Related
Hi guys,
I've just brought this fantastic device, and I'm very happy about it. He is really snappy whit Nova launcher However I would like to receive some suggestions from you on how to get the best from our N10.
For example, I was thinking to install a custom rom and a custom kernel, but I rly don't know which and I don't know if they rly can give some advantages.
I was thinking something like purity rom (because of tweaked bionic and dalvik libraries) + KT Kernel (because it has been recently updated). Or maybe KT kernel + stock rom + ART
What do you think? Have you got any suggestion? Tell me
PS: sry for my bad English
Hi,
I've been using CyanogenMod 11 with its own kernel for some long time now, it never ceased to disappoint me! However, it's not recommendable creating threads asking for the "best kernel/ROM", the best thing to be done is downloading and trying yourself until you find something that suits well your needs . CM11 with NOVA Launcher was good enough for me hehe.
~Lord
XxLordxX said:
Hi,
I've been using CyanogenMod 11 with its own kernel for some long time now, it never ceased to disappoint me! However, it's not recommendable creating threads asking for the "best kernel/ROM", the best thing to be done is downloading and trying yourself until you find something that suits well your needs . CM11 with NOVA Launcher was good enough for me hehe.
~Lord
Click to expand...
Click to collapse
Eheh I know that, but I'm not a flash maniac, and rly I have fear to brick my device flashing and re-flashing roms on roms... That's why I'm asking your opinion. I would like to find immediately the best solution, flash it and then don't touch the device more.
However the for your opinion. I will keep it in mind
OmniSlyfer said:
Hi guys,
I've just brought this fantastic device, and I'm very happy about it. He is really snappy whit Nova launcher However I would like to receive some suggestions from you on how to get the best from our N10.
For example, I was thinking to install a custom rom and a custom kernel, but I rly don't know which and I don't know if they rly can give some advantages.
I was thinking something like purity rom (because of tweaked bionic and dalvik libraries) + KT Kernel (because it has been recently updated). Or maybe KT kernel + stock rom + ART
What do you think? Have you got any suggestion? Tell me
PS: sry for my bad English
Click to expand...
Click to collapse
I think that the first thing you need to ask yourself is what are your priorities with this device? For instance gaming performance, media consumption, is stability paramount... Etc?
You may want to start off with rooted stock and add the XPosed framework plus modules that give you custom ROM features particularly Gravity Box. If you need more then change your kernel (Franco, KTManta ... Etc). No matter which way you go take nandroid backups and save them off your device before making a significant change (kernel, custom ROM, moving away from stock). Your recovery of choice will provide you with the nandroid backup/recovery functions.
Also read, read... Knowing the focus of a specific kernel or ROM will help in making your choices balanced by the issues other users are having.
Good luck.
Sent from my Nexus 10 using XDA Premium HD app
3DSammy said:
I think that the first thing you need to ask yourself is what are your priorities with this device? For instance gaming performance, media consumption, is stability paramount... Etc?
You may want to start off with rooted stock and add the XPosed framework plus modules that give you custom ROM features particularly Gravity Box. If you need more then change your kernel (Franco, KTManta ... Etc). No matter which way you go take nandroid backups and save them off your device before making a significant change (kernel, custom ROM, moving away from stock). Your recovery of choice will provide you with the nandroid backup/recovery functions.
Also read, read... Knowing the focus of a specific kernel or ROM will help in making your choices balanced by the issues other users are having.
Good luck.
Sent from my Nexus 10 using XDA Premium HD app
Click to expand...
Click to collapse
Thank for the answer.
Yeah I always read all the feature of roms... But they never speak about optimization or performance. They always add features and options on Android but... Nothing I can't get with gravitybox.
What I need is smoothness. Not necessarily game performance, but speed while moving from app to app without microlag.
However, let me ask here other questions without opening another thread:
1)Is it normal that, when trying to access the recovery (my device is locked and not rooted) it display "no commands"? Do I need to unlock the device to get into recovery?
2) Can you suggest me a program make backups of my games saves and apps without root? Because I need to backups my data before unlocking the device...
OmniSlyfer said:
Thank for the answer.
Yeah I always read all the feature of roms... But they never speak about optimization or performance. They always add features and options on Android but... Nothing I can't get with gravitybox.
What I need is smoothness. Not necessarily game performance, but speed while moving from app to app without microlag.
However, let me ask here other questions without opening another thread:
1)Is it normal that, when trying to access the recovery (my device is locked and not rooted) it display "no commands"? Do I need to unlock the device to get into recovery?
2) Can you suggest me a program make backups of my games saves and apps without root? Because I need to backups my data before unlocking the device...
Click to expand...
Click to collapse
Well, I can't really speak on custom ROMs and kernels because I'm perfectly happy with running stock rooted with Xposed Framework on my N5, N7 (2013) and N10. But, to answer your questions:
1) Yes, it's normal. When you boot into Recovery, all you initially see is the android laying on his back with a red exclamation mark over him. In order to get the commands to show, you need to hit power + volume down (or maybe up, I always forget) at the same time. It can take a few tries with the buttons, but they'll eventually show up.
2) I believe an app called Helium is what you are looking for. I've never used it since I'm already rooted and use Titanium Backup, but I believe it kind of works the same as Titanium Backup.
charesa39 said:
I'm perfectly happy with running stock rooted with Xposed Framework on my N5, N7 (2013) and N10.
Click to expand...
Click to collapse
Do you mind providing the instructions of installing Xposed Framework on N4 and N10? Thanks a lot!
Nexus devices are very very hard to brick. Luckily. So no worries there mate. As for roms. Long story short: there is no best rom. If you want speed juat overclock the beast..
Sent from my Galaxy Nexus using xda app-developers app
mj56gt said:
Do you mind providing the instructions of installing Xposed Framework on N4 and N10? Thanks a lot!
Click to expand...
Click to collapse
No problem. Everything you need to know can be found in this thread: http://forum.xda-developers.com/xposed/framework-xposed-rom-modding-modifying-t1574401.
It's pretty straightforward. Just install the Xposed Installer apk, then go into the Xposed Installer app and hit "Install/Update". Reboot, and Xposed Framework should be installed. Then, just go back into the Xposed Installer app and click "Download" and choose whatever Modules you want to run. My personal favorites are Gravity Box, Unicon (purchased through the Play Store), Xuimod, and App Settings. I also have the Xposed GEL Settings (XGELS) Module, but only on my Nexus 10 since I love the Google Now Launcher, but it shrinks the icon grid considerably. So XGELS allows me to get the same number of icons on the GN Launcher as the default launcher.
Edit: Oh, and here is a collection of the Modules so you can see what each of them do: http://forum.xda-developers.com/xposed/modules/index-collection-xposed-modules-post-t2327541
charesa39 said:
No problem. Everything you need to know can be found in this thread: http://forum.xda-developers.com/xposed/framework-xposed-rom-modding-modifying-t1574401.
It's pretty straightforward. Just install the Xposed Installer apk, then go into the Xposed Installer app and hit "Install/Update". Reboot, and Xposed Framework should be installed. Then, just go back into the Xposed Installer app and click "Download" and choose whatever Modules you want to run. My personal favorites are Gravity Box, Unicon (purchased through the Play Store), Xuimod, and App Settings. I also have the Xposed GEL Settings (XGELS) Module, but only on my Nexus 10 since I love the Google Now Launcher, but it shrinks the icon grid considerably. So XGELS allows me to get the same number of icons on the GN Launcher as the default launcher.
Edit: Oh, and here is a collection of the Modules so you can see what each of them do: http://forum.xda-developers.com/xposed/modules/index-collection-xposed-modules-post-t2327541
Click to expand...
Click to collapse
Thanks a lot for the detailed help!
A couple of questions:
1) Is backup necessary before the installation?
2) Does the Enable Translucent Decor module hide the navigation and notification bars?
3) Would the installation of the Xposed framework interfere with the stock ROM updates later on?
Thanks again for your kind help...
mj56gt said:
Thanks a lot for the detailed help!
A couple of questions:
1) Is backup necessary before the installation?
2) Does the Enable Translucent Decor module hide the navigation and notification bars?
3) Would the installation of the Xposed framework interfere with the stock ROM updates later on?
Thanks again for your kind help...
Click to expand...
Click to collapse
No problem.
1) It's not really necessary, but before installing/flashing anything that can modify system files, I always think it's a good idea to make a backup beforehand. You never know. That being said, it's all really simple.
2) If you're talking about the solid black background in the notification and navigation bars, then yes. It doesn't completely get rid of them, it just makes the black bar transparent like it should be when using the Google Now Launcher. I don't use that specific module because I already use Gravity Box, and it already has that option to enable translucent decor. It works flawlessly. I don't know why Google said it causes issues on the Nexus 10. If you want to completely get rid of those two bars, you need to enable something like PIE controls and Expanded Desktop.
3) Yes. But the solution is simple. When you want to update via OTA, all you have to do is go into the Xposed Installer app, and under Framework, just click Uninstall. This replaces the modified Framework with the stock Framework so you can update via OTA without any issues. You don't even have to uncheck or uninstall your Modules or the Xposed Installer app itself. Then, after updating, you'll probably just have to re-root by flashing SuperSU in recovery (unless you have survival mode enabled). After that, simply go back into the Xposed Installer app, and under Framework again, click Install/Update. As long as you left your Modules as is, your setup should be back to how it was before you took the OTA.
Well guys, i think I'm going to install SlimKat 4.0 and KTmanta Kernel... I will tell you if I'm satisfied of my choice
Ok guys, I've done some tests and now I've decided too keep Purity rom + ART... And the results are incredible!
23000 score on Antutu benchmark
9000 with Quadrat
Incredible performances and a GREAT battery life, much better than stock rom with dalvik
I think that the tweaked ART and Kernel of Purity Rom deliver the best experience with our device. I suggest it, you will be surprised of the benefits you can get!
Thank to everyone who helped me in this thread
I have been very happy with my AOKP and Franco Kernel combination.
I've installed Purity ROM + ART and it's fast - but i still think stock 4.3 is faster. I tried KTManta and that didn't change things despite overclocking the CPU and GPU.Wish we could have ART on a 4.3 rom.
Are there any recommended 4.3 rom/kernel combos that give good performance?
Edit: First time i installed Purity I didn't install GApps. It was incredibily smooth and fast. After installing GApps, it became laggy again, similar to my experience of stock 4.4.2.
sheyac said:
I've installed Purity ROM + ART and it's fast - but i still think stock 4.3 is faster. I tried KTManta and that didn't change things despite overclocking the CPU and GPU.Wish we could have ART on a 4.3 rom.
Are there any recommended 4.3 rom/kernel combos that give good performance?
Edit: First time i installed Purity I didn't install GApps. It was incredibily smooth and fast. After installing GApps, it became laggy again, similar to my experience of stock 4.4.2.
Click to expand...
Click to collapse
Do you really find 4.3 faster then kitkat + art? It's really strange. Well I know that the latest jelly bean firmware maybe is built better than 4.4.2 (which has got some bugs here and there, and yeah I prefer JB device options format) but ART is unbeatable, except by a very well tweaked Dalvik library.
However I think I know maybe why Purity 4.4.2 seems laggy to you. Maybe it's Google now launcher + transparent status bar & notification bar.
I've changed the launcher to Nova (but u can use Apex and similar) and immediately disabled translucent bars. It's smooth like butter now. With tra translucent bars, instead, everything was a little laggy and not fluid. In particular the Drawer scrolling was clearly laggy.
So, try to Nandroid backup, flash again Purity + Gapps. Then change Launcher (and unistall the google one if u want) and disable translucent bars. Then activate ART.
That's what I've done and I'm very happy of the performance provided by my Nexus 10
Also now I'm trying KTmanta Kernel. I didn't found increased performances, but I really like the possibility to undervolt both CPU & GPU. Undervolt = less energy request = No overheat = best battery life
SmokinCharger said:
I have been very happy with my AOKP and Franco Kernel combination.
Click to expand...
Click to collapse
But it doesn't support Undervolting, am I right?
OmniSlyfer said:
But it doesn't support Undervolting, am I right?
Click to expand...
Click to collapse
Franco kernel supports undervolting
PHP:
SmokinCharger said:
Franco kernel supports undervolting
Click to expand...
Click to collapse
This is cool
I' going to test KTmanta for another week, then I will switch to Franco kernel to see which is better
Sure I agree the general UI and multitasking is snappier with 4.4.2 with ART than 4.3.1...BUT I primarily bought the nexus 10 to consume media (e.g. video, ebooks, music) and for me buttered AOKP 4.3 is much smoother when watching video than any 4.4.2 rom/kernel combo I tried. The trade off is a bit of stutter in the UI but I can live with that. Video was just terrible on 4.4.2, including audio sync lag and plenty of dropped frames.
Can't wait to see how 4.5 behaves with video as I really like ART!
Hi! I'm a pretty avid Moto X PE user (whose only now made an account ) and I have been experimenting Nougat ROMs. I've settled with (for a couple of weeks anyway) CrDroid v2.2, but after seeing that Resurrection Remix is being maintained again. I want help deciding.
First off, the ROMs that I need help comparing are LineageOS, AICP, RR, and CrDroid.
The most important aspects me are mostly features found on Stock, mostly gestures (camera and torch) as well as added features and camera startup time. Ambient display is also important, in case there are any differences between ROM's.
Also, is the ROM a CAF-based or AOSP? I prefer CAF.
Is it possible to play Pokemon Go on the ROM? If so, how? I can't get it to work on CrDroid. (Also Android Pay, I know it's a stretch, but can it work?)
Finally, what makes each ROM special? What features does it have that the others don't? Convince me to switch!
P.S. Anyone use Cloudpath at their institution? I haven't been able to get it to work on any of them!!!! I would like to save my data but I keep getting the "Your OS version is incompatible because your administrator has chosen not to enable it yet," even though they have. It's worked with custom roms on other devices before! Also, installing the certificates manually fails too and I have no idea why. But, this isn't the reason for this thread!
1 for other, Validus.
i ve got problems with every single nougat rom on my Moto X style
Currently running Dirty Unicorns 1/28/17 build. Apart from the flashlight not working, it's the smoothest and most battery friendly nougat rom I've tried so far.
My 2 cents, none of them are fully there as of yet. Each may do something the other may not but as of now, I would not recommend any. I would still give it time for each to improve. Out all I seem to have them the one with the least issues is Dirty Unicorn but even with that I have experienced lock ups.
I find tesla good not only because of feature's but also for stability
I can't say who's the best but am currently using Tesla (02/22 build) and am quite impressed.
Here's my review for that ROM;
https://forum.xda-developers.com/showpost.php?p=71186126&postcount=29
https://forum.xda-developers.com/showpost.php?p=71196401&postcount=30
Terkitoez said:
Currently running Dirty Unicorns 1/28/17 build. Apart from the flashlight not working, it's the smoothest and most battery friendly nougat rom I've tried so far.
Click to expand...
Click to collapse
Really? I installed their Feb release and so many things were not working.
Flashlight
Camera
YouTube
Many random glitches. Now I'm running their 10.5 everything is good except I have audio issues on speaker playback.
---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------
antariksh said:
I can't say who's the best but am currently using Tesla (02/22 build) and am quite impressed.
Here's my review for that ROM;
https://forum.xda-developers.com/showpost.php?p=71186126&postcount=29
https://forum.xda-developers.com/showpost.php?p=71196401&postcount=30
Click to expand...
Click to collapse
Is everything working?
digitalmahdi said:
Really? I installed their Feb release and so many things were not working.
Flashlight
Camera
YouTube
Many random glitches. Now I'm running their 10.5 everything is good except I have audio issues on speaker playback.
---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------
Is everything working?
Click to expand...
Click to collapse
So far yes. Running Tesla 2.22. Running great
digitalmahdi said:
Really? I installed their Feb release and so many things were not working.
Flashlight
Camera
YouTube
Many random glitches. Now I'm running their 10.5 everything is good except I have audio issues on speaker playback.
---------- Post added at 03:28 PM ---------- Previous post was at 03:26 PM ----------
Is everything working?
Click to expand...
Click to collapse
For me there are no bugs. There's a volume fix for that Speaker playback. That bug is there in all Nougat ROMs since last week as it was produced from LineageOS and all other use LOS as a base.
Here's the thread: https://forum.xda-developers.com/moto-x-style/general/solved-low-volume-nougat-custom-rom-t3559769
You just copy paste those files and set permission as rw-r--r-- Reboot and enjoy
Haven't found any bugs yet. Everything is smooth. All the features and services.
antariksh said:
For me there are no bugs. There's a volume fix for that Speaker playback. That bug is there in all Nougat ROMs since last week as it was produced from LineageOS and all other use LOS as a base.
Here's the thread: https://forum.xda-developers.com/moto-x-style/general/solved-low-volume-nougat-custom-rom-t3559769
You just copy paste those files and set permission as rw-r--r-- Reboot and enjoy
Haven't found any bugs yet. Everything is smooth. All the features and services.
Click to expand...
Click to collapse
I am having this issue on marshmallow version 10.5 dirty unicorns are you sure this fix works on this version too?
Tesla
digitalmahdi said:
I am having this issue on marshmallow version 10.5 dirty unicorns are you sure this fix works on this version too?
Click to expand...
Click to collapse
It should work with appropriate files and also the issue needs to be in those files. (If some other files is causing it then hard luck)
You can try it yourself though. Get the files from old build of Dirty Unicorns where it was working fine. Set the permission to rw-r--r--
Hope it works.
Or you can also take the Stock audio config files from Stock ROM. If Dirty Unicorn is based on CyanogenMod 13 then take the audio files from any CM13 build.
I'd like to ask a simple question, whether the NFC working normally or not...
DESCRIPTION
Hello everyone, I would like to share my work. After hours of hard work and several failed attempts I present to you iOS 11 App Open/Close Animation.
REQUIREMENTS
-Any custom recovery (eg. TWRP, CWM, Philz)
-Device running Android 5.0+
-Knowledge About Flashing
DISCLAIMER
I'm not responsible for anything. Try this on your own risks
SUPPORTED DEVICES
-Almost all
-Tested on Redmi 3S, Redmi Note 4, Canvas Spark, Xperia X, One Plus 3T, Yu Yureka Plus
IMPORTANT NOTE
-This installer will automatically create a backup of stock Animation. The file will be saved on Internal storage. And the file name will be shown in TWRP during installation. So don't worry about soft bricks.:silly:
CREDITS
-iOS
-Me
DOWNLOAD
[url]https://drive.google.com/file/d/0B7fIOZZgI8cVUzJyZVhoalBsaFk/view?usp=drivesdk
Hit Like if you liked my work...
Enjoy folks
Happy Flashing!!!!
Confirmed to oneplus one
Oneplus one+MM+RR remix rom works perfectly.
Thank you for post this amazing Mod
How would I revert to the normal animation after installing this?
Worked on Axon 7 AospExtended ROM. Thanks mate.
Xperia SP running StryFlex Marshmallow 2.0 (6.0.1)
The open animation remains the Marshmallow Reveal effect, but the close animation works.
Awesome!
Man, it's too good. Without XDA news, I might never know about this.
Generic Asian Guy said:
How would I revert to the normal animation after installing this?
Click to expand...
Click to collapse
Flash and read the recovery text.
xezrunner said:
The open animation remains the Marshmallow Reveal effect, but the close animation works.
Click to expand...
Click to collapse
Same for me, op3t,mm, Nova launcher
Skull97 said:
Man, it's too good. Without XDA news, I might never know about this.
Flash and read the recovery text.
Click to expand...
Click to collapse
Thanks!
Seems cool! I gotta try it out
Add the following additional stuff and the transformation is close to complete, I guess
https://forum.xda-developers.com/android/themes/make-android-look-ios-10-t3510419
I flashed the revert zip, but it didn't work. How to fix that?
Confirmed working on Xiaomi Mi3 with crDroid ROM. But I don't like it so I reverted back.
It's working fine Galaxy grand duos
7.1 RR, but I couldn't find backup. I wanted to go back.
Confirmed working on Xperia Z2 on 7.1.2 ROMs, thanks for your good work. Please keep it up:good:
---------- Post added at 03:09 PM ---------- Previous post was at 03:05 PM ----------
G4B33 said:
Same for me, op3t,mm, Nova launcher
Click to expand...
Click to collapse
Custom launchers have custom launch animation, you may need to use the stock launcher to see the difference.
Nice, working on a HTC m8 /Nougat / RR , some apps not override the default animation (generally stock apps )
Opening animation not working on Nexus 6 stock from but closing animation does. Tried with both Nova and stock launcher
Thanks for this. Animation looks smooth.
Sent from my SM-N9005 RRN Rom using Tapatalk
Anyone knows if it exists something similar for the oxygenos animations and if someone can extract them for me?
Working fine and smooth on LineageOS 13.0, running on a Xiaomi Redmi 3S.
As far as I know it should work on any LineageOS 13 ROM too.
Thank you!
As seen in this thread on the main Treble dev forum, there is a move to separate the Treble development out so each device can have it's own forum. In order to get this moving, here's a place to discuss how project Treble has been working on your P10.
This should go without saying, but make sure you take a FULL BACKUP using TWRP and a FULL BACKUP of your Internal Storage copied to a PC before trying any of these ROMS!
Main Links to Phh's Treble Builds (including installation instructions)
-----------------------------------------------------------------------------------------------
AOSP - The main development port of the Android Open Source Project.
LineageOS - What used to be called CyanogenOS. More tweaks than AOSP. Often abbreviated to LOS.
ResurrectionRemix - Even more tweaks than LOS.
Ressurection Remix (Official) - And official release from the RR team!
Stock Huawei Camera - So you can reanable the stock dual-lens camera once a Treble build is installed.
TWRP
-----------------------------------------------------------------------------------------------
TWRP 3.2.1-0 for P10 v0.1 [Link to post from Pretoriano80] - tested backup/restore of stock 8.0.0 Huawei ROM
TWRP 3.2.1-0 for P10 Plus [Link to thread from blackball] - This may be better for 8.1-based ROMs.
Current Bugs [Updated 2018-05-06]
-----------------------------------------------------------------------------------------------
[RR - Official] [2018-07-16]
- No WiFi calling
[RR] [2018-05-06] [actinhic]
- RR from phh is almost perfect, only BT is reluctant...
[AOSP] [2018-04-24] [hamuts]
- Eye comfort did not work.
- Auto-brightness did not work. That wasn't the main problem, but I could live with that as long as I can see anything at all .
- Google Apps did not work. This was the real dealbraker. At first I couldn't download *any* app from Google Play Store. I tried factory reset (twice) and still no luck. Then after a night I tried to download and it downloaded (I went to Google site where you can white-list your device) but when I tried to open any app that I've downloaded they crashed. Anything that was somehow attached to Google services didn't work.
Returning to Official Stock Firmware
-----------------------------------------------------------------------------------------------
1. Boot into the bootloader and install Pretoriano's TWRP
2. Use the full "format data" option in TWRP
3. Use the script provided by Jannomag to install the same official firmware (Full-OTA) you have a TWRP backup for.
4. The stock firmware should boot correctly. You can use this if you didn't have a TWRP backup.
5. Boot into the bootloader again and install Pretoriano's TWRP for a second time
6. Restore your TWRP backup
7. Your previous Huawei stock firmware will now boot correctly.
Friend have you already installed any of these roms in huawei p10?
I've tried the LineageOS rom. It's stable but not perfect. It lacks auto brightness and that was a deal breaker for me.
AlmightyTritan said:
I've tried the LineageOS rom. It's stable but not perfect. It lacks auto brightness and that was a deal breaker for me.
Click to expand...
Click to collapse
Can you tell me how to install the rom?
DarkPJV said:
Can you tell me how to install the rom?
Click to expand...
Click to collapse
No, but I can link you to a really nice guide! https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
AlmightyTritan said:
No, but I can link you to a really nice guide! https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
Click to expand...
Click to collapse
But you know how to return to stock rom. To be sure of being able to return if something goes wrong
DarkPJV said:
But you know how to return to stock rom. To be sure of being able to return if something goes wrong
Click to expand...
Click to collapse
I just made a backup with TWRP and restored to it.
No
AlmightyTritan said:
I just made a backup with TWRP and restored to it.
Click to expand...
Click to collapse
Thanks friend I will install linage 15.1. question the rom works with fast charge as in stock And if any TWRP works in linageOS 15.1 . Sorry for so many questions
The main reason for me for using EMUI is the home button. I love it how Huawei got it working with these gestures and don't want to miss it.
I tried Lineage a few weeks ago but even with gestures apps it wasn't really a great experience. It would be nice if someone get this feature for AOSP.
Hi. How can I restore my p10 if I have a problem with the rom!?
friends someone knows how to install the gapps to this rom linageOS 15.1.help
Hi there. there is something i would like to know. i have a huawei p10 frd-l09 and i know it's treble supported. has anyone tried aosp 8.1 GSI on this model? if so, how does it run? does everything work just fine? is it stable enough for daily use? thanks.
GBTEK said:
Hi there. there is something i would like to know. i have a huawei p10 frd-l09 and i know it's treble supported. has anyone tried aosp 8.1 GSI on this model? if so, how does it run? does everything work just fine? is it stable enough for daily use? thanks.
Click to expand...
Click to collapse
I will try project treble tonight on my VTR-L29 huawei p10. Will come back with impressions.
Hopefully its easy to go back to EMUI after.
---------- Post added at 09:11 PM ---------- Previous post was at 09:08 PM ----------
Jannomag said:
The main reason for me for using EMUI is the home button. I love it how Huawei got it working with these gestures and don't want to miss it.
I tried Lineage a few weeks ago but even with gestures apps it wasn't really a great experience. It would be nice if someone get this feature for AOSP.
Click to expand...
Click to collapse
You could just use x home bar app from play store and get rid of nav bar keys.
GBTEK said:
Hi there. there is something i would like to know. i have a huawei p10 frd-l09 and i know it's treble supported. has anyone tried aosp 8.1 GSI on this model? if so, how does it run? does everything work just fine? is it stable enough for daily use? thanks.
Click to expand...
Click to collapse
FRD-L09 isn't a P10, it's a Honor 8 and XDA has forums for hits, too.
Don't know where you got the info fro. that you've a P10 - it hasn't even the same processor so the development is different for this phone even with treble.
I've tried the AOSP version 8.1 of phh-treble on my P10 (VTR-L29C432). It was overall great, snapy, clean and almost everything worked. I missed Huawei Camera app, but I clould live without it. Coulnd't test LED notification.
There was couple problems that I encounter:
- Eye comfort did not work.
- Auto-brightness did not work. That wasn't the main problem, but I could live with that as long as I can see anything at all .
- Google Apps did not work. This was the real dealbraker. At first I couldn't download *any* app from Google Play Store. I tried factory reset (twice) and still no luck. Then after a night I tried to download and it downloaded (I went to Google site where you can white-list your device) but when I tried to open any app that I've downloaded they crashed. Anything that was somehow attached to Google services didn't work.
At that point I gave up and restored my device to factory image (that also was a wild ride, but I'll leave it for another day).
Try RR remix rom great working p10!
https://forum.xda-developers.com/honor-view-10/development/rom-t3753555
Jannomag said:
FRD-L09 isn't a P10, it's a Honor 8 and XDA has forums for hits, too.
Don't know where you got the info fro. that you've a P10 - it hasn't even the same processor so the development is different for this phone even with treble.
Click to expand...
Click to collapse
sorry i meant vtr-l09
---------- Post added at 03:42 PM ---------- Previous post was at 03:37 PM ----------
hamuts said:
I've tried the AOSP version 8.1 of phh-treble on my P10 (VTR-L29C432). It was overall great, snapy, clean and almost everything worked. I missed Huawei Camera app, but I clould live without it. Coulnd't test LED notification.
There was couple problems that I encounter:
- Eye comfort did not work.
- Auto-brightness did not work. That wasn't the main problem, but I could live with that as long as I can see anything at all .
- Google Apps did not work. This was the real dealbraker. At first I couldn't download *any* app from Google Play Store. I tried factory reset (twice) and still no luck. Then after a night I tried to download and it downloaded (I went to Google site where you can white-list your device) but when I tried to open any app that I've downloaded they crashed. Anything that was somehow attached to Google services didn't work.
At that point I gave up and restored my device to factory image (that also was a wild ride, but I'll leave it for another day).
Click to expand...
Click to collapse
what a shame, i was hoping it would be usable but for the google apps, not working, it's a dealbreaker for me as well as i heavily rely on google services were you using the latest build of aosp with google apps pre-installed or you just tried the build without them? were you using the a-partition compatible build? thanks.
GBTEK said:
sorry i meant vtr-l09
---------- Post added at 03:42 PM ---------- Previous post was at 03:37 PM ----------
what a shame, i was hoping it would be usable but for the google apps, not working, it's a dealbreaker for me as well as i heavily rely on google services were you using the latest build of aosp with google apps pre-installed or you just tried the build without them? were you using the a-partition compatible build? thanks.
Click to expand...
Click to collapse
Well, I used AOSP with Google Apps preinstalled. Yes, I used A-partition compatible build since Huawei P10 A-partition only. I suppose that there was something wrong with that build, but I didn't want to flash TWRP since I didn't have access to stock eRecovery to revert back to stock.
hamuts said:
At that point I gave up and restored my device to factory image (that also was a wild ride, but I'll leave it for another day).
Click to expand...
Click to collapse
Could you share with us how did you manage to restore back to stock Oreo after trying this project. I'm facing issues flashing back stock files and was wondering if you could give me some advice. My e-recovery is not restoring files it just gives me error. restoring with twrp not working either. my fastboot is working and i have FRP Unlock if that is any help to you. im stuck with vanilla os without gapps. flashing just gapps gives me error with wrong version of os. it suggest it should be 7.1.2 package. my previous version of os was VTR-L29432c365.
thanks for any advice
maly82 said:
Could you share with us how did you manage to restore back to stock Oreo after trying this project. I'm facing issues flashing back stock files and was wondering if you could give me some advice. My e-recovery is not restoring files it just gives me error. restoring with twrp not working either. my fastboot is working and i have FRP Unlock if that is any help to you. im stuck with vanilla os without gapps. flashing just gapps gives me error with wrong version of os. it suggest it should be 7.1.2 package. my previous version of os was VTR-L29432c365.
thanks for any advice
Click to expand...
Click to collapse
It's a bit complicated with Huawei compared to other device as it doesn't come with any software that just resets the device back to its original state.
What you have to do is to download the firmware for the device manually (the full one) and flash it manually by adding it to a dload directory on your SD card. Just search Google on how to flash oreo with dload and you should find some tutorials.
Hope it helps
Hi, I have 6T and like OOS but still have sometimes issues, im just looking for another daily driver ROM (install and forget), with good battery (at least as OOS) and to be stable.
Im looking at
Paranoid Android
PiXeN-OS
HavocOS
Any tips ?
Hello Resurrection remix [emoji6]
Envoyé de mon ONEPLUS A6013 en utilisant Tapatalk
I just switched from OOS 10 to PiXeN OS, because of notification issues. Everything is working great now..... But I don't like the Pixel Launcher and tried running OP Launcher with Quickswitch and it wasn't adapting to the dark mode and it was glitching.... Kept going back to defaults layout after I restored it with my backup.
If I could get OP Launcher working.... It would be great.
Was able to learn how to get the OP Launcher in PiXeN OS. The latest patchable version QuickSwitch is able to patch is version OnePlus Launcher 4.4.8. Its stable and it has Google Feeds automatically. So far its stable and everything is working as it should....... Cant ask for more, Stable custom rom with stock OP camera, gallery and now OP launcher.
I've been using Bliss Rom for about a week and i'm pretty happy with it.
It has the OOS Cam as well as GCam, and both work well.
Danny1976 said:
Was able to learn how to get the OP Launcher in PiXeN OS. The latest patchable version QuickSwitch is able to patch is version OnePlus Launcher 4.4.8. Its stable and it has Google Feeds automatically. So far its stable and everything is working as it should....... Cant ask for more, Stable custom rom with stock OP camera, gallery and now OP launcher.
Click to expand...
Click to collapse
I flashed Pixen yesterday and op launcher didn't work for me. The only reason I did it was because I had read that it worked. Wiped and went back to stock. If only I had saw this first!
And away we go again lol. Round 2.are you using latest quickswitch and is that a modded apk for launcher or can I get it from apkmirror?
blaaaazedup said:
I flashed Pixen yesterday and op launcher didn't work for me. The only reason I did it was because I had read that it worked. Wiped and went back to stock. If only I had saw this first!
And away we go again lol. Round 2.are you using latest quickswitch and is that a modded apk for launcher or can I get it from apkmirror?
Click to expand...
Click to collapse
I found the solution here on Telegram {Mod edit}.... The Shady Mods OP Launcher 4.5.9 works perfectly without having to patch it with QuickSwitch. I installed the QuickSwitch that was on the Magisk module search and it was v3.1.6. I always use Titanium Backup to make the switch between Roms easier. I only restore apps and not the system files... Some apps you still have to setup again, but the majority Titanium Backup restores the data specially for games.
Basically you install the Systemless_OPLauncher-v3.0.zip with Magisk and use QuickSwitch to set OP Launcher as default (Select No when it ask to patch). Done. Works perfectly. I am on the latest OP Launcher. No issues and was able to restore my layout with my OOS backup. If you have a backup from OOS of your OP Launcher, you can use it to restore the launcher layout. You just unzip the net.oneplus.launcher.tar on the opbackup folder and copy it to the root /data/ data
OnePlus Launcher Mod Update
Date: 18-07-2020
Version: 3.0
Changelog:
• Updated OnePlus Launcher to v4.5.9
• Option to choose between Discover and Shelf inside Settings
• Added Asus Launcher, Paranoid Launcher
and Shady Launcher to replace list.
Download Link: {Mod edit}
File Name is Systemless_OPLauncher-v3.0.zip
blaaaazedup said:
I flashed Pixen yesterday and op launcher didn't work for me. The only reason I did it was because I had read that it worked. Wiped and went back to stock. If only I had saw this first!
And away we go again lol. Round 2.are you using latest quickswitch and is that a modded apk for launcher or can I get it from apkmirror?
Click to expand...
Click to collapse
Did you try the steps I posted?
Danny1976 said:
Did you try the steps I posted?
Click to expand...
Click to collapse
I did try those steps and everything worked perfectly. However after I did that, I stumbled upon this regularly maintained 7t port. Currently based on 7t open beta 16.
Going with this instead. Pixen is an amazing ROM, but I just prefer stock oxygen with root.
https://t.me/JaysUpdates
blaaaazedup said:
I did try those steps and everything worked perfectly. However after I did that, I stumbled upon this regularly maintained 7t port. Currently based on 7t open beta 16.
Going with this instead. Pixen is an amazing ROM, but I just prefer stock oxygen with root.
https://t.me/JaysUpdates
Click to expand...
Click to collapse
Let me know if notifications get fixed. I also prefer Stock Oxygen.... Just want to get my notifications. Let me know how it goes and I may give it a try.
blaaaazedup said:
I did try those steps and everything worked perfectly. However after I did that, I stumbled upon this regularly maintained 7t port. Currently based on 7t open beta 16.
Going with this instead. Pixen is an amazing ROM, but I just prefer stock oxygen with root.
https://t.me/JaysUpdates
Click to expand...
Click to collapse
I was going to give it a try and then he just posted that he was leaving to India and was not going to be providing anymore updates. All ROMs will be dead. He is not completely sure, but I still accessing the risk. Don't want to switch to a Rom that won't be updated.
Danny1976 said:
I was going to give it a try and then he just posted that he was leaving to India and was not going to be providing anymore updates. All ROMs will be dead. He is not completely sure, but I still accessing the risk. Don't want to switch to a Rom that won't be updated.
Click to expand...
Click to collapse
Give it a shot. I've been using it for the last 3 builds. From what I've seen in the 3 months I've used it, he says this often because people ask about 6t updates. There's usually only one when a 7t beta is released. Other than that there are none in between. But he has explained that his script he runs, builds all of his ROMs in less than a minute so he was going to continue updating.
Danny1976 said:
Let me know if notifications get fixed. I also prefer Stock Oxygen.... Just want to get my notifications. Let me know how it goes and I may give it a try.
Click to expand...
Click to collapse
About notifications, I couldn't figure out what you guys were talking about because I never had this problem. I had forgotten that I wasn't on stock 6t ROM.
So it's possible that this port doesn't have the issue because I get all notifications.
blaaaazedup said:
About notifications, I couldn't figure out what you guys were talking about because I never had this problem. I had forgotten that I wasn't on stock 6t ROM.
So it's possible that this port doesn't have the issue because I get all notifications.
Click to expand...
Click to collapse
Thanks for all the information. I will wait and see if he does keep updating it. He said he has too many things going and I think their may be a possibility he could stop. I am just going to see if he keeps supporting it.
Any bugs that you have notice with the Rom port?
Danny1976 said:
Thanks for all the information. I will wait and see if he does keep updating it. He said he has too many things going and I think their may be a possibility he could stop. I am just going to see if he keeps supporting it.
Any bugs that you have notice with the Rom port?
Click to expand...
Click to collapse
Not a single bug so far. In 3 months. The only thing is that you get the internal device error when you start up which is not an issue. And you get all the features of the 7t and 8Pro.
Danny1976 said:
Thanks for all the information. I will wait and see if he does keep updating it. He said he has too many things going and I think their may be a possibility he could stop. I am just going to see if he keeps supporting it.
Any bugs that you have notice with the Rom port?
Click to expand...
Click to collapse
How is pixen working out for you compared to stock
blaaaazedup said:
How is pixen working out for you compared to stock
Click to expand...
Click to collapse
PiXeN is really stable. Had only two strange thing happen. One was while I was on a call and could not access anything while on the call screen..... Basically I was stuck. It hasn't happened again. I also did notice the camera lag opening.... But not sure if it was due to the Rom being recently install.
Both issues have not been duplicated. The big benefit for me was, being able to use the OP Launcher and being able to transfer my launcher layout. Battery life is very close to stock and performance is very fluid.
From reading the OP 7T Port Beta 16 in Telegram.... There seems to be people having some issues with the ROM. Didn't read much, but it seems not to be as stable as PiXeN. For now will stick with PiXeN... Already getting use to swipping to the side gesture to go back.... I was used to swipping up at the bottom corner to go back. I did have to adjust the area where the side back gesture was, because some menus you side gesture to bring menu out. So I moved it to the lower side.
Danny1976 said:
PiXeN is really stable. Had only two strange thing happen. One was while I was on a call and could not access anything while on the call screen..... Basically I was stuck. It hasn't happened again. I also did notice the camera lag opening.... But not sure if it was due to the Rom being recently install.
Both issues have not been duplicated. The big benefit for me was being able to use the OP Launcher and being able to transfer my launcher layout. Battery life is very close to stock and performance is very fluid.
From reading the OP 7T Port Beta 16 in Telegram.... There seems to be people having some issues with the ROM. Didn't read much, but it seems not to be as stable as PiXeN. For will stick with PiXeN... Already getting use to swipping to the side gesture to go back.... I was used to swipping up at the bottom corner to go back. I did have to adjust the area where the side back gesture was, because some menus you side gesture to bring menu out. So I moved it to the lower side.
Click to expand...
Click to collapse
Well im going to try it out. I didn't really even set it up up so I didn't give it any real chance. But I'm going to flash it now and see. Just in case he does drop maintaining that port. I'll be ahead of the game. Lol.
Might be time for an upgrade.
blaaaazedup said:
Well im going to try it out. I didn't really even set it up up so I didn't give it any real chance. But I'm going to flash it now and see. Just in case he does drop maintaining that port. I'll be ahead of the game. Lol.
Might be time for an upgrade.
Click to expand...
Click to collapse
I know many users in the OnePlus 6T Telegram group are using PiXeN and have confirmed it to very good and stable. So far it has been true. Plus Gapps, TWRP are preinstalled. It also passes all the safetynet securities in magisk without having to install any magisk modules like I had to do when I rooted stock oos.
Danny1976 said:
I know many users in the OnePlus 6T Telegram group are using PiXeN and have confirmed it to very good and stable. So far it has been true. Plus Gapps, TWRP are preinstalled. It also passes all the safetynet securities in magisk without having to install any magisk modules like I had to do when I rooted stock oos.
Click to expand...
Click to collapse
Hmm, courious to know what modules were/are needed on a stock rom in order too pass safety net , was it something in order to pass a banking app ect...
As I am currently rooted (lastest version) , exposed installed for a few things, g-pay and banking apps working fine without and modules or scripts..all on a stock rom and kernel..
Can get 8 to 10 hrs. sot and make it through the day without a charge.. though I don't play games... Battery pic is a bit off as I had a lazy day and slept in yesterday ..