A2017U Battery Percentage Problem - ZTE Axon 7 Questions & Answers

Hi everyone. I'm using Axon7 US version and I've problem about battery percentage. for example battery is on %20, I plug my phone to charging. it increases %10-15 after 30 minutes later. I reboot my phone and charge increases to around %70.
it's same on stock and cm13. do you have same problem?

Same problem here. Have no real idea where my battery is or how fast it is really charging.
Sent from my ZTE A2017U using Tapatalk

same here on A2017G
any luck in solving this problem? is it hardware related?

mystery4869 said:
same here on A2017G
any luck in solving this problem? is it hardware related?
Click to expand...
Click to collapse
I returned and ordered OnePlus 3t. Best buy only suggested that I take advantage of return policy. None of the sites had a fix that I searched. If axon release a fix later I may repurchase.
Sent from my LG-H918 using Tapatalk

Hi guys,
Did anybody solve this issue? the same in my Axon 7

You can't expect a lot of support when complaining about an issue without providing more details such as rom version or the charger and cable used to charge it. We can assume you are in stock rom using stock charger and cable. Try a factory reset. This would also reset the battery calibration values and you will see whether it is a hardware or software problem. In case of a hardware problem it is covered by the 2 year warranty. By the way, I do not have any problem.

Oki said:
You can't expect a lot of support when complaining about an issue without providing more details such as rom version or the charger and cable used to charge it. We can assume you are in stock rom using stock charger and cable. Try a factory reset. This would also reset the battery calibration values and you will see whether it is a hardware or software problem. In case of a hardware problem it is covered by the 2 year warranty. By the way, I do not have any problem.
Click to expand...
Click to collapse
Hi. First of all, thanks for your reply.
But i think you didn't read my post. I said it is same on stock and CM13. So i mentioned details. Just didn't mention ROM version. All accessories are original. I would say if they are not.
Whatever. I did factory reset and battery calibration. These methods didn't solved my problems.
Maybe problem is about my charger or cable. I couldn't try another one because i don't have.

WesTD said:
Hi. First of all, thanks for your reply.
But i think you didn't read my post. I said it is same on stock and CM13. So i mentioned details. Just didn't mention ROM version. All accessories are original. I would say if they are not.
Whatever. I did factory reset and battery calibration. These methods didn't solved my problems.
Maybe problem is about my charger or cable. I couldn't try another one because i don't have.
Click to expand...
Click to collapse
My advice then is to use the warranty. However I'd do a final attempt while restoring internals to factory default.
Try to flash the B20 stock ROM and update up to B29. This will restore not just the ROM, but also the firmware of some internal peripherals. You can find the kit with the files inside the TWRP official thread. Just install it.

Oki said:
My advice then is to use the warranty. However I'd do a final attempt while restoring internals to factory default.
Try to flash the B20 stock ROM and update up to B29. This will restore not just the ROM, but also the firmware of some internal peripherals. You can find the kit with the files inside the TWRP official thread. Just install it.
Click to expand...
Click to collapse
actually it was same since i've bought the phone. I can't use warranty because i'm living on Turkey. I hope it is about software and ZTE can solve it. But i don't trust them anymore. Whatever

Oki said:
My advice then is to use the warranty. However I'd do a final attempt while restoring internals to factory default.
Try to flash the B20 stock ROM and update up to B29. This will restore not just the ROM, but also the firmware of some internal peripherals. You can find the kit with the files inside the TWRP official thread. Just install it.
Click to expand...
Click to collapse
I'm having the same problem, can you please help me with the B20 and B29 donwloads link?

Related

N-910C Camera Failed - Even HW replacement doesnt solve!

Hi All,
Im posting this thread after review all others.
I have the phone for almost an year and everything was working fine.
Suddenly the Camera stopped working.
The problem is only in the rear camera. Front camera is working.
Wipe data / Factory reset from setting or Pwr+Home+Vol up doesnt help.
Also i even went to a phone shop and tried to replace the camera. After 3 different cameras the tech told me he dont know what to do and think need motherboard replacement. Another thing is the flash that i tought might stopped working but it is still functioning properly.
Need your wise help guys! Appriciate every comment or suggestion!
Thanks,
Eyal.
Have you tried reflashing the stock ROM back onto your device? There is a chance that the drivers for your main camera maybe corrupted or have been deleted. If that doesn't work then you are going to need a replacement motherboard.
DarkGuyver said:
Have you tried reflashing the stock ROM back onto your device? There is a chance that the drivers for your main camera maybe corrupted or have been deleted. If that doesn't work then you are going to need a replacement motherboard.
Click to expand...
Click to collapse
Thank you for taking time looking amd replying.Thats an intresting option. I didnt tried that.
However i also didnt found a root method for the N-910C. I would need to replace the kernel with a different one and i cannot find a suitable Kernel.
Let me explore this option and lets see.
If you have any direction on the rooting part it would be great.
Thanks,
Eyal.
Ummm, if you have no experience in rooting your device I would strongly recommend you avoid doing that as you can easily brick your device. I'd highly recommend you reflashing the stock ROM back onto your device to see if that will fix your problem. Otherwise you will need to replace the motherboard.
DarkGuyver said:
Ummm, if you have no experience in rooting your device I would strongly recommend you avoid doing that as you can easily brick your device. I'd highly recommend you reflashing the stock ROM back onto your device to see if that will fix your problem. Otherwise you will need to replace the motherboard.
Click to expand...
Click to collapse
Thanks man, ive rooted many devices i had in the past, the New ones dont need that as everything is quite good out of the box.
the problem is to find a kernel matching the 'C' version. all the rest is easy.
let me look into it.
djshubi said:
Hi All,
Im posting this thread after review all others.
I have the phone for almost an year and everything was working fine.
Suddenly the Camera stopped working.
The problem is only in the rear camera. Front camera is working.
Wipe data / Factory reset from setting or Pwr+Home+Vol up doesnt help.
Also i even went to a phone shop and tried to replace the camera. After 3 different cameras the tech told me he dont know what to do and think need motherboard replacement. Another thing is the flash that i tought might stopped working but it is still functioning properly.
Need your wise help guys! Appriciate every comment or suggestion!
Thanks,
Eyal.
Click to expand...
Click to collapse
Its a N-910C it still has warranty for a few months as each samsung phone comes with 24months. How could the Samsung Tech not replace or fix the camera under warranty?
Also why did they try 3 different types, you would have though after the first they would stop if they matched up the model number of the parts etc before even opening the phone.
djshubi said:
Thanks man, ive rooted many devices i had in the past, the New ones dont need that as everything is quite good out of the box.
the problem is to find a kernel matching the 'C' version. all the rest is easy.
let me look into it.
Click to expand...
Click to collapse
You would be better off just reflashing the stock ROM back onto your device rather than go hunting for the individual kernel. As the original firmware file probably has that within it.
A|ex said:
Its a N-910C it still has warranty for a few months as each samsung phone comes with 24months. How could the Samsung Tech not replace or fix the camera under warranty?
Also why did they try 3 different types, you would have though after the first they would stop if they matched up the model number of the parts etc before even opening the phone.
Click to expand...
Click to collapse
Thanks for your reply, im living in thailand and bought the phone in non samsung shop, so i have to go to this places where they almost know what they do , but frenkly they are pro's, for some reason it didnt work so they tried 3 cameerras , this is how it is here
DarkGuyver said:
You would be better off just reflashing the stock ROM back onto your device rather than go hunting for the individual kernel. As the original firmware file probably has that within it.
Click to expand...
Click to collapse
What do you mean?
Can i reflesh an unrooted phone?
in order to root i need to replace the Kernel as this is 5.1.1 (as far i understood have some lock mechanism from rooting)
if you know somehing else it would have alot.
Thanks,
Eyal.
djshubi said:
What do you mean?
Can i reflesh an unrooted phone?
in order to root i need to replace the Kernel as this is 5.1.1 (as far i understood have some lock mechanism from rooting)
if you know somehing else it would have alot.
Thanks,
Eyal.
Click to expand...
Click to collapse
From what I understand you should be able to reflash the stock Samsung ROM back onto your device. This will remove the root functions and restore your device back to when it left the factory.
DarkGuyver said:
From what I understand you should be able to reflash the stock Samsung ROM back onto your device. This will remove the root functions and restore your device back to when it left the factory.
Click to expand...
Click to collapse
Yes, but to re-flesh i need first to root the device. this is where i'm struggling.
djshubi said:
Yes, but to re-flesh i need first to root the device. this is where i'm struggling.
Click to expand...
Click to collapse
No, you shouldn't have to root your device in order to reflash the stock ROM back onto it. Just download the stock ROM from Sammobile and use Odin to flash it back onto your device. It's as simple as that. But you will loose the root features after you do this.
djshubi said:
Yes, but to re-flesh i need first to root the device. this is where i'm struggling.
Click to expand...
Click to collapse
Flash the latest stock ROM for your model with Odin. Root is NOT required for STOCK ROM.
djshubi said:
Yes, but to re-flesh i need first to root the device. this is where i'm struggling.
Click to expand...
Click to collapse
Got to sammobile.com, create an account, it's free. Download stock firmware for you device.
Google search flash firmware with ODIN, you'll get a many web pages with instructions and there's a youtube video also.
https://www.google.com/search?espv=....0..0.0....0...1c..64.serp..0.0.0.cyqn6CcxG_E
DarkGuyver said:
From what I understand you should be able to reflash the stock Samsung ROM back onto your device. This will remove the root functions and restore your device back to when it left the factory.
Click to expand...
Click to collapse
Hi Guys,
Thank you for your responses, i have tried with Odin and downloaded the correct firmware from Sammobile (by verifying *#1234#) and after Odin pass successfully the device was not able to boot from the new firmware. so it rebooted again and returned to the former status (with all the apps and everything i currently still have ) means in other words Odin failed or i did something wrong.
i will keep trying. and update you.
Thanks,
Eyal.
dicksteele said:
Got to sammobile.com, create an account, it's free. Download stock firmware for you device.
Google search flash firmware with ODIN, you'll get a many web pages with instructions and there's a youtube video also.
https://www.google.com/search?espv=....0..0.0....0...1c..64.serp..0.0.0.cyqn6CcxG_E
Click to expand...
Click to collapse
Thank you Sir, im trying, first shot failed now going back to square 1
will update you, thanks for taking the time and answer.
djshubi said:
Thank you Sir, im trying, first shot failed now going back to square 1
will update you, thanks for taking the time and answer.
Click to expand...
Click to collapse
Well, at least you didn't brick your device. Follow this video from Sammobile on how to flash your device back to stock
djshubi said:
Thank you Sir, im trying, first shot failed now going back to square 1
will update you, thanks for taking the time and answer.
Click to expand...
Click to collapse
What did it fail on? If it was sboot.bon that's the bootloader and you need to get the same version that was previously on your phone (Didn't read the post above. Try below, that will probably work).
---------- Post added at 11:29 AM ---------- Previous post was at 11:28 AM ----------
djshubi said:
Hi Guys,
Thank you for your responses, i have tried with Odin and downloaded the correct firmware from Sammobile (by verifying *#1234#) and after Odin pass successfully the device was not able to boot from the new firmware. so it rebooted again and returned to the former status (with all the apps and everything i currently still have ) means in other words Odin failed or i did something wrong.
i will keep trying. and update you.
Thanks,
Eyal.
Click to expand...
Click to collapse
After it boots up and fails, go into the stock recovery and do a factory reset. That should bring it up.
Guys, thank you all for your help, it is really not obvios!!
end of the day, i was able to reflesh my phone, this didnt help, camerra still failed to open. im now stuck again, i will try to find our an official samsung dealer who fix HW (dont think i can find one, but lets give it a shot...
if you have other ideas... then you off course welcome
Thanks,
Eyal.

Fingerprint Not Responding

I updated my SmG935a to the latest firmware (pl2) via Odin, and when my phone booted up, I got a message saying that my "fingerprint scanner is not responding try again later" I've tried everything. Hopefully someone knows what is happening I really want that feature back. PLEASE HELP!!!!!!
To elaborate more, I am fully stock and on a clean factory reset state. If I need to get my phone replaced, does anybody know if I would get a new or refurbished one? I really don't want to give up my new phone for some refurbished one because the software broke
RileyIssKing said:
To elaborate more, I am fully stock and on a clean factory reset state. If I need to get my phone replaced, does anybody know if I would get a new or refurbished one? I really don't want to give up my new phone for some refurbished one because the software broke
Click to expand...
Click to collapse
If you are fully stock, unrooted. Clean flash. And the problem still persists. You could try a custom rom. See if the problem is still there. If it is. Go back to stock unrooted and claim your warranty.
Sent from my SM-G935F using Tapatalk
Michel habets said:
If you are fully stock, unrooted. Clean flash. And the problem still persists. You could try a custom rom. See if the problem is still there. If it is. Go back to stock unrooted and claim your warranty.
Click to expand...
Click to collapse
Would my warranty replace my phone with a brand new one? What custom roms would you suggest? I know that there is very little development for the AT&T version and I would get cyanogen but I don't believe it's exists for my phone yet. Anything helps! THANKS!!!
RileyIssKing said:
Would my warranty replace my phone with a brand new one? What custom roms would you suggest? I know that there is very little development for the AT&T version and I would get cyanogen but I don't believe it's exists for my phone yet. Anything helps! THANKS!!!
Click to expand...
Click to collapse
Your bootloader is locked. So that would mean you can't get a custom rom. You could however go back to a previous version of stock firmware. Install that one. And see upon setup if the fingerprint my works when setting up the lock screen. If it doesn't respond it's probably a hardware fault.
Would you get a new or refurbished one. Don't know. Call Sammy and ask
Sent from my SM-G935F using Tapatalk
Michel habets said:
Your bootloader is locked. So that would mean you can't get a custom rom. You could however go back to a previous version of stock firmware. Install that one. And see upon setup if the fingerprint my works when setting up the lock screen. If it doesn't respond it's probably a hardware fault.
Would you get a new or refurbished one. Don't know. Call Sammy and ask
Click to expand...
Click to collapse
Thank you. I do not believe i can downgrade firmwares because the latest update updated the bootloader to rev4...
Michel habets said:
Your bootloader is locked. So that would mean you can't get a custom rom. You could however go back to a previous version of stock firmware. Install that one. And see upon setup if the fingerprint my works when setting up the lock screen. If it doesn't respond it's probably a hardware fault.
Would you get a new or refurbished one. Don't know. Call Sammy and ask
Click to expand...
Click to collapse
So I went to best buy where they had a Samsung center and the guy three ran a diagnostic and he got nothing wiring with the device and refused to let me have my phone replaced under a warranty. Should I try the AT&T store?
RileyIssKing said:
So I went to best buy where they had a Samsung center and the guy three ran a diagnostic and he got nothing wiring with the device and refused to let me have my phone replaced under a warranty. Should I try the AT&T store?
Click to expand...
Click to collapse
If Knox has not been tripped. So of it says 0x0 instead of 0x1. And you are in your warranty period. Then you should do a clean install. Totally clean. Just to be sure. Remove the SD card. And try again. If it still says failed. Then I should contact the retail store where you got it. If device says faulty finger print sensor I would get it fixed. u bought a expensive phone. It should work. An error is en error for a reason.
Sent from my SM-G935F using Tapatalk

The weirdest problem ever !!

I just had very weired problem and I need your help !!
My note 3 N9005 just stopped recognizing touches on the screen ! And only respond to S pen !!
I was on magma mx note7 port rom but I don't think it is rom related because even in the TWRP it is the same
Is that a hardware fault? Or There is a hope that it is a software related to modem or firmware?
I flashed RR but still the same issue!
Seeking your experience opinions
Thank you
Usual answer .
Restore to stock firmware first .
JJEgan said:
Usual answer .
Restore to stock firmware first .
Click to expand...
Click to collapse
Can you provide me a link to stock firmware??!
Google didn't help
aymahalawa said:
I just had very weired problem and I need your help !!
My note 3 N9005 just stopped recognizing touches on the screen ! And only respond to S pen !!
I was on magma mx note7 port rom but I don't think it is rom related because even in the TWRP it is the same
Is that a hardware fault? Or There is a hope that it is a software related to modem or firmware?
I flashed RR but still the same issue!
Seeking your experience opinions
Thank you
Click to expand...
Click to collapse
Yep. Try restoring do stock, change bootloader too... And also, fix partitions and download an app to test hardware!
My first try would be to flash a bootloader. I think you flashed a broken one or the wrong on! Be sure it really flashed, because sometimes even when Odin says everything went ok, iit may have failed. You have to take off your battery, go into download mode and do it.
In the old days, that happened to Brazilian Galaxy S1 and was related to bootloader!
Keep us updated, friend! Best of luck
aymahalawa said:
Can you provide me a link to stock firmware??!
Google didn't help
Click to expand...
Click to collapse
This forum .
Sammobile dot com
samsung-updates dot com .
OK , so now i have downloaded the latest official firmware and flashed it with odin .
Still the same problem persisted . the phone doesn't recognise the finger touch and only SPen is recognized!!!
Any thoughts guys ?
Sent from my Nexus 7 using Tapatalk
Service Repair center .
@sauliiin can you confirm the bootloader version is correct or i need to upgrade
Product Code: SM-N9005ZWEXSI
PDA: N9005XXUGBOEA
CSC: N9005OJVGBOE4
Baseband: N9005XXUGBOD3
Bootloader: N9005XXUGBOK9
Sent from my Nexus 7 using Tapatalk
i have this problem too but screen touch by it self some times and some time is ok
aymahalawa said:
@sauliiin can you confirm the bootloader version is correct or i need to upgrade
Product Code: SM-N9005ZWEXSI
PDA: N9005XXUGBOEA
CSC: N9005OJVGBOE4
Baseband: N9005XXUGBOD3
Bootloader: N9005XXUGBOK9
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
Hi mate! Are you using an international sm N9005, right?
You are using an old bootloader. Try this one... I think is the latest: https://drive.google.com/open?id=0BwT0le3Vxg5OQ1VmakNkc19Od2c
Btw, have you tried a clean install of a stock Rom and no luck? Have you changed kernel?
sauliiin said:
Hi mate! Are you using an international sm N9005, right?
You are using an old bootloader. Try this one... I think is the latest: https://drive.google.com/open?id=0BwT0le3Vxg5OQ1VmakNkc19Od2c
Btw, have you tried a clean install of a stock Rom and no luck? Have you changed kernel?
Click to expand...
Click to collapse
Yes , the N9005 version .
I did clean install through odin for the firmware but the problem persist , i will try to update the bootloader through Odin and check , thanks for sharing the file
I don't want to give up because it doesn't make any sense for me , if the touch driver is damaged, how the Spen works like a charm ?!!!
aymahalawa said:
Yes , the N9005 version .
I did clean install through odin for the firmware but the problem persist , i will try to update the bootloader through Odin and check , thanks for sharing the file
I don't want to give up because it doesn't make any sense for me , if the touch driver is damaged, how the Spen works like a charm ?!!!
Click to expand...
Click to collapse
Yep! I agree with you! Best of luck!
Most likely the digitizer is faulty, get it replaced. As for the S Pen, it has nothing to do with the digitizer as it uses the S Pen sensor film which lies behind the screen AFAIK..
waqaswasil said:
Most likely the digitizer is faulty, get it replaced. As for the S Pen, it has nothing to do with the digitizer as it uses the S Pen sensor film which lies behind the screen AFAIK..
Click to expand...
Click to collapse
Do you think this could be related to root? I remember when I rooted my Sm-n900w8 on lollipop, after I rooted, the soft keys stopped responding and only S-PEN work, but the touchscreen itself was fine.
But there was a fix, you flash this file which fix the touch key. There is an xda thread on this but I'm not allowed to post links. But what I'm saying is, maybe there is a similar method to repair software?
I am afraid, it is gone.
As far as I know brother, the Galaxy Note series uses two digitizers (combined to one) with different voltages (minor difference, but enough the differentiate finger and S-Pen). One of your digitizer is dead.
You now need to try some weird steps for your weird issue.
First thing you can try is Battery Simulation. To perform battery simulation, press and hold the volume down key and power key for 10-20 seconds. Select power down from the menu you see. Turn your phone after 10 minutes and check if problem persists.
Second thing you can try is, take out all your data (backup), switch off your phone, completely charge it and remove battery. To make sure no static current stays inside the phone, while your battery is out, connect headphones, insert a cable with no charger (I repeat, without charger) on the other end and touch your screen with S-Pen. After you have done all this nonsense, remove cable and headphones, re-insert the S-Pen and battery.
After that, from ODIN, do a "Complete flashing" by selecting "Auto Reboot", "F. Reset Time" and "NAND Erase All".
Most threads do not recommend "NAND Erase" for some reaso. I always do it, and have been doing since 2 years without a problem. Rewards? My Note 3 is still blazing fast, though it involves lot of steps while installation which I do not advice to anyone else.
Summary: You need a screen replacement, but before that, give your last attempt, with "NAND Erase All".
Note: It's better to get the latest firmware for your carrier/country. Google SamMobile.
Sorry if nothing helps.
hi! I have the inverted problem. My s pen some times works some times is death, I mean sometime it doest recognize the deattachment of pen sometimes it does. I tried factory reset wipe cache and notting. but some times works..I dont know what is this =S any help?
Mobita said:
hi! I have the inverted problem. My s pen some times works some times is death, I mean sometime it doest recognize the deattachment of pen sometimes it does. I tried factory reset wipe cache and notting. but some times works..I dont know what is this =S any help?
Click to expand...
Click to collapse
That sounds like a hardware issue to me. I think what may have happened is the S-PEN detach sensor inside the phone broke or some connecting circuit broke. Either way it doesn't sound like a software issue to me....
RQYP said:
That sounds like a hardware issue to me. I think what may have happened is the S-PEN detach sensor inside the phone broke or some connecting circuit broke. Either way it doesn't sound like a software issue to me....
Click to expand...
Click to collapse
And could be fixed?
Mobita said:
And could be fixed?
Click to expand...
Click to collapse
Potentially. If it's a hardware issue, watch some YouTube tutorials and then buy the right parts and fix it. If it's a software issue try flashing the latest bootloader/modem/stock rom for your phone and see if it fixes things.

Preparing for RMA

I am about to send my phone in for repair with Huawei to fix the usb-c port that is no longer rapid charging. I am on a custom Rom with bootloader unlocked.
Do I just need to return to stock prior to sending in the phone or is there anything else I need to do?
It probably isn't a problem, but I'd return to stock anyway. By the way, did you have to do anything special to get that RMA going? I'm dealing with Google support on my 6p and it is not going well.
Have you tried either reverting to stock or flashing a different ROM for the fast charging issue?
Killa357 said:
It probably isn't a problem, but I'd return to stock anyway. By the way, did you have to do anything special to get that RMA going? I'm dealing with Google support on my 6p and it is not going well.
Click to expand...
Click to collapse
I am dealing with Huawei directly. They've been great
redduc900 said:
Have you tried either reverting to stock or flashing a different ROM for the fast charging issue?
Click to expand...
Click to collapse
Yes tried multiple roms and stock
manalicream said:
I am about to send my phone in for repair with Huawei to fix the usb-c port that is no longer rapid charging. I am on a custom Rom with bootloader unlocked.
Do I just need to return to stock prior to sending in the phone or is there anything else I need to do?
Click to expand...
Click to collapse
Did you managed to reinstall stock?

Some problems on my nexus 6p

Hello, just bought a 2nd hand nexus 6p ... And I encountered some issues such as the mic where if I call somebody ... They can't quite hear me ...and then there's the camera which has focus issues... I had high hopes for this phone... I wonder if anybody can SHOw me any links or thread that might help me overcome this problem ?
P/s: I was wondering if I flash any custom ROMs... Will the problem stay ?
Thanks for helping !!
Kagetane Hiruko said:
Hello, just bought a 2nd hand nexus 6p ... And I encountered some issues such as the mic where if I call somebody ... They can't quite hear me ...and then there's the camera which has focus issues... I had high hopes for this phone... I wonder if anybody can SHOw me any links or thread that might help me overcome this problem ?
P/s: I was wondering if I flash any custom ROMs... Will the problem stay ?
Click to expand...
Click to collapse
I would try a factory reset first. If that doesn't work, unlock the bootloader, wipe the phone and flash the latest full Google ROM using flash-all.bat. There is a guide in the General Forum on how to do just that. This is going to tell you whether your phone is damaged or not. A custom ROM won't help a hardware issue.
v12xke said:
I would try a factory reset first. If that doesn't work, unlock the bootloader, wipe the phone and flash the latest full Google ROM using flash-all.bat. There is a guide in the General Forum on how to do just that. This is going to tell you whether your phone is damaged or not. A custom ROM won't help a hardware issue.
Click to expand...
Click to collapse
But the phone has never been rooted or flash a custom ROM... Its a 2nd hand phone but never been tweak before ... Do u think there's a chance it might be hardware problem ? Anyway ,, Thanks for replyinh ??

Categories

Resources