S7 Edge rebooting constantly - Samsung Galaxy S7 Edge Questions and Answers

Hi folks, my wife's S7 Edge kept on freezing then rebooted itself. I tried everything to try and fix it and then performed a factory reset. All seemed fine until Google Play Services needed updating to enable other Google Apps to work. As soon as the updated Google Play Services app tries to install, the phone reboots itself and sometimes goes into a boot loop. I've taken out the memory card, cleared the cache and data in Google Play Services as well.
Can anyone help with this?
The phone is on EE in the UK.
Thanks in advance
Sent from my SM-G935F using Tapatalk

damianmccoy said:
Hi folks, my wife's S7 Edge kept on freezing then rebooted itself. I tried everything to try and fix it and then performed a factory reset. All seemed fine until Google Play Services needed updating to enable other Google Apps to work. As soon as the updated Google Play Services app tries to install, the phone reboots itself and sometimes goes into a boot loop. I've taken out the memory card, cleared the cache and data in Google Play Services as well.
Can anyone help with this?
The phone is on EE in the UK.
Thanks in advance
Sent from my SM-G935F using Tapatalk
Click to expand...
Click to collapse
Same problem here.. sometimes my s7 edge turns off and back on randomly.. then stuck in a boot loop.. after a while it will boot normally. But that will take like an hour or something..
I did try to remove the sd card ect.. but still the same problem.
Don't know what causes the problem.. thought I had it after a system update a or 2 month ago...
Maybe flashing a new stock Rom with firmware will work?
But I do think know if that voids the warranty or trip the Samsung knox..
Kind Regards,
Toxicz

Toxicz01 said:
Same problem here.. sometimes my s7 edge turns off and back on randomly.. then stuck in a boot loop.. after a while it will boot normally. But that will take like an hour or something..
I did try to remove the sd card ect.. but still the same problem.
Don't know what causes the problem.. thought I had it after a system update a or 2 month ago...
Maybe flashing a new stock Rom with firmware will work?
But I do think know if that voids the warranty or trip the Samsung knox..
Kind Regards,
Toxicz
Click to expand...
Click to collapse
flashing stock rom does not void warranty or trip knox so dont worry about that i think you should download the latest firmware from Sammobile and flash it that should help

jetboss said:
flashing stock rom does not void warranty or trip knox so dont worry about that i think you should download the latest firmware from Sammobile and flash it that should help
Click to expand...
Click to collapse
Thanks for the information jetboss!
Does it matter if I flash a other kind of csc ect to the Galaxy s7 edge? I have read that you are able to flash the csc home if you want to keep your data. And the csc version if you want to completely wipe all the data on the phone..
I have a galaxy s7 edge (sm-g935f) from the Netherlands.
So downloading the latest Netherlands version on Sammobile should be fine?
Kind regards,
Toxicz

Toxicz01 said:
Thanks for the information jetboss!
Does it matter if I flash a other kind of csc ect to the Galaxy s7 edge? I have read that you are able to flash the csc home if you want to keep your data. And the csc version if you want to completely wipe all the data on the phone..
I have a galaxy s7 edge (sm-g935f) from the Netherlands.
So downloading the latest Netherlands version on Sammobile should be fine?
Kind regards,
Toxicz
Click to expand...
Click to collapse
well from experience the files from Sammobile are just the pda files i dont think you need to flash the csc unless you're using a rom from the different region, i could be wrong but just use the Netherlands version.

jetboss said:
well from experience the files from Sammobile are just the pda files i dont think you need to flash the csc unless you're using a rom from the different region, i could be wrong but just use the Netherlands version.
Click to expand...
Click to collapse
Alright, then I only need to flash the ap of the Dutch version? The biggest file like 4gb.

Toxicz01 said:
Alright, then I only need to flash the ap of the Dutch version? The biggest file like 4gb.
Click to expand...
Click to collapse
i just checked sammobile your file should be like 2gb

jetboss said:
i just checked sammobile your file should be like 2gb
Click to expand...
Click to collapse
Thanks, I only don't know what version I need to take. There are like 4 options to choose at the country.. is there any app that checks the csc / pda numbers?

Toxicz01 said:
Thanks, I only don't know what version I need to take. There are like 4 options to choose at the country.. is there any app that checks the csc / pda numbers?
Click to expand...
Click to collapse
ok lets see if i can help who is your carrier? ill try to send you a link

jetboss said:
ok lets see if i can help who is your carrier? ill try to send you a link
Click to expand...
Click to collapse
I bought my phone at the Samsung store online ( pre ordered ) with a vr gear.
I bought a sim only subscription at KPN from the Netherlands.

jetboss said:
ok lets see if i can help who is your carrier? ill try to send you a link
Click to expand...
Click to collapse
EE. I'm in the UK
Sent from my SM-G935F using Tapatalk

This also happened to me twice, but it only did in a SPECIFIC physical location, while I had bluetooth / wifi / location services on (in Rio's Olympics, just outside of the Beach volleyball arena). I had stock rom, ZTO (Brazil) CSC. My phone is the Edge, international variant (G935F).
It got me thinking if it could be something related to a Beacon (BLE) or something like that. It never happened again, ever, only in an exact location, specified above.

Related

[Q] Flashed stock rom, now no network?

Hi there, new to the forums posting but I read here constantly. I have an sm-900w8 note from Telus in Canada. I was running a custom rom before and decided I wanted to go back to stock before the Kitkat release. Anyway, I flashed the rom from sammobile.com that was for my phone (the link said it was for telus and the file even ends in TLS). So I flash it using odin and everything is perfect, the phone reboots and odin is finished. After that I decided I wanted to clear all my data and apps off the phone as well so I did a factory reset. The next time I turn the phone on everything is working (wifi gps ect) but I can't get on the network and it says I don't have a valid SIM. Also I notice the app packages from telus are not the correct ones and one of them is labelled Bell. So I am guessing the site has the bell firmware for telus as well? This doesn't matter to me but I do need my network running. Do you think it would just be a modem problem? Any information would be GREATLY appreciated guys!
Kevind_444 said:
Hi there, new to the forums posting but I read here constantly. I have an sm-900w8 note from Telus in Canada. I was running a custom rom before and decided I wanted to go back to stock before the Kitkat release. Anyway, I flashed the rom from sammobile.com that was for my phone (the link said it was for telus and the file even ends in TLS). So I flash it using odin and everything is perfect, the phone reboots and odin is finished. After that I decided I wanted to clear all my data and apps off the phone as well so I did a factory reset. The next time I turn the phone on everything is working (wifi gps ect) but I can't get on the network and it says I don't have a valid SIM. Also I notice the app packages from telus are not the correct ones and one of them is labelled Bell. So I am guessing the site has the bell firmware for telus as well? This doesn't matter to me but I do need my network running. Do you think it would just be a modem problem? Any information would be GREATLY appreciated guys!
Click to expand...
Click to collapse
The first and most important question: Do you have a backup of your EFS folder?
If so, you'll be happy. If not, prepare for the worst case scenario.
Kevind_444 said:
Hi there, new to the forums posting but I read here constantly. I have an sm-900w8 note from Telus in Canada. I was running a custom rom before and decided I wanted to go back to stock before the Kitkat release. Anyway, I flashed the rom from sammobile.com that was for my phone (the link said it was for telus and the file even ends in TLS). So I flash it using odin and everything is perfect, the phone reboots and odin is finished. After that I decided I wanted to clear all my data and apps off the phone as well so I did a factory reset. The next time I turn the phone on everything is working (wifi gps ect) but I can't get on the network and it says I don't have a valid SIM. Also I notice the app packages from telus are not the correct ones and one of them is labelled Bell. So I am guessing the site has the bell firmware for telus as well? This doesn't matter to me but I do need my network running. Do you think it would just be a modem problem? Any information would be GREATLY appreciated guys!
Click to expand...
Click to collapse
Seems you have installed a carrier FW on your device and it has SIM LOCKED it. try flashing another.
EDIT: @donalgodon - it's only really EFS when it boot loops and shows Android process not responding etc :good:
radicalisto said:
Seems you have installed a carrier FW on your device and it has SIM LOCKED it. try flashing another.
EDIT: @donalgodon - it's only really EFS when it boot loops and shows Android process not responding etc :good:
Click to expand...
Click to collapse
Well, that's not exactly accurate. The phone can boot with a corrupted EFS, but you will get no network access (and no IMEI number.)
It's happened to me, so I know it's possible. It's a common symptom of the OP's issues on Samsung devices.
radicalisto said:
Seems you have installed a carrier FW on your device and it has SIM LOCKED it. try flashing another.
EDIT: @donalgodon - it's only really EFS when it boot loops and shows Android process not responding etc :good:
Click to expand...
Click to collapse
Yeah I am sure I'm not in dire straights yet and lucily I have my backup phone to use for now. I am wondering though, sammobile is the most legit source for stock firmware around, do you guys have any suggestions? Or can I possibly even try just flashing a new modem through odin? (I have never done this but seems easy enough)
donalgodon said:
Well, that's not exactly accurate. The phone can boot with a corrupted EFS, but you will get no network access (and no IMEI number.)
It's happened to me, so I know it's possible. It's a common symptom of the OP's issues on Samsung devices.
Click to expand...
Click to collapse
True, however, OP states that it was Telus FW that was downloaded and flashed...but it's showing BELL.settings, So the probability of it being EFS is low, it's sim locked the device via the BELL firmware more than likely. Reflashing the correct or unbranded firmware will indeed fix it
---------- Post added at 07:28 PM ---------- Previous post was at 07:26 PM ----------
Kevind_444 said:
Yeah I am sure I'm not in dire straights yet and lucily I have my backup phone to use for now. I am wondering though, sammobile is the most legit source for stock firmware around, do you guys have any suggestions? Or can I possibly even try just flashing a new modem through odin? (I have never done this but seems easy enough)
Click to expand...
Click to collapse
Well Sammobile isn't immune to mistakes, but it's rare it happens, they're genuine enough.. You could try the modem, first thing I'd do is test the back up and see if it's the downloaded ROM that has cause the issue.
And yes, you can flash the modem via Odin.
Hey guys... update :
Used #*272 and changed csc from bell to Telus. Fixed instantly!
Thanks for your help guys.
Sent from my SM-N900W8 using xda app-developers app
Kevind_444 said:
Hey guys... update :
Used #*272 and changed csc from bell to Telus. Fixed instantly!
Thanks for your help guys.
Sent from my SM-N900W8 using xda app-developers app
Click to expand...
Click to collapse
I thought this doesn't work in changing csc code. What's the full numbers you have to input, is it #*272*IMEI# ?

Firmware Cross-compatibility

was just wondering... since G900I and G900F have the same specs would it work if i flash the G900I firmware onto a G900F handset? just asking because i live in australia and i have the european handset G900F
p2nv said:
was just wondering... since G900I and G900F have the same specs would it work if i flash the G900I firmware onto a G900F handset? just asking because i live in australia and i have the european handset G900F
Click to expand...
Click to collapse
I think you have to take the lead, bro. Try it and share us with your result as it seems to me noone has done this before.
babygau said:
I think you have to take the lead, bro. Try it and share us with your result as it seems to me noone has done this before.
Click to expand...
Click to collapse
im just a little worried if anything could go wrong. i mean i have backed up everything... EFS, nandroid backup etc.
So worst case scenario it just wont boot yeh? i can install a G900F stock rom back on through odin and everything will be ok?
You will never know mate. The worst case is your device will be bricked ? it all depends on your nerve mate. There are still chances you could restore your bricked phone to normal by using odin, make sure you have a back up of your stock rom
My advice is to use custom rom
babygau said:
You will never know mate. The worst case is your device will be bricked ? it all depends on your nerve mate. There are still chances you could restore your bricked phone to normal by using odin, make sure you have a back up of your stock rom
My advice is to use custom rom
Click to expand...
Click to collapse
I tried it tonight. wouldnt allow the installation. must detect a different variant through odin. I did restore my backup.
Sent from my SM-G900F using Tapatalk
p2nv said:
I tried it tonight. wouldnt allow the installation. must detect a different variant through odin. I did restore my backup.
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
only thing that is pissing me off is that I think my handset got shipped with a faulty gps module and now that my knox counter is 1 my warranty is void. so basically everything on my phone works except for gps
Sent from my SM-G900F using Tapatalk
That sucks. I feel for you bro. But just to make sure it is defective. Flash the original region of your phone brand to test before jumping to that unfortunate conclusion
I live in australia and I bought a g900f which I believe is for uk or europe. For australia its g900i and I cannot install the firmware onto g900f. But when I installed gps toolbox it didn't even give me anything. I can understand its one thing to take a long time to get a lock but not seeing any satellites at all is another thing. Ive tried around 10 different gps.conf files designed for australia satellites
Sent from my SM-G900F using Tapatalk
p2nv said:
I live in australia and I bought a g900f which I believe is for uk or europe. For australia its g900i and I cannot install the firmware onto g900f. But when I installed gps toolbox it didn't even give me anything. I can understand its one thing to take a long time to get a lock but not seeing any satellites at all is another thing. Ive tried around 10 different gps.conf files designed for australia satellites
Sent from my SM-G900F using Tapatalk
Click to expand...
Click to collapse
Ok, you can do it.
I intended to test it myself first coz I wanted to flash G900F on my G900I in reverse.
Now it's impossible for me coz unfortunately I have been ended up with downloading corrupted firmware due to unreliable internet connection (5 times 2day so far)
If you're desparate to flash G900I, you MUST back up your current firmware PIT file. In case you fail to flash G900I firmware, that PIT file will be used along with your stock firmware to recover your phone to its pristine state.
To do it, please follow this guide , if you're using G900I 16Gb, you could download the PIT file from the OP immediately.
Hope it could help you, please let me know with your attempt. I'd like to help you out in case any thing goes wrong with your phone
babygau said:
Ok, you can do it.
I intended to test it myself first coz I wanted to flash G900F on my G900I in reverse.
Now it's impossible for me coz unfortunately I have been ended up with downloading corrupted firmware due to unreliable internet connection (5 times 2day so far)
If you're desparate to flash G900I, you MUST back up your current firmware PIT file. In case you fail to flash G900I firmware, that PIT file will be used along with your stock firmware to recover your phone to its pristine state.
To do it, please follow this guide , if you're using G900I 16Gb, you could download the PIT file from the OP immediately.
Hope it could help you, please let me know with your attempt. I'd like to help you out in case any thing goes wrong with your phone
Click to expand...
Click to collapse
ok, so here is the update. since installing G900I firmware failed through odin due to bootloader incompatibility i managed to install it through mobile odin. worked like a charm and even had the telstra bootanimation lol. wifi, bluetooth and everything seemed to be working fine. however my gps is still not working and the G900I seems to have the same gps.conf file as the euro version. i definately believe my gps module is either faulty or not connected to the board properly. is there any app that can tell if the gps module is even there or turned on as no one else is having this problem.
p2nv said:
ok, so here is the update. since installing G900I firmware failed through odin due to bootloader incompatibility i managed to install it through mobile odin. worked like a charm and even had the telstra bootanimation lol. wifi, bluetooth and everything seemed to be working fine. however my gps is still not working and the G900I seems to have the same gps.conf file as the euro version. i definately believe my gps module is either faulty or not connected to the board properly. is there any app that can tell if the gps module is even there or turned on as no one else is having this problem.
Click to expand...
Click to collapse
I'm glad you could pull it off
I think you should send your phone to your carrier customer service, they will sort out your gps issue
babygau said:
I'm glad you could pull it off
I think you should send your phone to your carrier customer service, they will sort out your gps issue
Click to expand...
Click to collapse
how? my knox counter is 0x1
i rang samsung service centre today and they said no because you have tripped knox. i even offered to pay for them to fix the gps module and they said no. i was like wtf?
p2nv said:
how? my knox counter is 0x1
i rang samsung service centre today and they said no because you have tripped knox. i even offered to pay for them to fix the gps module and they said no. i was like wtf?
Click to expand...
Click to collapse
Call them again, said you don't know anything but GPS is faulty
Try this link as well: http://cybersvc2.samsungcsportal.com/cyberservice/csc/account/login01.jsp?locale_id=au_nz
babygau said:
Call them again, said you don't know anything but GPS is faulty
Try this link as well: http://cybersvc2.samsungcsportal.com/cyberservice/csc/account/login01.jsp?locale_id=au_nz
Click to expand...
Click to collapse
they said i couldnt anyway because i bought phone from kogan. they said i have to go through kogan.
i can't remember if gps was working before i rooted phone. couldn't have been because everyone else running alliance rom said they havent got problems with gps so it must be a fault unit. im going to take it to a phone repair shop and see if they can fix the gps module.

[Q] Reinstall bloatware before update

Hi my i9505 is rooted and I deleted the Vodafone bloat ware from it, my question is this,.......how do I reinstall the bloat ware before I update to 4.4 or don't I need too (I read it's dangerous to update if you have removed bloat ware from your phone, or is this untrue, any help would be greatly appreciated.
Kinds Regards
PS Before I forget how come some firmware from some sites say 4.4 Vodafone Australia, and some just say 4.4 Australia, does this means it will work with any i9505 or is it just they forgot to put in the carrier ??, my phone isn't locked but had some of the Vodafone bloat ware on it before I rooted and removed it.
@da20valve
Lol. No one forgot to put the carrier. Some firmwares are unbranded and some are branded.
The branded ones work with the carrier locked phones.
Unbranded ones work with the unlocked ones i.e. those who dont have a carrier locking
And it is safe to flash even if you have removed the bloat as when you flash a new firmware everything will return.
And yes. Backup the EFS folder (use the play store to download a efs backup software with highest rating) before you flash even the Official Firmwares.
"If someone helps, never forget to hit thanks ? "
So does that mean since mine is now unlocked even though it was from Vodafone originally I can use the unbranded ones ? (and if its the wrong one will it hurt the phone), also I just downloaded and Jwarriors EFS Backup Tool and saved it to my SD card, thanks for your help, I hit the thanks button.
Cheers
da20valve said:
So does that mean since mine is now unlocked even though it was from Vodafone originally I can use the unbranded ones ? (and if its the wrong one will it hurt the phone), also I just downloaded and Jwarriors EFS Backup Tool and saved it to my SD card, thanks for your help, I hit the thanks button.
Cheers
Click to expand...
Click to collapse
Haha.
Yes now your phone is unbranded and nothing can lock it now.
Still let @MAX 404 confirm this
"If someone helps, never forget to hit thanks ? "
da20valve said:
So does that mean since mine is now unlocked even though it was from Vodafone originally I can use the unbranded ones ? (and if its the wrong one will it hurt the phone), also I just downloaded and Jwarriors EFS Backup Tool and saved it to my SD card, thanks for your help, I hit the thanks button.
Cheers
Click to expand...
Click to collapse
DeepankarS said:
Haha.
Yes now your phone is unbranded and nothing can lock it now.
Still let @MAX 404 confirm this
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
+1
No need to reload bloatware , you can use any stock firmware in your phone as long as is for your S4 model (i9505)
MAX 404 said:
+1
No need to reload bloatware , you can use any stock firmware in your phone as long as is for your S4 model (i9505)
Click to expand...
Click to collapse
no worries I will use the Optus Australia version, can anyone point me to a how to for the flash
Thanks
da20valve said:
no worries I will use the Optus Australia version, can anyone point me to a how to for the flash
Thanks
Click to expand...
Click to collapse
hi mate
This is the latest for Optus
http://www.sammobile.com/firmwares/download/37801/I9505XXUGNH6_I9505OPSGNH2_OPS.zip/
Instructions
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
I would do a backup first of your efs folder , any thing important and do a factory reset first.
MAX 404 said:
hi mate
Should I use the Optus one or the one that just says Australia ?, as mine phone was originally Vodafone would it really matter, if it doesn't why do they bother branding them. why don't they just build one for the 4 main carriers, or does the one that says Australia for all carriers.
Click to expand...
Click to collapse
da20valve said:
MAX 404 said:
hi mate
Should I use the Optus one or the one that just says Australia ?, as mine phone was originally Vodafone would it really matter, if it doesn't why do they bother branding them. why don't they just build one for the 4 main carriers, or does the one that says Australia for all carriers.
Click to expand...
Click to collapse
IMHO you should flash a non branded one.
Why flash the optus one? Just because youre using optus (guessed) does not mean you have to flash that.
And firmwares are branded because they carry specific modem reqirements for the carriers
"If someone helps, never forget to hit thanks ? "
Click to expand...
Click to collapse
Re root after 4.2 unbranded update
Okay since I installed 4.2 my phone is rebooting a ****load (during calls) and just sitting there, wondering would the problem could be, I have noticed there have been a few erros that have said "folder mount has stopped working, can I just uninstall this or doesn't it work like that, also I am not rooted anymore should I root now or wait to get the problem sorted out first.
I have the s4 black edition also Vodafone but no branding at all
Sent from my GT-I9505G using Tapatalk
da20valve said:
Okay since I installed 4.2 my phone is rebooting a ****load (during calls) and just sitting there, wondering would the problem could be, I have noticed there have been a few erros that have said "folder mount has stopped working, can I just uninstall this or doesn't it work like that, also I am not rooted anymore should I root now or wait to get the problem sorted out first.
Click to expand...
Click to collapse
You need to do a factory reset and if that doesn't sort it try a different firmware.

S7 edge / s7 edge Dual sim G935FD = same firmware ???

I have the G935FD from UAE.
I have searched firmwares on sammobile but I think this is the same of G935F.
Could you confirm me ?
Yes it is. I even use DBT firmware for 935F in Germany, where no 935FD is on the market.
*SM-G935FD*
my battery life is not very good. i would like to update to the last firmware... and it's a little bit warm...
Which firmware are you using? I had very bad battery for the first 2 charges, barely 3 h SOT, third charge gave me good 7h SOT, so be patient and do use the app package disabler for samsung where you could disable services that only root can disable but without the need to root !!!
Sent from my SM-A9000 using XDA Free mobile app
kloodee said:
Which firmware are you using? I had very bad battery for the first 2 charges, barely 3 h SOT, third charge gave me good 7h SOT, so be patient and do use the app package disabler for samsung where you could disable services that only root can disable but without the need to root !!!
Sent from my SM-A9000 using XDA Free mobile app
Click to expand...
Click to collapse
I have the firmware G935FXXU1APAW from UAE.
Dual SIM features
scampstom said:
Yes it is. I even use DBT firmware for 935F in Germany, where no 935FD is on the market.
*SM-G935FD*
Click to expand...
Click to collapse
Hi! I'm wondering if installing a firmware like the one you were talking about (DBT Germany) will keep anyway all dual sim features or if I loose them.
Can you confirm?
TKS
silfrat said:
Hi! I'm wondering if installing a firmware like the one you were talking about (DBT Germany) will keep anyway all dual sim features or if I loose them.
Can you confirm?
TKS
Click to expand...
Click to collapse
I did not lose dual-sim functions of SM-G935FD by using DBT-Single-Sim-Firmware for SM-G935F. But: all available firmwares are splitted into 4 parts. By flashing you lose all data, so flash before using the phone
scampstom said:
I did not lose dual-sim functions of SM-G935FD by using DBT-Single-Sim-Firmware for SM-G935F. But: all available firmwares are splitted into 4 parts. By flashing you lose all data, so flash before using the phone
Click to expand...
Click to collapse
Now the firmware contains 5 files inside.
The question is how the CSC file, what use?
With "HOME" in the name or the other?
I have used the normal CSC (including PIT-file?) and not the Home-CSC (excluding PIT-file?) and everything works like a charm.
scampstom said:
I have used the normal CSC (including PIT-file?) and not the Home-CSC (excluding PIT-file?) and everything works like a charm.
Click to expand...
Click to collapse
i don't understand how do you make the update... I use Odin.
ilan78 said:
i don't understand how do you make the update... I use Odin.
Click to expand...
Click to collapse
I use Odin too. I'm downloading the firmware from SAMMOBILE, but as usual is only one file (PDA).
ilan78 said:
i don't understand how do you make the update... I use Odin.
Click to expand...
Click to collapse
Load the 4 parts in the related columns CSC in CSC, AP in AP, BL in BL... and everything else like always.
scampstom said:
Load the 4 parts in the related columns CSC in CSC, AP in AP, BL in BL... and everything else like always.
Click to expand...
Click to collapse
And Which could i not change to keep dual sim? Somebody could help me?
? You should use all 4 parts without home-CSC and you will keep dual-sim functionality anyway.
scampstom said:
? You should use all 4 parts without home-CSC and you will keep dual-sim functionality anyway.
Click to expand...
Click to collapse
ANd like this i lost my data or it lost nothing?
you will lose your data and everything is in factory default Settings again.
oh noooo
scampstom said:
? You should use all 4 parts without home-CSC and you will keep dual-sim functionality anyway.
Click to expand...
Click to collapse
I'm going tough Dubai soon and they only sell the duos G935FD in the duty free. £100 cheaper than UK.
I take it from what your saying there's no real down side to the G935FD if I decide to flash or root?
ben83s said:
I'm going tough Dubai soon and they only sell the duos G935FD in the duty free. £100 cheaper than UK.
I take it from what your saying there's no real down side to the G935FD if I decide to flash or root?
Click to expand...
Click to collapse
If you root, you trigger knox -> No fingerprint, no KNOX security, no Samsung Pay...and it's permanent.
Samsung has implemented region restriction to almost all newer galaxies. If you are gonna buy from UAE and use it elsewhere, make sure you make/receive call for cumulative duration of at least 15 minutes using the middle eastern SIM card to remove the restriction. It's just a measure by Samsung to prevent grey market.
*This is not SIM-lock or operator lock*
ilan78 said:
ANd like this i lost my data or it lost nothing?
Click to expand...
Click to collapse
Have a look here:
http://forum.xda-developers.com/s7-edge/how-to/official-stock-firmware-update-odin-t3335065

[INSTALLED] SM-G935U over SM-G935T Firmware? What's so good about Un

Hello XDA Family
I recently flashed G935U Firmware *4API3 over G935T *4APIA, last night to be precise and right off the bat I must say that INDEED IT IS AND FEELS FASTER THAN STOCK *4APIA. You can just UNINSTALL instead of DISABLING bloat apps.
But other than the debloated firmware, what can we get about this Unlocked version? What is so good about it? Why SM-G935U over SM-G935T Firmware?
Pros & cons? Would you go back to stock?
Running September patch.
I'm still on APG1. Do you think it's safe to flash the API3 U firmware over it without taking t-mobiles PIA OTA?
I believe you would get the whitepages and tethering functions back.
chaose said:
I believe you would get the whitepages and tethering functions back.
Click to expand...
Click to collapse
Shhhh is a secret they listening!!
purotijuana said:
Hello XDA Family
I recently flashed G935U Firmware *4API3 over G935T *4APIA, last night to be precise and right off the bat I must say that INDEED IT IS AND FEELS FASTER THAN STOCK *4APIA. You can just UNINSTALL instead of DISABLING bloat apps.
But other than the debloated firmware, what can we get about this Unlocked version? What is so good about it? Why SM-G935U over SM-G935T Firmware?
Pros & cons? Would you go back to stock?
Running September patch.
Click to expand...
Click to collapse
i just did the same thing and i can already see that the U firmware is running faster than the t-mobile firmware im gonna play with it some more tonight and see what else i can do with it
Icebluemale30 said:
i just did the same thing and i can already see that the U firmware is running faster than the t-mobile firmware im gonna play with it some more tonight and see what else i can do with it
Click to expand...
Click to collapse
Hello there
Yeah so far so good. Have you encounteres any issues at all?
Godlike battery life.
Sent from my SM-G935U using XDA Labs
purotijuana said:
Hello there
Yeah so far so good. Have you encounteres any issues at all?
Godlike battery life.
Sent from my SM-G935U using XDA Labs
Click to expand...
Click to collapse
this was too good too be true everything works great except for two issues that i see so far the major issue i have is that cant receive any incoming text messages non at all ....and the second issue is not too major for me but it might be for other people there is no video calling icon in the dialer so im assuming that video calling is not working other than those two issues i hate that i have to flash back tmobile firmware but i need to be able to text and receive text i even tried other messaging apps like hangouts and facebook messenger and whatsapp dont work i even tried out allo just to make sure even reset APN setting and reconnected to other towers in my area it all seems hopeless any other ideas are very much welcomed.
Icebluemale30 said:
this was too good too be true everything works great except for two issues that i see so far the major issue i have is that cant receive any incoming text messages non at all ....and the second issue is not too major for me but it might be for other people there is no video calling icon in the dialer so im assuming that video calling is not working other than those two issues i hate that i have to flash back tmobile firmware but i need to be able to text and receive text i even tried other messaging apps like hangouts andfacebook messenger and whatsapp dont work i even tried out allo just to make sure even reset APN setting and reconnected to other towers in my area it all seems hopeless any other ideas are very much welcomed.
Click to expand...
Click to collapse
I don't have that problem,did you started fresh?
Icebluemale30 said:
this was too good too be true everything works great except for two issues that i see so far the major issue i have is that cant receive any incoming text messages non at all ....and the second issue is not too major for me but it might be for other people there is no video calling icon in the dialer so im assuming that video calling is not working other than those two issues i hate that i have to flash back tmobile firmware but i need to be able to text and receive text i even tried other messaging apps like hangouts and facebook messenger and whatsapp dont work i even tried out allo just to make sure even reset APN setting and reconnected to other towers in my area it all seems hopeless any other ideas are very much welcomed.
Click to expand...
Click to collapse
Incoming text messages was my stump too.. outgoing worked just fine but no incoming for me either.. swapped backed to tm firmware..
Sent from my SM-G935T using Tapatalk
purotijuana said:
Hello XDA Family
I recently flashed G935U Firmware *4API3 over G935T *4APIA, last night to be precise and right off the bat I must say that INDEED IT IS AND FEELS FASTER THAN STOCK *4APIA. You can just UNINSTALL instead of DISABLING bloat apps.
But other than the debloated firmware, what can we get about this Unlocked version? What is so good about it? Why SM-G935U over SM-G935T Firmware?
Pros & cons? Would you go back to stock?
Running September patch.
Click to expand...
Click to collapse
Hi, maybe a dumb question. Which Product Code had you picked? Im downloading the g935u XAA, or I need to download the g935u TMB? TIA
noobiedev83 said:
I don't have that problem,did you started fresh?
Click to expand...
Click to collapse
no i flashed it over my september patched software that i didn't factory reset i just flashed it cause i thought odin factory reset it anyway and i was putting new BL AP and all the other files
frostwildfire said:
Hi, maybe a dumb question. Which Product Code had you picked? Im downloading the g935u XAA, or I need to download the g935u TMB? TIA
Click to expand...
Click to collapse
No question is dumb my friend.
I downloaded the SM-G935U TMO ....the one for T-Mobile as there is an UNLOCKED version for every US Carrier.
I heard AT&T and T-Mobile are so far the best firmwares of them all.
Try downlading the SM-G935U(ending with *4API3*)
1. Make sure you use the LATEST ODIN VERSION (3.12.3)
2. Latest SAMSUNG USB DRIVERS (v15.61)
Sent from my SM-G935U using XDA Labs
Icebluemale30 said:
no i flashed it over my september patched software that i didn't factory reset i just flashed it cause i thought odin factory reset it anyway and i was putting new BL AP and all the other files
Click to expand...
Click to collapse
You have to FLASH ALL 4 FILES MY FRIEND.
AP, BL, CP, CSC ALL THE WAY!
Sent from my SM-G935U using XDA Labs
djr4x4 said:
Incoming text messages was my stump too.. outgoing worked just fine but no incoming for me either.. swapped backed to tm firmware..
Click to expand...
Click to collapse
Make sure you do a backup of what yoh currenty have, flash the G935U Firmware with ALL THE 4 FILES IN THEIR SLOTS.
After that, make sure to boot into recovery mode menu, wipe cache + data...reboot.
Try it.
Sent from my SM-G935U using XDA Labs
purotijuana said:
Make sure you do a backup of what yoh currenty have, flash the G935U Firmware with ALL THE 4 FILES IN THEIR SLOTS.
After that, make sure to boot into recovery mode menu, wipe cache + data...reboot.
Try it.
Sent from my SM-G935U using XDA Labs
Click to expand...
Click to collapse
I may try it again over the weekend.. So far since going back to the tm firmware ,my battery drain is gone.. battery life is superb once again. Thx for that info.. i flashed all 4 accordingly. Did not wipe cache + data.. that may have been the culprit.. we shall See..
Sent from my SM-G935T using Tapatalk
purotijuana said:
You have to FLASH ALL 4 FILES MY FRIEND.
AP, BL, CP, CSC ALL THE WAY!
Sent from my SM-G935U using XDA Labs
Click to expand...
Click to collapse
im sorry for the confusion i flashed all the files i thought i implied that just tried to paraphrase but yes i flashed all 4 files over my September install without factory reset and i did not go into setting and wipe dalvik cache either but the system did that automatically anyway IYO what should i do now i don't want to start all over again ( re flash tmb firmware then factory reset then flash U software Then set up again ) what should i do you think?
ok strange thing just happened now all of a sudden i started getting text from some of my friends like my friends that have i phone i get the text messages but anyone else only 1 android user i know i got messages from .....weird
Icebluemale30 said:
ok strange thing just happened now all of a sudden i started getting text from some of my friends like my friends that have i phone i get the text messages but anyone else only 1 android user i know i got messages from .....weird
Click to expand...
Click to collapse
If u had an iphone before u have to unlink ur phone number from imessage. Something like that happened to me that was not getting messages and that was the reason
Installed CSC as XAA variant, so far so good isnt laggy as tmo stock will report battery life after few days, text messages, data and calls are working fine.
Thank you OP
Maybe add the correct APN? for msg?
http://mms.msg.eng.t-mobile.com/mms/wapenc with type default,mms,supl,hipri

Categories

Resources