Hi Guys,
As said above, my PC won't detect my DZ09 even if I've installed all the drivers I've found on the net. And yes my watch was off when connected to my PC.
I'm doing something wrong?
I want to do a backup of my firmware.
I need your help. Thank you in advance.
No one had the same problem?
I'm really eager to change the clockface, but I'm unable to make my PC connect to my watch.
Your help will be much appreciated.
Problem solved. I've always used the cable that came with the watch. Big mistake, just use your phone cable and it will work.
PS: Moderators, you can delete this post if it is useless.
I had a similar problem, Wanted to put files (Music) onto my smart watch yet the computer didn't detect the watch.
I overcame the problem by simply removing the memory card and putting it in a card reader ($4.00 NZ) from most electronic shops (I got mine at a discount 1,2,3 dollar shop!). I then put the memory card back into the watch. just watch the format as some of the songs I had to delete as the watch didn't recognise them.
when i leave my watch for charging it start charging but after some time it displays charging error what to do??
Related
Hey guys.
I live in Australia, I have the Telstra-stock i9000T. Ended up rooting it and putting on the NZ "Telecom" version with HSDPA / NextG 850Mhz capabilities, because Telecome released 2.2 Froyo MUCH MUCH sooner than Tesltra bothered to do.
The phone has been running great ever since - and I only mentioned the above because before rooting it, i was able to watch 2GB-sized files of .mp4 videos without a hitch...now it seems i can't even TRANSFER them onto my device.
Whether i connect the USB and try and connect via 'mass storage' or 'kies' and copy/paste the video to my SD card (Sandisk 16GB SDHC, bought new), it just says it cannot copy. i USE Win7, if it gives me a timeframe to transfer (usually doesn't, so hard to tell if its working or not), it says 11-12 hours, which is insane, as at work, can take between 20-30 mins MAX to transfer a 2-3gb file. The audio file attache dis H264, or a common playback that IS normally compatable with this phone, so thats not the issue...
What its now doing, which it didn't before when i was able to transfer and play without a hitch - was it now asks to transfer and CONVERT to a playable format, or just transfer over knowing it may not work? No matter which option i select, it wont transfer over. I am still able to transfer smaller files, pictures, etc. Has anyone encountered this problem, or can suggest a way of fixing this?
PHONE DETAILS (after Telecom NZ flash)
Firmware: 2.2
Baseband: I9000TDOJP1
Kernel: 2.6.32.9
EDIT/UPDATE: Put the SDHC card into a USB reader, plugged into PC and transferred mp4 video files that way - the videos are recognised and play to perfection, so i am led to believe its an issue with Kies or the transferring of certain files to this phone when its turned on and in USB mode. The USB cable is the one that comes with my original package so i really dont know what the problem could be, i've only recently flashed a new copy of Win7 Ultimate 32 bit, so i doubt that comes into play... any thought?
RoOSTA
Anyone at all?
RoOSTA
This is happening to me, now I am unable to flash and my phone is messed up now.
I havent got to that point myself, probably should look into this next. I'm selling it shortly in favour of the SGS2.
RoOSTA
No one else?
I would dump/remove kies and then just install the latest/correct USB drivers, unless you have a real need for kies?
I would turn on USB debugging and connect to my PC that way. It's much simpler than trying to go via Kies (which I don't bother using any more).
psyren said:
I would turn on USB debugging and connect to my PC that way. It's much simpler than trying to go via Kies (which I don't bother using any more).
Click to expand...
Click to collapse
I might uninstall and reinstall the drivers, the problem still occurs whether i use Kies ir not, i prefer not to use the software either - its easier directly dealing the the files in question.
RoOSTA
What's up guys?
My problem is, that my PC stopped recognizing my htc after i plugged it into my TV to watch some movies stored on SD card
I have no idea how to fix this.. i started updating all Window's(7) drivers, but im just blind with solution.
Windows just keeps saying (after i plug HTC through usb to PC) that It cant recognize new Device -.-
Any solution?
(Sorry, i haven't tried [search] button cause it would took me ages on my phone now. Will try after i get on PC again.)
Thanks!!
*bump*
I don't think plugging your device into your TV had anything to do with this. It shouldn't affect the computer anyhow.
Have you done anything after you watched the movies?
Try a different port + a different cable.
Umm, i don't think so. USB cable is a bit damaged, but im not sure if within 2 hours it could has stopped working :| Gotta try to repair it tomorrow or something.
Also tried different port - no result.
I don't have any other cables that match my device.
It's probably the cable then. Because I am 99.9% sure that a TV can't make your computer not recognize your phone. Try a different cable and tell me what happens.
Thanks, will buy a normal one, and reply if that change anything.
Hello,
Long story short.
Concept of the phone is, plug into pc "tada" you can access the SD Card, and the External SD Card (64gb). Always worked on Xnote14, 15, and not 21.
I did a full clean wipe of phone, fully done the switchover to Xnote21, with data wipe reset everything to a literal.
Now to "xfer" files from pc back onto phone... I have to pull the micro sd, place it in a card reader and transfer... OR... dropbox... and i'm sitting in the same room with both.....
I have checked if this issue persists, where I can SEE THE PHONE IN DEVICE MANAGER, but NOT in my computer, folders, etc...
This issue persists on my pc AND laptop. Laptop = Windows 10 Tech Preview. PC = Windows 8.1 Pro. (Both 64bit).
Have tried reinstalling the following drivers. SAMSUNG_USB_Driver_for_Mobile_Phones.zip & Using Kies 2 or Kies 3 to "troubleshoot/reinstall driver". NO DICE. Even after rebooting several times.
Have tried to "uninstall and DELETE DRIVER" from device manager. NO CHANGE.
Am I missing anything OBVIOUS...
When phone connects, I naturally have on the phone, The usb pc connection tab thing, that lets me click camera PTP, Media Device MTP, or Media Device (USB 3.0). And NEITHER function for showing a "drive like object" to let me connect phone to pc and browse directory's that are accessible.... ie dcim......
I seriously feel like i'm missing a super expressive facepalm moment, and would love ANY help whatsoever... aside from smashing it...
- rmleloup
Bump... I actually need serious help with this, can ANYONE assist WHATSOEVER PLEASE
Another day, another beep beep goes the jeep... Anyone? Please! It's frustrating to just plug in the microSD into an external and wear it down every few days, while a single usb3.0 cable is much faster....
Another day again,
Seriously can anyone give me a hint on what to fix...
You may get help if you post to the roms forum.
To clarify...
This is the " Galaxy Note 3 Q&A, Help & Troubleshooting " right? I thought this was the area to place it... and if I bumped the rom's i'd get shunned by the moderators?
BUMP.
Still seeking help with this!
Mother of ALL BUMPS, Please someone help.
Hi everyone!
I've tried loads of stuff to try and find a solution to this problem, but couldn't find one so far.
Basically, I have what I believe is a u80 SmartWatch. It has a micro-USB port, in which the watch detects if it is connected to a socket charger or a PC.
When plugged into a PC, a notification on the watch tells me it's connected to USB, and gives me only one option: "COM Port". When I tap it, I get an error "Not allow or conflict". Obviously this watch wasn't made anywhere where English is the first language. I changed it to a couple of other languages, and tried again. This time, in other languages, the error changes to "USB: UART2 is busy".
The watch is not detected by any OS or computer that I've tried. It doesn't appear in device manager or USBDeview, therefore I cannot attempt to install drivers to get it functioning.
From what I've read, my watch could be a cheap clone or remake of a u8 or u80 smartwatch, but the developers would have had to get the watch OS on there somehow. I don't intend to flash it, as apparently that can damage clones. I am just trying to access the file system to play around with it and/or tweak some settings.
Does anyone have any idea what these errors mean or how to fix them?
Any help is appreciated.
Thanks!
Bump
Bump :3
Hi
What do you get if the watch is switched off before connecting.
Billythewizz said:
Hi
What do you get if the watch is switched off before connecting.
Click to expand...
Click to collapse
Nothing unfortunately, it just starts charging.
I bought a GT88 off of ebay, brand new. Is there anything i'm missing with this thing? Particularly...
Well, i'll jump right to it. In the menues there is an option for apps, and "uninstall all".
Are there apps i can get for this thing?
Will it work with a freedompop sim card?
What extra things can i do with this beyond the simple menu?
I put a sim card in it... and nothing happened. I can't find how to set APN settings...
i DID find that there's a repository of watch faces as vxp files that are pretty easy easy to install by just putting in the microSD via the cable
Wonder how to fix Gt88 Smartwatch Display
Good Morning.
I have a Gt88 Smartwatch and it said and stated it was IP57 Waterproof so i was showering with it i dont know if screw was a little loose but the Watch Powers on but the Display isn't turning on, its turning on their is audio but the display isn't picturing, I tried opening it up and seeing if their is a display adapter or display ribbon but their isn't. I cannot figure out how to get the display picturing again, i tried to update all the drivers via My M32Cd i7 model Computer i also tried removing the Bluetooth device from devices on windows 10 and reinstalling and setting it up but the display isn't working but that is how all the new smartwatches should be Manufactured compute and function ( through the Computer and computers ) .. can you perhaps send me a video of the procedure in which fix the display.
Thanks.
Akeem Ricardo Wade Ross.
How do I put a password on a gt88 smartwatch?