Huawei Mate 8 NXT-AL10C00B581 (Official) Latest Firmware. (Guide with download links) - Mate 8 General

NXT-AL10C00B581
Firmware (OTA)
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1255/g104/v74488/f1/full/update.zip
http://update.hicloud.com:8180/TDS/.../v74488/f1/full/all/cn/update_full_all_cn.zip
Changelog
Dear users, this update optimizes system performance and stability, repair Taobao application text dialog box to block the input method of the problem, it is recommended you update the experience.
Optimization
Optimize micro message grab red packets speed, so you grab red packets faster into Google security patches, improve system security
Fix
Fix the problem of microblogging slowdown after cleaning the small brush
Update Considerations:
1. Huawei recommended that you do a good job of backing up your data before updating.
2. After the update is complete, the system will restart, please be patient for about five minutes.
3. If you encounter any problems during the use, you can visit the "Member Services", "Pollen Club" or call the official service hotline 400-930-9300 for support.
Official way to update
All Users with NXT-AL10C00B552, NXT-AL10C00B562, NXT-AL10C00B573, NXT-AL10C00B575 and NXT-AL10C00B577 can update using Hi****e:
1- Install HiSuite
1.1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
1.2- Install HiSuite on your Computer
2- Connect your phone to HiSuite
3- Go to Update>
Step by Step Guide (For Rooted Phones)
1- Download these 3 files (update.zip, update_full_all_cn.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1255/g104/v74488/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/.../v74488/f1/full/all/cn/update_full_all_cn.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2- Copy these 3 files (update.zip, update_full_all_cn.zip, supersu_v2.79_sr2.zip) into SD Card
3- Download TWRP Recovery 3.0.3
http://sillanwali.com/downloads/twrp-3.0.3.img
4- Run into Fastboot (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
adb devices
adb reboot bootloader
fastboot oem device-info
fastboot oem unlock ****************
To obtain bootloader unlock code, go to https://emui.huawei.com/en/plugin/unlock/index
Huawei ID is the account you use to access all Huawei services.
Log in to your Huawei ID. Phone/Email. Password ********
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5- Reboot into Recovery Mode (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
5.1- Go to: Wipe > format > type Yes
5.2- Back again, then wipe (data, dalvik, cache, system, internal data)
5.3- Don't reboot after wipe
6- Root & Firmware Installation
6.1- Install supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- Install update_full_all_cn.zip (Don't reboot after install)
ignore unmounting \cust, userdata, system error
6.3- Install update.zip (Reboot when success)
7- Factory Reset & Relock Bootloader
7.1- Factory Reset after success 100%. After that you will get NXT-AL10C17B581 (Official) Firmware.
7.2- Run Fastboot Mode
fastboot oem relock ****************
7.3- Select yes from phone.
7.3- Your phone will be automatically Factory Reset.
8- Install HiSuite (Huawei Official PC Suite)
8.1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
8.2- Install HiSuite on your Computer
9- Download apk & Install Apps using HiSuite
9.1- Google Play Store
http://www.sillanwali.com/downloads/Google Play Store 7.4.12.L-all [0] [PR] 144479971.apk
9.2- Google Play Services
http://www.sillanwali.com/downloads/Google Play Services 10.0.84 (448-137749526).apk
9.3- Google Contacts Sync
http://www.sillanwali.com/downloads/Google Contacts Sync 7.1.1.apk
9.4- Google Calendar Sync
http://www.sillanwali.com/downloads/Google Calendar Sync 5.2.3-99827563-release.apk
10- Did I help you? A ''thanks :good:'' would be highly appreciated

<root>
<root>
<component>
<name>TCPU</name>
<compress>0</compress>
</component>
<vendorInfo name="common" subpath="" logfile="changelog.xml" package="update.zip"/>
<vendorInfo name="all/cn" subpath="all/cn" logfile="" package="update_full_all_cn.zip"/>
<vendorInfo name="public" subpath="public" logfile="" package="update_data_full_public.zip"/>
<vendorInfo name="telecom/cn" subpath="telecom/cn" logfile="" package="update_full_telecom_cn.zip"/>
<files>
<file>
<spath>update_full_all_cn.zip</spath>
<dpath>update_full_all_cn.zip</dpath>
<operation>c</operation>
<md5>81BDE095CCB0BBF95CEE6B856E30DFDB</md5>
<size>16799955</size>
</file>
<file>
<spath>changelog.xml</spath>
<dpath>changelog.xml</dpath>
<operation>c</operation>
<md5>0B92FF72BCB6F2AFF51146FFB3B03427</md5>
<size>1289</size>
</file>
<file>
<spath>update_data_full_public.zip</spath>
<dpath>update_data_full_public.zip</dpath>
<operation>c</operation>
<md5>81BDE095CCB0BBF95CEE6B856E30DFDB</md5>
<size>16799955</size>
</file>
<file>
<spath>update_full_telecom_cn.zip</spath>
<dpath>update_full_telecom_cn.zip</dpath>
<operation>c</operation>
<md5>81BDE095CCB0BBF95CEE6B856E30DFDB</md5>
<size>16799955</size>
</file>
<file>
<spath>update.zip</spath>
<dpath>update.zip</dpath>
<operation>c</operation>
<md5>0ED9DF3A0D6541BD238DE5034D756D3F</md5>
<size>81879850</size>
</file>
</files>
</root>
Source: http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1255/g104/v74488/f1/full/filelist.xml
Did I help you? A ''thanks :good:'' would be highly appreciated

You are just too quick buddy

bluheart said:
You are just too quick buddy
Click to expand...
Click to collapse
You know it wasn’t always easy. Thank you!

nice, full B581! ill extract the boot image right away so it can get patched
edit: oooh, nevermind, still the OTA.... was getting excited already
Sent from my Huawei Mate 8 NXT-AL10

Lol jbmc

Is this final or still beta?
Enviado desde mi HUAWEI NXT-AL10 mediante Tapatalk

It's among final

its a dev release after the first final roms

...
Official way to update
All Users with NXT-AL10C00B552, NXT-AL10C00B562, NXT-AL10C00B573 and NXT-AL10C00B575 can update using Hi****e:
1- Install HiSuite
1.1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
1.2- Install HiSuite on your Computer
2- Connect your phone to HiSuite
3- Go to Update>
I don't know if someone has the same issue: I'm with NXT-AL10C00B575 (no root) and HiSuite does not propose at all B581 update ? Is there someone with the same situation and having found a solution to flash b581 update without rooting ?

a029159 said:
...
Official way to update
All Users with NXT-AL10C00B552, NXT-AL10C00B562, NXT-AL10C00B573 and NXT-AL10C00B575 can update using Hi****e:
1- Install HiSuite
1.1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
1.2- Install HiSuite on your Computer
2- Connect your phone to HiSuite
3- Go to Update>
I don't know if someone has the same issue: I'm with NXT-AL10C00B575 (no root) and HiSuite does not propose at all B581 update ? Is there someone with the same situation and having found a solution to flash b581 update without rooting ?
Click to expand...
Click to collapse
I am too i tried to update by hisuite doesn't work...

a029159 said:
...
Official way to update
All Users with NXT-AL10C00B552, NXT-AL10C00B562, NXT-AL10C00B573 and NXT-AL10C00B575 can update using Hi****e:
1- Install HiSuite
1.1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
1.2- Install HiSuite on your Computer
2- Connect your phone to HiSuite
3- Go to Update>
I don't know if someone has the same issue: I'm with NXT-AL10C00B575 (no root) and HiSuite does not propose at all B581 update ? Is there someone with the same situation and having found a solution to flash b581 update without rooting ?
Click to expand...
Click to collapse
1-
Enable USB Debugging on your phone:
1.1- Open Settings> About phone
1.2- Then tap “Build number” seven times to enable Developer options.
1.3- Go back to Settings menu and now you'll be able to see “Developer options” there.
1.4- Tap it and turn on USB Debugging from the menu on the next screen.
1.5- Restart your phone
2-
Install HiSuite
2.1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
2.2- Install HiSuite on your Computer
3-
Connect your phone to HiSuite
4-
Go to Update>Switch to other version>Developer
You can see latest beta version NXT-XXXXXXXXX (Developer) XXXMB, like this:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5-
Click on Update
6-
Did I help you? A ''thanks :good:'' would be highly appreciated

sillanwali said:
1-
Enable USB Debugging on your phone:
1.1- Open Settings> About phone
1.2- Then tap “Build number” seven times to enable Developer options.
1.3- Go back to Settings menu and now you'll be able to see “Developer options” there.
1.4- Tap it and turn on USB Debugging from the menu on the next screen.
1.5- Restart your phone
2-
Install HiSuite
2.1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
2.2- Install HiSuite on your Computer
3-
Connect your phone to HiSuite
4-
Go to Update>Switch to other version>Developer
You can see latest beta version NXT-XXXXXXXXX (Developer) XXXMB, like this:
5-
Click on Update
6-
Did I help you? A ''thanks :good:'' would be highly appreciated
Click to expand...
Click to collapse
Sorry but for me, in Hisuite, Developper option is "greyed" and not accessible !

a029159 said:
Sorry but for me, in Hisuite, Developper option is "greyed" and not accessible !
Click to expand...
Click to collapse
Same here. USB debugging is enabled and usually I can get the update through HiCare.
Sent from my HUAWEI NXT-AL10 using XDA-Developers Legacy app

I failed at step 6.3 install update.zip, E: unknown command (error), Updater process ended with ERROR: 7 Error installing zip file///

Phone doesn't boot in recovery after flashing recovery
Strange... after "fastboot flash recovery (PATH-TO)\twrp-3.0.3.img"" the twrp recovery is flashed but I am unable to boot into recovery.
It remains locked with the yellow warning message but it doesn't boot.
Any clue about the reason and how to fix it?

have you tried all button combinations? both when connected to a computer and disconnected?
total of three combos:
power + volume up
power + volume down
power + volume up + volume down
try all three in both states, im sure one of them will get u into the recovery

johnney said:
I failed at step 6.3 install update.zip, E: unknown command (error), Updater process ended with ERROR: 7 Error installing zip file///
Click to expand...
Click to collapse
aeas said:
Strange... after "fastboot flash recovery (PATH-TO)\twrp-3.0.3.img"" the twrp recovery is flashed but I am unable to boot into recovery.
It remains locked with the yellow warning message but it doesn't boot.
Any clue about the reason and how to fix it?
Click to expand...
Click to collapse
If u flash this u'll get no OS! Cus its just 70mb! It's not a full firmware!
If u where android 6 just use rescue fastboot to flash twrp for emui4 or 4.1 (based on ur last firmware)
Then u cn enter twrp to flash a real firmware
How to enter rescue fastboot ->turn off ur phone(there's a shutdown option in eRecovery power+vol up), connect usb then hold power+vol down
Sent from my NXT-L29 using Tapatalk

Thanks for your help.
I managed to restart using buttons and reinstalled all twrp 3. Everything working again as it was when I started.
Yes, I have also discovered that it is not a full rom, my great mistake but I didn't reach that point cause I stopped after I couldn't restart in TWRP recovery.
I am now in the process of knowing what is the right procedure I have to followed from my rom (KangVIP-Slim-B386-ViperAtmos) to a Nougat one.

aeas said:
Strange... after "fastboot flash recovery (PATH-TO)\twrp-3.0.3.img"" the twrp recovery is flashed but I am unable to boot into recovery.
It remains locked with the yellow warning message but it doesn't boot.
Any clue about the reason and how to fix it?
Click to expand...
Click to collapse
To enter Fastboot , eRecovery, Recovery or Upgrade mode:
Connect phone to the computer:
Fastboot mode: long press the volume down key + power button.
eRecovery mode: long press the volume up key + power button.
Do not connect to computer:
Recovery mode: long press the volume up key + power button.
Upgrade mode: long press the volume up key + volume down key + power button.
When the phone is in one of these modes, long press the power button to restart the phone.

Related

How to install NXT-L29C432B560 (Official) Stock Firmware. (Guide with download links)

NXT-L29C432B560
Firmware: B560
Device name: Huawei Mate 8
Model number: Huawei NXT-L29
Build Number: NXT- L29C432B560
EMUI Version: 5.0
Android Version: 7.0
Region: Europe
Status: Official
Firmware
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...3563/f1/full/hw/eu/update_data_full_hw_eu.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/filelist.xml
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/changelog.xml
Changelog
This update optimizes system performance and stability, and fixes an issue where some UI elements were displayed incorrectly.
Optimizations
Decreases power consumption to prolong usage time. Improves system performance and stability for smoother operations. Optimizes the display in the status bar and notification panel, which now displays notifications more clearly. Integrates Google security patches for improved system security. [Fixes] Fixes an issue where no control buttons were displayed on the lock screen for third-party music apps. Fixes an issue where app icons were not being displayed for messages in the status bar. Fixes an issue where the text wasn't displayed clearly in third-party apps with a white background. Fixes an issue where call durations were not displayed in the call log. Fixes an issue where some UI elements were displayed incorrectly.
Update notes
1. We recommend that you back up any important data before updating and factory reset.
2. The system will restart after the update. This will take about 5 minutes.
3. The Barclays app quits mid-operation because it is incompatible with Android 7.0. Please download the latest compatible version when it is available.
4. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance.
Dload Method 1
1- First, download ubdate.zip and extract it.
2- Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3- Now go to the phone Settings>Update and press the menu button.
4- Now select choose Local update.
5- It will show the update.app file now tap on it to start the installation process.
6- Wait until the installation process is complete and then reboot your device.
7- Done
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Dload Method 2
1- Download update.zip and extract it.
2- Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3- Now turn off your device.
4- Now press 3 buttons (Volume Up, Volume Down and Power Button) together. The update process will start automatically.
5- Now wait for some time to complete the process.
6- Done.
7- Did I help you? A ''thanks :good:'' would be highly appreciated
HiSuite Method
All Users with NXT- L29C432BXX can update using HiSuite:
1- Install HiSuite
2- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
3- Install HiSuite on your Computer
4- Connect your phone to HiSuite
5- Go to Update>
6- Now wait for some time to complete the process.
7- Done.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Step by Step Guide
1- Download these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...3563/f1/full/hw/eu/update_data_full_hw_eu.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2- Copy these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip) into SD Card
3- Download TWRP Recovery
http://sillanwali.com/downloads/twrp-3.0.3.img
4- Run into Fastboot (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
adb devices
adb reboot bootloader
fastboot oem device-info
fastboot oem unlock ****************
To obtain bootloader unlock code, go to https://emui.huawei.com/en/plugin/unlock/index
Huawei ID is the account you use to access all Huawei services.
Log in to your Huawei ID. Phone/Email. Password ********
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5- Reboot into Recovery Mode (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
5.1- Go to: Wipe > format > type Yes
5.2- Back again, then wipe> advance wipe> (data, dalvik, cache, system, internal data)
5.3- Don't reboot after wipe
6- Root & Firmware Installation
6.1- Install supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_full_hw_eu.zip (Don't reboot after install)
ignore unmounting \cache, cust, system, userdata error
6.3- update.zip (Reboot when success)
ignore E:unknown command
7- Factory Reset & Relock Bootloader
7.1- Factory Reset after success 100%. After that you will get NXT-L29C432B560(Official) Firmware.
7.2- Run Fastboot Mode
fastboot oem relock ****************
7.3- Select yes from phone.
7.3- Your phone will be automatically Factory Reset.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Have you tried? Today's update is giving me an error when i try to install it "check_write_data_to_partition, write data error E:unknown command [errno] update_huawei_pkg_from_ota_zip: update package from zip failed"
The yesterday's update instead works but i got that nfc problem
Can I install on L09?
Giving it a try now.
---------- Post added at 05:36 PM ---------- Previous post was at 04:40 PM ----------
ImSpiderman said:
Have you tried? Today's update is giving me an error when i try to install it "check_write_data_to_partition, write data error E:unknown command [errno] update_huawei_pkg_from_ota_zip: update package from zip failed"
The yesterday's update instead works but i got that nfc problem
Click to expand...
Click to collapse
Getting the same thing on my end.
In TWRP, format data then it will write to data partition.
Do factory reset to reset data partition password.
If u r already on nougat, just dload and reboot
I tried to dload from nougat but it fails instantly. Also, when i tried installing this from twrp i formatted everything but sd before trying to install it
ImSpiderman said:
Have you tried? Today's update is giving me an error when i try to install it "check_write_data_to_partition, write data error E:unknown command [errno] update_huawei_pkg_from_ota_zip: update package from zip failed"
The yesterday's update instead works but i got that nfc problem
Click to expand...
Click to collapse
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_full_hw_eu.zip (Don't reboot after install)
ignore unmounting \cache, cust, system, userdata, error
6.3- update.zip (Reboot when success)
ignore E:unknown command
sillanwali said:
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_full_hw_eu.zip (Don't reboot after install)
ignore unmounting \cache, cust, system, userdata, error
6.3- update.zip (Reboot when success)
ignore E:unknown command
Click to expand...
Click to collapse
I just keep getting the same error flashing both update files, actually the installation of the full hw zip last like a minute but the update's installation just stops immediately after that error
Then you may have to try via PC hisuite
Or
Go back to 4.1 and flash fresh
What about NFC? it is added to settings or has this version the same bug as other 560 versions?
bluheart said:
Then you may have to try via PC hisuite
Or
Go back to 4.1 and flash fresh
Click to expand...
Click to collapse
im flashing with twrp from 4.1 everytime actually, also hisuite when i have old b560 says me that im on latest firmware
Got error 7 when trying to flash these two zips. Tried everything from installing from an OTG cable to internal storage, error 7 all the way.
All, maybe I am missing something....I am on Nougat already but would like to reflash 560 via TWRP due to the fact that dload isn't working (update aborted after 5%). Unfortunately even with a ok. after flashing recovery I am still on stock recovery....Please advice!
flyingjack said:
All, maybe I am missing something....I am on Nougat already but would like to reflash 560 via TWRP due to the fact that dload isn't working (update aborted after 5%). Unfortunately even with a ok. after flashing recovery I am still on stock recovery....Please advice!
Click to expand...
Click to collapse
Yes flash and wipe cache
---------- Post added at 12:21 PM ---------- Previous post was at 12:20 PM ----------
Faithnetic said:
Got error 7 when trying to flash these two zips. Tried everything from installing from an OTG cable to internal storage, error 7 all the way.
Click to expand...
Click to collapse
In TWRP, format data only then u will be able towards write on that partition.
bluheart said:
Yes flash and wipe cache
---------- Post added at 12:21 PM ---------- Previous post was at 12:20 PM ----------
Fastboot erase cache dosn't work....?????
Click to expand...
Click to collapse
after i format data, wiped everything but microsd it still gives error, also i need to add that before the error it says
"mountencrypt: failed to mount /data: no such file or directory" maybe we need to change data filesystem? or what? i really dont understand why both files wont flash, i flashed b521 and first b560 without problems of any kind
Same error 7 :SS
Then go back to 4.1 and relax for the next update
All, I need your help and advice....
I massed up my phone....I flashed TWRP but never been able to enter Recovery as "fastboot erase chache" did not work and ended up in a bootloop while trying to access Recovery...after several additional -stupied- tries I distroied my OS (5B60), menas I lost my key-board etc....
I still can connect via fastboot and/or adp but cannot clear cache. Therefore I am not able to enter TWRP and flash any softwrae. Dload doesn't work either as I donot have a stock recovery...
Please guide me back to a working phone
Thx a lot!!!
flyingjack said:
All, I need your help and advice....
I massed up my phone....I flashed TWRP but never been able to enter Recovery as "fastboot erase chache" did not work and ended up in a bootloop while trying to access Recovery...after several additional -stupied- tries I distroied my OS (5B60), menas I lost my key-board etc....
I still can connect via fastboot and/or adp but cannot clear cache. Therefore I am not able to enter TWRP and flash any softwrae. Dload doesn't work either as I donot have a stock recovery...
Please guide me back to a working phone
Thx a lot!!!
Click to expand...
Click to collapse
Try to relock bootloader and dload again, it should work

How to install NXT-L09C432B560 (Official) Stock Firmware. (Guide with download links)

NXT-L09C432B560
Firmware: B560
Device name: Huawei Mate 8
Model number: Huawei NXT-L09
Build Number: NXT- L09C432B560
EMUI Version: 5.0
Android Version: 7.0
Region: Europe
Firmware
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...4/v73563/f1/full//hw/eu/update_full_hw_eu.zip
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/filelist.xml
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/changelog.xml
Changelog
This update optimizes system performance and stability, and fixes an issue where some UI elements were displayed incorrectly.
Optimizations
Decreases power consumption to prolong usage time. Improves system performance and stability for smoother operations. Optimizes the display in the status bar and notification panel, which now displays notifications more clearly. Integrates Google security patches for improved system security.
Fixes
Fixes an issue where no control buttons were displayed on the lock screen for third-party music apps. Fixes an issue where app icons were not being displayed for messages in the status bar. Fixes an issue where the text wasn't displayed clearly in third-party apps with a white background. Fixes an issue where call durations were not displayed in the call log. Fixes an issue where some UI elements were displayed incorrectly.
Update notes
1. We recommend that you back up any important data before updating.
2. The system will restart after the update. This will take about 5 minutes.
3. The Barclays app quits mid-operation because it is incompatible with Android 7.0. Please download the latest compatible version when it is available.
4. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance.
Dload Method 1
1- First, download ubdate.zip and extract it.
2- Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3- Now go to the phone Settings>Update and press the menu button.
4- Now select choose Local update.
5- It will show the update.app file now tap on it to start the installation process.
6- Wait until the installation process is complete and then reboot your device.
7- Done
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Dload Method 2
1- Download update.zip and extract it.
2- Now create a folder dload in the root of your SD card and place the update.app file in that folder.
3- Now turn off your device.
4- Now press 3 buttons (Volume Up, Volume Down and Power Button) together. The update process will start automatically.
5- Now wait for some time to complete the process.
6- Done.
7- Did I help you? A ''thanks :good:'' would be highly appreciated
HiSuite Method
All Users with NXT- L09C432BXX can update using HiSuite:
1- Install HiSuite
2- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
3- Install HiSuite on your Computer
4- Connect your phone to HiSuite
5- Go to Update>
6- Now wait for some time to complete the process.
7- Done.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Step by Step Guide (For Rooted Phones)
1- Download these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...4/v73563/f1/full//hw/eu/update_full_hw_eu.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2- Copy these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip) into SD Card
3- Download TWRP Recovery
http://sillanwali.com/downloads/twrp-3.0.3.img
4- Run into Fastboot (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
adb devices
adb reboot bootloader
fastboot oem device-info
fastboot oem unlock ****************
To obtain bootloader unlock code, go to https://emui.huawei.com/en/plugin/unlock/index
Huawei ID is the account you use to access all Huawei services.
Log in to your Huawei ID. Phone/Email. Password ********
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5- Reboot into Recovery Mode (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
5.1- Go to: Wipe > format > type Yes
5.2- Back again, then wipe> advance wipe> (data, dalvik, cache, system, internal data)
5.3- Don't reboot after wipe
6- Root & Firmware Installation
6.1- Install supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- Install update_full_hw_eu.zip (Don't reboot after install)
ignore unmounting \cust, userdata, system error
6.3- Install update.zip (Reboot when success)
7- Factory Reset & Relock Bootloader
7.1- Factory Reset after success 100%. After that you will get NXT- L09C432B560 (Official) Firmware.
7.2- Run Fastboot Mode
fastboot oem relock ****************
7.3- Select yes from phone.
7.3- Your phone will be automatically Factory Reset.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
<root>
<root>
<component>
<name>TCPU</name>
<compress>0</compress>
</component>
<vendorInfo name="common" subpath="" logfile="changelog.xml" package="update.zip"/>
<vendorInfo name="hw/eu" subpath="hw/eu" logfile="" package="update_full_hw_eu.zip"/>
<vendorInfo name="public" subpath="public" logfile="" package="update_data_full_public.zip"/>
<files>
<file>
<spath>changelog.xml</spath>
<dpath>changelog.xml</dpath>
<operation>c</operation>
<md5>0D679BA87E653806C93212E237DB0D4C</md5>
<size>44976</size>
</file>
<file>
<spath>update_full_hw_eu.zip</spath>
<dpath>update_full_hw_eu.zip</dpath>
<operation>c</operation>
<md5>653FF22700F58BB336AA86BB13FAB1A2</md5>
<size>554919746</size>
</file>
<file>
<spath>update_data_full_public.zip</spath>
<dpath>update_data_full_public.zip</dpath>
<operation>c</operation>
<md5>7ACBBB5D655083793BD7EBCE5E22A32B</md5>
<size>381762140</size>
</file>
<file>
<spath>update.zip</spath>
<dpath>update.zip</dpath>
<operation>c</operation>
<md5>0B31191173DEECC0C224D64BF0F97C38</md5>
<size>1488820456</size>
</file>
</files>
</root>
Is this another beta or...full Nougat version...?
Sojiroska said:
Is this another beta or...full Nougat version...?
Click to expand...
Click to collapse
Stable Version
Changelog
This update optimizes system performance and stability, and fixes an issue where some UI elements were displayed incorrectly.
Is twrp the only option or can we use dload method?
Sent from my HUAWEI NXT-L09 using Tapatalk
legendarycom said:
Is twrp the only option or can we use dload method?
Sent from my HUAWEI NXT-L09 using Tapatalk
Click to expand...
Click to collapse
You can also apply dload method.
Do you have to have unlocked bootloader for the dload method to work? I've tried it and it stops at 30% with an error message.
sillanwali said:
You can also apply dload method.
Click to expand...
Click to collapse
Tnx. Got offical OTA trough hicare early adopters.
@sillanwali
Can you pleas help me to get B560 im now on B521 beta version i not have Twrp or Root and my bootloader i think is unlocked
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
blinkt88 said:
@sillanwali
Can you pleas help me to get B560 im now on B521 beta version i not have Twrp or Root and my bootloader i think is unlocked
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
Click to expand...
Click to collapse
If your phone is NXT-L09432BXXX. It don't matter you've installed B521 beta via Root, TRWP, Dload or other ways. You've to just:
1- Install HiSuite
2- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
3- Install HiSuite on your Computer
4- Connect your phone to HiSuite
5- Go to Update>
Click on other version, you can see NXT-L09432B560.
6- Now wait for some time to complete the process.
7- Done.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
sillanwali said:
If your phone is NXT-L09432BXXX. It don't matter you've installed B521 beta via Root, TRWP, Dload or other ways. You've to just:
1- Install HiSuite
2- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
3- Install HiSuite on your Computer
4- Connect your phone to HiSuite
5- Go to Update>
Click on other version, you can see NXT-L09432B560.
6- Now wait for some time to complete the process.
7- Done.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Click to expand...
Click to collapse
But i hear somewhere if i dload to B560 than NFC and few other things not work and is good to go back to B152 or B170 and than wait for OTA update for B560
My model is NXT L09C432 and im on B521 beta test keys its sayd NRD90M test keys does i can anyway use HiSuite and update to B560
Does i lose data and apps if update to B560 via HiSuite?
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
---------- Post added at 11:38 AM ---------- Previous post was at 10:46 AM ----------
sillanwali said:
If your phone is NXT-L09432BXXX. It don't matter you've installed B521 beta via Root, TRWP, Dload or other ways. You've to just:
1- Install HiSuite
2- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
3- Install HiSuite on your Computer
4- Connect your phone to HiSuite
5- Go to Update>
Click on other version, you can see NXT-L09432B560.
6- Now wait for some time to complete the process.
7- Done.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Click to expand...
Click to collapse
I try with HiSuite and no new update find its says i have latest DRM90M TEST KEYS
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
blinkt88 said:
But i hear somewhere if i dload to B560 than NFC and few other things not work and is good to go back to B152 or B170 and than wait for OTA update for B560
My model is NXT L09C432 and im on B521 beta test keys its sayd NRD90M test keys does i can anyway use HiSuite and update to B560
Does i lose data and apps if update to B560 via HiSuite?
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
---------- Post added at 11:38 AM ---------- Previous post was at 10:46 AM ----------
I try with HiSuite and no new update find its says i have latest DRM90M TEST KEYS
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
Click to expand...
Click to collapse
It's mean your phone is not NXT-L09C432
Backup
1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
2- Install HiSuite on your Computer
3- Connect your phone to HiSuite
Accept options on your phone:
Allow access to device data? >YES, ALLOW ACCESS
Allow connection in HDB mode? >(Always) > OK
4- Go to Backup>
5- Now wait for some time to estimate the data.
6- Select all>Encrypt with password>Backup>
Set Password
Confirm Password
Password hint
7- Click OK
8- Now wait for some time to complete the process.
9- Done.
10- Did I help you? A ''thanks :good:'' would be highly appreciated
My model is NXT L09C432
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
blinkt88 said:
My model is NXT L09C432
View attachment 4017660
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
Click to expand...
Click to collapse
I finally was able to install the update, but as blinkt88 mentions i also get test-keys build. It also seems like the full rom .zip isn't available from huawei's servers anymore, so im not able to test that. Any solutions to this?
LINK IS BROKEN/DOWN
**
http://update.hicloud.com:8180/TDS/...4/v73563/f1/full//hw/eu/update_full_hw_eu.zip
jee82 said:
I finally was able to install the update, but as blinkt88 mentions i also get test-keys build. It also seems like the full rom .zip isn't available from huawei's servers anymore, so im not able to test that. Any solutions to this?
Click to expand...
Click to collapse
Which update you install B521 or B560?
Huawei Fan Club
www.facebook.com/groups/huaweifanclub
I installed the one from this post, so I suppose it is 560, no way to be sure tho since it only says test-keys. I've also applied 560 ota from firmware finder after i installed this one, so I reckon I'm running 560, kernel version is also 30 Dec.
I came from nxt-l09c432b192.
xT29c said:
LINK IS BROKEN/DOWN
**
http://update.hicloud.com:8180/TDS/...4/v73563/f1/full//hw/eu/update_full_hw_eu.zip
Click to expand...
Click to collapse
http://update.hicloud.com:8180/TDS/...3563/f1/full/hw/eu/update_data_full_hw_eu.zip
My version is nxt-l09c605b100.
Can I also update?

[SOLVED]HELP! briked mate 8 ,no OS!

after formating data i think i failed to flash emui5 and after reboot i stuck in [ur device has been unlocked and cnt trusted] page
also download latest firmware not working in eRecovery
dload not working! it stuck in ur device is booting now...
so i need to boot into fastboot to flash twrp but i dont know how, i tried holding power+vol down but it not working i guess!
any ideas?
amin318 said:
after formating data i think i failed to flash emui5 and after reboot i stuck in [ur device has been unlocked and cnt trusted] page
also download latest firmware not working in eRecovery
dload not working! it stuck in ur device is booting now...
so i need to boot into fastboot to flash twrp but i dont know how, i tried holding power+vol down but it not working i guess!
any ideas?
Click to expand...
Click to collapse
connect usb Cable first then press power + volume down
amin318 said:
after formating data i think i failed to flash emui5 and after reboot i stuck in [ur device has been unlocked and cnt trusted] page
also download latest firmware not working in eRecovery
dload not working! it stuck in ur device is booting now...
so i need to boot into fastboot to flash twrp but i dont know how, i tried holding power+vol down but it not working i guess!
any ideas?
Click to expand...
Click to collapse
NXT-AL00C17B573 (Official) Huawei Mate 8 Firmware Android 7.0 EMUI 5.0
Step by Step Guide
1.
Download these 3 files (update.zip, update_data_full_cmcc_cn.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1255/g104/v71280/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...80/f1/full/all/cn/update_data_full_all_cn.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2-
Copy these 3 files (update.zip, update_data_full_cmcc_cn.zip, update_data_full_all_cn.zip) into SD Card
3-
Download TWRP Recovery 3.0.3
http://sillanwali.com/downloads/twrp-3.0.3.img
4-
adb devices
adb reboot bootloader
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5-
5.1- Reboot your phone to TWRP then choose Wipe > format > type Yes
5.2- Back again, then wipe (data, dalvik, cache, system)
5.3- Don't reboot after install
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_data_full_all_cn.zip (Don't reboot after install)
ignore unmounting \cust, userdata, system error
6.3- update.zip (Reboot when success)
7-
Factory Reset after success 100%. After that you will get NXT-AL10C17B573 (Official) Stock Firmware.
8-
HiSuite
8.1- Download HiSuite (http://consumer.huawei.com/minisite/HiSuite_en/index.html)
8.2- Install HiSuite on your Computer
9-
Download apk & Install Apps using HiSuite
9.1- Google Play Store
http://www.sillanwali.com/downloads/Google Play Store 7.4.12.L-all [0] [PR] 144479971.apk
9.2- Google Play Services
http://www.sillanwali.com/downloads/Google Play Services 10.0.84 (448-137749526).apk
9.3- Google Contacts Sync
http://www.sillanwali.com/downloads/Google Contacts Sync 7.1.1.apk
9.4- Google Calendar Sync
http://www.sillanwali.com/downloads/Google Calendar Sync 5.2.3-99827563-release.apk
10-
Did I help you? A ''thanks :good:'' would be highly appreciated
hamadazh said:
connect usb Cable first then press power + volume down
Click to expand...
Click to collapse
thats it thaaaaaaanks in advanced:fingers-crossed::fingers-crossed::fingers-crossed:

Help with update to NXT-L29C432B560

Hey guys my nxt-l29 was running on
NXT-L29C900B320
after the new B560 update i debrand my phone to C432 and flash the system but didn't work i tried every thing i found and it didn't work،
Now my phone is on NXT-L29BC432B320
But bootloader and kernel on NXT-L29BC900B320
What should i do to be able to flash C432B560?
Thanks
Sent from my HUAWEI NXT-L29 using XDA-Developers Legacy app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
alobiedy said:
Hey guys my nxt-l29 was running on
NXT-L29C900B320
after the new B560 update i debrand my phone to C432 and flash the system but didn't work i tried every thing i found and it didn't work،
Now my phone is on NXT-L29BC432B320
But bootloader and kernel on NXT-L29BC900B320
What should i do to be able to flash C432B560?
Thanks
Click to expand...
Click to collapse
How to install NXT-L09C432B560 (Official) Firmware. (Guide with download links)
NXT-L09C432B560
Changelog
This update optimizes system performance and stability, and fixes an issue where some UI elements were displayed incorrectly.
Optimizations
Decreases power consumption to prolong usage time. Improves system performance and stability for smoother operations. Optimizes the display in the status bar and notification panel, which now displays notifications more clearly. Integrates Google security patches for improved system security.
Fixes
Fixes an issue where no control buttons were displayed on the lock screen for third-party music apps. Fixes an issue where app icons were not being displayed for messages in the status bar. Fixes an issue where the text wasn't displayed clearly in third-party apps with a white background. Fixes an issue where call durations were not displayed in the call log. Fixes an issue where some UI elements were displayed incorrectly.
Update notes
1. We recommend that you back up any important data before updating.
2. The system will restart after the update. This will take about 5 minutes.
3. The Barclays app quits mid-operation because it is incompatible with Android 7.0. Please download the latest compatible version when it is available.
4. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance.
Step by Step Guide
1-
Download these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...4/v73563/f1/full//hw/eu/update_full_hw_eu.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2-
Copy these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip) into SD Card
3-
Download TWRP Recovery 3.0.3
http://sillanwali.com/downloads/twrp-3.0.3.img
4-
adb devices
adb reboot bootloader
fastboot oem device-info
fastboot oem unlock ****************
To obtain bootloader unlock code, go to https://emui.huawei.com/en/plugin/unlock/index
Huawei ID is the account you use to access all Huawei services.
Log in to your Huawei ID. Phone/Email. Password ********
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5-
5.1- Reboot your phone to TWRP then choose Wipe > format > type Yes
5.2- Back again, then wipe (data, dalvik, cache, system)
5.3- Don't reboot
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_full_hw_eu.zip (Don't reboot after install)
ignore unmounting \ cust, system, userdata error
6.3- update.zip (Reboot when success)
7-
7.1- Factory Reset after success 100%. After that you will get NXT-L09C432B560 (Official) Firmware.
7.2- Run bootloader
7.2- fastboot oem relock ****************
7.3- Factory Reset
8-
Did I help you? A ''thanks'' would be highly appreciated
sillanwali said:
How to install NXT-L09C432B560 (Official) Firmware. (Guide with download links)
NXT-L09C432B560
Changelog
This update optimizes system performance and stability, and fixes an issue where some UI elements were displayed incorrectly.
Optimizations
Decreases power consumption to prolong usage time. Improves system performance and stability for smoother operations. Optimizes the display in the status bar and notification panel, which now displays notifications more clearly. Integrates Google security patches for improved system security.
Fixes
Fixes an issue where no control buttons were displayed on the lock screen for third-party music apps. Fixes an issue where app icons were not being displayed for messages in the status bar. Fixes an issue where the text wasn't displayed clearly in third-party apps with a white background. Fixes an issue where call durations were not displayed in the call log. Fixes an issue where some UI elements were displayed incorrectly.
Update notes
1. We recommend that you back up any important data before updating.
2. The system will restart after the update. This will take about 5 minutes.
3. The Barclays app quits mid-operation because it is incompatible with Android 7.0. Please download the latest compatible version when it is available.
4. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance.
Step by Step Guide
1-
Download these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G753/g104/v73563/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...4/v73563/f1/full//hw/eu/update_full_hw_eu.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2-
Copy these 3 files (update.zip, update_full_hw_eu.zip, supersu_v2.79_sr2.zip) into SD Card
3-
Download TWRP Recovery 3.0.3
http://sillanwali.com/downloads/twrp-3.0.3.img
4-
adb devices
adb reboot bootloader
fastboot oem device-info
fastboot oem unlock ****************
To obtain bootloader unlock code, go to https://emui.huawei.com/en/plugin/unlock/index
Huawei ID is the account you use to access all Huawei services.
Log in to your Huawei ID. Phone/Email. Password ********
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5-
5.1- Reboot your phone to TWRP then choose Wipe > format > type Yes
5.2- Back again, then wipe (data, dalvik, cache, system)
5.3- Don't reboot
6-
Install
6.1- supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- update_full_hw_eu.zip (Don't reboot after install)
ignore unmounting \ cust, system, userdata error
6.3- update.zip (Reboot when success)
7-
7.1- Factory Reset after success 100%. After that you will get NXT-L09C432B560 (Official) Firmware.
7.2- Run bootloader
7.2- fastboot oem relock ****************
7.3- Factory Reset
8-
Did I help you? A ''thanks'' would be highly appreciated
Click to expand...
Click to collapse
Thanx alot sillanwali, i did all that steps again and didn't work too
Sent from my HUAWEI NXT-L29 using XDA-Developers Legacy app

How to install NXT-L29C185B560 (Official) Firmware. (Guide with download links)

NXT-L29C185B560
Firmware: B560
Device name: Huawei Mate 8
Model number: Huawei NXT-L29
Build Number: NXT-L29C185B560
EMUI Version: 5.0
Android Version: 7.0
Update Version: v74783
Region: Middle East, Africa
Firmware
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1582/g104/v74783/f1/full/changelog.xml
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1582/g104/v74783/f1/full/filelist.xml
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1582/g104/v74783/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...mer.huawei.com/minisite/HiSuite_en/index.html)
3- Install HiSuite on your Computer
4- Connect your phone to HiSuite
5- Go to Update>
6- Now wait for some time to complete the process.
7- Done.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Step by Step Guide (For Rooted Phones)
1- Download these 3 files (update.zip, update_full_hw_meafnaf.zip, supersu_v2.79_sr2.zip)
1.1- http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1582/g104/v74783/f1/full/update.zip
1.2- http://update.hicloud.com:8180/TDS/...ll/hw/meafnaf/update_data_full_hw_meafnaf.zip
1.3- http://www.sillanwali.com/downloads/supersu_v2.79_sr2.zip
2- Copy these 3 files (update.zip, update_full_hw_meafnaf.zip, supersu_v2.79_sr2.zip) into SD Card
3- Download TWRP Recovery
http://sillanwali.com/downloads/twrp-3.0.3.img
4- Run into Fastboot (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
adb devices
adb reboot bootloader
fastboot oem device-info
fastboot oem unlock ****************
To obtain bootloader unlock code, go to https://emui.huawei.com/en/plugin/unlock/index
Huawei ID is the account you use to access all Huawei services.
Log in to your Huawei ID. Phone/Email. Password ********
fastboot flash recovery (PATH-TO)\twrp-3.0.3.img
5- Reboot into Recovery Mode (https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441)
5.1- Go to: Wipe > format > type Yes
5.2- Back again, then wipe> advance wipe> (data, dalvik, cache, system, internal data)
5.3- Don't reboot after wipe
6- Root & Firmware Installation
6.1- Install supersu_v2.79_sr2.zip (Don't reboot after install)
6.2- Install update_full_hw_meafnaf.zip (Don't reboot after install)
ignore unmounting \cust, userdata, system error
6.3- Install update.zip (Reboot when success)
7- Factory Reset & Relock Bootloader
7.1- Factory Reset after success 100%. After that you will get NXT-L09C185B560 (Official) Firmware.
7.2- Run Fastboot Mode
fastboot oem relock ****************
7.3- Select yes from phone.
7.3- Your phone will be automatically Factory Reset.
8- Did I help you? A ''thanks :good:'' would be highly appreciated
Quick as usual
bluheart said:
Quick as usual
Click to expand...
Click to collapse
:good:
I just tried via hisuite its not working? Also a few users are reporting issues with bluetooth not working? and no keyboard comes with the build?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5- Reboot into Recovery Mode (https://forum.xda-developers.com/mat...-mode-t3543441)
5.1- Go to: Wipe > format > type Yes
Wipe "Fail" How to fix?
full rom can be flashed over firmware B320?
bissa said:
full rom can be flashed over firmware B320?
Click to expand...
Click to collapse
Nope , didn't work for me
Dload Method 1/2 like L29C432B560 is not available for L29C185B560?
I have the same problem. Does not work with dload(
Anyone has solution for that?
Link for (update_full_hw_meafnaf) not working
can you fix it Please.
unbreakable1ali said:
Nope , didn't work for me
Click to expand...
Click to collapse
Links updated, download again.
Azazell83 said:
5- Reboot into Recovery Mode (https://forum.xda-developers.com/mat...-mode-t3543441)
5.1- Go to: Wipe > format > type Yes
Wipe "Fail" How to fix?
Click to expand...
Click to collapse
Screenshot, please.
Problem with BT
Hello,
I'm the only one with a bluetooth not working after flash ?
If i roll back to previous rom, bluetooth working again...
music player & theme app updated?
I rollback to B200. B560 is OTA, not is FULL for C185! Bluetooth not working, options is laggs etc.
Azazell83 said:
I rollback to B200. B560 is OTA, not is FULL for C185! Bluetooth not working, options is laggs etc.
Click to expand...
Click to collapse
B560 is full, see screenshot
https://dl.xda-developers.com/4/0/4....png?key=URuK4-f9-3ulIHp-2GvKGw&ts=1487330818
aliishmas said:
music player & theme app updated?
Click to expand...
Click to collapse
Yes
sillanwali said:
B560 is full, see screenshot
https://dl.xda-developers.com/4/0/4....png?key=URuK4-f9-3ulIHp-2GvKGw&ts=1487330818
Click to expand...
Click to collapse
Screenshots not working, please fix , BTW. B560 is FULL, but not C185! Is full for others models Mate 8. On Firmware Finder we I see only OTA version. We must waiting for FULL.
SOrry for my bad english
Azazell83 said:
Screenshots not working, please fix , BTW. B560 is FULL, but not C185! Is full for others models Mate 8. On Firmware Finder we I see only OTA version. We must waiting for FULL.
SOrry for my bad english
Click to expand...
Click to collapse
Please, find Attachment
Hm yes this is Full. But I havent updater from B200 This is your screenshot?

Categories

Resources