What's up guys?
My problem is, that my PC stopped recognizing my htc after i plugged it into my TV to watch some movies stored on SD card
I have no idea how to fix this.. i started updating all Window's(7) drivers, but im just blind with solution.
Windows just keeps saying (after i plug HTC through usb to PC) that It cant recognize new Device -.-
Any solution?
(Sorry, i haven't tried [search] button cause it would took me ages on my phone now. Will try after i get on PC again.)
Thanks!!
*bump*
I don't think plugging your device into your TV had anything to do with this. It shouldn't affect the computer anyhow.
Have you done anything after you watched the movies?
Try a different port + a different cable.
Umm, i don't think so. USB cable is a bit damaged, but im not sure if within 2 hours it could has stopped working :| Gotta try to repair it tomorrow or something.
Also tried different port - no result.
I don't have any other cables that match my device.
It's probably the cable then. Because I am 99.9% sure that a TV can't make your computer not recognize your phone. Try a different cable and tell me what happens.
Thanks, will buy a normal one, and reply if that change anything.
Related
Hi!
Ive got a big problem cause my Galaxy S just stopped being recognized by any PC. I dont know whats wrong, it just treats USB cable like it was a charger, PC doesnt detect anything neither does the phone. Its very strange since everything worked perfect for the last couple of weeks. I tried to connect it to a notebook i used to flash the phone a week ago and it has been turned off ever since so it cant be any driver related issue. Im afraid my micro-USB port is damaged but i have a custom firmware in it and since i cant reflash it the warranty isnt vaild ehh...
Any ideas?
THX
silly question...
Do you mount the phone via the status bar after you plug it in?
Thats the point - PC doesnt detect the phone AT ALL theres not even a sound that an USB device has been plugged in. The same thing in the phone it just starts charing it doesnt seem to know that its connnected to PC.
sounds like your PC mobo got the USB port fried.
try turning off the PC, unplug the power cord, wait for the energy to drain out, then turning it back on
my Windows 7 x64 some time does that, but it's not a hardware error
on yours it could either be a hardware dead, or the Windows gone Bezerk as usual
I tried different USB devices - other phones, pendrives and a printer and everything works fine except for the Galaxy S. The Samsungs USB cable also works fine with other phones..
I wrote to Samsung and they said to send them the device because its most probably damaged :\ Will they check the firmware version?
btw. as I said in the first post the phone doesnt work on my notebook as well
I wouldnt care so much about this because I can send files using ftp but I cant change the firmware without an USB port working (or am I wrong?)
I sometimes also have this problem. For me rebooting the phone and if it then doesn't work again using another USB port at my PC solves the problem.
Yesterday when the problem occurred for the first time I removed SIM and microSD cards and PC detected a device but it was recognized as 'unknown malfunctioning USB device' but no luck ever since.
Just to let you know my Samsung just fixed itself 0_o Might have something to do with the Windows reinstallation on my PC but it suddely works on my notebook as well. Im really confused now...
I hook up my Vibrant to my PC and nothing happens. The phone starts charging but I never get a prompt on my computer or sound notification that something has been mounted.
I go to my computer and see nothing of an external hardware source being plugged in.
I want to root my phone but I can't seem to get my Vibrant to show up on my computer. My MyTouch Slide had no problem. Suggestions?
I've already tried changing the USB drive settings...
I am not near my computer right now, so maybe someone more experienced can give you precise advice, but what I did for my PC (XP Pro) is download the Samsung USB Driver, install it, and only then the PC would recognize the phone.
Also, after your phone is recognized, you still have to mount it as an external drive from the phone itself before it can work.
See this is why I hate windows. I spent the last half hour trying to figure out what was wrong with this. In the end, simply plugging the USB into a different port fixed everything.
Have the same issue here. One port works and one does not recognize the Vibrant no matter what I try.
Sent from my SGH-T959 using XDA App
Arcadia310 said:
See this is why I hate windows. I spent the last half hour trying to figure out what was wrong with this. In the end, simply plugging the USB into a different port fixed everything.
Click to expand...
Click to collapse
That's not a windows problem, you have an iffy USB port
Also, now that you have fixed your issue, why not just download the update.zip file directly to your phone, no need to use your pc.
When I plug my phone into my usb port I keep getting an error message
That says
USB device not recognized
one of the usb devices attached to this computer has malfunctioned and windows does not recognize it. For assistance in solving this problem, click this message.
So when I do that it says unknown. I know I have the drivers installed because I can odin back to stock. I am thinking this is the reason why wired tether will not work.
Can anyone let me know what the problem may be?
Thanks.
This has happened to me from time to time. A reboot of the pc and phone has always fixed it.
I just realized I have never used this cable with the phone. I got it at walmart and it is made by fuse. So it could be the cable.
Also try a different usb port. Mine got error error messages on some ports but not the other on the same computer.
I bought several usb cables for cheap online. 1 totally stopped working, and another one disconnects the phone is I move the cable.
I always suspect the cable!
I am having the same problem with my laptop atm...
My computer can't seem to see the epic when it's in d/l mode. I've installed the samsung drivers as well...but no go.
Hopefully someone has a suggestion to fix the problem. I'll be seaching the forums in the meantime.
had the same problem try a different usb port aslo dont use usb multi hubs.
I have the same problems as well.
A reboot fixes nothing.
None of my ports work.
I do not want to replace my epic but this simple issue is nerve wrecking.
I have a similar problem. Both my wife and I have the epic. I have no issues connecting my phone to either of our computers but when I connect my wife's epic neither of the computer's see the phone at all (not even as an unrecognized device). The phone asks if I want to mount the sd card and I say yes and nothing happens. I've tried usb debugging and I can't get Odin to work either for hers (fine for mine). Has anyone else had this issue?
Thanks
I cannot get my epic to mount for ANYTHING! I factory wiped the phone, nope, I used a palm pre usb cable nope, I downloaded the official samsung drivers nope, I plugged the cable into the motherboard on the computer nope, I tried a different computer running windows 7, nope tried a laptop using windows vista, nope. Does anyone know ANY WAY POSSIBLE to get this thing to mount? I selected mass storage and dissabled and enabled usb debugging. Im just not having any luck. It seems that the computer recognizes the phone is connected just cant get to the files on the SD card.
I also spent many hours trying to figure out what the hell was wrong with my Epic, that is, why it would come up as a "malfunction" in Windows when I plugged the USB cable in.
I tried drivers, different restore points, wiping, etc. etc. etc.
To the point... Try a new USB cable. The one packaged with the Epic is junk. As a matter of fact, it worked several times before it crapped out. I have no idea why, but I picked up a new micro USB cable, plugged it in, and the phone was then immediately recognized by my computer to allow mass storage mount.
People who tried the Palm Pre USB cable also had issues for some reason.
IMO, there should be a sticky posted in this board regarding the packaged USB cable, as I encounter this issue quite a bit.
Ok I'll try to find a new one really quick thanks
ugh tried an HTC Mytouch 4g usb cable and that didnt work either. Gonna try a class 4 usb stick and im gonna try puttting all of the files on the computer from the SD card
Edit: Oh wow i cant put the files on the computer duh
Edit: Ok now I'm mad a Class 4 SD card wont connect to the computer thru the epic ughhhh
I'm guessing during this time, you've rebooted the computer a few times? Sometimes, that's all it takes...
Try uninstalling ALL of the USB drivers associated with the Epic, rebooting the computer, then connecting (with debug mode OFF). Windows found and installed the USB drivers for me in just a few seconds when I did this [with the new cable, the first time].
- G
Have u enabled development mode under settings > applications (in your) epic? If not, try that, then plug in cable.
Then pull down the notification bar and it'll give you back the option.. again, if you haven't tried this.
On occasion I have troubles with the Epic mounting/ejecting on a Mac, but the only time I've ever had an issue with it mounting on a PC a different cable solved the problem immediately.
Try a different USB port on your PC. If that doesn't work, try rebooting the PC and the phone.
I had luck with trying different usb ports though
I had this problem as well and:
1. Tried 4 different cables
2. Tried all 4 on all 4 different USB ports
3. Rebooted numerous times
4. Uninstalled/reinstalled drivers
5. Tried 3 different PCs (1 other running 7 and another running Vista)
6. Did 1-4 on all three computers.
OH! and the reason I was so adamant about finding a solution was that I was stuck in Clockwork... due to having messed up an EXT4/RFS/CW2.5/CW3.0 installation... It was MY fault... I screwed up.
The problem was I had been living with the nonmounting problem by simply putting my MicroSD into an adapter and plugging it into my Laptop for file transfers... never expecting to HAVE to ODIN at some time...
Anyway... I ended up coughing up the $100 to Insurance and replacing the phone.
HERE IS MY THEORY: I think what my problem was was that the USB port on the Phone was messed up. I think these USB ports are possibly a hardware fail point and the changing of cables has been a patch on the issue with the port... NOT the cables themselves!
I'm not suggesting that you are there yet since it sounds like you can at least still get the phone to boot up (and aren't stuck in CW) and could still use a work around of putting files on the MicroSD with an adapter...
But I would suggest you don't be as stupid as me and get yourself in a position where ODIN is your only hope.
Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...
OregonLAN said:
Yeah, it sounded like a bad USB port to me. Also, FYIY, if you ever have to replace the phone through insurance, tell them that the phone was lost. Either way, it will cost you $100.00 to get a replacement and when it's reported as lost, they will also send you a new battery...
Click to expand...
Click to collapse
You don't really think that I sent in a phone that was stuck in CW do you? I don't think that would have worked too well for me.....
Cheers!
Did you end up doing an ODIN restore
Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help
have you tried put yoy're phone in depurating mode?
I guess yo mean Debugging mode, as I couldn't found Depurating anywhere. Have selected it and the same effect
HI
I had the same problem after getting nowhere with it, for some reason and I don"t know why, I put it in download mode and then connected it to odin and my PC found it I then disconected it and its been fine eversince.
Jim
#Samsung Kies always makes problems on Windows x64 !
##I would recommend, if you got 32-Bit Computer, to use that ;-)
#If you Want just flash over Odin, then is this driver package enough
##[Link]--http://download2us.softpedia.com/dl/85b009d47a0940e89eee2297a531d100/4f577870/300141878/drivers/mobile/SAMSUNG_USB_Driver_for_Mobile_Phones_1.4.8.0.exe
#The Package is also enough for If you want just to connect to mass Storage (Phone's SD Card)
Don't Forget to Thanks, if it was useful for you!
_______________________________________________
Hi there.
By direct connection you mean the USB Mass Storage mode, right?
It might be some weird, random problem with the samsung system drivers. I used to have such problems about two years ago, back in the days of Froyo. Have you tried re-installing them? There was a link to proper drivers file in one ICS installation tutorial, and those drivers can be downloaded here. If you go about trying this method, lemme know if it worked.
Cheers.
PS: Unlike diklooc there suggested, do not never EVER go back to x86 OS. That's the worst advice. Kapisch?
Did you check your usb port in System ?
Sometimes it stuck with another lastest device
Hi,
have tried everything, and finally only in a WinXP32 could be abble to get the error shown on the file atached.
But nothing (warnings) come up in Device Manager
Unninstalled everything (kies) and tried to install only the driver and nothing happens.
Should I try to mount it on a linux?
or is it dead?
thanks
i have this problem too
wat chan I do???
my sgs can not connect to my PC
This may help...
Hi there - I don't have the same phone as you, but I did encounter the exact same problem. I've been searching around and it looks like the most common fix was to simply replace the cable. I don't know what kind of cable you have, but my phone (a Samsung Focus i917) uses a mini-usb connector. I found that my Amazon Kindle used the same connector.
When I was using the Samsung cable, I'd get intermittent connects and charge power. The OS would report unknown device. When I switched computer's = same result. I switched to my Kindle cable and the computer instantly recognized the device and installed the drivers. After 12 hours of troubleshooting, factory resetting my phone (blah - lost everything) it turned out to be the cable. I know that this isn't an easy troubleshooting step for most people, because who has an extra cable? I just got lucky that my Kindle uses the same connector. I'm now suspecting (due to the prevalence of this connectivity problem coming from people with Samsung phones - there are a LOT of reported issues) that there is probably a Samsung cable problem in general.
Good luck with your phone.
try
try select mass strong ...
Tips and unlock advice.
nasdriver said:
Hi,
I'm having a real though time trying to connect my galaxy s1 to a pc. Have tried everything, like kies, direct connection, reseted the device, and no joy.
When I plug the cable it makes that sound as it is connecting but it doesn't show in the PC anywhere, nor even in Device manager.
It can get pwr from the usb cable when is connected; already tried with another cable and same thing.
My final goal is to unlock it.
thanks for any help
Click to expand...
Click to collapse
Nasdriver, I currently have a similar problem but mine is related with Samsung Kies as I can't get either my older SGS1 or my newer Samsung Nexus to get recognized by Kies. I also suspected the cable thing and even read it could be a USB port issue but neither of them was my problem (I have 3 cables and 8 ports on 2 computers that result in the same thing). I can connect other devices with the same cables and they work, so I suspect my problem is focused around the Samsung device drivers.
My advice is if you can go in a systematic manner, first focus on the cable (easiest to replace), if you get the same results with a new cable, then focus on the USB physical port, clean it with some Isopropyl alcohol, if the port works for other devices (camera, other phones, etc..) on the same cable but not with the SGS, then try reinstalling the samsung device drivers.
Oh, and if you want to unlock your phone, the EASY way is to download the Galaxy S Unlock application from the Android market (no affiliation) it's free (but the developer does accept donations) and it WORKS. I won't bore you with my 3 week journey trying to unlock my Bell SGS phone here in Canada, had I found this app first I would have done it in less then 2 min saved myself a LOT of frustration.
Good luck