As seen in this thread on the main Treble dev forum, there is a move to separate the Treble development out so each device can have it's own forum. In order to get this moving, here's a place to discuss how project Treble has been working on your P10.
This should go without saying, but make sure you take a FULL BACKUP using TWRP and a FULL BACKUP of your Internal Storage copied to a PC before trying any of these ROMS!
Main Links to Phh's Treble Builds (including installation instructions)
-----------------------------------------------------------------------------------------------
AOSP - The main development port of the Android Open Source Project.
LineageOS - What used to be called CyanogenOS. More tweaks than AOSP. Often abbreviated to LOS.
ResurrectionRemix - Even more tweaks than LOS.
Ressurection Remix (Official) - And official release from the RR team!
Stock Huawei Camera - So you can reanable the stock dual-lens camera once a Treble build is installed.
TWRP
-----------------------------------------------------------------------------------------------
TWRP 3.2.1-0 for P10 v0.1 [Link to post from Pretoriano80] - tested backup/restore of stock 8.0.0 Huawei ROM
TWRP 3.2.1-0 for P10 Plus [Link to thread from blackball] - This may be better for 8.1-based ROMs.
Current Bugs [Updated 2018-05-06]
-----------------------------------------------------------------------------------------------
[RR - Official] [2018-07-16]
- No WiFi calling
[RR] [2018-05-06] [actinhic]
- RR from phh is almost perfect, only BT is reluctant...
[AOSP] [2018-04-24] [hamuts]
- Eye comfort did not work.
- Auto-brightness did not work. That wasn't the main problem, but I could live with that as long as I can see anything at all .
- Google Apps did not work. This was the real dealbraker. At first I couldn't download *any* app from Google Play Store. I tried factory reset (twice) and still no luck. Then after a night I tried to download and it downloaded (I went to Google site where you can white-list your device) but when I tried to open any app that I've downloaded they crashed. Anything that was somehow attached to Google services didn't work.
Returning to Official Stock Firmware
-----------------------------------------------------------------------------------------------
1. Boot into the bootloader and install Pretoriano's TWRP
2. Use the full "format data" option in TWRP
3. Use the script provided by Jannomag to install the same official firmware (Full-OTA) you have a TWRP backup for.
4. The stock firmware should boot correctly. You can use this if you didn't have a TWRP backup.
5. Boot into the bootloader again and install Pretoriano's TWRP for a second time
6. Restore your TWRP backup
7. Your previous Huawei stock firmware will now boot correctly.
Friend have you already installed any of these roms in huawei p10?
I've tried the LineageOS rom. It's stable but not perfect. It lacks auto brightness and that was a deal breaker for me.
AlmightyTritan said:
I've tried the LineageOS rom. It's stable but not perfect. It lacks auto brightness and that was a deal breaker for me.
Click to expand...
Click to collapse
Can you tell me how to install the rom?
DarkPJV said:
Can you tell me how to install the rom?
Click to expand...
Click to collapse
No, but I can link you to a really nice guide! https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
AlmightyTritan said:
No, but I can link you to a really nice guide! https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
Click to expand...
Click to collapse
But you know how to return to stock rom. To be sure of being able to return if something goes wrong
DarkPJV said:
But you know how to return to stock rom. To be sure of being able to return if something goes wrong
Click to expand...
Click to collapse
I just made a backup with TWRP and restored to it.
No
AlmightyTritan said:
I just made a backup with TWRP and restored to it.
Click to expand...
Click to collapse
Thanks friend I will install linage 15.1. question the rom works with fast charge as in stock And if any TWRP works in linageOS 15.1 . Sorry for so many questions
The main reason for me for using EMUI is the home button. I love it how Huawei got it working with these gestures and don't want to miss it.
I tried Lineage a few weeks ago but even with gestures apps it wasn't really a great experience. It would be nice if someone get this feature for AOSP.
Hi. How can I restore my p10 if I have a problem with the rom!?
friends someone knows how to install the gapps to this rom linageOS 15.1.help
Hi there. there is something i would like to know. i have a huawei p10 frd-l09 and i know it's treble supported. has anyone tried aosp 8.1 GSI on this model? if so, how does it run? does everything work just fine? is it stable enough for daily use? thanks.
GBTEK said:
Hi there. there is something i would like to know. i have a huawei p10 frd-l09 and i know it's treble supported. has anyone tried aosp 8.1 GSI on this model? if so, how does it run? does everything work just fine? is it stable enough for daily use? thanks.
Click to expand...
Click to collapse
I will try project treble tonight on my VTR-L29 huawei p10. Will come back with impressions.
Hopefully its easy to go back to EMUI after.
---------- Post added at 09:11 PM ---------- Previous post was at 09:08 PM ----------
Jannomag said:
The main reason for me for using EMUI is the home button. I love it how Huawei got it working with these gestures and don't want to miss it.
I tried Lineage a few weeks ago but even with gestures apps it wasn't really a great experience. It would be nice if someone get this feature for AOSP.
Click to expand...
Click to collapse
You could just use x home bar app from play store and get rid of nav bar keys.
GBTEK said:
Hi there. there is something i would like to know. i have a huawei p10 frd-l09 and i know it's treble supported. has anyone tried aosp 8.1 GSI on this model? if so, how does it run? does everything work just fine? is it stable enough for daily use? thanks.
Click to expand...
Click to collapse
FRD-L09 isn't a P10, it's a Honor 8 and XDA has forums for hits, too.
Don't know where you got the info fro. that you've a P10 - it hasn't even the same processor so the development is different for this phone even with treble.
I've tried the AOSP version 8.1 of phh-treble on my P10 (VTR-L29C432). It was overall great, snapy, clean and almost everything worked. I missed Huawei Camera app, but I clould live without it. Coulnd't test LED notification.
There was couple problems that I encounter:
- Eye comfort did not work.
- Auto-brightness did not work. That wasn't the main problem, but I could live with that as long as I can see anything at all .
- Google Apps did not work. This was the real dealbraker. At first I couldn't download *any* app from Google Play Store. I tried factory reset (twice) and still no luck. Then after a night I tried to download and it downloaded (I went to Google site where you can white-list your device) but when I tried to open any app that I've downloaded they crashed. Anything that was somehow attached to Google services didn't work.
At that point I gave up and restored my device to factory image (that also was a wild ride, but I'll leave it for another day).
Try RR remix rom great working p10!
https://forum.xda-developers.com/honor-view-10/development/rom-t3753555
Jannomag said:
FRD-L09 isn't a P10, it's a Honor 8 and XDA has forums for hits, too.
Don't know where you got the info fro. that you've a P10 - it hasn't even the same processor so the development is different for this phone even with treble.
Click to expand...
Click to collapse
sorry i meant vtr-l09
---------- Post added at 03:42 PM ---------- Previous post was at 03:37 PM ----------
hamuts said:
I've tried the AOSP version 8.1 of phh-treble on my P10 (VTR-L29C432). It was overall great, snapy, clean and almost everything worked. I missed Huawei Camera app, but I clould live without it. Coulnd't test LED notification.
There was couple problems that I encounter:
- Eye comfort did not work.
- Auto-brightness did not work. That wasn't the main problem, but I could live with that as long as I can see anything at all .
- Google Apps did not work. This was the real dealbraker. At first I couldn't download *any* app from Google Play Store. I tried factory reset (twice) and still no luck. Then after a night I tried to download and it downloaded (I went to Google site where you can white-list your device) but when I tried to open any app that I've downloaded they crashed. Anything that was somehow attached to Google services didn't work.
At that point I gave up and restored my device to factory image (that also was a wild ride, but I'll leave it for another day).
Click to expand...
Click to collapse
what a shame, i was hoping it would be usable but for the google apps, not working, it's a dealbreaker for me as well as i heavily rely on google services were you using the latest build of aosp with google apps pre-installed or you just tried the build without them? were you using the a-partition compatible build? thanks.
GBTEK said:
sorry i meant vtr-l09
---------- Post added at 03:42 PM ---------- Previous post was at 03:37 PM ----------
what a shame, i was hoping it would be usable but for the google apps, not working, it's a dealbreaker for me as well as i heavily rely on google services were you using the latest build of aosp with google apps pre-installed or you just tried the build without them? were you using the a-partition compatible build? thanks.
Click to expand...
Click to collapse
Well, I used AOSP with Google Apps preinstalled. Yes, I used A-partition compatible build since Huawei P10 A-partition only. I suppose that there was something wrong with that build, but I didn't want to flash TWRP since I didn't have access to stock eRecovery to revert back to stock.
hamuts said:
At that point I gave up and restored my device to factory image (that also was a wild ride, but I'll leave it for another day).
Click to expand...
Click to collapse
Could you share with us how did you manage to restore back to stock Oreo after trying this project. I'm facing issues flashing back stock files and was wondering if you could give me some advice. My e-recovery is not restoring files it just gives me error. restoring with twrp not working either. my fastboot is working and i have FRP Unlock if that is any help to you. im stuck with vanilla os without gapps. flashing just gapps gives me error with wrong version of os. it suggest it should be 7.1.2 package. my previous version of os was VTR-L29432c365.
thanks for any advice
maly82 said:
Could you share with us how did you manage to restore back to stock Oreo after trying this project. I'm facing issues flashing back stock files and was wondering if you could give me some advice. My e-recovery is not restoring files it just gives me error. restoring with twrp not working either. my fastboot is working and i have FRP Unlock if that is any help to you. im stuck with vanilla os without gapps. flashing just gapps gives me error with wrong version of os. it suggest it should be 7.1.2 package. my previous version of os was VTR-L29432c365.
thanks for any advice
Click to expand...
Click to collapse
It's a bit complicated with Huawei compared to other device as it doesn't come with any software that just resets the device back to its original state.
What you have to do is to download the firmware for the device manually (the full one) and flash it manually by adding it to a dload directory on your SD card. Just search Google on how to flash oreo with dload and you should find some tutorials.
Hope it helps
Related
How about Lineage OS for Moto G4 Plus? Maybe do you know something ?
What?
Sent from my Moto G4 Plus using Tapatalk
Alejo2108 said:
How about Lineage OS for Moto G4 Plus? Maybe do you know something ?
Click to expand...
Click to collapse
Official announcement is there http://www.lineageosrom.com/2016/12/list-of-devices-getting-official.html
Unofficial announcement isn't there, but wip. Don't ask for eta.
Alejo2108 said:
How about Lineage OS for Moto G4 Plus? Maybe do you know something ?
Click to expand...
Click to collapse
I have built it for athene and it's working fine. Besides me, rahulsnair has also built the rom and he's gonna release it soon.
awesome news, looking forward to the rom
hell_lock said:
I have built it for athene and it's working fine. Besides me, rahulsnair has also built the rom and he's gonna release it soon.
Click to expand...
Click to collapse
Hi there. Good news, where can I get the download link? Thanks so much
Linage is released in regular an oms versions on ROM page
hazmatkid said:
Linage is released in regular an oms versions on ROM page
Click to expand...
Click to collapse
what is an oms version of a rom?
wbeckle said:
what is an oms version of a rom?
Click to expand...
Click to collapse
Oms is substratum ready
This ROM has one major bug gesture's don't work, when I do chop chop for flash on advanced settings crash instantly.
nithin mosco said:
This ROM has one major bug gesture's don't work, when I do chop chop for flash on advanced settings crash instantly.
Click to expand...
Click to collapse
Which rom? Chop chop works after a reboot.
Chop chop doesn't work at all no gestures work at all as soon as you try to use them advanced settings instantly crash and gesture doesn't work. On lineage os for moto g4 plus. I have rebooted many times and redone the install and still same issues.
nithin mosco said:
Chop chop doesn't work at all no gestures work at all as soon as you try to use them advanced settings instantly crash and gesture doesn't work. On lineage os for moto g4 plus. I have rebooted many times and redone the install and still same issues.
Click to expand...
Click to collapse
Please try the lineage oms build from Silesh.Nair and report.
That is the ROM I am using also new bugs have randomly appeared days into usage, all text from homepage icons and folders have suddenly disappeared even though they where working for the last few days, also advanced reboot setting have stopped working and nolonger display in the restart menu when they first did work and advanced settings still crashes, I have completely wiped the handset and all caches and redone the whole install process and it won't fix those issues they stay the same.
---------- Post added at 01:16 AM ---------- Previous post was at 01:15 AM ----------
I am re downloading the zip file Incase it was a dodgy download.
Fresh download hasn't helped still the same errors.
nithin mosco said:
Fresh download hasn't helped still the same errors.
Click to expand...
Click to collapse
You've downloaded the 13/01 build from here? https://drive.google.com/drive/folders/0B1ZbHDX3hq1yMzZaQThhbmphVEU
Also, did you wipe your system in TWRP before installing (so wiped Dalvik, cache, system and data, you can keep internal storage untouched)? Did you install Nougat before installing Lineage OS?
Yes
Yes it's the latest ROM file from that download location by that person. not sure if it was mm or N it's Android 7.1.1 know though not the greatest memory after my heart attack and being zapped alive 10 times.
Yes I did do a full wipe when installing I even did internal memory, one of the golden rules of Roms I was always taught.
---------- Post added at 01:19 AM ---------- Previous post was at 01:09 AM ----------
It seems to be a launcher problem, use the one that comes with it and many errors appear like no text at all on screen use Google now launcher and all text issues are gone and swipe to Google now cards works perfectly, were as it doesn't in default lineage OS launcher. Icons are back with text and folders have text when in Google now launcher but as soon as I go to lineage OS default launcher no text on icons or folders.
https://download.lineageos.org/athene
Official lineage os is live. With experimental and nightly rom.
Hi,
Has anyone already tested the new offical ROM?
I've seen in the build.prop that again this ominous line "ro.sys.sdcardfs", which causes access problems on the SD.
How are the experiences?
Using it now and it is super slow on downloads even on WiFi, it removes the moto boot screen from non official lineage os build and now has lineage os boot screen it also removes the nogurt software buttons that are in non official build and replaces them with mm software keys. Has a proper ota updated now but that's super slow running at 200kbps even though WiFi is 14mbps, so far bug free unlike unofficial build.
Okay so I've been trying some treble gsi's and yesterday I installed the AICP image on my phone. I've had zero issues, magisk works, substratum works, the style option in settings works, magisk modules work, the rom is really smooth and has a lot of settings and the battery life is pretty good too :^]
Download link: https://drive.google.com/drive/folders/1LtPNR6R4dxJslXFIjpF9FhyfEfhBTCOa
List of available treble images: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
Gapps: https://opengapps.org
Latest magisk: https://drive.google.com/file/d/1YftvNNZVruyYgtFE5wFsgLTDDb4Yux5W/view
Install process is the same as with any other treble rom.
Happy flashing!
edit: typos
Quick question... where did you get this? Because I never saw a AICP treble ROM thread. Anyway, that doesn't really matter. I have to give you my gratitude for sharing this ROM! I was about to give up and go back to the ugly stock EMUI.
I owe you one!
EDIT: It would be better to say in the original post if there are GApps included with this ROM or not, it would help clear up some confusion.
crayonicle said:
Quick question... where did you get this? Because I never saw a AICP treble ROM thread. Anyway, that doesn't really matter. I have to give you my gratitude for sharing this ROM! I was about to give up and go back to the ugly stock EMUI.
I owe you one!
EDIT: It would be better to say in the original post if there are GApps included with this ROM or not, it would help clear up some confusion.
Click to expand...
Click to collapse
I feel you man, at first I thought treble was too unstable for daily usage but luckily I was wrong! I found the rom on a github page of a fellow xda user: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
It has all the treble roms that are currently availabe if you wanna try 'em out
And there are no gapps included in the rom itself, I used the pico package from opengapps.
jetzecazemier said:
I feel you man, at first I thought treble was too unstable for daily usage but luckily I was wrong! I found the rom on a github page of a fellow xda user: https://github.com/phhusson/treble_experimentations/wiki/Generic-System-Image-(GSI)-list
It has all the treble roms that are currently availabe if you wanna try 'em out
And there are no gapps included in the rom itself, I used the pico package from opengapps.
Click to expand...
Click to collapse
HOLY MOLY ???
Thanks for the link, never would have found it by myself :good::good::good:
crayonicle said:
HOLY MOLY ???
Thanks for the link, never would have found it by myself :good::good::good:
Click to expand...
Click to collapse
Most welcome!
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Vinayak.pk1 said:
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Click to expand...
Click to collapse
Volte doesn't work, i don't think any of the treble roms have it though, same goes for safetynet. Camera works great tho.
jetzecazemier said:
Volte doesn't work, i don't think any of the treble roms have it though, same goes for safetynet. Camera works great tho.
Click to expand...
Click to collapse
You can make just about any ROM pass safteynet by grabbing Magisk Root, and install the module MagiskHide Props Config. Then using the terminal commands you can install the Huawei fingerprint thus passing safteynet correctly.
Vinayak.pk1 said:
Does it pass safety net and does volte works ? Can you please confirm it . and what about camera does it work fine in this rom ?
Click to expand...
Click to collapse
See above
Wh1t3Rose said:
You can make just about any ROM pass safteynet by grabbing Magisk Root, and install the module MagiskHide Props Config. Then using the terminal commands you can install the Huawei fingerprint thus passing safteynet correctly.
See above
Click to expand...
Click to collapse
That's awesome! I didn't know about that. I've ran into an issue with the terminal tho when trying to run su:
$ su
CANNOT LINK EXECUTABLE "/sbin/su": "/data/data/com.termux/files/usr/lib/libtermux-exec.so" is 64-bit instead of 32-bit
Aborted
Any solution for this?
Possible to have a antutu screenshot?
jetzecazemier said:
That's awesome! I didn't know about that. I've ran into an issue with the terminal tho when trying to run su:
$ su
CANNOT LINK EXECUTABLE "/sbin/su": "/data/data/com.termux/files/usr/lib/libtermux-exec.so" is 64-bit instead of 32-bit
Aborted
Any solution for this?
Click to expand...
Click to collapse
Sounds like root isn't install correctly? Did you check with Root Checker from play store? Which terminal program did you use? You ran su and granted root access first right?
I can't get this ROM to flash. tried both with fastboot tools and flashing the img in TWRP. I just get the Generic "Serious problems have occurred..." message
Edit: NVM I am a moron. Was flashing the AB image. :facepalm:
Bugs spotted
1. Lockscreen clock sometimes does not show, along with the date. I don't know the reason why, it just sometimes doesn't show it, like when your reboot your phone.
2. Can't set duration for long pressing the power button to enable the flashlight.
That's all the bugs I've noticed so far.
crayonicle said:
1. Lockscreen clock sometimes does not show, along with the date. I don't know the reason why, it just sometimes doesn't show it, like when your reboot your phone.
2. Can't set duration for long pressing the power button to enable the flashlight.
That's all the bugs I've noticed so far.
Click to expand...
Click to collapse
Is there a TWRP that works with Custom 8.1 Roms? I checked the P10 forums and nada Everything is EMUI 8.1 or Custom 8.0 ROMs only. I need working TWRP for this ROM.
Wh1t3Rose said:
Is there a TWRP that works with Custom 8.1 Roms? I checked the P10 forums and nada Everything is EMUI 8.1 or Custom 8.0 ROMs only. I need working TWRP for this ROM.
Click to expand...
Click to collapse
If you need one for the Honor 7x, use this TWRP that I uploaded to Google Drive just now .
Not my TWRP, just uploading to Google Drive just in case :good:
crayonicle said:
If you need one for the Honor 7x, use this TWRP that I uploaded to Google Drive just now .
Not my TWRP, just uploading to Google Drive just in case :good:
Click to expand...
Click to collapse
Thanks I had that same one but for some reason mine wasn't working. Must've gotten corrupted at some point.
Anybody having issues with Play Services crashing?
Wh1t3Rose said:
Thanks I had that same one but for some reason mine wasn't working. Must've gotten corrupted at some point.
Anybody having issues with Play Services crashing?
Click to expand...
Click to collapse
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
crayonicle said:
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
Click to expand...
Click to collapse
Yes. I'll try flashing again
crayonicle said:
On this AICP ROM? No, I never got the error.
Did you do a clean flash, and did you do a factory reset after flashing this rom?
Got lots of apps crashing because I didn't do a factory reset after flashing treble ROMs.
Click to expand...
Click to collapse
No go. Still get crashing with play services. Just to be sure you are flashing Pico Gapps 8.1 ARM64 right?
I tried a factory reset with stock recovery as well.
Wh1t3Rose said:
No go. Still get crashing with play services. Just to be sure you are flashing Pico Gapps 8.1 ARM64 right?
I tried a factory reset with stock recovery as well.
Click to expand...
Click to collapse
Yes, that's right, I'm using Pico GApps 8.1 ARM64, try clearing cache of download manager, downloads, google play services, and google play store?
Hi !
Does it work on BND-L21C432 ? What are the steps to install the rom ? Does it have to be EMUI 8.0 ?
Thank you for your work on this rom!
Official builds now available https://download.lineageos.org/bacon
useless thread, requested delete
Thanhbat said:
useless thread, requested delete
Click to expand...
Click to collapse
edit: not sure if you meant that build is to be deleted.
kundancool said:
link to that
Click to expand...
Click to collapse
Misunderstanding thread title. Title is lure
Thanhbat said:
Misunderstanding thread title. Title is lure
Click to expand...
Click to collapse
Doesn't allow editing to it.
Cannot install lineage-15.1-20180618-nightly-bacon-signed.zip
Tried to install lineage-15.1-20180618-nightly-bacon-signed.zip, but it fails saying "This is for bacon, your device is ." ??
el_alemany said:
Tried to install lineage-15.1-20180618-nightly-bacon-signed.zip, but it fails saying "This is for bacon, your device is ." ??
Click to expand...
Click to collapse
I just updated my device from LineageOS 14.1 was flawless
Please update your TWRP and retry https://dl.twrp.me/bacon/twrp-3.2.1-0-bacon.img.html
Thanks, that did the trick !
kundancool said:
I just updated my device from LineageOS 14.1 was flawless
Please update your TWRP and retry
Click to expand...
Click to collapse
kundancool said:
I just updated my device from LineageOS 14.1 was flawless
Please update your TWRP and retry https://dl.twrp.me/bacon/twrp-3.2.1-0-bacon.img.html
Click to expand...
Click to collapse
Is your device encrypted and if so, do you have problems decrypting the data partition?
No my device was not encrypted but I am placing to encrypt one I have backup
Faced the same error. Updating TWRP helped. Able to install successfully.
Does Google pay work?
I've been waiting for this for a long time
Big Thanks for the Devs !!!
Works fine.
How to get blurred lock screen?
I dirty flashed it a couple hours ago, so far so good. I snapped a few pictures, made a call, started some apps that i use daily, everything works as expected. The only thing I miss is the Protected App feature
Igazine said:
I dirty flashed it a couple hours ago, so far so good. I snapped a few pictures, made a call, started some apps that i use daily, everything works as expected. The only thing I miss is the Protected App feature
Click to expand...
Click to collapse
dirty flashed from 14.1 or unofficial 15.1 ?
arjun said:
dirty flashed from 14.1 or unofficial 15.1 ?
Click to expand...
Click to collapse
from official 14.1 nightly. i've always used the OTA updater and this morning i got the notification to download and manually install new version. i was quite happy, waiting for this a long time
---------- Post added at 09:48 AM ---------- Previous post was at 08:55 AM ----------
Update with some more details after trying 15.1 it for a couple hours.
The phone became unrooted so I could finally try Magisk which I haven't been able previously (I did not want to mess with root, stock boot img etc)
What works
Wifi
Cellular and mobile data
Bluetooth (my BT headphones are perfectly working)
Android Debugging
Magisk (Google Pay works, I still can't install Netflix from Play Store, but it's not LineageOS' fault)
Daily apps: Facebook messenger, Instagram, Phone, Messages, Kindle, Discord
What doesn't
I can't find Protected Apps feature in Settings. If I'm searching for it, the menu crashes (not implemented yet?)
Occasionally a few apps are crashing. Not too annoying, not too frequent, happened 3-4 times since I've updated this morning. Apps crashed: Magisk, Settings app
AudioFX is missing
120fps video recording (wasn't working in 14.1 either)
I haven't tested yet
Battery
Overall experience: everything is smooth and working fine so far. I'm pretty sure the few annoyances will be fixed soon, great work by the devs!
screen goes blank
Hi
Just flashed official LOS from unofficial LOS 15.1. After first boot screen goes blank.
Which gapps is compatible? Download fails when I try to download 8.1 stock from gapps website
Clean flashed and used Mindthegapps 6/10. Works very well, as expected by LineageOS. Been waiting for this one.
Vinayak_9782 said:
Hi
Just flashed official LOS from unofficial LOS 15.1. After first boot screen goes blank.
Which gapps is compatible? Download fails when I try to download 8.1 stock from gapps website
Click to expand...
Click to collapse
8.1 stock ? why ? use arm 8.1 nano/micro/mini........ nano is recommended.
The LineageOS for microG project has released its first build based on LOS 15.1 for our bacon.
Anybody interested can find the project page and downloads here:
https://lineage.microg.org/
https://download.lineage.microg.org/bacon/
Thanks, I'm keen to give it a go. Finally making the step to update from Nougat and want to step away from Play where I can.
cobrin said:
Thanks, I'm keen to give it a go. Finally making the step to update from Nougat and want to step away from Play where I can.
Click to expand...
Click to collapse
Once you go microG you never go back
Im sorry if this is off topic. I've had my opo since 2015, never rooted or installed custom roms.
I've lately been wanting some change, and lineage with microG seems like a great place to start my custom rom journey.
My only worry is that many tutorials for rooting/install roms seems slight dated or focused on windows environments, I am on linux.
Can i safely follow tutorials from 2014/15 or has there been many changes that i should be aware of when rooting and installing lineage with microG?
newerthscout said:
Im sorry if this is off topic. I've had my opo since 2015, never rooted or installed custom roms.
I've lately been wanting some change, and lineage with microG seems like a great place to start my custom rom journey.
My only worry is that many tutorials for rooting/install roms seems slight dated or focused on windows environments, I am on linux.
Can i safely follow tutorials from 2014/15 or has there been many changes that i should be aware of when rooting and installing lineage with microG?
Click to expand...
Click to collapse
Hi
The way to do it is still the same.
Just be sure to use latest files (twrp 3.2.1.0 or newer and latest magisk for root).
Using linux seemed to me even easier.
The basic steps are: have adb installed on linux pc, then unlock bootloader, then install twrp.
In twrp make a backup and then flash roms and other stuff.
But as you said there are many guides how to do. Just search for how to unlock bootloader and install twrp using linux.
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 10:09 PM ---------- Previous post was at 10:03 PM ----------
Just one more thing: be sure to be on latest official firmware/version
Sent from my [device_name] using XDA-Developers Legacy app
TriboDoP said:
Hi
The way to do it is still the same.
Just be sure to use latest files (twrp 3.2.1.0 or newer and latest magisk for root).
Using linux seemed to me even easier.
The basic steps are: have adb installed on linux pc, then unlock bootloader, then install twrp.
In twrp make a backup and then flash roms and other stuff.
But as you said there are many guides how to do. Just search for how to unlock bootloader and install twrp using linux.
Sent from my [device_name] using XDA-Developers Legacy app
---------- Post added at 10:09 PM ---------- Previous post was at 10:03 PM ----------
Just one more thing: be sure to be on latest official firmware/version
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
That makes me much more confident in trying it out. Glad you mentioned Magisk, I saw it used some places for new oneplus phones, but wasn't sure if i should stick to superSU.
Thank you so much!
@CedArctic Im new to microg. How I can sync my google contact? Thanks
Thanhbat said:
@CedArctic Im new to microg. How I can sync my google contact? Thanks
Click to expand...
Click to collapse
You can either use DavDroid (CardDAV) (search google on how to configure it to work with Google) or you can use Google's own proprietary sync mechanism which you can install through flashing Nanodroid (find it on XDA).
The old OnePlus One is quite a beast with this really effective ROM. It's faster and smother than my Nubia Z11 with Android 7.1 and even faster than the LG G6 on 7.1 . If It only could have LTE band 20 ....
Doesnt even boot...
After lineageos logo ir restart to recovey xD
bootloop to recovery after update to 15.1
i tried to update from 14.1 lineage micro g to 15.1. as it recommends on https://lineage.microg.org/ i just flashed the zip without wiping anything. now i am getting a bootloop back to recovery. tried to delete caches, no difference. flashed it again, no difference. used twrp 3.2.3-0.
could you help me?
This ROM is as good as a ROM can get. Everything just works, also the difficult-to-do-and-often-ignored parts like encryption. I don't even remember when 60FPS high speed recording actually worked on Oneplus one (yes, its included in majority of ROMs out there, but doesn't actually record in 60FPS but rather 30FPS). But even that works!
In addition, there's no random reboots, SELINUX is enforcing, security patches are up to date and battery lasts for 48h with moderate use. And microg is just truly wonderful piece of software.
This ROM is a wonderful piece of genuine professionalism that is truly hard to find.
tofu said:
This ROM is as good as a ROM can get. Everything just works, also the difficult-to-do-and-often-ignored parts like encryption. I don't even remember when 60FPS high speed recording actually worked on Oneplus one (yes, its included in majority of ROMs out there, but doesn't actually record in 60FPS but rather 30FPS). But even that works!
In addition, there's no random reboots, SELINUX is enforcing, security patches are up to date and battery lasts for 48h with moderate use. And microg is just truly wonderful piece of software.
This ROM is a wonderful piece of genuine professionalism that is truly hard to find.
Click to expand...
Click to collapse
Agreed. It works with official play store too, so I can use PRO features of Greenify. Also xposed is running well. Root cloak can hide addonsu.
Best ROM for bacon so far.
It's just I can't hide some apps notifications from lock screen. But maybe it's oreo problem..
salmanfarisy said:
Agreed. It works with official play store too, so I can use PRO features of Greenify. Also xposed is running well. Root cloak can hide addonsu.
Best ROM for bacon so far.
It's just I can't hide some apps notifications from lock screen. But maybe it's oreo problem..
Click to expand...
Click to collapse
Where you get official play store? I can only get yalp store
Thanhbat said:
Where you get official play store? I can only get yalp store
Click to expand...
Click to collapse
Get it from this page:
https://shadow53.com/android/downloads/microg/
Download the standalone play store (the patched one) and flash it via twrp.
salmanfarisy said:
Get it from this page:
https://shadow53.com/android/downloads/microg/
Download the standalone play store (the patched one) and flash it via twrp.
Click to expand...
Click to collapse
With this PS, I don't need login and can download every paid apps, true?
Thanhbat said:
With this PS, I don't need login and can download every paid apps, true?
Click to expand...
Click to collapse
You need to login to official play store with your own account, and you can download previously purchased paid apps, and you can purchase paid apps you want.
With yalp store, i can login with my own account and download previously purchased paid apps, but I can't use that apps because some apps want to check license, something that yalp store can't do.
Just reporting in case someone is interested:
I dirty flashed the latest microg lineage 16.0 (build 11.3.2019) over encrypted microg lineage 15.1. and to my suprise everything went smoothly. Zero issues! I even have separate long boot password, and short screen lock pin. Since google disabled raw encryption commands in Pie, you no longer cannot do it easily.
But this thing just works, amazing.
tofu said:
Just reporting in case someone is interested:
I dirty flashed the latest microg lineage 16.0 (build 11.3.2019) over encrypted microg lineage 15.1. and to my suprise everything went smoothly. Zero issues! I even have separate long boot password, and short screen lock pin. Since google disabled raw encryption commands in Pie, you no longer cannot do it easily.
But this thing just works, amazing.
Click to expand...
Click to collapse
How is microG's LOS 16 performance and battery life?
CedArctic said:
How is microG's LOS 16 performance and battery life?
Click to expand...
Click to collapse
Battery seems better, but I need to see couple of battery cycles to be sure. I'll report here in fews days!
I don't have any complains regarding performance.
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
anshul1123 said:
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
Click to expand...
Click to collapse
Have a look at the guides section https://forum.xda-developers.com/oneplus-5/how-to/android-p-coming-to-5-5t-year-t3787602
anshul1123 said:
Hi Everyone ,
Not sure if this is too much to ask, but can someone guide me in the direction or send a post with all links from scratch to boot android 9 with Treble support on my oneplus 5 not the 5T.
Thanks,
Anshul
Click to expand...
Click to collapse
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Pho3nX said:
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Click to expand...
Click to collapse
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
archer797 said:
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
Click to expand...
Click to collapse
yes, still required
Hey guys I'm looking into flashing all this, but can you guys tell me what doesn't work? What are the differences with custom roms?
From what I understand, it's similar to a custom ROM in terms of camera (not fully working), in terms of volte (doesn't work).
I'm willing to test but since it takes a lot of time on my side (need to fully backup etc...), I hope it works fine
Also, the gsi is the lastest version now that official P is out?
Sent from my OnePlus5 using XDA Labs
matssa said:
Hey guys I'm looking into flashing all this, but can you guys tell me what doesn't work? What are the differences with custom roms?
From what I understand, it's similar to a custom ROM in terms of camera (not fully working), in terms of volte (doesn't work).
I'm willing to test but since it takes a lot of time on my side (need to fully backup etc...), I hope it works fine
Also, the gsi is the lastest version now that official P is out?
Click to expand...
Click to collapse
You should ask rom related things in the rom thread https://forum.xda-developers.com/pr...-android-p-developer-preview-t3816659/page116
I am on open beta 15. I saw this video of formatting data, then installing mokee rom, mounting vendor and installing gsi image of dp5 of android p.
Things seemed pretty easy.
I did the exact steps. I am stuck at a point where i can't find vendor option in mount of twrp.
Could someone guide me on what can de done?
cosmic077 said:
I am on open beta 15. I saw this video of formatting data, then installing mokee rom, mounting vendor and installing gsi image of dp5 of android p.
Things seemed pretty easy.
I did the exact steps. I am stuck at a point where i can't find vendor option in mount of twrp.
Could someone guide me on what can de done?
Click to expand...
Click to collapse
Change twrp. I use blu spark twrp and if i remember right it's name had treble
Vika__ said:
Change twrp. I use blu spark twrp and if i remember right it's name had treble
Click to expand...
Click to collapse
Thanks bro. Lets see if that helps. I saw two videos and both used different twrps.
Today i ll try with blu spark treble twrp.
Lets see if it works.
is volte working ?
On PR1 i have one bug. When send screen to my Anycast , find it and when i select it show "connecting" but never connect. When try connect i see bright up and go to lock screen but donĀ“t send image. Anymore have this problem ?. Any idea to solved it ?. I tried diferent kenels, update mokee vendor base , add entries to build.prop refer to this problem, ..... . Thanks.
Chnages on PR1 over DP5
Pho3nX said:
Just follow my tutorial : HERE
In my tutorial Replace DP5 by the PR1 links HERE
Click to expand...
Click to collapse
Can you get some link detailing the Changelog about PR1, I am trying to find the changes in PR1 over DP5.
I treid DP5 on Oneplus 5 and it was still Highly unstable, Video Call feature missing without DUO, Front camera not workng in Ported Google Camera, and many other problems like only LTE no VoLTE support yet. So I am looking for changelog of PR1. ( or you could just mention few changes)
abhinav.kakku said:
Can you get some link detailing the Changelog about PR1, I am trying to find the changes in PR1 over DP5.
I treid DP5 on Oneplus 5 and it was still Highly unstable, Video Call feature missing without DUO, Front camera not workng in Ported Google Camera, and many other problems like only LTE no VoLTE support yet. So I am looking for changelog of PR1. ( or you could just mention few changes)
Click to expand...
Click to collapse
It's not an official OnePlus release, it's a ported rom, you have to expect problems.
djsubterrain said:
It's not an official OnePlus release, it's a ported rom, you have to expect problems.
Click to expand...
Click to collapse
I know that, Official will take much time now. Hope there is improvement over DP5
apparently we can use VOLTE fix from mi4 on our device
can anybody verify that ?
Android P PR1 stuck on Boot Loop to recovery on Oneplus5
I have followed the steps, Wipe device,
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery.
abhinav.kakku said:
I have followed the steps, Wipe device,
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery.
Click to expand...
Click to collapse
With wipe device you mean formatting data right? After completing mokee set up when you reboot to recovery swipe to factory reset and then flash A image and so on
seniug said:
With wipe device you mean formatting data right? After completing mokee set up when you reboot to recovery swipe to factory reset and then flash A image and so on
Click to expand...
Click to collapse
Agreed your steps need to be:
I have followed the steps, Wipe device, format data
install Mokkie ROM latest Nightly build 20180814
Install No Verity Zip
reboot and mount System, Vendor
flash A only image
now flash GSI 1,2,3
flash incall2 and Permisiver zip.
Reboot to system, but stuck in loop to boot to recovery
---------- Post added at 08:03 AM ---------- Previous post was at 08:00 AM ----------
archer797 said:
I am on OB14 (Treble Enabled ROM). Is it still required to flash Mokee rom?
Click to expand...
Click to collapse
Does anyone know what purpose the Mokee ROM portion of the setup serves on a technical level? Also has anyone noticed that the front camera works on snapchat but not in the google cam port? interesting stuff.