tapatalk 2
Hello,
on my Blue Angel is Windows 2003.
For upgrading to Mobile 6.1 I wanted to expand the memory like shown in the main thread from WIKI.
They say:
Install xda-developers_Unlocker.CAB by tapping on it in filemanger (from the directory where you put it earlier)
Then go to start -> Programs -> ExtROM tools -> then first run "unhide", then "Unlock".
I made it step by step.
When I now try to open the files unhide and unlock the MDA says, he does not find the files. In one thread they say, the solution is a special german cab.
Where can I find it or what else can I do to extend the memory?
Bye
ullihaush
the problem is that this unlocker installs itself to the standard program folder, which on an english rom would be "\program files\" but on a german rom it's "\programme\" but the shortcut on startmenu is written to \program files.
since you don't need any other program files anymore as you intend to flash it again anyway, you can simply rename the programme folder to program files or move the program on file explorer to the program files folder, so the startmenu short cuts can find the unlocker.
das problem ist, dass der unlocker in das standard verzeichnis fuer programme installiert wird, die startmenue eintraege aber eine genaue location haben, das heisst bei deiner deutschen rom landet der unlocker in \programme\ statt in \program files\ was allerdings der ort ist, wo die verknuepfungen im startmenue hinfuehren, da man die verknuepfungen nur schlecht aendern kann, empfehle ich dir, im datei explorer den ordner "programme" in "program files" umzubenennen, da du den eh nicht mehr brauchst, wenn du upgraden willst oder alternativ, verschiebe den unlocker in den ordner program files, bzw erstelle den, damit die startmenue eintraege halt auch wo hin fuehren, hatte das genau gleiche problem und habe mir damit beholfen, geht einfach schneller als ne andere cab rauszusuchen und zu installieren
leider immer noch nicht
Hi Chef_Tony,
thanks for the fast respond.
The problem is still there. I can unhide it now, but when I tip on the unlock file, it says: Debug ERROR:
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed"
Do you have any idea?
done found the solution. Made new folder and it worked. Thanks for your help
ullihaush said:
Hi Chef_Tony,
thanks for the fast respond.
The problem is still there. I can unhide it now, but when I tip on the unlock file, it says: Debug ERROR:
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed"
Do you have any idea?
done found the solution. Made new folder and it worked. Thanks for your help
Click to expand...
Click to collapse
Hi, do you remember what you did ? Which folder was made new?
SR-Schrauber said:
Hi, do you remember what you did ? Which folder was made new?
Click to expand...
Click to collapse
Just make a folder in the root of the device
"\programme\"
If I understand the fix correctly, this should solve your issues.
the problem with \programme\ and other localized names for the program files folder only affects the start menu links of the unlocker, but not repart doc. i suggested to re-download the repart doc, because there are different versions for each htc phone, and everytime you try a wrong version, it gives you that error, happened to me with several versions on the universal, before i gave up, because apparently, on the uni, the partitions can't be merged.
also, crc errors due to a faulty download or too much copying around the file could affect its functionality.
i wonder, why there is no mtty command for this entire action. i mean, a while back, my BA started behaving strangely, even after re-flashing and hard resetting, so i formatted the device using mtty, and it worked fine. then after flashing i realized, that the partitions were back to the stock settings 43mb storage, 16mb extrom. so mtty is not only capable of formatting, but also of re-partitioning.
Hi,
problem solved.
Just do what the different "How to´s" say and everything works fine.
I think my problem was that I made the wrong Hardreset after flashing.
It was not easy to push the 3 Buttons (Power, Camera, Rec) and the Stick in the Reset simultaniously.
TO READ IS SOMETIMES VERY USEFULL!
So thanks for help.
SR-Schrauber said:
Hi,
problem solved.
Just do what the different "How to´s" say and everything works fine.
I think my problem was that I made the wrong Hardreset after flashing.
It was not easy to push the 3 Buttons (Power, Camera, Rec) and the Stick in the Reset simultaniously.
TO READ IS SOMETIMES VERY USEFULL!
So thanks for help.
Click to expand...
Click to collapse
Hi Blue Angel specialists,
problem NOT solved! I still have only 43 MB and not 60 MB!
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" and I could not fix it.
I tried everything - two different WM 2003 ROMs - create new folders "Programme" "Programs" - test different .cab´s with the repart_doc inside - NOTHING happens.
Always the same error.
Does anyone have a good idea?
Thanks
SR-Schrauber said:
Hi Blue Angel specialists,
problem NOT solved! I still have only 43 MB and not 60 MB!
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" and I could not fix it.
I tried everything - two different WM 2003 ROMs - create new folders "Programme" "Programs" - test different .cab´s with the repart_doc inside - NOTHING happens.
Always the same error.
Does anyone have a good idea?
Thanks
Click to expand...
Click to collapse
At this point, I am not sure anymore. The unlock, repart procedure has always worked afaik. Can you flash an WWE rom on your BA? Is there a WWE version for your device? Check under xplode's signature as he has links to pretty much every shipped rom variant for the Blue Angel and see if you can get a WWE (0409). Then, simply flash it onto your device and try to do REPART again.
ok, let's go over this again:
if the unlocker works, there is no need to change the program files folder!
forget about the unlocker completely, your issue is in the repart_doc.
the repart_doc is not supposed to come as a cab! it is a simple exe file.
have you tried following my tutorial and using my tools, linked in the tutorial, like i told you before? that error usually means that you use a repart_doc not meant for this device.
and in german:
da der unlocker offensichtlich funktioniert hat und die beiden programme keinen zusammenhang haben, ist der programme ordner voellig uninteressant!
der unlocker kann komplett vergessen werden, dein problem liegt nur im repart_doc.
und die repart_doc sollte auch nicht als cab datei vorliegen, es muss nicht installiert werden sondern wird einfach als exe gestartet!
hast du mein tutorial aus der signatur befolgt, da sind die noetigen tools noch mal verlinkt und auch eine wm2003 rom mit meinem RUU, damit hat man keine probleme.
wie ich schon mal beschrieben habe, wenn DER fehler bei repart_doc kommt, hat man eine falsche version! wahrscheinlich fuer ein anderes geraet. dass es eine cab datei ist bestaetigt das. probiere es noch mal mit meiner repart_doc. es hat bei mir funktioniert und scheinbar auch bei den etwa 800 leuten, die die datei auch benutzt haben.
hier ist noch mal der direkte link zur richtigen funktionierenden repart_doc: http://tinyurl.com/yef8fmj
1. zip datei auspacken (kein passwort)
2. datei auf die sd karte kopieren
3. auf dem BA in den file explorer gehen, auf repart_doc klicken
4. sollte es nicht funktionieren repart_doc in \my documents\ kopieren.
5. noch mal ausfuehren
6. dann 128kb einstellen und mit dem normalen tutorial weitermachen
hi iv looked at wiki and still need help im running 2003se when i press sound + camera +reset nothing hapens any ideas just tmob flash screen and phone reloads need to get this baby modernized 6.1 or above could you advise on a full working rom
maxoutputuk said:
hi iv looked at wiki and still need help im running 2003se when i press sound + camera +reset nothing hapens any ideas just tmob flash screen and phone reloads need to get this baby modernized 6.1 or above could you advise on a full working rom
Click to expand...
Click to collapse
Best place to start out for upgrading your phone is here: http://forum.xda-developers.com/showthread.php?t=630416
Hi, i had installed PC Anywhere Mobile from the Orig CD Symantec PC Anywhere 12.1. But (i don't know why) sometime i could it start anymore.
now if i want reinstall it, the HD tells me always
the installation has failed. the program or the setting could'nt installed, because of you has not the needed systemrights (in german
das programm oder die Einstellung konnte nicht installiert werden, da es/sie nicht die benötigte Systemberechtigung hat)
i have tryed it also after reset , but with no success.
how can i install ist anymore ?
Hi there!
I've just finished to switch to at least signed e-mails, or even encrypted one.
On my PC it works very nice (own Exchange, own PKI, therefore selfmade certificates). I can sign, encrypt and decrypt msges with outlook.
Now I try to get my xperia using this technology. I've exported my personal certificate under Vista, and imported it on my mobile device:
Xperia X1 wm6.1 pro build 19608.1.2.60
ROM-Version 1.03.207.12
Radio-Version 1.10.25.18
Of course active sync via ssl is already working, and it's pushing like a charm (exchange sp2...)
Now I am able to sign my outgoing email, from my xperia, and if I check the signed E-Mail (at the recipient side) the certificate has the correct S/N and is valid. So its definetly my certificate.
If I recieve a encrypted mail it says:
The msg could not be decrypted because you don't have the right certificate or smartcard on your device... WTF?????
(actually its german and says:
"Die Nachricht kann nicht entschlüsselt werden, da das Sicherheitszertifikat zum Entschlüsseln verschlüsselter E-Mails nicht auf dem Gerät vorhanden oder über eine SmartCard verfügbar ist."
I'm sure the Msg is encrypted with the right key, because i can open it on my Desktop. (exactly the same certs are installed, i compared the sn's of the certs)
I think the msg is bull**** and not correct. I was searching for a reason for some time, tried many different howtos (xpert xchange, some on this board... ALWAYS THE SAME SH...)
I need some help to get this to work, would be great if somebody could help me!
Best regards, have a nice day!
Win****
My motherlanguage is german, please excuse possible mistakes an wrong terms.
I am trying to connect the telefon to my computer. As mentioned above I use windows7/64, Outlook2007 both legal and updated, the ROM-version is 1.14.407.3. The only thridparty-software I use is a navigation-software.
Even within two hours telephonecall with the htc-hotline, Germany (wich is located in South England) we did not find the reason for this malfunction.
What we tried:
turned off all virusscanners, firewalls etc. We deactivated on the telephone side the acceleration-option in transferring data in active-sync.
Aswell a soft-reset did not bring any changes.
What I was able to recognise:
Not all the time I tried to connect the telephone to the computer the telephone reacted in the same way! From time to time it does nothing, usually it shows a message over minutes (!) that the telephone is 'connecting with the host'. Seldomn the telephone get's to the status that it is connected. Independend to this the computer shows in the devicemanager (not the mobile-devicecenter) a identified pocket PC and this should be without problems.
The mobile devicecenterr did only one time search for a device (but did not find it), in all other cases it did not even search it.
All the HTC-Hotline now whants me to do, is a hardreset, wich I would try to avoid: all my calendar-informations are now only on my telephone, without any backups!
Does anybody have a clou what I can do in this case?
I am really disapointed with all the problems I buyed with windows7 compared with my old XP!
Thank you in advance for any suggestions.
Yours
User from Bremen
Well I don't know how to solve your problem, but I'd make a backup with SK Tools, just to be on the save side if you're gonna make a hard reset...
For example, you can try:
http://www.s-k-tools.com/index.html?m_downloads.html#tools
And.. there are rumours that the mobile center is deleting informations on first connect..
Hallo User Bremen
Ich schreibe dir mal in Deutsch
Zunächst solltest du deine Daten einmal sichern!!!
Verwende dazu MyPhone - funktioniert recht gut. Die Daten werden auf einem Internetserver hinterlegt und lassen sich später wieder zurückspielen:
http ://myphone.microsoft.com/mkweb/Start.po?mkt=de-DE
Dort kannst du dir eine SMS mit dem Link an dein Phone senden lassen - dann kannst du das Programm per WLAN installieren.
Danach ist ein Zurücksetzen möglich.
Ich hatte auch das Problem - allerdings mit einem neuen ROM. Lies sich nicht lösen, erst als ich da ROM durch ein anderes ersetzt habe - dann ging es. es lag also nicht am PC (habe auch Win7).
Gruß Ralf
Try uninstalling W7 mobile device centre from your pc and reloading it. You may also want to try a different mini usb cable.
Are all your calender events and contacts saved on your computer? If so, they will load back on your phone if you lose them after a hard reset. You will however lose txt messages and some other stuff.
Good luck
selimgoeren said:
And.. there are rumours that the mobile center is deleting informations on first connect..
Click to expand...
Click to collapse
If you don't have the info in your outlook and you have "Replace items on device" set. It will sync your device to an empty outlook and delete all contacts, calenders etc.
@all
thank you for your help!
And sorry for responding so late, I thought I was sent an e-mail if posts are on this thread.
How can I recover this thread, if there is sent no link to it?
Topic:
What has happend meanwhile:
- changed the USB-cable
- made a soft reset
Both did not really changed anything.
What has happened:
- it still takes minutes to 'search for host'
- it still only sometimes shows the message that the mobile is connected to the host
- it twice connected teh mobile to the computer (WMDC identified my mobile with it's right name) and started to syncronise. After at least five minutes it suddenly broke the connection. The WMDC is not connected anymore.
What I will do:
- first of all I try tp back up my data and then think about updating to ROM...
I am so disappointed and hopeless at this time and I am so happy about any suggestions.
Ihr könnt Tipps gerne auf auch deutsch posten!