question about kernel - Galaxy Note 4 Q&A, Help & Troubleshooting

Hey guys I have n910c 6.01 rooted with two recovery. I want to ask if is there any way to install a custom kernel through another custom kernel. What I mean . I have a custom kernel that I don't want anymore and I don't want to reset my phone for a kernel... so I am asking if there is any way to do that. Thanks

Just reflash your zip rom without wiping data
Then flash any custom kernel you want

salah omer said:
Just reflash your zip rom without wiping data
Then flash any custom kernel you want
Click to expand...
Click to collapse
The problem is that the rom is stock. Not custom. So I can't flash the rom

Well . .
Method 1:
u need to do a backup first with ur custom recovery then flash the new kernel over the old one & see if things goes well or if u got troubles u can restore ur backup .
Method 2:
- u need to do a backup first with ur custom recovery.
- Then do a factory reset.
- In custom recovery go to restore & Restore everything except the system partition.
- after that u can flash ur new kernel.
PS: by custom recovery i mean TWRP .

salah omer said:
Well . .
Method 1:
u need to do a backup first with ur custom recovery then flash the new kernel over the old one & see if things goes well or if u got troubles u can restore ur backup .
Method 2:
- u need to do a backup first with ur custom recovery.
- Then do a factory reset.
- In custom recovery go to restore & Restore everything except the system partition.
- after that u can flash ur new kernel.
PS: by custom recovery i mean TWRP .
Click to expand...
Click to collapse
Done. I install the new kernel just trough the old... and it's ok.. thanks..

Related

heeelp

somone help me , i want to install new update of CM SCREAM by ling gan but when i install zip file and reboot devise , in bootloader nothing happend ,android startup dosent start , whats the problem . please help !!! :crying:
If you have backup, you can restore via recovery. If not, you have to reflash rom and don't forget wipe all before flash new rom.
dstar000 said:
If you have backup, you can restore via recovery. If not, you have to reflash rom and don't forget wipe all before flash new rom.
Click to expand...
Click to collapse
how can i reflash , from recovery ?
go to the right thread
milad.bmi said:
how can i reflash , from recovery ?
Click to expand...
Click to collapse
there is a whole thread about this rom .. check it you will find the answer
http://forum.xda-developers.com/showthread.php?t=1678409

[Q] Cant Install Hyperion

Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
9W2BOL said:
Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
Click to expand...
Click to collapse
Flash your phone to base DXLF1 and try installing Hyperion from there. if you still have trouble installing the ROM, try flashing DXLF1 then install EVO-X2.1 then Hyperion (that's what I did)
also you don't need a pre-rooted phone. installation of Hyperion automatically roots your phone. and if you did a fresh flash and haven't booted up your phone (after Odin flashing, immediately booted to Recovery then CWM Recovery) then you don't have to do a data reset or cache wipe, your phone after flashing stock rom is already as good as wiped and reset.
and you can flash Hyperion from either CWM or Stock Recovery. but the flashing of EVO-X2.1 requires CWM. I forgot if EVO needs root, but you can check that out on the developers page (too lazy to add link )
first flash stock dxlf
then if youre succesfull go to stock rom home screen
reboot recovery clear data factory reset and cache on stock recovery
then apply root update.zip (file you need to root ur phone)
next open cwm clear data and cache again
after that install hyperion then donot reboot and donot apply any update (must be later after succes install)
clear data and cache again in cwm
then reboot recovery clear data and cache again
then reboot wait for a while
thats my step and now im using hyperion smoothly
copied from my previous post
vangeodee said:
Flash your phone to base DXLF1 and try installing Hyperion from there. if you still have trouble installing the ROM, try flashing DXLF1 then install EVO-X2.1 then Hyperion (that's what I did)
also you don't need a pre-rooted phone. installation of Hyperion automatically roots your phone. and if you did a fresh flash and haven't booted up your phone (after Odin flashing, immediately booted to Recovery then CWM Recovery) then you don't have to do a data reset or cache wipe, your phone after flashing stock rom is already as good as wiped and reset.
and you can flash Hyperion from either CWM or Stock Recovery. but the flashing of EVO-X2.1 requires CWM. I forgot if EVO needs root, but you can check that out on the developers page (too lazy to add link )
Click to expand...
Click to collapse
Can you please give me a link for DLXF1, Can elaborate how to flash DXLF1 cause Im kinda lost there :laugh:
Before flashing DXLF1 do i need to clear my dalvik cache or after flashing ? Yeah I think most newbie like me get lost at the base thingy.. btw Just download my first custom ROM, The CoD! but I still like to install Hyperion because the home icon and the feature is awesome
9W2BOL said:
Can you please give me a link for DLXF1, Can elaborate how to flash DXLF1 cause Im kinda lost there :laugh:
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1465800
go dig in that thread, you should find it eventually. also you need to know how to use Odin flasher, but that's already included in the guide.
9W2BOL said:
Before flashing DXLF1 do i need to clear my dalvik cache or after flashing ? Yeah I think most newbie like me get lost at the base thingy.. btw Just download my first custom ROM, The CoD! but I still like to install Hyperion because the home icon and the feature is awesome
Click to expand...
Click to collapse
you may immediately flash to DXLF1. just go to download mode without doing anything. Like I said, flashing stock roms is as good as getting your phone right from the factory.
after flashing to DXLF1 you may retry flashing Hyperion. if that doesn't work, then refer to my previous post on what I did.
9W2BOL said:
Okay just rooted my phone yesterday, I have try all the ROMs from Jellyblast v3 to any ROM I can find on the developer page but my phone failed to install any of the ROM! So the thing is I love the Hyperion ROM but I cant install it on my newly rooted SGY, So do I need to root my phone again / Download Hyperion ROM again (Already tried three time) / Format my SD Card ? / Unroot then root again my phone? Hopefully someone can help me figure this thing
Click to expand...
Click to collapse
you should wipe data wipe cache wipe dalvik cache as it can cause bootloop then try to install it again and for flashing rom you do not need root access .
press thank if I helped you

Why in My GalY not work the JellyBlast CosROM ?

Hi ,, all
Do you can Help me ?
My GalY is not Work , Flashing the ROM Jelly Blast ?
I Following step by step the tutorial in the Page Official and all step the result is bootloop
step by step from me ?
- The First me Flash the Stock Rom from ODIN .
- after that I Flash The JellyBlast Rom via CWM
- i'm wait wait wait 10 minute and the result is BOOTLoop
please someone user can Help me ?
my Gal Y is BootLoop and I want Installed the JBRom .
Sorry for I Can't English
You need to do a full data wipe and cache wipe before flashing the rom. Please read the instructions carefully.
||I'm just a PM away for help||
I have tried over and over again ..
Sorry For English ..
NearLighting said:
I have tried over and over again ..
Sorry For English ..
Click to expand...
Click to collapse
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
samir basnet said:
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
Click to expand...
Click to collapse
FYI, rooting isn't necessarily required for flashing roms. All custom roms so far are pre-rooted.
||I'm just a PM away for help||
Did you clear data/cache from STOCK recovery AFTER flashing the rom? If not, do it and check if it works.
samir basnet said:
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
Click to expand...
Click to collapse
Use Root or Deodex ROM ? DEODEX include the Root .. ?
hitme987 said:
Did you clear data/cache from STOCK recovery AFTER flashing the rom? If not, do it and check if it works.
Click to expand...
Click to collapse
Stock Recovery ? why not CWM ?
Sorry Bad English .
try wipe data/reset, wipe cache partition, in advanced mode wipe dalvik cache, then flash jellyblast
Sent from my GT-S5360
After flashing stock rom u should root ur phone nd den flash any rom
U can install creeds 3.5 on ur phone without root
Its d only rom which u can install without root
Sent from my GT-S5360 using xda premium
No it nlot. I installed hype gm without root!!
Sent from my GT-S5360 using xda app-developers app
NearLighting said:
Use Root or Deodex ROM ? DEODEX include the Root .. ?
Stock Recovery ? why not CWM ?
Sorry Bad English .
Click to expand...
Click to collapse
Root your phone. If already rooted, proceed to the next step.
Make sure that you're on Stock kernel.
If your'e NOT on Stock kernel, either flash stock kernel, or open the JELLYBLASTV3.signed.zip on your pc, delete boot.img from it, and then flash the zip. In that way, you'll be able to use ANY kernel you already have.
Switch off your phone.
Go to Clockwork mode. This is important, because CWM is necessary, or you won't be able to boot up with the new Kernel.
Use the volume keys to move up and down.
Wipe data and cache
Now choose: Install zip from sd card.
Choose JELLYBLAST V3.signed.zip
Choose "yes"
It will be Installed. Now reboot your phone. First boot will take time. Be patient.
If you have followed EVERYTHING above carefully, you will soon boot up to your new rom.
Please wait until media scanning is completed.
Enjoy!!!

Flashing problem

Several days ago i try to flash (without success) Merruk kernel.After that incident (LOL) I was flashed stock rom nd start to flash JBv3.I followed the procedure step by step (that was my 3th time flashing JB),But i stucked in S.logo :silly:
After that i contact Percy215 nd bro is advised me to flash JB from stock recovery.And it worked! :silly:
Then i flashed White's kernel 1.2.0
So,my dear friends-what hapening with CWM recovery (CWM bla bla,....)whether the costume kernel modify stock recowery even after flashing a stock rom.
After all that i'v flashed again stock rom and then Repencis 3.5 in the same way-through Stock recowery.
And the question is: what to do next time (i'm gona try USSR v8) ??????:silly:
Whites an d other kernels like merruk,hells come witj their own cwm recoveries.
So if you want to boot into stock recovery you need to flash stock kernel or kernel like kuros which has stock recoveries and temporary cwms
Fawkes... said:
Whites an d other kernels like merruk,hells come witj their own cwm recoveries.
So if you want to boot into stock recovery you need to flash stock kernel or kernel like kuros which has stock recoveries and temporary cwms
Click to expand...
Click to collapse
Man, i was flashed those 2 roms (JB and Repencis) from Stock recovery which means that i was on stock rom before flashing those costume roms.I know that those kernels has their recoverys (permanent recoverys)
Totally weird situation !!
Where is the problem then?
For what you opened new thread?
When cwm is not working ' stock recovery should do the trick
Sent from my GT-S5360 using xda premium
Fawkes... said:
Where is the problem then?
For what you opened new thread?
Click to expand...
Click to collapse
I opened this treat because i cant use CWM (permanent or temporary) any more.
pustinjak said:
I opened this treat because i cant use CWM (permanent or temporary) any more.
Click to expand...
Click to collapse
OK wat happens when u flash cwm in stock recovery?
And please don't speak in baby language
(Unless u duno English properly. Then its OK u revert trying ur best)
pustinjak said:
Several days ago i try to flash (without success) Merruk kernel.After that incident (LOL) I was flashed stock rom nd start to flash JBv3.I followed the procedure step by step (that was my 3th time flashing JB),But i stucked in S.logo :silly:
After that i contact Percy215 nd bro is advised me to flash JB from stock recovery.And it worked! :silly:
Then i flashed White's kernel 1.2.0
So,my dear friends-what hapening with CWM recovery (CWM bla bla,....)whether the costume kernel modify stock recowery even after flashing a stock rom.
After all that i'v flashed again stock rom and then Repencis 3.5 in the same way-through Stock recowery.
And the question is: what to do next time (i'm gona try USSR v8) ??????:silly:
Click to expand...
Click to collapse
if you want to flash ussr8 .
just do the procedure of flashing that rom. the tut is posted on ussr thread
no matter youre using white kernel or any kernel which directly goes to cwm recovery.
if you want to flash ussr9. you have to go back to stock kernel first or those which has stock recovery first because that rom (ussr9) has no kernel and your previous will be the one to be used.
here is the best answer,,
if u r in USSR any verision,,people forget to reboot into recovery after installing the room-----this is important (in CWM go to advance reboot recovery then wipe data and cahe) then reboot,,
in hyperion stock recovery is the best to use,, i used this many time w/o single bootloop.
note:doesn't matter if u are in stock or custom rom
note: if u are using CWM always mount system and data
sanny5 said:
OK wat happens when u flash cwm in stock recovery?
And please don't speak in baby language
(Unless u duno English properly. Then its OK u revert trying ur best)
Click to expand...
Click to collapse
Man :laugh:,when i wrote that answer it was early morning in my city(3 am).
Btw,when i flash cwm i get cwm-nothing special,in cwm i can chose camands (wipe/advanced/mount/install,...).So i can use CWM but result is always same-samsung logo
p.s.
u wrote "wat" insted of what bro hehehe
kimerika said:
here is the best answer,,
if u r in USSR any verision,,people forget to reboot into recovery after installing the room-----this is important (in CWM go to advance reboot recovery then wipe data and cahe) then reboot,,
in hyperion stock recovery is the best to use,, i used this many time w/o single bootloop.
note:doesn't matter if u are in stock or custom rom
note: if u are using CWM always mount system and data
Click to expand...
Click to collapse
Today i was try to flash Repencis.I followed OP's instructions (wipe/mount/install/wipe,...)-still same thing hapends.Phone is at Samsung logo about 20 min.

Restore STock ROM using CWM

Hey i installed another rom on my sgy, now i would like to restore my original one, I have a backup of IT by cwm, plz give me step by step help to how to restore it using cwm
Go to recovery mode!!
Flash clockworkmode !!
Go to back up & restore !!
Go to restore!!
Chose ur back up time!!
All done!!
1hewar10rd said:
Go to recovery mode!!
Flash clockworkmode !!
Go to back up & restore !!
Go to restore!!
Chose ur back up time!!
All done!!
Click to expand...
Click to collapse
But don't i need to do other steps like mount data n wipe dalvik cache etc...
ApexPredator01 said:
But don't i need to do other steps like mount data n wipe dalvik cache etc...
Click to expand...
Click to collapse
No - your putting your phone back to the exact state it was in when backup was made - wiping things is not necessary and it auto mounts when restoring
marcussmith2626 said:
No - your putting your phone back to the exact state it was in when backup was made - wiping things is not necessary and it auto mounts when restoring
Click to expand...
Click to collapse
Are you Damn sure ?
ApexPredator01 said:
Are you Damn sure ?
Click to expand...
Click to collapse
With respect I know what I'm talking about - iv tested nearly every rom here for my statusbar thread - iv backed up & restored my phone too many times to count
Dude !! I always use advance recovery of only system because I always strucked in boot-loop while trying any new thing!!
OKay Thanks Alot Guys
Hey guys . Plz help i installed hyperion 8 n now when i open recovery it opens cwm directly and when i select restore . It says error loading boot image... Pls help :/
ApexPredator01 said:
Hey guys . Plz help i installed hyperion 8 n now when i open recovery it opens cwm directly and when i select restore . It says error loading boot image... Pls help :/
Click to expand...
Click to collapse
Coz the cwm is now your default recovery and yeah.. were you trying to restore cm7 backup? :what:
aniket.lamba said:
Coz the cwm is now your default recovery and yeah.. were you trying to restore cm7 backup? :what:
Click to expand...
Click to collapse
Yess !
I did exactly like these guys told me above :/
Oh dear - you do know to restore a cm7 backup you need to be on an ext4 partition and on percys kernel - if you flashed hyperion you will be savies kernel hence invalid boot image
flash percys kernel
reboot recovery
format system data cache flash (this changes system to ext4 for cm7 use)
advanced restore
restore system & data only
marcussmith2626 said:
Oh dear - you do know to restore a cm7 backup you need to be on an ext4 partition and on percys kernel - if you flashed hyperion you will be savies kernel hence invalid boot image
flash percys kernel
reboot recovery
format system data cache flash (this changes system to ext4 for cm7 use)
advanced restore
restore system & data only
Click to expand...
Click to collapse
How to do all that ?? :/
ApexPredator01 said:
How to do all that ?? :/
Click to expand...
Click to collapse
Well you should know - if you correctly flashed cm7 you would know how to flash percys kernel
If you flash roms you know how to format
and advanced recovery is in backup & restore in cwm
if you can't follow those instructions give up now and read the op of cm7 thread properly
marcussmith2626 said:
Well you should know - if you correctly flashed cm7 you would know how to flash percys kernel
If you flash roms you know how to format
and advanced recovery is in backup & restore in cwm
if you can't follow those instructions give up now and read the op of cm7 thread properly
Click to expand...
Click to collapse
Can you plz give me proper steps procedure with download links PLEASEE !
ApexPredator01 said:
Can you plz give me proper steps procedure with download links PLEASEE !
Click to expand...
Click to collapse
Really are you being serious!
Steps already given
To restore cm7 backup
flash percys kernel
reboot recovery
format system data cache
advanced restore
restore system and data only
what links can you possibly need - if you have already flashed cm7 before you know where percy kernel is because you need to be on percys kernel to flash the latest percys cm7 (hint it's on percy's cm7 thread!)
if you hadn't noticed I'm getting fed up of people who want spoon feeding
ApexPredator01 said:
I did exactly like these guys told me above :/
Click to expand...
Click to collapse
Dude!! We suggest u about how to restore STOCK ROM not cm7!!
Plz give ur full information what do u want??
U demand the process of restoring Stock Rom so we suggest that process !! :'(
1hewar10rd said:
Dude!! We suggest u about how to restore STOCK ROM not cm7!!
Plz give ur full information what do u want??
U demand the process of restoring Stock Rom so we suggest that process !! :'(
Click to expand...
Click to collapse
Yes man i want to restore stock Rom only !
And i thought by cm7 he meant clockworkmod not cyanogenmod
1hewar10rd said:
Dude!! We suggest u about how to restore STOCK ROM not cm7!!
Plz give ur full information what do u want??
U demand the process of restoring Stock Rom so we suggest that process !! :'(
Click to expand...
Click to collapse
Hey man. Im telling again i made a backup of my stock Rom using Clockworkmod . then i installed hyperion. now i want to go back to stock Rom using that backup. i followed steps you told earlier. it says Error loading boot image. Plz help now i!

Categories

Resources