win7 PNRP error - cannot connect BT or USB - Networking

after I recovered my XDA and did a restore I cannot enter ACTIVESync anymore. Neither USB nor Bluetooth :-(
Windows-Systemprotocoll tells me that there is an error with the PNRP service.
on USB the following error occurs, its in german, but translated:
[Die Peer Name Resolution-Protokoll-Cloud wurde nicht gestartet. Fehler bei Standardidentität. Fehlercode: 0x80630801.]
"the PNRP cloud could not be started. Error in standard-identity. Errorcode 0x80630801"
--
the xda shows a errror window POCKET PC NETWORKING "cannot obtain a server-assigned IP address. Try again later or enter an IP address in Network settings"
--
Der Dienst "Peer Name Resolution-Protokoll" wurde mit folgendem Fehler beendet: %%-2140993535
"the service PNRP-Protokoll terminated due to following error %%-2140993535"
--
Der Dienst "Peernetzwerk-Gruppenzuordnung" ist vom Dienst "Peer Name Resolution-Protokoll" abhängig, der aufgrund folgenden Fehlers nicht gestartet wurde: %%-2140993535
says that service "group-assignment" is terminated due to dependecy to PNRP-Protokoll service which could not be started due to error %%-2140993535

update:
managed BT by deleting connection in ACTIVE-SYNC settings in XDA
and re-initiating connection.
So far so good

Flash Lite 3.0 application cab file cration using the visual studio2005
Hello friends,
i am flash developer i need to create the CAB file of Flashlite application.
I have created the flashlite 3.0 application.
i want to create the CAB file of this application for WM5.0.
its reallty helpful if anyone provides details how to create the flash lite application CAB file using .NET.
Thanks in advance
Looking for positive reply.

Flashlite CAB file cration uisng 2005 .NET
hi all,
Please let me know how to create the CAb of Flash lite application
uisng .NET(Visual studio 2005)

Related

Sticky French ROM.

I’m stuck with a minor problem and have spent more than a week trying to fix it. :?
STORY
To replace an O2 3.20 Eng on PCC 2002, I have cooked a French Rom based on 3.16 Qteck and included the freeware I liked, one of them being a freeware named POI (Point Of Interest) to be used with Tom-Tom Navigator.
ORIGINE
My problem is that I think, installing POI on ROM, was a silly choice of me as I cannot save any modified settings of POI such as setting for Speed cameras. :evil:
PROBLEMS
Pb N° 1. : I cannot save my POI settings. I get no really error messages, but all is gone next time I open it. Does any one have a clue?
PB N°2: As I had no clue, I decided to cook a French ROM without POI in it. But I failed to reinstall the newly cooked ROM after downloading the EXE file and running it, my PC opened DOS windows with an error message saying ERROR UNSUPORTED LANGUAGE ‘FRA’ prior to opening the Program A window. Then Program A gives me an Error 007 No Rom Image File … Cannot find ROM image to upgrade you Pocket PC.
PB N° 3: I decided to build an English ROM on 3.20 UK. as it seemed that French language may be the source of PB N°2. But after downloading it and running the exe file on my PC , a DOS windows opens and close then nothing would happened.
PB N°4: I decided to use XDAtools to flash my original XDA ROM (saved in the first place on my PC) back to my XDA, but XDAtools refuses to write to my XDA memory through Program A saying error opening c:\...\English\ for writing Access refused. Error opening the target device. “
I have no idea what XDATools tried to open so I cannot either go that root neither.
I now quite perplex on how to solve question N°1, or at best getting BP N°2 to work.
Any hint :?:
kommst Du ins Recovery? Dann brauchst Du ja keine RUU sondern nimmst das was auf Deiner internen Speicher ist ( ROM ) und spielst es wieder ein oder gar die Backup. LG
Gesendet von meinem Transformer Prime TF201 mit Tapatalk 2

Hard Reset changed security Settings, only MS Programs work

Hi,
this is about the VPA IV from Vodafone Germany.
I have hard resetted the device and that brought me deeper into trouble:
- Most of the Vodafon applications are gone, the neat SIM Manager, MIDLet Tool ...
- I can not install or run new programs. Most installations simply say "failed", Copied programs like SpAddCert do not start anymore. The erros message mentions that correct certificates are missed or parts of the program might not be installed correctly. Bull****. I figured out that there is a tool Default_Signed_DisableSecurity.CAB which might fix this issue, but I can not install it. Everything ran before I hard resetted the device.
Vodafone told me, I should request a Rom Update from Qtech.ch (I guess they meant Qtek.ch), however those people only provide roms for their own customers.
Can anybody help? The device is German and I would prefer to keep it that way.
Any help is appreciated!
The exact error message is:
Die Datei "SpAddCert" kann nicht geoeffnet werden. Es ist entweder nicht mit einem vertrauenswuerdigen Zertifikat signiert, oder eine ihre Komponenten kann nicht gefunden werden. Versuchen Sie die Datei neu zu installieren oder sie wiederherzustellen.
Re: Hard Reset changed security Settings, only MS Programs w
I continued investiagting this issue.
This seems not to be related to anything in Extended_Rom. If I rename to config file anything else, autorun does not do anything, anymore. So only the plain WM5 installation boots and will not get branded.
The support told me, that I'd better send the device in for an exchange.
Anything else I could do?
To sum the issue up:
- Some thread starts a few seconds after the device is booted. And it will change the security configuration in a way that the device does not allow to run even the shipped applications like Camera.exe
- this thread (or whatever) does not come out of the extended rom. If this is not executed the issue is present as well
- It will not be easy to update the rom. The update runs a small programm on the target device (as far as I know). This programm will not start, therefore the updating tool on XP says: Can not connect to device.

PC Anywhere Mobile

Hi, i had installed PC Anywhere Mobile from the Orig CD Symantec PC Anywhere 12.1. But (i don't know why) sometime i could it start anymore.
now if i want reinstall it, the HD tells me always
the installation has failed. the program or the setting could'nt installed, because of you has not the needed systemrights (in german
das programm oder die Einstellung konnte nicht installiert werden, da es/sie nicht die benötigte Systemberechtigung hat)
i have tryed it also after reset , but with no success.
how can i install ist anymore ?

need help with S/MIME encrypted e-mail

Hi there!
I've just finished to switch to at least signed e-mails, or even encrypted one.
On my PC it works very nice (own Exchange, own PKI, therefore selfmade certificates). I can sign, encrypt and decrypt msges with outlook.
Now I try to get my xperia using this technology. I've exported my personal certificate under Vista, and imported it on my mobile device:
Xperia X1 wm6.1 pro build 19608.1.2.60
ROM-Version 1.03.207.12
Radio-Version 1.10.25.18
Of course active sync via ssl is already working, and it's pushing like a charm (exchange sp2...)
Now I am able to sign my outgoing email, from my xperia, and if I check the signed E-Mail (at the recipient side) the certificate has the correct S/N and is valid. So its definetly my certificate.
If I recieve a encrypted mail it says:
The msg could not be decrypted because you don't have the right certificate or smartcard on your device... WTF?????
(actually its german and says:
"Die Nachricht kann nicht entschlüsselt werden, da das Sicherheitszertifikat zum Entschlüsseln verschlüsselter E-Mails nicht auf dem Gerät vorhanden oder über eine SmartCard verfügbar ist."
I'm sure the Msg is encrypted with the right key, because i can open it on my Desktop. (exactly the same certs are installed, i compared the sn's of the certs)
I think the msg is bull**** and not correct. I was searching for a reason for some time, tried many different howtos (xpert xchange, some on this board... ALWAYS THE SAME SH...)
I need some help to get this to work, would be great if somebody could help me!
Best regards, have a nice day!
Win****

Help needed: no syncronisation between outlook2007 an HD Touch on windows7/64

My motherlanguage is german, please excuse possible mistakes an wrong terms.
I am trying to connect the telefon to my computer. As mentioned above I use windows7/64, Outlook2007 both legal and updated, the ROM-version is 1.14.407.3. The only thridparty-software I use is a navigation-software.
Even within two hours telephonecall with the htc-hotline, Germany (wich is located in South England) we did not find the reason for this malfunction.
What we tried:
turned off all virusscanners, firewalls etc. We deactivated on the telephone side the acceleration-option in transferring data in active-sync.
Aswell a soft-reset did not bring any changes.
What I was able to recognise:
Not all the time I tried to connect the telephone to the computer the telephone reacted in the same way! From time to time it does nothing, usually it shows a message over minutes (!) that the telephone is 'connecting with the host'. Seldomn the telephone get's to the status that it is connected. Independend to this the computer shows in the devicemanager (not the mobile-devicecenter) a identified pocket PC and this should be without problems.
The mobile devicecenterr did only one time search for a device (but did not find it), in all other cases it did not even search it.
All the HTC-Hotline now whants me to do, is a hardreset, wich I would try to avoid: all my calendar-informations are now only on my telephone, without any backups!
Does anybody have a clou what I can do in this case?
I am really disapointed with all the problems I buyed with windows7 compared with my old XP!
Thank you in advance for any suggestions.
Yours
User from Bremen
Well I don't know how to solve your problem, but I'd make a backup with SK Tools, just to be on the save side if you're gonna make a hard reset...
For example, you can try:
http://www.s-k-tools.com/index.html?m_downloads.html#tools
And.. there are rumours that the mobile center is deleting informations on first connect..
Hallo User Bremen
Ich schreibe dir mal in Deutsch
Zunächst solltest du deine Daten einmal sichern!!!
Verwende dazu MyPhone - funktioniert recht gut. Die Daten werden auf einem Internetserver hinterlegt und lassen sich später wieder zurückspielen:
http ://myphone.microsoft.com/mkweb/Start.po?mkt=de-DE
Dort kannst du dir eine SMS mit dem Link an dein Phone senden lassen - dann kannst du das Programm per WLAN installieren.
Danach ist ein Zurücksetzen möglich.
Ich hatte auch das Problem - allerdings mit einem neuen ROM. Lies sich nicht lösen, erst als ich da ROM durch ein anderes ersetzt habe - dann ging es. es lag also nicht am PC (habe auch Win7).
Gruß Ralf
Try uninstalling W7 mobile device centre from your pc and reloading it. You may also want to try a different mini usb cable.
Are all your calender events and contacts saved on your computer? If so, they will load back on your phone if you lose them after a hard reset. You will however lose txt messages and some other stuff.
Good luck
selimgoeren said:
And.. there are rumours that the mobile center is deleting informations on first connect..
Click to expand...
Click to collapse
If you don't have the info in your outlook and you have "Replace items on device" set. It will sync your device to an empty outlook and delete all contacts, calenders etc.
@all
thank you for your help!
And sorry for responding so late, I thought I was sent an e-mail if posts are on this thread.
How can I recover this thread, if there is sent no link to it?
Topic:
What has happend meanwhile:
- changed the USB-cable
- made a soft reset
Both did not really changed anything.
What has happened:
- it still takes minutes to 'search for host'
- it still only sometimes shows the message that the mobile is connected to the host
- it twice connected teh mobile to the computer (WMDC identified my mobile with it's right name) and started to syncronise. After at least five minutes it suddenly broke the connection. The WMDC is not connected anymore.
What I will do:
- first of all I try tp back up my data and then think about updating to ROM...
I am so disappointed and hopeless at this time and I am so happy about any suggestions.
Ihr könnt Tipps gerne auf auch deutsch posten!

Categories

Resources