hello
i have a 2020 and i can't get a connection with a network, so i upgraded to wm5 and still i got this problem maybay i know what the problem is
you all know the backside with the gold coloured antenne (where you can plug a antenne) is broken.
should i sold it good again
maybay you think i am stupid so you don't repley, but i am 14 years old.
and one thing: is it possible that the software causes this problem
I upgrade to to wm5 and my phone say "No Service" too. I upgrade the radio version from 1.10 to 1.19 but continue with "No Service"
but your plug on the backside, is it there or is it also broken off, if not i am glad that the software is the problem
I had the same problem
Hi Guys,
I had the same problem several days ago. Searched this forum, found many have the same problem, posted my question and no reply as others.
Now how did I fixed the problem:
Did a hard reset
Press ResetButton and hold down CameraButton + RecordButton.
Hold them pressed until the "Boot Options" menu appears on the screen.
Select the options as follows:
(for selecting use RecordButton, change values with CameraButton)
Enable KITL -> NO
Clean Registry Hive -> YES
Format Storage -> YES
When done, press DPad and wait until OS starts.
I am not sure if this would work for you. But it certainly did fix my "No Service" problem
Thanks
Nazer
no it didn't work for me,
But thanks for your idea
should i try different radio stacks???
EDIT; i tryed them but no service, ****!!!!!!!!
it can be the band how to change the band??
if external antenna connector is missing then no network.
when external antena is connected internal antenna is disconnected,that connector do this inside.
if you can put some photo of that area of pcb maybe can help you.
gabiz_ro said:
if external antenna connector is missing then no network.
when external antena is connected internal antenna is disconnected,that connector do this inside.
if you can put some photo of that area of pcb maybe can help you.
Click to expand...
Click to collapse
same problem 4 me
the the easyest solution i stab/put a pin into external hole ( inner side + )
yeah its works meanwhile i think for a better homemade external antenna
did anyone had a brilliant ideas ???
I just bought used Hima through, because I broke LCD screen on mine. And I got it with some old German ROM on it, it's working fine, but I would like something newer and in English. The thing is, that when I put phone in USB craddle, it only charges the device and says that USB Device Not Recognized. I cannot upgrade ROM nor anything else, just charge it. On my previous broken Hima, I had no such problem... Does anyone has clue what is wrong and what is the solution?
Thank you in advance...
I just found out that when I want to sync, I can do it, but have to pull cell phone toward me while it's in craddle. But doesn't work when I want to flash ROM. So I guess it's pins problem. I looked them and don't see anything bad, anyone has clue what to do?
OK, I finally managed to install ROM, I had to stick something to push forward my Hima in cradle. Does anyone know what can I do to fix that problem? It's the pins connection problem...
first of all..i don't understand why you started a new topic on this problem because THERE IS ANOTHER TOPIC WITH THIS PROBLEM JUST 3 LINES DOWN AFTER YOUR TOPIC...if you had read but didn't......about the conectivity problem with the pins cradle usb cable and advanced functionality of the usb-pc function..and thath it works just for the charge and for standard conectivity is says device mailfunction...
Because I had german windows 2003 that had no advanced functionality of the usb-pc connection! And also I didn't see too many similarities with those posts which aren't three lines down after my topic.
I changed 2 craddles and also had same problems. But I managed to access PPC when I gave some pressure on cell phone while in cradle...
I have another broken Hima (LCD screen broken), and wondered if I could take his connector?!
Hello everyone, I have a couple of questions to ask all of you great phone gurus
**If this is the wrong forum for this sort of thread, I apologize in advance**
Basically I have ruined the USB connection on my Touch Cruise. I am wanting to know if there is any way I can access my files on the phone by having it connected to my wireless network at home (ie a program or something I can run on my PC.) Reason I ask is I am trying to edit the HTC weather Plugin to show my location (Lebanon, OH, USA) and it is quite hard/impossible to do using the phone alone.
Second question is, is it possible to replace a damaged USB connector? I know it is probably ruined but I figure it might be worth a try. I had attempted to hook up my front USB header on my motherboard, but plugged them in backwards. I managed to salvage the phone by removing the actual USB piece from the phone and pulling the wires out. Luckily I am still able to use the phone (nothing else besides the USB connector is messed up) by purchasing an external battery charger + battery.
I know these are probably both a shot in the dark but any help anyone could provide would be GREATLY appreciated.
You can sync via bluetooth if you have it on your computer, or wifi search in google for that (ex: http://wifi.aximsite.com/sync.html)
I tought replace it will be very hard .
just out of curiosity could you please give us some screenshots as i'm having a real hard time understanding what you did and how it looks now? ^^
using bluetooth will help and maybe a card reader + microSD might speed things up. find a good file manager for WinMO
i doubt that there is any way to acces phones files through wireles so bluetooth is the only wireless (and supported) way
I don't have a camera currently but just look at your USB connection on your phone then imagine that there is absolutely nothing in it. It is just an empty 'rectangle'. No wires or the little horizontal piece that normally sits in there. Just an empty 'rectangle.'
Thanks for the replies. I am trying the wireless sync now.
Thanks a bunch
Flashed LEOIMG.nbh from RUU_Leo_HTC_WWE_1.43.405.1_Radio_Signed_15.26.50.07U_2.04.50_22_2_Ship trying to unbrick my HTC HD2
Now when I turn it on, I get no screen, no bootloader, etc.
USB does work, appears as "Qualcomm CDMA Technologies MSM"
I found some drivers and installed it as "Qualcomm Diagnostics Interface 3197"
I have an idea to fix this..
I extracted the SPL.nb from T-Mobile_HD2_MR_Software_2.13.531.1
if I or someone can find the right Application to flash the HD2 via the "Interface 3197"
Maybe a variation of QDLTool (The HD2 shows up as ready to flash but the images are for the Streak)
Any help is very much appreciated..
I have two HD2's, one functional and one not, ready to work hand and hand with someone via IM (Ex: GTalk or AIM) to find a solution to this problem!
Does anyone have any ideas? Please help.. Don't want a $500 paper weight
brandonsisco said:
Does anyone have any ideas? Please help.. Don't want a $500 paper weight
Click to expand...
Click to collapse
Sorry man but the only way to reserect a bricked HD2 is by using a JTAG and a RIFF BOX. Do a little scimming over the thread titles in this forum. You will find plenty of threads that descuss this and some of them have post by members that offer to fix a bricked HD2 as they have the JTAG and RIFF BOX. You can also check and see ic there is a cell pbone repair shop in your area, they are more and more of these poppieg up now, heck there is one in my area now. Either finding a member here or a repair shop is probably going to be your best option cause it is going to cost you well over $200 USD to get the JTAV and RIFF BOX. A member here or repair shop will only charge you a small fraction off that price. Also the procedure you have to do to reserect your HD2 recuires you to partially desassemble your pbone and this is not for just anybody.
I read your post yesterday .utility was hesatant in posting as I wanted to see if someone might had another idea to put with yours and the both of you come up with a way to do what is said to be impssible. Wich is reserecting a bricked HD2 by just using the mini USB port to run the needed software on it to be able to reinstall a ROM. But it seems that no one has any ideas to put with yours sorry man.
I have looked through the forum and I found other guys trying to fix it without disassembling.. If I have access to the qualcomm chip and it appears in qdltool, why can't we just reprogram it via usb?
brandonsisco said:
I have looked through the forum and I found other guys trying to fix it without disassembling.. If I have access to the qualcomm chip and it appears in qdltool, why can't we just reprogram it via usb?
Click to expand...
Click to collapse
To be completely honest with you I really don't know the technical answer to your question as I have hardly any knowledge of the inner workings of the HD2 hardware. But from what I can best come up with is when a HD2 gets bricked it does something to prevent comunication between the CPU (Qualcomm Snapdragon processor) and the NAND chip that holds the ROM software. Wich intern means that you can not gain access to the NAND chip via the USB to run whatever needed software to restore it. This is why the JTAG is needed as it can reastablish comunication between the CPU and the NAND chip. Now this is just a thought of mine and I have no data to back this up with. So I maybe way off base as to why you can not use the micro USB port to reserect a bricked HD2, like I said it is just a thought I have and nothing more.
You flashed a 51 radio to a tmous. If you manage to fix it without repair or jtag, you would be the first.
Hello,
My MK888 box worked smoothly only for two days. On third day I noticed that device is turned off. It can't boot up now. The PowerLED lights up for 5 seconds and it goes off. The video of this process You can see here: http://www.mediafire.com/watch/gcg1a43k9qceoem/CAM00200_compressed.mp4
Connecting OTG cable causes permanent glow PowerLED, until disconnected. I checked dmesg and it doesn't change when I connect device with OTG cable. Windows doesn't see it either. Connecting it with Recovery button pressed down doesn't help. It has stock rom without any modififcations. Only XBMC installed and some other apps.
Does anyone has any idea how to fix this?
I bought it here: http://www.aliexpress.com/item/TV-B...3188-2GB-RAM-8GB-ROM-CS918-AV/1392309954.html
The seller gave me link to some new firmware and no other info. Only "please download the firmware and install in your computer, and then connect the tv box to the computer, it will flash automatically ".
7ymekk said:
Hello,
My MK888 box worked smoothly only for two days. On third day I noticed that device is turned off. It can't boot up now. The PowerLED lights up for 5 seconds and it goes off. The video of this process You can see here: http://www.mediafire.com/watch/gcg1a43k9qceoem/CAM00200_compressed.mp4
Connecting OTG cable causes permanent glow PowerLED, until disconnected. I checked dmesg and it doesn't change when I connect device with OTG cable. Windows doesn't see it either. Connecting it with Recovery button pressed down doesn't help. It has stock rom without any modififcations. Only XBMC installed and some other apps.
Does anyone has any idea how to fix this?
I bought it here: http://www.aliexpress.com/item/TV-B...3188-2GB-RAM-8GB-ROM-CS918-AV/1392309954.html
The seller gave me link to some new firmware and no other info. Only "please download the firmware and install in your computer, and then connect the tv box to the computer, it will flash automatically ".
Click to expand...
Click to collapse
Follow his advice, re-install Stock Rom
Hammer_drum said:
Follow his advice, re-install Stock Rom
Click to expand...
Click to collapse
Read my post again. Especially these two sentenses:
I checked dmesg and it doesn't change when I connect device with OTG cable. Windows doesn't see it either.
Click to expand...
Click to collapse
"RK3188 (Quad-Core) Firmware Image Flashing: English RKbatch Tool v1.6" from http://www.rockchipfirmware.com/firmware-downloads doesn't see my device.
7ymekk said:
Read my post again. Especially these two sentenses:
"RK3188 (Quad-Core) Firmware Image Flashing: English RKbatch Tool v1.6" from http://www.rockchipfirmware.com/firmware-downloads doesn't see my device.
Click to expand...
Click to collapse
Are you holding the reset button on the device when connecting to the PC?
Hammer_drum said:
Are you holding the reset button on the device when connecting to the PC?
Click to expand...
Click to collapse
from the first post...
Connecting it with Recovery button pressed down doesn't help.
Click to expand...
Click to collapse
7ymekk said:
from the first post...
Click to expand...
Click to collapse
Sounds like a hardware fault in all honesty.
Mine turns itself off immediately sometimes but not on a consistent basis.
I would tell the seller of the issues about it not detecting, I'd make sure your drivers are up to date though.
The drivers are not an issue as the dmesg (linux tool) shows nothing, like no device is connected. It should show something. I thought that there is some hack for this or possibility to connect with JTAG or something. I will send it back to the seller.
7ymekk said:
The drivers are not an issue as the dmesg (linux tool) shows nothing, like no device is connected. It should show something. I thought that there is some hack for this or possibility to connect with JTAG or something. I will send it back to the seller.
Click to expand...
Click to collapse
HELLO,
i have exactly the SAME problem as you described with my tv box (i think it is T-R42 because it has bluetooth)
Also i have the stock rom , and also i bought the tv box from an aliexpress seller
Normally i keep it in operation (was about a week i didn't turn off it)
yesterday morning i found it powered off,
and when i try to power on it pressing the button,
the button light stays on for a few seconds, then it (and the device) turns off
Yesterday night i connected the tv box to my pc via otg cable.
When connected to the pc via otg, the light stays on.
Connecting the usb cable to the pc, and pushing the reset button under the tv box, my pc detects rk31sdk device, then asks to install drivers for it
Choosing automatic search of drivers, my pc find drivers for 'MDB device' and istall them... and the process ends correctly
But after a few seconds, windows finds another time the 'new hardware', and asks to install drivers... and so on
(I dont know if in this phase i did some wrong action, this evening i will try to find and install the right drivers...)
Then i downloaded the software for my tv box, including the Rockchip updater (RKAndroidTool.exe) and latest custom rom from wasser (forum freaktab.com) :
http://www.freak-tab.de/wasser/firmware-wasser-1.2.4.zip
Then i lauched the RKAndroidTool:
the first time it didn't find the device, so i tried to disconnect the tv box, reconnect it and press the reset button under the tv box
In that way, the RKAndroidTool detected the device.
I Clicked Erase IDB, and seems it worked find, endings OK
Then i selected all the software : Loader, Parameter, Misc, Kernel, Boot, Recovery, System and clicked 'RUN'
The process started, i saw:
Testing device: OK
Flashing Ram... OK
So i was happy, i thought i solved my problem...
instead i solved nothing, the device still had the same behaviour as before (the same as you described)
So i repeated the process, selecting only one update at a time, (only the Boot , only the Recovery, only the System etc)
The process seems always to work ok, because it ends with OK
But the tv box didn't change behaviour, the same problem remain
I noticed that sometimes during the update process the message 'Found RKAndroid Loader Rock USB' changed to 'NOT FOUND',
so i had to retry pushing the reset button to make it be found
I dont know how RKTool works, i have the suspect that messages tells OK also if it do nothing ...
this evening i will retry, installing the right drivers...
You are a lucky guy. Mine wasn't even detected by my PC. After maaany approaches of powerON+RecoveryButton dmesg showed the new device only once with following issue: "BOS descriptor failed.". The seller told me to send it back for replace, but they will cover only one posting cost. It cost me extra $16
7ymekk said:
You are a lucky guy. Mine wasn't even detected by my PC. After maaany approaches of powerON+RecoveryButton dmesg showed the new device only once with following issue: "BOS descriptor failed.". The seller told me to send it back for replace, but they will cover only one posting cost. It cost me extra $16
Click to expand...
Click to collapse
Hello,
i have still to test it,
but perhaps i got the solution for the problem:
a user from freaktab forum suggested me that the problem should be the power adapter:
he suggested me to buy a power adapter 5V , with 2A output minimum
I dont have such power adapter, if you have it, and you have not sent yet the tv box to the supplier, please check this solution and let me know!
Thanks
I saw this solution somewhere in the internet, but unfortunately I checked it with 2.5A adapter...it didn't help. I tested the standard adapter with multimeter and everything appeared to be fine. I already sent my device to the seller. I hope he will replace it.
7ymekk said:
I saw this solution somewhere in the internet, but unfortunately I checked it with 2.5A adapter...it didn't help. I tested the standard adapter with multimeter and everything appeared to be fine. I already sent my device to the seller. I hope he will replace it.
Click to expand...
Click to collapse
i found this thread on freaktab
http://www.freaktab.com/showthread....few-seconds-then-shuts-down-Bad-power-adapter
i will check if this solution will work with my tv box
In the case it doesn't work i think i will have also to send the tv box to the aliexpress seller...
but i dont know how to do it, and how much i have to pay
did you choose DHL shipment, or which other carrier?
I bought my t-r42 on october, now are passed 4 months... i dont know if i still can ask to the seller to replace it...
any suggestion?
Thanks!
I asked him through aliexpress:
Sign In -> My orders -> CHOOSE_YOUR_ORDER -> View Detail
at the bottom of this page I have some sort of chat feature.
DHL is out of the question! They take 20-40$. I sent it with Polish Post.
7ymekk said:
I asked him through aliexpress:
Sign In -> My orders -> CHOOSE_YOUR_ORDER -> View Detail
at the bottom of this page I have some sort of chat feature.
DHL is out of the question! They take 20-40$. I sent it with Polish Post.
Click to expand...
Click to collapse
Ok thank you,
if the power adapter solution doesn't work i will try to contact the seller
To be honest, i am not very satisfied of this tv box, it didn't work very well
for example i used skype (connecting it to a logitech c270 webcam), and it didnt work well... very often skype crashed, and camera app also had problems...
Perhaps i will ask to the seller if i can buy another model and can get some discount returning my tv box to him...
quad core android tv box Q7
I trie to make update the fimware after 1minute re line and write fails,
i try again an the recovery an the device is not work..
help me please.
Same problem
Did anyone could fix this? I have the same problem, any firmware, even the supposed stock one, fix the problem, the device doesn't boot.
I don't know what happens, it can update the firmware every time I want....
RKbatchtool is better than RKAndroidtool.
connect the box to the PC via OTG but do not connect the power. hold the recovery button and then connect the power cable.
if this still fails then try Maskmode. bit more complex and i would recommend a good read over at freaktab.com first. have to open the box up and short the 8th and 9th Pin on the NAND chip.
similar to this http://www.freaktab.com/showthread.php?1943-NEW-Unbrick-or-fix-NAND-on-the-MK808
and those with a Q7 box. dont use Wassers rom. it will load but bluetooth, wifi and ethernet wont work on it
Freaktab has roms for the q7
I had the same problem, I even brought device to my friend who work in repair shop and he don`t find any technical damage. Then one evening i was watching movie and all the time trying to connect it to pc and reset, and etc. then suddenly blue light start glowing and since then it is working very well, but my pc still dont recognize it
good price for cs918 tv box
Hi dear friend
Pls help to forward the message to the procurement officer.Thanks
^_^
CS918 TV BOX 1G $29 CS918 TV BOX 2G $32
We get your email address and know that you are interest in the tv box.
We would like to introduce our company and products, hope that we may build business cooperation in the future.
We are factory specializing in the manufacture and export of tv box for more than three years.;like hot sales MINIX \ MXQ \MXIII\ CS918 \ M8 \ M8S \ Arabic iptv box .and so on ...
Expressly, our price is very competitive because we are manufactory,
We also can put yourself logo on the tv box,And according to your request to add some design
As a very active manufactures, we often develop new designs , If you have interest in it, it's my pleasure to offer news to you regular.
Best regards
umtron.jack
Skype : um-jack
kik:jack um
CS918S Start up problem
I had same start up problem with my new CS918S TV Box.
contacted Seller and she gave me link to some new firmware and no other info. Only "please download the firmware and install in your computer, and then connect the tv box to the computer, it will flash automatically ".
I downloaded all the upgrade software as mentioned but still not working.
I went to my friend's home who is also using the same TV Box. Tested my TV Box with my friend's HDMI Cable, Power Adapter one by one. Finally, finding out when using my Power Adapter for the 2 TV Boxes they had the same startup problem. But using my friend's power adapter, both are working . Communicated with seller shop: China SmartView Digital Co. Ltd. Aliexpress Store no: 808900. She asked me to mail back to the manufacture direct but she doesn't be responsible for any cost.
I order a new power adapter cable from other supplier at my own cost.