Hi,
I have a big problem, i when i started my SPV M650 (Orange phone) 2 days ago it didn't want to start (blocked on orange splash screen) so i made a hard reset and it was working.as i didn't want to keep orange OS i tried to flash it.
As a newbie, i tried to flash it with a HTC Rom without unlocking the CID. and..... didn't work !
Retry : updater says no system at all was installed on the phone then, it had passed by and installed the rom (don't know why)
yap, installed but didn't work! still blocked on splash screen sometimes go on WM6 welcome screen and one time accessed the Windows Mobile.
And one hour later.... black screen !
So, i tried to reflash it in bootloader mode with the original orange ROM, it worked, but still blocked on the orange splash screen and the OS version written on this screen was 1.84.0.0 (it should be 1.84.73.2) and screen was brightening so reflash a second time with that original rom, error 276: update error. Now everytime i start the phone, it is in bootloader mode with RUU written on it (in update process i suppose) and everytime i retry to update, error 276: update error. then tried with SD card: card no recognized and still blocked on the bootloader mode update process.
So,
- is there a way to update or flash the bootloader ?
- has my phone his hardware totally crashed
(because i think orange won't never accept warranty, even in normal way they only accept it when you are dying front of their door, and its not sure if they could kill you just for pleasure they'll do)
Hey Guys,
I'am wondering if there is a possibility to protect the bootloader mode.
For example if you have installed a 'GPS tracking software' and your phone gets stolen, it's very easy to flash a new ROM on your phone and nobody is able to trace you anymore. Or if you have PDA's for your personal, and you don't want them to **** with it.
That way your phone is totally protected!
Maybe somebody is able to make a .CAB so you need to enter a password every time you enters the bootloader mode, or is it not possible to use the keyboard in that mode?
Anyway: IS THERE ANY SOLUTION
'cause I am just a rookie
Thanks in advance,
GertieBoy
You cant patch your bootloader with a cab ... it have nothing to do with the OS
Bootloader is a part of the spl
Depending on your device, you could build something like that in using one of Olipro's developer SPL versions. You better know what you're doing though, because unless you are also security unlocked & knw how to DL data to the device, if you make an error you could be in for trouble.
The easiest thing I could think of though would be to modify the BL acceptable model number to something non-exsistent, after installing your rom of choice, but then again, there is always ways to bypass the SPL.
Reset button broken-cant bootloader mode
Is there another way to put a 6700 into bootloader mode without the stylus hole being part of process? the reset button broke off my ppc 6700 apache.
Thanjks
My heads spinning from all the information aka post and threads, but im still stuck like my wizard on the 2nd splash screen.
I wasnt trying to upgrade the rom jst clear storage but after everything ive read i would like to upgrade to wm6 but first i want to get my wizard working.
I tried backing up the rom to the sd card but I get "You didn't get the proper security level to download a specific image" So i take it my wizard is cid locked.
My IPL:1.01 and SPL:1.06 does that mean its a g3. My activesync 4.5 doesnt pick up my wizard is it because it cant boot, i tried with it in bootloader mode still doesnt pick it up.
So plz point me in the right direction to fix my wizard
ok i think the place where im stuck at is cid unlocking my wizard with out using that imei site. any help or is there another way to do this.
This helped me when I was stuck on the first screen. For some reason, the Radio file was gone. Follow this exactly, it works. In my case (sounds like yours also), at the end of this you will at least have access to the phone again.
http://forum.xda-developers.com/showthread.php?t=276963&highlight=bootloader
After your done. You will have a RGB screen, then follow these directions to load a base rom and unlock so you can keep going until you ca load WM6.1.
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
I've had many, many problems over the last 3 days trying to do this. I completed it all in less than a day, but when I used the phone it had terrible reception. I completely downgraded everything back to square one. Still bad phone reception. I was about to through it out the window, when someone called my wife's cell phone and she also had bad reception. I then put my sim in another phone, same problem. Well, at&t has a tower down for the last 3 days. What timing, it seems to work when not at home, but hard to test that way Anyway, moral of the story is. Don't give up, keep plugging along.
Good luck.
I'm pretty sure imei checker is for SIM unlocking.
For G3 CID unlocking and upgrading read the stickies in http://forum.xda-developers.com/forumdisplay.php?f=289
If you can start your Wizard in bootloader, and it says "usb" in the lower-left, you can flash your original ROM. An active sync connection is not needed. Search for your carrier's ROM if you don't have it and I'd recommend the "no carrier ID" version of the RUU.
Have you tried a 'Hard Reset',hope it'll work,if it boots up into working OS and it already has IPL/SPL 1.xx,use lokiwiz02b tool to SIM/CID unlock the phone and than upgrade.
If it doesn't work still after Hard Reset,most probably,its Extended_Rom is corrupted,its required to reflash a new rom.
Activesync doesn't work in absence of a working OS and in Bootloaders mode.Its not required for flashing a rom.Just get the phone into Bootloaders and hook the phone with pc via usb cable and watch small usb appear at the bottom of the bootloader screen,if its there,it good to go and flash the rom.
ok so i downloaded the button rom finally but how do i flash it to my wizard.
Get your phone in Bootloaders,hook up the phone with pc via usb,watch small usb appear at the bottom of the Bootloader screen,if its there run the 'RUU' application,it'll start to flash,it stops at a certain percentage,don't get worried and do anything,after a couple of minutes it starts again,let it complete 100%,the phone'll restart and boot up in new OS.
which ruu application. I jst downloaded 1 which comes in the form of a rar file saying ruuwrapper. is that the right 1
So after lots and lots and lots more reading i realized i dont need a ruu. all i need to do is get into bootloader mode plug in the usb and run the wizard button rom. It worked perfectly my wizard is back to life yip pee.
Anyway i wud jst like to thank u guys for all the help and compliment u guys on a gr8 forum.
Now my next challenge is wm6 with touch flo.
Hi all,
I have a iMate SP3 here that I'm trying to get working for a coworker. Long story short they did this once before and I re-flashed it with some ROM (no clue which one) to get it working. Well, they broke it again and it's at the bootloader screen.
Problem is, I have no clue what CID lock is on the phone. The SPL is 1.01.0107 and I can't really find any mention of it. The phone doesn't boot any further than the bootloader screen and needs to be flashed, but I'm not sure with what. So far it's rejected all the ROMs I've tried.
Info 2 in MTTY gives me the output below:
HTCSCDL___01 4š«@HTCE
Can anyone tell me what I can flash this phone with to get something booting on it again? Thanks
please visit ftp://ftp.clubimate.com
choose the appropriate rom for you
So I have the bootloader unlock code but I cannot connect my phone to any PC (it doesn't work somehow. Frustrating , YES!!). All I am looking for is a way to unlock my bootloader. My phone is L29C185B582 Non rooted and locked (it was unlocked earlier but after updating, It got locked again). Is there a way to somehow unlock bootloader and install TWRP (my wifi works, will that help?) ?
My problem in detail is at https://forum.xda-developers.com/android/help/android-stuck-charging-mode-connection-t3706199
Any help would be appreciated. Will even buy a few beers if someone can help me fix this.
if u fixed problem please tell us how u fixed this problem
because i have this problem too
and i cant find any thing can help me for my problem