Sticky French ROM. - MDA, XDA, 1010 Software Upgrading

I’m stuck with a minor problem and have spent more than a week trying to fix it. :?
STORY
To replace an O2 3.20 Eng on PCC 2002, I have cooked a French Rom based on 3.16 Qteck and included the freeware I liked, one of them being a freeware named POI (Point Of Interest) to be used with Tom-Tom Navigator.
ORIGINE
My problem is that I think, installing POI on ROM, was a silly choice of me as I cannot save any modified settings of POI such as setting for Speed cameras. :evil:
PROBLEMS
Pb N° 1. : I cannot save my POI settings. I get no really error messages, but all is gone next time I open it. Does any one have a clue?
PB N°2: As I had no clue, I decided to cook a French ROM without POI in it. But I failed to reinstall the newly cooked ROM after downloading the EXE file and running it, my PC opened DOS windows with an error message saying ERROR UNSUPORTED LANGUAGE ‘FRA’ prior to opening the Program A window. Then Program A gives me an Error 007 No Rom Image File … Cannot find ROM image to upgrade you Pocket PC.
PB N° 3: I decided to build an English ROM on 3.20 UK. as it seemed that French language may be the source of PB N°2. But after downloading it and running the exe file on my PC , a DOS windows opens and close then nothing would happened.
PB N°4: I decided to use XDAtools to flash my original XDA ROM (saved in the first place on my PC) back to my XDA, but XDAtools refuses to write to my XDA memory through Program A saying error opening c:\...\English\ for writing Access refused. Error opening the target device. “
I have no idea what XDATools tried to open so I cannot either go that root neither.
I now quite perplex on how to solve question N°1, or at best getting BP N°2 to work.
Any hint :?:

kommst Du ins Recovery? Dann brauchst Du ja keine RUU sondern nimmst das was auf Deiner internen Speicher ist ( ROM ) und spielst es wieder ein oder gar die Backup. LG
Gesendet von meinem Transformer Prime TF201 mit Tapatalk 2

Related

Sticky French ROM.

I’m stuck with a minor problem and have spent more than a week trying to fix it. :?
STORY
To replace an O2 3.20 Eng on PCC 2002, I have cooked a French Rom based on 3.16 Qteck and included the freeware I liked, one of them being a freeware named POI (Point Of Interest) to be used with Tom-Tom Navigator.
ORIGINE
My problem is that I think, installing POI on ROM, was a silly choice of me as I cannot save any modified settings of POI such as setting for Speed cameras. :evil:
PROBLEMS
Pb N° 1. : I cannot save my POI settings. I get no really error messages, but all is gone next time I open it. Does any one have a clue?
PB N°2: As I had no clue, I decided to cook a French ROM without POI in it. But I failed to reinstall the newly cooked ROM after downloading the EXE file and running it, my PC opened DOS windows with an error message saying ERROR UNSUPORTED LANGUAGE ‘FRA’ prior to opening the Program A window. Then Program A gives me an Error 007 No Rom Image File … Cannot find ROM image to upgrade you Pocket PC.
PB N° 3: I decided to build an English ROM on 3.20 UK. as it seemed that French language may be the source of PB N°2. But after downloading it and running the exe file on my PC , a DOS windows opens and close then nothing would happened.
PB N°4: I decided to use XDAtools to flash my original XDA ROM (saved in the first place on my PC) back to my XDA, but XDAtools refuses to write to my XDA memory through Program A saying error opening c:\...\English\ for writing Access refused. Error opening the target device. “
I have no idea what XDATools tried to open so I cannot either go that root neither.
I now quite perplex on how to solve question N°1, or at best getting BP N°2 to work.
Any hint :?:

Hard Reset changed security Settings, only MS Programs work

Hi,
this is about the VPA IV from Vodafone Germany.
I have hard resetted the device and that brought me deeper into trouble:
- Most of the Vodafon applications are gone, the neat SIM Manager, MIDLet Tool ...
- I can not install or run new programs. Most installations simply say "failed", Copied programs like SpAddCert do not start anymore. The erros message mentions that correct certificates are missed or parts of the program might not be installed correctly. Bull****. I figured out that there is a tool Default_Signed_DisableSecurity.CAB which might fix this issue, but I can not install it. Everything ran before I hard resetted the device.
Vodafone told me, I should request a Rom Update from Qtech.ch (I guess they meant Qtek.ch), however those people only provide roms for their own customers.
Can anybody help? The device is German and I would prefer to keep it that way.
Any help is appreciated!
The exact error message is:
Die Datei "SpAddCert" kann nicht geoeffnet werden. Es ist entweder nicht mit einem vertrauenswuerdigen Zertifikat signiert, oder eine ihre Komponenten kann nicht gefunden werden. Versuchen Sie die Datei neu zu installieren oder sie wiederherzustellen.
Re: Hard Reset changed security Settings, only MS Programs w
I continued investiagting this issue.
This seems not to be related to anything in Extended_Rom. If I rename to config file anything else, autorun does not do anything, anymore. So only the plain WM5 installation boots and will not get branded.
The support told me, that I'd better send the device in for an exchange.
Anything else I could do?
To sum the issue up:
- Some thread starts a few seconds after the device is booted. And it will change the security configuration in a way that the device does not allow to run even the shipped applications like Camera.exe
- this thread (or whatever) does not come out of the extended rom. If this is not executed the issue is present as well
- It will not be easy to update the rom. The update runs a small programm on the target device (as far as I know). This programm will not start, therefore the updating tool on XP says: Can not connect to device.

Mda3 ext.rom

Hello,
on my Blue Angel is Windows 2003.
For upgrading to Mobile 6.1 I wanted to expand the memory like shown in the main thread from WIKI.
They say:
Install xda-developers_Unlocker.CAB by tapping on it in filemanger (from the directory where you put it earlier)
Then go to start -> Programs -> ExtROM tools -> then first run "unhide", then "Unlock".
I made it step by step.
When I now try to open the files unhide and unlock the MDA says, he does not find the files. In one thread they say, the solution is a special german cab.
Where can I find it or what else can I do to extend the memory?
Bye
ullihaush
the problem is that this unlocker installs itself to the standard program folder, which on an english rom would be "\program files\" but on a german rom it's "\programme\" but the shortcut on startmenu is written to \program files.
since you don't need any other program files anymore as you intend to flash it again anyway, you can simply rename the programme folder to program files or move the program on file explorer to the program files folder, so the startmenu short cuts can find the unlocker.
das problem ist, dass der unlocker in das standard verzeichnis fuer programme installiert wird, die startmenue eintraege aber eine genaue location haben, das heisst bei deiner deutschen rom landet der unlocker in \programme\ statt in \program files\ was allerdings der ort ist, wo die verknuepfungen im startmenue hinfuehren, da man die verknuepfungen nur schlecht aendern kann, empfehle ich dir, im datei explorer den ordner "programme" in "program files" umzubenennen, da du den eh nicht mehr brauchst, wenn du upgraden willst oder alternativ, verschiebe den unlocker in den ordner program files, bzw erstelle den, damit die startmenue eintraege halt auch wo hin fuehren, hatte das genau gleiche problem und habe mir damit beholfen, geht einfach schneller als ne andere cab rauszusuchen und zu installieren
leider immer noch nicht
Hi Chef_Tony,
thanks for the fast respond.
The problem is still there. I can unhide it now, but when I tip on the unlock file, it says: Debug ERROR:
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed"
Do you have any idea?
done found the solution. Made new folder and it worked. Thanks for your help
ullihaush said:
Hi Chef_Tony,
thanks for the fast respond.
The problem is still there. I can unhide it now, but when I tip on the unlock file, it says: Debug ERROR:
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed"
Do you have any idea?
done found the solution. Made new folder and it worked. Thanks for your help
Click to expand...
Click to collapse
Hi, do you remember what you did ? Which folder was made new?
SR-Schrauber said:
Hi, do you remember what you did ? Which folder was made new?
Click to expand...
Click to collapse
Just make a folder in the root of the device
"\programme\"
If I understand the fix correctly, this should solve your issues.
the problem with \programme\ and other localized names for the program files folder only affects the start menu links of the unlocker, but not repart doc. i suggested to re-download the repart doc, because there are different versions for each htc phone, and everytime you try a wrong version, it gives you that error, happened to me with several versions on the universal, before i gave up, because apparently, on the uni, the partitions can't be merged.
also, crc errors due to a faulty download or too much copying around the file could affect its functionality.
i wonder, why there is no mtty command for this entire action. i mean, a while back, my BA started behaving strangely, even after re-flashing and hard resetting, so i formatted the device using mtty, and it worked fine. then after flashing i realized, that the partitions were back to the stock settings 43mb storage, 16mb extrom. so mtty is not only capable of formatting, but also of re-partitioning.
Hi,
problem solved.
Just do what the different "How to´s" say and everything works fine.
I think my problem was that I made the wrong Hardreset after flashing.
It was not easy to push the 3 Buttons (Power, Camera, Rec) and the Stick in the Reset simultaniously.
TO READ IS SOMETIMES VERY USEFULL!
So thanks for help.
SR-Schrauber said:
Hi,
problem solved.
Just do what the different "How to´s" say and everything works fine.
I think my problem was that I made the wrong Hardreset after flashing.
It was not easy to push the 3 Buttons (Power, Camera, Rec) and the Stick in the Reset simultaniously.
TO READ IS SOMETIMES VERY USEFULL!
So thanks for help.
Click to expand...
Click to collapse
Hi Blue Angel specialists,
problem NOT solved! I still have only 43 MB and not 60 MB!
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" and I could not fix it.
I tried everything - two different WM 2003 ROMs - create new folders "Programme" "Programs" - test different .cab´s with the repart_doc inside - NOTHING happens.
Always the same error.
Does anyone have a good idea?
Thanks
SR-Schrauber said:
Hi Blue Angel specialists,
problem NOT solved! I still have only 43 MB and not 60 MB!
When I run the DEPART_doc, it says:
"FL_IOCTL_FORMAT_PHYSICAL_DRIVE failed" and I could not fix it.
I tried everything - two different WM 2003 ROMs - create new folders "Programme" "Programs" - test different .cab´s with the repart_doc inside - NOTHING happens.
Always the same error.
Does anyone have a good idea?
Thanks
Click to expand...
Click to collapse
At this point, I am not sure anymore. The unlock, repart procedure has always worked afaik. Can you flash an WWE rom on your BA? Is there a WWE version for your device? Check under xplode's signature as he has links to pretty much every shipped rom variant for the Blue Angel and see if you can get a WWE (0409). Then, simply flash it onto your device and try to do REPART again.
ok, let's go over this again:
if the unlocker works, there is no need to change the program files folder!
forget about the unlocker completely, your issue is in the repart_doc.
the repart_doc is not supposed to come as a cab! it is a simple exe file.
have you tried following my tutorial and using my tools, linked in the tutorial, like i told you before? that error usually means that you use a repart_doc not meant for this device.
and in german:
da der unlocker offensichtlich funktioniert hat und die beiden programme keinen zusammenhang haben, ist der programme ordner voellig uninteressant!
der unlocker kann komplett vergessen werden, dein problem liegt nur im repart_doc.
und die repart_doc sollte auch nicht als cab datei vorliegen, es muss nicht installiert werden sondern wird einfach als exe gestartet!
hast du mein tutorial aus der signatur befolgt, da sind die noetigen tools noch mal verlinkt und auch eine wm2003 rom mit meinem RUU, damit hat man keine probleme.
wie ich schon mal beschrieben habe, wenn DER fehler bei repart_doc kommt, hat man eine falsche version! wahrscheinlich fuer ein anderes geraet. dass es eine cab datei ist bestaetigt das. probiere es noch mal mit meiner repart_doc. es hat bei mir funktioniert und scheinbar auch bei den etwa 800 leuten, die die datei auch benutzt haben.
hier ist noch mal der direkte link zur richtigen funktionierenden repart_doc: http://tinyurl.com/yef8fmj
1. zip datei auspacken (kein passwort)
2. datei auf die sd karte kopieren
3. auf dem BA in den file explorer gehen, auf repart_doc klicken
4. sollte es nicht funktionieren repart_doc in \my documents\ kopieren.
5. noch mal ausfuehren
6. dann 128kb einstellen und mit dem normalen tutorial weitermachen
hi iv looked at wiki and still need help im running 2003se when i press sound + camera +reset nothing hapens any ideas just tmob flash screen and phone reloads need to get this baby modernized 6.1 or above could you advise on a full working rom
maxoutputuk said:
hi iv looked at wiki and still need help im running 2003se when i press sound + camera +reset nothing hapens any ideas just tmob flash screen and phone reloads need to get this baby modernized 6.1 or above could you advise on a full working rom
Click to expand...
Click to collapse
Best place to start out for upgrading your phone is here: http://forum.xda-developers.com/showthread.php?t=630416

PC Anywhere Mobile

Hi, i had installed PC Anywhere Mobile from the Orig CD Symantec PC Anywhere 12.1. But (i don't know why) sometime i could it start anymore.
now if i want reinstall it, the HD tells me always
the installation has failed. the program or the setting could'nt installed, because of you has not the needed systemrights (in german
das programm oder die Einstellung konnte nicht installiert werden, da es/sie nicht die benötigte Systemberechtigung hat)
i have tryed it also after reset , but with no success.
how can i install ist anymore ?

win7 PNRP error - cannot connect BT or USB

after I recovered my XDA and did a restore I cannot enter ACTIVESync anymore. Neither USB nor Bluetooth :-(
Windows-Systemprotocoll tells me that there is an error with the PNRP service.
on USB the following error occurs, its in german, but translated:
[Die Peer Name Resolution-Protokoll-Cloud wurde nicht gestartet. Fehler bei Standardidentität. Fehlercode: 0x80630801.]
"the PNRP cloud could not be started. Error in standard-identity. Errorcode 0x80630801"
--
the xda shows a errror window POCKET PC NETWORKING "cannot obtain a server-assigned IP address. Try again later or enter an IP address in Network settings"
--
Der Dienst "Peer Name Resolution-Protokoll" wurde mit folgendem Fehler beendet: %%-2140993535
"the service PNRP-Protokoll terminated due to following error %%-2140993535"
--
Der Dienst "Peernetzwerk-Gruppenzuordnung" ist vom Dienst "Peer Name Resolution-Protokoll" abhängig, der aufgrund folgenden Fehlers nicht gestartet wurde: %%-2140993535
says that service "group-assignment" is terminated due to dependecy to PNRP-Protokoll service which could not be started due to error %%-2140993535
update:
managed BT by deleting connection in ACTIVE-SYNC settings in XDA
and re-initiating connection.
So far so good
Flash Lite 3.0 application cab file cration using the visual studio2005
Hello friends,
i am flash developer i need to create the CAB file of Flashlite application.
I have created the flashlite 3.0 application.
i want to create the CAB file of this application for WM5.0.
its reallty helpful if anyone provides details how to create the flash lite application CAB file using .NET.
Thanks in advance
Looking for positive reply.
Flashlite CAB file cration uisng 2005 .NET
hi all,
Please let me know how to create the CAb of Flash lite application
uisng .NET(Visual studio 2005)

Categories

Resources