somone help me , i want to install new update of CM SCREAM by ling gan but when i install zip file and reboot devise , in bootloader nothing happend ,android startup dosent start , whats the problem . please help !!! :crying:
If you have backup, you can restore via recovery. If not, you have to reflash rom and don't forget wipe all before flash new rom.
dstar000 said:
If you have backup, you can restore via recovery. If not, you have to reflash rom and don't forget wipe all before flash new rom.
Click to expand...
Click to collapse
how can i reflash , from recovery ?
go to the right thread
milad.bmi said:
how can i reflash , from recovery ?
Click to expand...
Click to collapse
there is a whole thread about this rom .. check it you will find the answer
http://forum.xda-developers.com/showthread.php?t=1678409
Related
Hi ,, all
Do you can Help me ?
My GalY is not Work , Flashing the ROM Jelly Blast ?
I Following step by step the tutorial in the Page Official and all step the result is bootloop
step by step from me ?
- The First me Flash the Stock Rom from ODIN .
- after that I Flash The JellyBlast Rom via CWM
- i'm wait wait wait 10 minute and the result is BOOTLoop
please someone user can Help me ?
my Gal Y is BootLoop and I want Installed the JBRom .
Sorry for I Can't English
You need to do a full data wipe and cache wipe before flashing the rom. Please read the instructions carefully.
||I'm just a PM away for help||
I have tried over and over again ..
Sorry For English ..
NearLighting said:
I have tried over and over again ..
Sorry For English ..
Click to expand...
Click to collapse
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
samir basnet said:
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
Click to expand...
Click to collapse
FYI, rooting isn't necessarily required for flashing roms. All custom roms so far are pre-rooted.
||I'm just a PM away for help||
Did you clear data/cache from STOCK recovery AFTER flashing the rom? If not, do it and check if it works.
samir basnet said:
First of all is your Y rooted?
if yes
In CWM mode u need to wipe your data as well as cache.Then install the rom.
If not
u need to root it first then follow above steps.
and if your phone is already rooted and still the rom doesnt install.than check if ur sd card has partitioning or not.if it has remove the partition and try.
Click to expand...
Click to collapse
Use Root or Deodex ROM ? DEODEX include the Root .. ?
hitme987 said:
Did you clear data/cache from STOCK recovery AFTER flashing the rom? If not, do it and check if it works.
Click to expand...
Click to collapse
Stock Recovery ? why not CWM ?
Sorry Bad English .
try wipe data/reset, wipe cache partition, in advanced mode wipe dalvik cache, then flash jellyblast
Sent from my GT-S5360
After flashing stock rom u should root ur phone nd den flash any rom
U can install creeds 3.5 on ur phone without root
Its d only rom which u can install without root
Sent from my GT-S5360 using xda premium
No it nlot. I installed hype gm without root!!
Sent from my GT-S5360 using xda app-developers app
NearLighting said:
Use Root or Deodex ROM ? DEODEX include the Root .. ?
Stock Recovery ? why not CWM ?
Sorry Bad English .
Click to expand...
Click to collapse
Root your phone. If already rooted, proceed to the next step.
Make sure that you're on Stock kernel.
If your'e NOT on Stock kernel, either flash stock kernel, or open the JELLYBLASTV3.signed.zip on your pc, delete boot.img from it, and then flash the zip. In that way, you'll be able to use ANY kernel you already have.
Switch off your phone.
Go to Clockwork mode. This is important, because CWM is necessary, or you won't be able to boot up with the new Kernel.
Use the volume keys to move up and down.
Wipe data and cache
Now choose: Install zip from sd card.
Choose JELLYBLAST V3.signed.zip
Choose "yes"
It will be Installed. Now reboot your phone. First boot will take time. Be patient.
If you have followed EVERYTHING above carefully, you will soon boot up to your new rom.
Please wait until media scanning is completed.
Enjoy!!!
Hey i installed another rom on my sgy, now i would like to restore my original one, I have a backup of IT by cwm, plz give me step by step help to how to restore it using cwm
Go to recovery mode!!
Flash clockworkmode !!
Go to back up & restore !!
Go to restore!!
Chose ur back up time!!
All done!!
1hewar10rd said:
Go to recovery mode!!
Flash clockworkmode !!
Go to back up & restore !!
Go to restore!!
Chose ur back up time!!
All done!!
Click to expand...
Click to collapse
But don't i need to do other steps like mount data n wipe dalvik cache etc...
ApexPredator01 said:
But don't i need to do other steps like mount data n wipe dalvik cache etc...
Click to expand...
Click to collapse
No - your putting your phone back to the exact state it was in when backup was made - wiping things is not necessary and it auto mounts when restoring
marcussmith2626 said:
No - your putting your phone back to the exact state it was in when backup was made - wiping things is not necessary and it auto mounts when restoring
Click to expand...
Click to collapse
Are you Damn sure ?
ApexPredator01 said:
Are you Damn sure ?
Click to expand...
Click to collapse
With respect I know what I'm talking about - iv tested nearly every rom here for my statusbar thread - iv backed up & restored my phone too many times to count
Dude !! I always use advance recovery of only system because I always strucked in boot-loop while trying any new thing!!
OKay Thanks Alot Guys
Hey guys . Plz help i installed hyperion 8 n now when i open recovery it opens cwm directly and when i select restore . It says error loading boot image... Pls help :/
ApexPredator01 said:
Hey guys . Plz help i installed hyperion 8 n now when i open recovery it opens cwm directly and when i select restore . It says error loading boot image... Pls help :/
Click to expand...
Click to collapse
Coz the cwm is now your default recovery and yeah.. were you trying to restore cm7 backup? :what:
aniket.lamba said:
Coz the cwm is now your default recovery and yeah.. were you trying to restore cm7 backup? :what:
Click to expand...
Click to collapse
Yess !
I did exactly like these guys told me above :/
Oh dear - you do know to restore a cm7 backup you need to be on an ext4 partition and on percys kernel - if you flashed hyperion you will be savies kernel hence invalid boot image
flash percys kernel
reboot recovery
format system data cache flash (this changes system to ext4 for cm7 use)
advanced restore
restore system & data only
marcussmith2626 said:
Oh dear - you do know to restore a cm7 backup you need to be on an ext4 partition and on percys kernel - if you flashed hyperion you will be savies kernel hence invalid boot image
flash percys kernel
reboot recovery
format system data cache flash (this changes system to ext4 for cm7 use)
advanced restore
restore system & data only
Click to expand...
Click to collapse
How to do all that ?? :/
ApexPredator01 said:
How to do all that ?? :/
Click to expand...
Click to collapse
Well you should know - if you correctly flashed cm7 you would know how to flash percys kernel
If you flash roms you know how to format
and advanced recovery is in backup & restore in cwm
if you can't follow those instructions give up now and read the op of cm7 thread properly
marcussmith2626 said:
Well you should know - if you correctly flashed cm7 you would know how to flash percys kernel
If you flash roms you know how to format
and advanced recovery is in backup & restore in cwm
if you can't follow those instructions give up now and read the op of cm7 thread properly
Click to expand...
Click to collapse
Can you plz give me proper steps procedure with download links PLEASEE !
ApexPredator01 said:
Can you plz give me proper steps procedure with download links PLEASEE !
Click to expand...
Click to collapse
Really are you being serious!
Steps already given
To restore cm7 backup
flash percys kernel
reboot recovery
format system data cache
advanced restore
restore system and data only
what links can you possibly need - if you have already flashed cm7 before you know where percy kernel is because you need to be on percys kernel to flash the latest percys cm7 (hint it's on percy's cm7 thread!)
if you hadn't noticed I'm getting fed up of people who want spoon feeding
ApexPredator01 said:
I did exactly like these guys told me above :/
Click to expand...
Click to collapse
Dude!! We suggest u about how to restore STOCK ROM not cm7!!
Plz give ur full information what do u want??
U demand the process of restoring Stock Rom so we suggest that process !! :'(
1hewar10rd said:
Dude!! We suggest u about how to restore STOCK ROM not cm7!!
Plz give ur full information what do u want??
U demand the process of restoring Stock Rom so we suggest that process !! :'(
Click to expand...
Click to collapse
Yes man i want to restore stock Rom only !
And i thought by cm7 he meant clockworkmod not cyanogenmod
1hewar10rd said:
Dude!! We suggest u about how to restore STOCK ROM not cm7!!
Plz give ur full information what do u want??
U demand the process of restoring Stock Rom so we suggest that process !! :'(
Click to expand...
Click to collapse
Hey man. Im telling again i made a backup of my stock Rom using Clockworkmod . then i installed hyperion. now i want to go back to stock Rom using that backup. i followed steps you told earlier. it says Error loading boot image. Plz help now i!
Im on cloudyg3 1.2 and i want something new and i saw other roms and they reccomend to use 2.8.11 while i use 2.7.0 should i update twrp and if yes how can i update it i really noob in these things
just download the zip file from here .. make sure its for your variant and flash via recovery :good:
http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
zekurosu said:
just download the zip file from here .. make sure its for your variant and flash via recovery :good:
http://forum.xda-developers.com/lg-g2/development/twrp-twrp-2-8-0-0-kernel-f2fs-tools-t2898705
Click to expand...
Click to collapse
Flash it like a rom? I mean wipe everything and flash it?
no wipe needed..
Just flash it, wipe nothing
zekurosu said:
no wipe needed..
Click to expand...
Click to collapse
Mennooo said:
Just flash it, wipe nothing
Click to expand...
Click to collapse
So I need to download it, and flash it using the TWRP I have now?Or through Flashify?
I just really bad at this, If some of you guys can help me somehow like be with me in the process it would be awesome
just flash it via your TWRP recovery
Hello every body
I have a Huawei ascend G700 and i tried to install TWRP recovery and I could install it on official rom. BUT after wipe dalvic cache, cache and etc... and reboot, my device stuck in boot logo page and I think it has been boot looped.
Now how can I fix it?!
Please help me :crying::crying::crying:
Well, you probably wiped /system.. I would suggest finding a custom ROM and flash that. You might be able to find stock images. I don't see why you erased your partitions though..
KawaiiAurora said:
Well, you probably wiped /system.. I would suggest finding a custom ROM and flash that. You might be able to find stock images. I don't see why you erased your partitions though..
Click to expand...
Click to collapse
That's because I'm newbie and I had no idea what to do!!! is there any way to back to official rom and official recovery? Unfortunately I have not provided any backup files. :crying::crying::crying::crying:
Please help me :crying:
PersianEngineer said:
That's because I'm newbie and I had no idea what to do!!! is there any way to back to official rom and official recovery? Unfortunately I have not provided any backup files. :crying::crying::crying::crying:
Please help me :crying:
Click to expand...
Click to collapse
http://firmwarefile.com/huawei-ascend-g700-u10
Try that
It's an Indian version but it might work with what you want! ^^ Remember, BACKUP before attempting anything.
KawaiiAurora said:
Try that
It's an Indian version but it might work with what you want! ^^ Remember, BACKUP before attempting anything.
Click to expand...
Click to collapse
Do you think, is it possible to install this rom via TWRP recovery?! I tried to install MiUI but after touch on Install button in TWRP recovery, its show me the first page of the recovery!!!:crying::crying::crying:
PersianEngineer said:
Do you think, is it possible to install this rom via TWRP recovery?! I tried to install MiUI but after touch on Install button in TWRP recovery, its show me the first page of the recovery!!!:crying::crying::crying:
Click to expand...
Click to collapse
I'm not sure.. You could try. You could also try using the bundled flashing program.
BOOT LOOP Huawei G700-U10
Hi,
If your problem is not still solved, you may please reply back. I will try to bring your G700-U10 back to stock rom with full functionality
PersianEngineer said:
Hello every body
I have a Huawei ascend G700 and i tried to install TWRP recovery and I could install it on official rom. BUT after wipe dalvic cache, cache and etc... and reboot, my device stuck in boot logo page and I think it has been boot looped.
Now how can I fix it?!
Please help me :crying::crying::crying:
Click to expand...
Click to collapse
Hey guys I have n910c 6.01 rooted with two recovery. I want to ask if is there any way to install a custom kernel through another custom kernel. What I mean . I have a custom kernel that I don't want anymore and I don't want to reset my phone for a kernel... so I am asking if there is any way to do that. Thanks
Just reflash your zip rom without wiping data
Then flash any custom kernel you want
salah omer said:
Just reflash your zip rom without wiping data
Then flash any custom kernel you want
Click to expand...
Click to collapse
The problem is that the rom is stock. Not custom. So I can't flash the rom
Well . .
Method 1:
u need to do a backup first with ur custom recovery then flash the new kernel over the old one & see if things goes well or if u got troubles u can restore ur backup .
Method 2:
- u need to do a backup first with ur custom recovery.
- Then do a factory reset.
- In custom recovery go to restore & Restore everything except the system partition.
- after that u can flash ur new kernel.
PS: by custom recovery i mean TWRP .
salah omer said:
Well . .
Method 1:
u need to do a backup first with ur custom recovery then flash the new kernel over the old one & see if things goes well or if u got troubles u can restore ur backup .
Method 2:
- u need to do a backup first with ur custom recovery.
- Then do a factory reset.
- In custom recovery go to restore & Restore everything except the system partition.
- after that u can flash ur new kernel.
PS: by custom recovery i mean TWRP .
Click to expand...
Click to collapse
Done. I install the new kernel just trough the old... and it's ok.. thanks..