Hi, I just found a DZ09 smart watch. The last owner have garbage this watch because battery door is missing and micro usb port is defective.
I can't plug with USB cable, this close the watch. I need to charge the battery with other kit.
But is not the actually problem. I try to reset to default the DZ09 watch. I go to setting, factory reset and a password is needed.
I have tried with; 1122, 0000, 1111, 2222, 3366, 1234, 12345, nothing work, and can't contact the old owner for password. I want to hard reset the watch and reset password. Only later, I make fix for battery door and micro usb plug to work (for charging only).
Anyone have idea to how reset password or find them without ADB ? I have tried Service Mode (*#3646633#), with no option for this problem.
Thank you in advance for your help.
Hello,
A few month ago I changed my watch dz09 password and now I forgot my password. What can I do to open my watch.
password of watch
Hi there did you find any trick to crack password of watch
1122
Model -ryx-nxy reset code
Did you try changing the firmware?
Related
Hi
I became the owner of unknown Elf. I know only this one was purchased on eBay then bricked by flashing incompatible firmware.
Today the Elf switching on and i can see the welcome screen only. When i connect the pda to my computer Activesync try to recognize, but can't obtain IP address (tried all the found Activesync IP address solutions, but no way). When i try to enter to bootloader (Camera + Reset) or make a hard reset (Red+Green+Reset) , i see the same welcome screen.
When the powersupply connected lights the blue led and Reg and Green buttons. When connected to the switched off, charging accumulator animation appears.
I tried to find JTAG contacts how read on pda2u forum, but no way too. No contacts in the place because the PCB is different (See atachments), but OMAP 850 onboard.
Anybody knows where can be JTAG pins on this board?
What i can do more to debrick?
You sure this was from a genuine HTC? Did you remove the stickers on the board?
Looks odd compared to the HTC Touchs I have....
Thank you for your reply, captainstu72.
I think, is not original, regarding Dopod site shortcuts in the firmware. But i obtained this PDA w/o any stickers, the glue only.
I reanimated this PDA by finding Hard reset combination (Green+Ok+Reset) but can't enter to the bootloader (not shortcuts [Camera+reset; ], nor EnterBootloader.exe does not works for this device)
As thats the case (the HTC shortcuts not working) I would suggest this is a clone.
You can trace the JTAG points yourself, it should just be a case of finding what pin out is what on the omap chip, and finding where it ends up. There should be a fair few bits on the internets about this, however, can take a bit of searching from my history with JTAG.
If you do it successfully, please bear in mind you will need to use the firmware for that phone, and the ELF firmware would not necessarily work.
I do find it odd you were given a phone with no stickers and not working. I'd say its stolen, as you have no way to check the IMEI now....
Hello Guys!.:crying:
today my galaxy s3's screen broke and has a password on it and all i need is my music that was download to it by me.
If anyone can help me with a program or a tip that i can remove my music from it without having to buy a new screen i will pay them 60$.
Paypal or whatever. If there is any program that can control your phone i will be happy.
Don't forget it has a password on it.
pss. I am not rooted.
:crying: :crying:
60$ Payments.
paypal or what ever.
my skype: Barca5Rocks
You will need other s3 device with the screen ok. Remove the back panel on both devices (few screws need to be removed), disconnect the display on the broken unit and connect the display of the new unit to the broken unit. This will allow you to log in and do what you need to do [backup, reset, etc.]
Couldn't you just connect to it via adb and pull any files you need from it?
Did you have a samsumg Account? If so, you can use it to unlock the screen so you can use the USB connection.
https://findmymobile.samsung.com
Sent from my SM-N9005 using Tapatalk 2
Connect it to your pc via USB cable and then you have the option to use your storage ( even with locked screen ) so you can pull out your music. It is simple as that.
Hi Guys,
As said above, my PC won't detect my DZ09 even if I've installed all the drivers I've found on the net. And yes my watch was off when connected to my PC.
I'm doing something wrong?
I want to do a backup of my firmware.
I need your help. Thank you in advance.
No one had the same problem?
I'm really eager to change the clockface, but I'm unable to make my PC connect to my watch.
Your help will be much appreciated.
Problem solved. I've always used the cable that came with the watch. Big mistake, just use your phone cable and it will work.
PS: Moderators, you can delete this post if it is useless.
I had a similar problem, Wanted to put files (Music) onto my smart watch yet the computer didn't detect the watch.
I overcame the problem by simply removing the memory card and putting it in a card reader ($4.00 NZ) from most electronic shops (I got mine at a discount 1,2,3 dollar shop!). I then put the memory card back into the watch. just watch the format as some of the songs I had to delete as the watch didn't recognise them.
when i leave my watch for charging it start charging but after some time it displays charging error what to do??
I bought a GT88 off of ebay, brand new. Is there anything i'm missing with this thing? Particularly...
Well, i'll jump right to it. In the menues there is an option for apps, and "uninstall all".
Are there apps i can get for this thing?
Will it work with a freedompop sim card?
What extra things can i do with this beyond the simple menu?
I put a sim card in it... and nothing happened. I can't find how to set APN settings...
i DID find that there's a repository of watch faces as vxp files that are pretty easy easy to install by just putting in the microSD via the cable
Wonder how to fix Gt88 Smartwatch Display
Good Morning.
I have a Gt88 Smartwatch and it said and stated it was IP57 Waterproof so i was showering with it i dont know if screw was a little loose but the Watch Powers on but the Display isn't turning on, its turning on their is audio but the display isn't picturing, I tried opening it up and seeing if their is a display adapter or display ribbon but their isn't. I cannot figure out how to get the display picturing again, i tried to update all the drivers via My M32Cd i7 model Computer i also tried removing the Bluetooth device from devices on windows 10 and reinstalling and setting it up but the display isn't working but that is how all the new smartwatches should be Manufactured compute and function ( through the Computer and computers ) .. can you perhaps send me a video of the procedure in which fix the display.
Thanks.
Akeem Ricardo Wade Ross.
How do I put a password on a gt88 smartwatch?
I am desperately seeking help......
I have just fitted a brand new Android 11 based head unit to my wife's car and I am having one issue in particular that is creating a lot of angst. My wife is not tech savvy and would simply like to jump in her car, start it up and have everything work inlcuding playing her favorite radio apps. I can have this work for her perfectly via Bluetooth Tethering when a toggle under ANDROID SETTINGS - CONNECTED DEVICES - PHONE - INTERNET ACCESS is switched on. However, this toggle reverts to off everytime the car is switched off and needs to be manually switched on eveyrtime to restore functionality. The unit supports wired Android Auto, but even then my wife does not want to pull the phone out of her bag everytime and plug/unplug. Is there any way the unit can remember the last setting or have it default to on? I have tried Macdroid app, but it does not offer this specific action. I have attached an image of the setting in question along with the specs of the head unit. Wifes phone is a Samsung Galaxy A52 runing Android 11. Help me save my marriage!
Albyzz said:
I am desperately seeking help......
I have just fitted a brand new Android 11 based head unit to my wife's car and I am having one issue in particular that is creating a lot of angst. My wife is not tech savvy and would simply like to jump in her car, start it up and have everything work inlcuding playing her favorite radio apps. I can have this work for her perfectly via Bluetooth Tethering when a toggle under ANDROID SETTINGS - CONNECTED DEVICES - PHONE - INTERNET ACCESS is switched on. However, this toggle reverts to off everytime the car is switched off and needs to be manually switched on eveyrtime to restore functionality. The unit supports wired Android Auto, but even then my wife does not want to pull the phone out of her bag everytime and plug/unplug. Is there any way the unit can remember the last setting or have it default to on? I have tried Macdroid app, but it does not offer this specific action. I have attached an image of the setting in question along with the specs of the head unit. Wifes phone is a Samsung Galaxy A52 runing Android 11. Help me save my marriage!
Click to expand...
Click to collapse
Hi, if unit has SD cards and USB drives in multimedia ports remove them first, then tweek settings again and then save settings (device will write in internal device memory) by shutting down device (remove key / shut down engine).
Repeat procedure if first time is not saved in internal memory (without SD cards or USB in ports).
After bootup again it will eventually write in internal memory and save settings.
Anton TNT said:
Hi, if unit has SD cards and USB drives in multimedia ports remove them first, then tweek settings again and then save settings (device will write in internal device memory) by shutting down device (remove key / shut down engine).
Repeat procedure if first time is not saved in internal memory (without SD cards or USB in ports).
After bootup again it will eventually write in internal memory and save settings.
Click to expand...
Click to collapse
Thanks for your reply, however there are no SD cards or USB drives. There does not also appear to be an option to 'save" settings.
It "saves" by it self when you turn device off (or remove key from contact). As for USB or cards, ok, you probably have master setings/factory settings in there that is entered with a pin code, do you know how to enter it ?
(thru infotainment)
We will go one step at a time.
Anton TNT said:
It "saves" by it self when you turn device off (or remove key from contact). As for USB or cards, ok, you probably have master setings/factory settings in there that is entered with a pin code, do you know how to enter it ?
(thru infotainment)
We will go one step at a time.
Click to expand...
Click to collapse
Thanks very much for your reply! When I toggle the switch to on, it does not retain that setting when I turn car off and remove the key. I do have the passcode to get into the factory settings of the HU, but I have had a good look and cannot identify any setting which relates to my issue, that's not to say it doesnt exist.
Take a picture of your device factory settings please, or maybe it's better to record a small video.
Anton TNT said:
Take a picture of your device factory settings please, or maybe it's better to record a small video.
Click to expand...
Click to collapse
Is this what you were after? Apologies if I misread your message.
Yes, let me see where can we find memory issues
Most likely it is in APP SETTINGS menu.
Play with settings untill you find correct setting, it will not harm device in any way, but prior to changing anything take a photo of each settings menu to avoid unpleasent changes that lead to app and config problems.