Hi,
I want to replace my charging port. I read about 2 different Versions: rev.19 and rev.25.
I looked at my charging port and there was no lettering. Which one should I use for my S4 Value Edition or has it a special Version?
Best regards
Has nobody an idea? Swiching the battery every day isn't funny
Happy new year
Simon
Hi....I wrote a guide on this exact subject....but for the S2. In the case of the S2, there were/are 4 different variants or 'rev' versions of this board for the international version of the phone on its own (and numerous other boards for the other variants). My instinct tells me the S4 has a similar setup, and that being the case, then the 'rev version' of the board you buy needs to match the 'rev version' of the board you remove from your phone.
If the board you remove is the original factory fitted board, it *will* have the version printed on it somewhere. It could be on either side of the board or it could be on the cable that attaches the board to the rest of the phone......but it *will* be there.
You need to re-examine the faulty board thoroughly to look for the Rev version number....I've a nasty feeling it will be critical for successful repair of the phone.
unimetal said:
Hi,
I want to replace my charging port. I read about 2 different Versions: rev.19 and rev.25.
I looked at my charging port and there was no lettering. Which one should I use for my S4 Value Edition or has it a special Version?
Best regards
Click to expand...
Click to collapse
Here are some links to try:
https://www.ifixit.com/Device/Samsung_Galaxy_S4
http://www.witrigs.com/replacement-parts-charging-port-flex-cable-for-samsung-galaxy-s4-gt-i9505-oem
https://forum.xda-developers.com/galaxy-s4-sprint/help/q-t3521720
Sent using the d2vzw Communicator from the Bridge of the U.S.S. Enterprise (N.C.C. 1701).
Related
Dear all,
at this moment I am trying to repair the micro-USB connector on my HTC HD2. At the moment it only charges when inserted in a certain angle, this is not very convenient and as I am willing to experiment, I want to replace the micro-USB by myself.
Therefore I've brought some soldering tools and such, I haven't opened my HTC HD2 yet, as I am doing preparations first. However I am stuck at what micro-USB female plug I should buy to replace the one on the HTC HD2 (european edition; 512 MB).
Can someone give me advice? I would like to replace the micro-USB port with one that is exactly the original model. I've found the following products on Farnell, please type micro USB female which one should I buy? Or does someone have any other recommandations?
I will try to keep you guys posted on my replacement procedures.
PS: I am unable to post links as I don't have a lot of posts, however I spend a lot of time reading posts here.
http://www.ebay.co.uk/itm/HTC-HD2-T...K_Replacement_Parts_Tools&hash=item41582a72ca
http://www.ebay.co.uk/itm/ORIGINAL-...K_Replacement_Parts_Tools&hash=item4cf7d6215d
http://www.ebay.co.uk/itm/ORIGINAL-...K_Replacement_Parts_Tools&hash=item4cf7d6215d
Just a few options for you there
Hey, thanks for your response, however I'm not really comfortable with the price, it's even more expensive than my cable, as it is in pounds. However can anyone identify what kind of micro usb this is? (Type)
temp_tsun,
You didn't state where you're from, or in what country you'd prefer the vendor be located. But to answer your question:
It's considered a "standard" Micro-USB, or more precisely a 5-pin micro-USB "Type B" port. Google around for those keywords in conjunction with phrases like "HD2/Leo charging port", "...charging connector", etc, and you'll find some vendor candidates. Looking around for a minute or two and comparing prices I found this one: cellularpartsusa.com/htc-hd2-charging-connector.html. Cheap, but I don't know anything about the merchant or what their shipping rates are. Also, I remember reading somewhere that other OEM versions of this part may be compatible with the HD2, possibly the Blackberry Bold. So, expanding the search I found
sw-box.com/Usb-Charging-Connector-Port-For-Blackberry-Bold-9700-Curve-8520.html and
cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=400203459666&hlp=false, but you better ascertain first that it's the same part since I can't be 100% sure.
Hope that helps. Good luck with your surgery...
I'm sorry, I'm from the Netherlands. I own an EU version of the HTC HD2. I'm currently delaying my surgery because the order of several soldering tools are delayed. I will try to make pictures and post them online to help others a) preventing the mistakes I made (and my phone will probably die ) b) showing others how I did it and hopefully more surgeries will succeed.
PS: I'm going to order this one, hopefully on monday I will have it =).
temp_tsun said:
I'm sorry, I'm from the Netherlands. I own an EU version of the HTC HD2. I'm currently delaying my surgery because the order of several soldering tools are delayed. I will try to make pictures and post them online to help others a) preventing the mistakes I made (and my phone will probably die ) b) showing others how I did it and hopefully more surgeries will succeed.
PS: I'm going to order this one, hopefully on monday I will have it =).
Click to expand...
Click to collapse
Did you manage to repair this yourself ?
I also have a broken USB port, which I since found to now be detached from the circuit board when I disassembled the HD2. I don't think I am good enough to solder a replacement (as it is so small!), so am keen to hear how you went ?
i'd like to know too, as i foolishly returned the phone to HTC and had them break it completely for me. They offered a new motherboard for £215 or aboy $450 dollars outside of warranty. now i need a charging mat and am back on win mo 6.5.
If you need a univesal or part's please contact me I have a ton of spare parts and i'm selling cheap
http://www.ebay.nl/itm/221171815076
http://www.ebay.nl/itm/221171835214
I Have A lot of Qtek 9000 Phones, For Parts, For repair, or just to use.
There are 7 working gsm's
There are 10 With various problems, some are repairable, some not
There are 5 with no mainboard, 2 have no lcd aswel (picture shows 3, but there is a spare!)
There are 20 Working LCD's and more Ribbons, And 7 perfect working pcb's
There are 11 Accus, All the good working telephones have a 100% good working accu
No chargers and also only one stylus
On the flipside i have written what te problem is, some phones have never been opend.
There is a bag with screws and plates, usb ports and also 2 new usb ports.
almost forgot 3 original leather sleeves
This is a private sale, Al is as listed, Used and only a fiew are good working There are parts missing!! but this can be a sweet deal becouse the parts are rare and realy expensive.
Click to expand...
Click to collapse
Abel2007 said:
@ Admin. I know this is probably not alowed, but the marketspace is closed and this section is almost dead.
So please bare with me and lock this thread but delete this after 10 days.
http://cgi.ebay.nl/ws/eBayISAPI.dll?ViewItem&item=221168450816
Click to expand...
Click to collapse
This is exactly what i need to do some projects but, that's a lot to drop on a hobby. Maybe someone who can part them out will buy them.
keep an eye out on the sale, if not sold please contact me thru ebay:good:
that's good
that's so good, but what if i need only one "even if with broken screen" , is it possible ?
PS. I only need the main board, please help
please wait until the ebay ad has expired. If not sold i will do separate sales, I unfortunatly have no spare good mainboards, but working universal will not be expensive One with small usb problem wil be cheaper ofcourse
I tried to get some help in the Q&A section, but it appears this is more technical/hardware seeking question than just generic "which phone" thread.
I have been suggested Samsung Galaxy Spica/i5700 by boofman (thank you), but the device is cost prohibitive.
I would very much appreciate anyone's suggestion.
I am planning a presentation to demonstrate the benefits of JTAG for data recovery on embedded systems. The audience has approx. 12th grade education, but higher than average computer understanding.
I have most of the equipment already, including a uLINK2, Bus Blaster, and Raspberry Pi for the UART-to-USB, and OpenOCD for the software.
What I am missing is the simplest cell phone (or other inexpensive embedded device) to make the demonstration.
I would like to connect to the device and list the devices on the JTAG chain, and recover the data from them.
What cell phone brand and model would work well for this presentation?
I would need to know the JTAG points, have access to the data sheets of the onboard chips, and since it is out of my own pocket, I hope to get the phones on eBay for a low price.
Any suggestions are welcome.
huperetes said:
I tried to get some help in the Q&A section, but it appears this is more technical/hardware seeking question than just generic "which phone" thread.
I have been suggested Samsung Galaxy Spica/i5700 by boofman (thank you), but the device is cost prohibitive.
I would very much appreciate anyone's suggestion.
I am planning a presentation to demonstrate the benefits of JTAG for data recovery on embedded systems. The audience has approx. 12th grade education, but higher than average computer understanding.
Click to expand...
Click to collapse
You'd be surprised what kids know these days.
huperetes said:
I have most of the equipment already, including a uLINK2, Bus Blaster, and Raspberry Pi for the UART-to-USB, and OpenOCD for the software.
What I am missing is the simplest cell phone (or other inexpensive embedded device) to make the demonstration.
I would like to connect to the device and list the devices on the JTAG chain, and recover the data from them.
What cell phone brand and model would work well for this presentation?
I would need to know the JTAG points, have access to the data sheets of the onboard chips, and since it is out of my own pocket, I hope to get the phones on eBay for a low price.
Any suggestions are welcome.
Click to expand...
Click to collapse
Check out gsm-forum, under the hardware repair section.
Googling for jtag pins and your phone model number usually works for me. I'd assume you might have to wait a little bit for brand new devices, unless you feel like scoping the pins to find out which is which or hope their labeled.
These individuals are not kids. :fingers-crossed:
Excellent resource at the other site. Thanks!
But, I think I do not think I made myself clear regarding what I am looking for:crying:. I am not looking for info on how to JTAG a specific phone.
I am looking for 3 or 4 of the same model of cell phone that
I can pick up on eBay or similar for reasonable price (<$30/phone),
the JTAG TAP is known on the motherboard, and
it would be a bonus if the JTAG command set was known (besides the basic requirement).
This would allow me to make test run on one of the phones, then demonstrate the use of JTAG on the others.
The Samsung Galaxy Spica is a good phone, but I do not have the budget at $100+/phone. I need to find something cheaper. It does not need to be fancy telephone, or even smart phone - just have sufficient JTAG documentation.
If anyone has any ideas on what to use for this demo, I am still in need of a good idea.
You can look into any of the older HTC phones for this. I think that would be your best bet. I've done plenty of hardware repair, disassembling, reassambling, flashing, etc... on Android, & non-Android phones, & from my experience, the older HTC phones are the best. Specifically, concentrate on the GSM ones, such as for T-Mobile. Look into HTC myTouch 3G Slide (awesome little thing) , HTC G2 (one of the best keyboard phones ever), myTouch 4g, myTouch 4G Slide (overheating, self-destructing piece of crap), even the HD2 & the HD7. These are all devices that you can get for around $30 or so with a cracked, but still working digitizer, or some other kind of problem. Screens & other parts for them are very cheap as well.
Also, these are all known to RIFF Box. Look it up. You can do JTAG repair with these, & RIFF Box have all the JTAG ports labeled & documented. They might have some of the documentation right on their site, but I'm not totally sure. Anyway, check it out & see. I think this will be exactly what you're looking for.
Excellent! Thank you very much.
I have looked at looked at many commercial products, including RIFF Box. I narrowed the selections down the RIFF and ORT, but they are both very expensive for demonstration purposes.
I do love the fact that one can buy "jigs", "clips" or "adapters" (names change depending on vendors) which removes the soldering requirements for some of the phones. Except, these are still very expensive. :cyclops:
Again, thanks. I will look into these.
3ndymion218 said:
You can look into any of the older HTC phones for this. I think that would be your best bet. I've done plenty of hardware repair, disassembling, reassambling, flashing, etc... on Android, & non-Android phones, & from my experience, the older HTC phones are the best. Specifically, concentrate on the GSM ones, such as for T-Mobile. Look into HTC myTouch 3G Slide (awesome little thing) , HTC G2 (one of the best keyboard phones ever), myTouch 4g, myTouch 4G Slide (overheating, self-destructing piece of crap), even the HD2 & the HD7. These are all devices that you can get for around $30 or so with a cracked, but still working digitizer, or some other kind of problem. Screens & other parts for them are very cheap as well.
Also, these are all known to RIFF Box. Look it up. You can do JTAG repair with these, & RIFF Box have all the JTAG ports labeled & documented. They might have some of the documentation right on their site, but I'm not totally sure. Anyway, check it out & see. I think this will be exactly what you're looking for.
Click to expand...
Click to collapse
I'd go with Galaxy S 1 as it's really cool to work on and relatively well documented and demonstration on such stuff always looks well. But if you want something low-budget. I've seen JTAG pads on Nokia E50'ish stuff. Or try with some Samsung S3000's, these are pretty cheap. But I don't know how's JTAG there.
as @3ndymion218 told you , search old HTc .. also some Samsung that I think cheap could help too .
Samsung F480 , F490 , U700 , U900 etc ... some news Corby model also .. I think cheap .
I could help if you were near to me . I have 3 phones that I could offer you ...
Thank you for the further info.
Definitely will try to track down the HTC and Nokia information.
Samsung is a bit pricy as you said, but maybe down the road.
Again, thank you all!
Hey,
after a long search for battery switchable Smartphones, i bought the Note 4. I got a few questions:
1) is the eMMC Bug still present on "new" phones? I bought the Snapdragon Version (i need Modding/customROM Support) Can i check my phone about this?
2) is there still active development for this smartphone?
3) can you guys recommend a Wireless charger, batteries and an external charger?
Thankyou in advance!
Emmc bug is hardware failure, so not obvious to detect b4
Sent from this galaxy
Sorry wrongly posted
Hi,
This might not be the right platform to ask this, I'll ask anyway,
I'm looking for a USB Type-C charging cable for my Nokia 6.1 plus, as the original is damaged.
I asked the service center and official Nokia support, as they say they are out of stock.
On Amazon there are too many products with different seller of different brands, now i don't know which one to buy.
Also, I use the cable to connect to the PC and install custom roms.
So, i was hoping that any of you might suggest a quality cable.
Thank you
KHG04 said:
Hi,
This might not be the right platform to ask this, I'll ask anyway,
I'm looking for a USB Type-C charging cable for my Nokia 6.1 plus, as the original is damaged.
I asked the service center and official Nokia support, as they say they are out of stock.
On Amazon there are too many products with different seller of different brands, now i don't know which one to buy.
Also, I use the cable to connect to the PC and install custom roms.
So, i was hoping that any of you might suggest a quality cable.
Thank you
Click to expand...
Click to collapse
You can use the type-C cable of any famous brand, not necessary the original one.