Related
Q&A for [port]z3 xperience rom note 4g cm11
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [port]z3 xperience rom note 4g cm11. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
nice share port rom ,,bug ngko golei breng2
Awesome..
Might put a link to the rom cm11, and since this does not work shine.
http://forum.xda-developers.com/redmi-note/development/dior-cyanogenmod-11-redmi-note-4g-lte-t2994580
thank you very much ...
wow.. nice development.. since im like to use sony like cusrom.. but im a redmi note 3g user.. may i get for the note 3g?
johanarif93 said:
wow.. nice development.. since im like to use sony like cusrom.. but im a redmi note 3g user.. may i get for the note 3g?
Click to expand...
Click to collapse
delete build.prop and flash on cm11 and see booting or not and first make backup
yash989 said:
delete build.prop and flash on cm11 and see booting or not and first make backup
Click to expand...
Click to collapse
is it compatible to twrp?
johanarif93 said:
is it compatible to twrp?
Click to expand...
Click to collapse
ya
Wich rom cm you used to flash the rom correctly?
jesusl12 said:
Wich rom cm you used to flash the rom correctly?
Click to expand...
Click to collapse
http://forum.xda-developers.com/red...ior-cyanogenmod-11-redmi-note-4g-lte-t2994580
Not Working for me too Stuck at cyanogenmod boot logo
I am using the cyanogen Mod from the following link
http://forum.xda-developers.com/redmi-note/development/dior-cyanogenmod-11-redmi-note-4g-lte-t2994580
I am having CWM philz touch recovery.
I do the factory, reset, then, clear cache and clear dalvik cache, then doing Clean to install a new Rom.
After that flashing CM11 from above link and Gapps, Whenn I tried booting it goes inside CM11 and everything is great.
Then to recovery and installed Xperia Rom and after that FC.zip.
But Sadly after this it goes to CyanogenMod Boot logo anf never advances.
Am I missing anything here. ..??
Finally its was able to flash z3rom after lot of trying. I was also stuck at cynogen boot logo many times then I tried this
1. install cm11
2.reboot system
3Install cynogen
4. wife data,cache...
5flash z3 rom
6 reboot
7. flash fc fix
8 install gapps
9. reboot
Is don't know how but this worked for me.
itsmeasik said:
I am using the cyanogen Mod from the following link
http://forum.xda-developers.com/red...ior-cyanogenmod-11-redmi-note-4g-lte-t2994580
I am having CWM philz touch recovery.
I do the factory, reset, then, clear cache and clear dalvik cache, then doing Clean to install a new Rom.
After that flashing CM11 from above link and Gapps, Whenn I tried booting it goes inside CM11 and everything is great.
Then to recovery and installed Xperia Rom and after that FC.zip.
But Sadly after this it goes to CyanogenMod Boot logo anf never advances.
Am I missing anything here. ..??
Click to expand...
Click to collapse
flash cm11
reboot
flash gapps
reboot
flash rom
reboot
flash fc fix
and see
Awesome! Thank
Brighness and headset not working please fix bugs
yash989 said:
flash cm11
reboot
flash gapps
reboot
flash rom
reboot
flash fc fix
and see
Click to expand...
Click to collapse
Try installing gapps at last it worked for me
Chinese Keyboard
Hi...it this Z3 ROM support for "Xperia Chinese Keyboard"?
Thank you...and it was a amazing ROM if that support for chinese keyboard
How to disable or remove navigation bar from screen...
z3 xperience rom note 4g cm11
Here the below error was occurred after flashing this rom.... unfortunately, play store services has been stopped ...so plz fix for this...
thank u...PAVAN
brightness not working
Hey guys i recently flashed z3 rom sucessfully but i have one problem noticed. The brightness control is not working. I tried to dim the brightness of rom but failed to do. And my phone is heating when screen is on. Do any one has solutioisto this problem . I have not tested headphone so i dont know about headphone bug. And this rom is Really nice.
---------- Post added at 11:10 AM ---------- Previous post was at 11:07 AM ----------
sushantsaurav2010 said:
How to disable or remove navigation bar from screen...
Click to expand...
Click to collapse
You can use this build.prop tweak "qemu.hw.mainkeys=1" to disable navbar. Just copy the syntax and paste it to build.prop file in system.
hey, its not working in my xiaomi red mi note 4 g. after flashing z3 rom and fc fix when i reboot it given me error as unfortunately com.android stopped working and install boot also stopped working. no home screen totaly blank screen.
and what is cm 11. is it cwm zip
Hey guys,
I know that CameraNext Modded v22 is a great camera app, I used it on my OnePlus One. Now I have OP2 Oxygen 2.1.2 Rooted, with AK Kernel, and the thing is that I installed this app from here: http://forum.xda-developers.com/oneplus-one/themes-apps/app-cameranext-modded-t2999275
but it does not work for me. As soon as I open an app, it opens and closes immediatelly... Any ideas how to get this work?...
I wanted to instal CyanoGen Mod, but the thing is that the latest cyanogen for OP2 does not support fingerprint sensor, laser focus and so... (or maybe my knowledge are too old...?)
Thnks for help, everyone!
That's the old version for CM11... try with this version : http://forum.xda-developers.com/oneplus-one/themes-apps/app-cos12-cameranextmod-t3086513
Very Nice, Thanks!!!! I have tried to find Clear Image mode to try capture 50MP image, but I was not able to find this mode. Any ideas? THANKS AGAIN!!!!!
P.S., I also have triec ColorOS Camera, step by step using this guide http://www.theoneplustwo.com/oneplu...era-take-50-megapixel-photos-from-your-phone/ but the thing is that when installing “OppoCamMod – Version B.apk” I get an error like "Parse Error: There was a problem parsing the package."
Any ideas about this one...? All help is appreciated!!!!
Sorry, can't help you on this...
LGZACRO said:
P.S., I also have triec ColorOS Camera, step by step using this guide http://www.theoneplustwo.com/oneplu...era-take-50-megapixel-photos-from-your-phone/ but the thing is that when installing “OppoCamMod – Version B.apk” I get an error like "Parse Error: There was a problem parsing the package."
Any ideas about this one...? All help is appreciated!!!!
Click to expand...
Click to collapse
Color os camera don't work on oneplus 2. That mod only works on oneplus one.
Sent from my ONE A2003 using Tapatalk
LGZACRO said:
Very Nice, Thanks!!!! I have tried to find Clear Image mode to try capture 50MP image, but I was not able to find this mode. Any ideas? THANKS AGAIN!!!!!
Click to expand...
Click to collapse
If you want clear image, try the Hydrogen OS Camera.
Hi folks,
It seems that a dev from the Oneplus forum, PMehra, managed to get OOS 3.1.0 working on our beloved OPO
He also made a OPX H2OS v2 port, though the official one is out.
Actually there are two OOS 3 ports that was made by two different dev (the other one is on Oneplus chinese forum) at the same time (almost) !
These are ports from the OPX 3.1.0 update dated of 08/18.
I've only tested the PMehra OOS 3 port.
What's working :
Almost everything is working, including NFC
Known bugs :
Mobile network take little bit more time (actually, it's insignificant), switch flight mode on & off after boot. Expected to improve in next update.
Longpress actions doesn't work on any button. Expected to be fixed in next update.
When the software buttons are turned on, the hardware buttons stay active and can also be used. So stay with HW buttons for now.
You can't change priority/no notifications due to there being no alert slider.
Download app fc
Storage->explore->doesnt do anything
Storage->other-> settings fcs
Changelogs :
Soon
How to flash :
Reboot to recovery
Make a nandroid backup
Wipe cache/dalvik/data/system partitions
Flash the zip
Reboot and enjoy !
If you want to install another rom after this one, you have to flash a marshmallow modem from this thread before, or you'll be stuck at boot logo.
Gapps are included into the rom.
Downloads :
Mega folder with full rom and OTA.
Full rom on Google drive.
Don't worry if winrar say that the .zip is corrupt, it work anyway.
Root :
Flash these two .zip in this order :
Magisk V6
Magisk Super Su 2.76
Custom Kernels :
You can use a H2OS or OPX kernel on this rom, though no OPX kernel has been updated to OOS 3 yet because Oneplus didn't release any sources, as the original update isn't official, but just a community build.
Quick review :
Use it for few hours now, and everything work well, it's smooth like butter
The camera app is the stock OOSone, and it don't support 4K recording, but the manual mode work well, and the "HQ" mode delivers nice shots.
Battery is good : about 4-5 hours SOT on average.
There is no slow charging issue.
Here a video of the installation and quick review of the rom thanks to @acervenky :
Source & Credits :
Oneplus topic OOS 3.x
Big thanks to @pradeepsmehra who made the port, thanks to him :good:
Big thanks to @Dhairya for testing and bug fixing :good:
Thanks also to all the testers :good:
thank u m8! will try it
icyeye said:
thank u m8! will try it
Click to expand...
Click to collapse
No problem a feedback would be great , and can you test the zip with winrar ? cause it say me that the .zip is corrupt, while it work in twrp.
could port camera for cm13 functional 100% ??????
gazorby said:
No problem a feedback would be great , and can you test the zip with winrar ? cause it say me that the .zip is corrupt, while it work in twrp.
Click to expand...
Click to collapse
It also says to me that is corrupt.
Flashed the rom without problem and its working perfect!
fedesandor said:
It also says to me that is corrupt.
Flashed the rom without problem and its working perfect!
Click to expand...
Click to collapse
Ok, thank you, i'll add it in the first post
I havent flashed the ROM but it says 3.0.1 in both Mega and GDrive but Screenshots say 3.1.0. Can you confirm what version is it??
btw, after trying to flash any other ROM, or restore backup...after this one... i can't do it any more. i am stuck at opo logo. any solution or idea why is it like that?
SaurabhMumbaiOneS said:
I havent flashed the ROM but it says 3.0.1 in both Mega and GDrive but Screenshots say 3.1.0. Can you confirm what version is it??
Click to expand...
Click to collapse
It's 3.1.0
icyeye said:
btw, after trying to flash any other ROM, or restore backup...after this one... i can't do it any more. i am stuck at opo logo. any solution or idea why is it like that?
Click to expand...
Click to collapse
Maybe it's the modem. Try flashing a mm modem from this thread before flashing your rom. Tell me if it works.
gazorby said:
Maybe it's the modem. Try flashing a mm modem from this thread before flashing your rom. Tell me if it works.
Click to expand...
Click to collapse
yup... it was modem. ty
icyeye said:
yup... it was modem. ty
Click to expand...
Click to collapse
Will add it in the first post too
Well a lot of you might accuse me of living in a cave but will still go ahead and ask my question
Apart from the camera quality what are the other benefits of using this ROM over say a cm or other stock roms? I am currently on hydrogen ROM purely for the sake of trying a new look.
dev.meena said:
Well a lot of you might accuse me of living in a cave but will still go ahead and ask my question
Apart from the camera quality what are the other benefits of using this ROM over say a cm or other stock roms? I am currently on hydrogen ROM purely for the sake of trying a new look.
Click to expand...
Click to collapse
i Flashed the rom yesterday. so far everything seems to be fine. i will report about the battery. no significant drain in last 12 hours!
---------- Post added at 06:56 AM ---------- Previous post was at 06:51 AM ----------
gazorby said:
Hi folks,
It seems that a dev from the Oneplus forum, PMehra, managed to get OOS 3.1.0 working on our beloved OPO
He also made a OPX H2OS v2 port, though the official one is out.
Click to expand...
Click to collapse
Could you please share the link for official H2OS?
igni.selvaraj said:
i Flashed the rom yesterday. so far everything seems to be fine. i will report about the battery. no significant drain in last 12 hours!
---------- Post added at 06:56 AM ---------- Previous post was at 06:51 AM ----------
Could you please share the link for official H2OS?
Click to expand...
Click to collapse
Direct download link
gazorby said:
Direct download link
Click to expand...
Click to collapse
Thank you!
Hardware buttons buggy
There's a few bugs with the hardware buttons that I've come across. Firstly being that no long press/double tap gestures work, and secondly when the software buttons are turned on the hardware buttons stay active and can also be used. While they're only minor bugs, they can be a bit annoying to deal with
---------- Post added at 01:26 PM ---------- Previous post was at 01:17 PM ----------
Also, another bug is that you can't change priority/no notifications due to there being no alert slider. Will edit this post if I find any other bugs.
derekokelly said:
There's a few bugs with the hardware buttons that I've come across. Firstly being that no long press/double tap gestures work, and secondly when the software buttons are turned on the hardware buttons stay active and can also be used. While they're only minor bugs, they can be a bit annoying to deal with
---------- Post added at 01:26 PM ---------- Previous post was at 01:17 PM ----------
Also, another bug is that you can't change priority/no notifications due to there being no alert slider. Will edit this post if I find any other bugs.
Click to expand...
Click to collapse
Thanks for bug report, will ad it in OP
Hi, which firmware should I flash to install cyanogenmod 13 or 14? Thanks in advance
Have you tried a different camera app than the stock one to try record 4k? For example: Bacon Camera, ColorOS Camera.
Hi everyone,
I used to own a i9100 many years ago and was a developer back then, anyway it's good to see the phone is alive and kicking!
I built my own ROM which is clean aosp (untouched settings and most of base with only commits needed to build for non google devices) with pixel theme,
I want to test it but can't, I need 2 or 3 people who would want to test the alpha build and let me know if it works and send me screenshots,
again, this rom is clean aosp focused and performance, battery and getting that clean google pixel experience without the bloat some roms have, also I update it as soon as the security update comes out since there isn't many commits like other roms.
PM me please if your serious about testing.
Link to the main thread: Here
Well since no one has answered, ill just leave a link for testers here
Not responsible for any issues of course
Please comment with a screenshot and a detailed list of issues
sooti said:
Well since no one has answered, ill just leave a link for testers here
Not responsible for any issues of course
Please comment with a screenshot and a detailed list of issues
Click to expand...
Click to collapse
Nice to have you back as a developer and thank you for this rom.
pity at the moment i do not have a spare-device for testing.
but will have a go on it as soon as possible.
Sent from my ME173X using XDA-Developers Legacy app
sooti said:
Well since no one has answered, ill just leave a link for testers here
Not responsible for any issues of course
Please comment with a screenshot and a detailed list of issues
Click to expand...
Click to collapse
I downloaded rom tomorrow i will flash and i will report..
Flashed and rom works very well, is fast,smooth , just need permissive kernel to flash supersu systemmode to get root..
bujjo53 said:
Flashed and rom works very well, is fast,smooth , just need permissive kernel to flash supersu systemmode to get root..
Click to expand...
Click to collapse
Gotcha, what about ril?
EDIT: I did set the kernel to permissive.. root should work, try flashing magisk 13.0
sooti said:
Gotcha, what about ril?
EDIT: I did set the kernel to permissive.. root should work, try flashing magisk 13.0
Click to expand...
Click to collapse
Magisk not working on our device ?
---------- Post added at 12:08 PM ---------- Previous post was at 11:58 AM ----------
Can you upload build with permissive kernel , i will test root with supersu systemmode
bujjo53 said:
Magisk not working on our device ?
---------- Post added at 12:08 PM ---------- Previous post was at 11:58 AM ----------
Can you upload build with permissive kernel , i will test root with supersu systemmode
Click to expand...
Click to collapse
Kernel is set to permissive already , I checked
sooti said:
Kernel is set to permissive already , I checked
Click to expand...
Click to collapse
I flashed supersu systemmode but bootloop.
Tried to test your ROM. Downloaded it, did a clean wipe installed it after ][7.1.2_r17][OMS][i9100] XenonHD 7.1. Get sutck on install at step "patchjng", waiting at least 30mn then i get back to restore Xenon. Sorry guys.
islander999 said:
Tried to test your ROM. Downloaded it, did a clean wipe installed it after ][7.1.2_r17][OMS][i9100] XenonHD 7.1. Get sutck on install at step "patchjng", waiting at least 30mn then i get back to restore Xenon. Sorry guys.
Click to expand...
Click to collapse
I think your downloaded file is corrupted try download again .. Then flash
bujjo53 said:
I think your downloaded file is corrupted try download again .. Then flash
Click to expand...
Click to collapse
Noops cannot go back to recovery... Stuck there on logo or the only choice i see is to go to dowload mod but then ...?
I want to be a candidate @sooti! I sent a message to the private. Take a look
@sooti: well, after 12 hours of use, i noticed some things:
1. I can not install apps outside of google play even when I enable the Unknown sources option.
2. App notifications are always blank and you can not read what has been alerted.
3. Aesthetic: adjust the logo of initialization. gets too big.
4. Remove the installation of magisk when flashing, as it does not work on device and leave the system with the root already activated =)
5. 'MTP was stopped'. Whenever I open the files or connect the device to the notebook and disconnect the message persists.
6. Admin mode can not be enabled by other launchers.
7. Aesthetic: Adjust the size of the watch. Ex: When it is at 11:30 AM / PM, AM / PM goes from the screen.
8. Filming mode when clicking (+) on the instagram doesn't work, even with all the permissions enabled. The rest works very well.
9. Speech recognition does not work with 'ok google'. Using the Google assistant works fine. I even talk to her when I feel lonely. :rir:
10. Call recording not working same habiliting the permission.
11. The device was restarted 2 times on its own and ran out of the signal from the service provider. The signal only returned after the device restarts manually.
EDIT: 12: The phone only charges when it is switched on or in recovery mode (TWRP). If turned off, it turns on and enters the TWRP to load.
'Forgetting' these 12 problems, the rest works very well!
They will tell you that it is a lie, but the battery lasted 4 hours and 45 minutes using it intensely. Can you explain the magic to me, since with others, they last between 3 to 4 hours and 30 minutes? I'll send you pictures when use intensely again to prove it.
Link logcat to help: https://drive.google.com/open?id=0B1JkdXiGh6MhZmZhQzZEeGxhdkk (XDA limit 500kb per file)
Sorry for my bad english
As seen in this thread on the main Treble dev forum, there is a move to separate the Treble development out so each device can have it's own forum. In order to get this moving, here's a place to discuss how project Treble has been working on your P10.
This should go without saying, but make sure you take a FULL BACKUP using TWRP and a FULL BACKUP of your Internal Storage copied to a PC before trying any of these ROMS!
Main Links to Phh's Treble Builds (including installation instructions)
-----------------------------------------------------------------------------------------------
AOSP - The main development port of the Android Open Source Project.
LineageOS - What used to be called CyanogenOS. More tweaks than AOSP. Often abbreviated to LOS.
ResurrectionRemix - Even more tweaks than LOS.
Ressurection Remix (Official) - And official release from the RR team!
Stock Huawei Camera - So you can reanable the stock dual-lens camera once a Treble build is installed.
TWRP
-----------------------------------------------------------------------------------------------
TWRP 3.2.1-0 for P10 v0.1 [Link to post from Pretoriano80] - tested backup/restore of stock 8.0.0 Huawei ROM
TWRP 3.2.1-0 for P10 Plus [Link to thread from blackball] - This may be better for 8.1-based ROMs.
Current Bugs [Updated 2018-05-06]
-----------------------------------------------------------------------------------------------
[RR - Official] [2018-07-16]
- No WiFi calling
[RR] [2018-05-06] [actinhic]
- RR from phh is almost perfect, only BT is reluctant...
[AOSP] [2018-04-24] [hamuts]
- Eye comfort did not work.
- Auto-brightness did not work. That wasn't the main problem, but I could live with that as long as I can see anything at all .
- Google Apps did not work. This was the real dealbraker. At first I couldn't download *any* app from Google Play Store. I tried factory reset (twice) and still no luck. Then after a night I tried to download and it downloaded (I went to Google site where you can white-list your device) but when I tried to open any app that I've downloaded they crashed. Anything that was somehow attached to Google services didn't work.
Returning to Official Stock Firmware
-----------------------------------------------------------------------------------------------
1. Boot into the bootloader and install Pretoriano's TWRP
2. Use the full "format data" option in TWRP
3. Use the script provided by Jannomag to install the same official firmware (Full-OTA) you have a TWRP backup for.
4. The stock firmware should boot correctly. You can use this if you didn't have a TWRP backup.
5. Boot into the bootloader again and install Pretoriano's TWRP for a second time
6. Restore your TWRP backup
7. Your previous Huawei stock firmware will now boot correctly.
Friend have you already installed any of these roms in huawei p10?
I've tried the LineageOS rom. It's stable but not perfect. It lacks auto brightness and that was a deal breaker for me.
AlmightyTritan said:
I've tried the LineageOS rom. It's stable but not perfect. It lacks auto brightness and that was a deal breaker for me.
Click to expand...
Click to collapse
Can you tell me how to install the rom?
DarkPJV said:
Can you tell me how to install the rom?
Click to expand...
Click to collapse
No, but I can link you to a really nice guide! https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
AlmightyTritan said:
No, but I can link you to a really nice guide! https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
Click to expand...
Click to collapse
But you know how to return to stock rom. To be sure of being able to return if something goes wrong
DarkPJV said:
But you know how to return to stock rom. To be sure of being able to return if something goes wrong
Click to expand...
Click to collapse
I just made a backup with TWRP and restored to it.
No
AlmightyTritan said:
I just made a backup with TWRP and restored to it.
Click to expand...
Click to collapse
Thanks friend I will install linage 15.1. question the rom works with fast charge as in stock And if any TWRP works in linageOS 15.1 . Sorry for so many questions
The main reason for me for using EMUI is the home button. I love it how Huawei got it working with these gestures and don't want to miss it.
I tried Lineage a few weeks ago but even with gestures apps it wasn't really a great experience. It would be nice if someone get this feature for AOSP.
Hi. How can I restore my p10 if I have a problem with the rom!?
friends someone knows how to install the gapps to this rom linageOS 15.1.help
Hi there. there is something i would like to know. i have a huawei p10 frd-l09 and i know it's treble supported. has anyone tried aosp 8.1 GSI on this model? if so, how does it run? does everything work just fine? is it stable enough for daily use? thanks.
GBTEK said:
Hi there. there is something i would like to know. i have a huawei p10 frd-l09 and i know it's treble supported. has anyone tried aosp 8.1 GSI on this model? if so, how does it run? does everything work just fine? is it stable enough for daily use? thanks.
Click to expand...
Click to collapse
I will try project treble tonight on my VTR-L29 huawei p10. Will come back with impressions.
Hopefully its easy to go back to EMUI after.
---------- Post added at 09:11 PM ---------- Previous post was at 09:08 PM ----------
Jannomag said:
The main reason for me for using EMUI is the home button. I love it how Huawei got it working with these gestures and don't want to miss it.
I tried Lineage a few weeks ago but even with gestures apps it wasn't really a great experience. It would be nice if someone get this feature for AOSP.
Click to expand...
Click to collapse
You could just use x home bar app from play store and get rid of nav bar keys.
GBTEK said:
Hi there. there is something i would like to know. i have a huawei p10 frd-l09 and i know it's treble supported. has anyone tried aosp 8.1 GSI on this model? if so, how does it run? does everything work just fine? is it stable enough for daily use? thanks.
Click to expand...
Click to collapse
FRD-L09 isn't a P10, it's a Honor 8 and XDA has forums for hits, too.
Don't know where you got the info fro. that you've a P10 - it hasn't even the same processor so the development is different for this phone even with treble.
I've tried the AOSP version 8.1 of phh-treble on my P10 (VTR-L29C432). It was overall great, snapy, clean and almost everything worked. I missed Huawei Camera app, but I clould live without it. Coulnd't test LED notification.
There was couple problems that I encounter:
- Eye comfort did not work.
- Auto-brightness did not work. That wasn't the main problem, but I could live with that as long as I can see anything at all .
- Google Apps did not work. This was the real dealbraker. At first I couldn't download *any* app from Google Play Store. I tried factory reset (twice) and still no luck. Then after a night I tried to download and it downloaded (I went to Google site where you can white-list your device) but when I tried to open any app that I've downloaded they crashed. Anything that was somehow attached to Google services didn't work.
At that point I gave up and restored my device to factory image (that also was a wild ride, but I'll leave it for another day).
Try RR remix rom great working p10!
https://forum.xda-developers.com/honor-view-10/development/rom-t3753555
Jannomag said:
FRD-L09 isn't a P10, it's a Honor 8 and XDA has forums for hits, too.
Don't know where you got the info fro. that you've a P10 - it hasn't even the same processor so the development is different for this phone even with treble.
Click to expand...
Click to collapse
sorry i meant vtr-l09
---------- Post added at 03:42 PM ---------- Previous post was at 03:37 PM ----------
hamuts said:
I've tried the AOSP version 8.1 of phh-treble on my P10 (VTR-L29C432). It was overall great, snapy, clean and almost everything worked. I missed Huawei Camera app, but I clould live without it. Coulnd't test LED notification.
There was couple problems that I encounter:
- Eye comfort did not work.
- Auto-brightness did not work. That wasn't the main problem, but I could live with that as long as I can see anything at all .
- Google Apps did not work. This was the real dealbraker. At first I couldn't download *any* app from Google Play Store. I tried factory reset (twice) and still no luck. Then after a night I tried to download and it downloaded (I went to Google site where you can white-list your device) but when I tried to open any app that I've downloaded they crashed. Anything that was somehow attached to Google services didn't work.
At that point I gave up and restored my device to factory image (that also was a wild ride, but I'll leave it for another day).
Click to expand...
Click to collapse
what a shame, i was hoping it would be usable but for the google apps, not working, it's a dealbreaker for me as well as i heavily rely on google services were you using the latest build of aosp with google apps pre-installed or you just tried the build without them? were you using the a-partition compatible build? thanks.
GBTEK said:
sorry i meant vtr-l09
---------- Post added at 03:42 PM ---------- Previous post was at 03:37 PM ----------
what a shame, i was hoping it would be usable but for the google apps, not working, it's a dealbreaker for me as well as i heavily rely on google services were you using the latest build of aosp with google apps pre-installed or you just tried the build without them? were you using the a-partition compatible build? thanks.
Click to expand...
Click to collapse
Well, I used AOSP with Google Apps preinstalled. Yes, I used A-partition compatible build since Huawei P10 A-partition only. I suppose that there was something wrong with that build, but I didn't want to flash TWRP since I didn't have access to stock eRecovery to revert back to stock.
hamuts said:
At that point I gave up and restored my device to factory image (that also was a wild ride, but I'll leave it for another day).
Click to expand...
Click to collapse
Could you share with us how did you manage to restore back to stock Oreo after trying this project. I'm facing issues flashing back stock files and was wondering if you could give me some advice. My e-recovery is not restoring files it just gives me error. restoring with twrp not working either. my fastboot is working and i have FRP Unlock if that is any help to you. im stuck with vanilla os without gapps. flashing just gapps gives me error with wrong version of os. it suggest it should be 7.1.2 package. my previous version of os was VTR-L29432c365.
thanks for any advice
maly82 said:
Could you share with us how did you manage to restore back to stock Oreo after trying this project. I'm facing issues flashing back stock files and was wondering if you could give me some advice. My e-recovery is not restoring files it just gives me error. restoring with twrp not working either. my fastboot is working and i have FRP Unlock if that is any help to you. im stuck with vanilla os without gapps. flashing just gapps gives me error with wrong version of os. it suggest it should be 7.1.2 package. my previous version of os was VTR-L29432c365.
thanks for any advice
Click to expand...
Click to collapse
It's a bit complicated with Huawei compared to other device as it doesn't come with any software that just resets the device back to its original state.
What you have to do is to download the firmware for the device manually (the full one) and flash it manually by adding it to a dload directory on your SD card. Just search Google on how to flash oreo with dload and you should find some tutorials.
Hope it helps