CS918/MK888/K-R42 Startup/boot problem - Android Stick & Console RockChip based Computers

Hello,
My MK888 box worked smoothly only for two days. On third day I noticed that device is turned off. It can't boot up now. The PowerLED lights up for 5 seconds and it goes off. The video of this process You can see here: http://www.mediafire.com/watch/gcg1a43k9qceoem/CAM00200_compressed.mp4
Connecting OTG cable causes permanent glow PowerLED, until disconnected. I checked dmesg and it doesn't change when I connect device with OTG cable. Windows doesn't see it either. Connecting it with Recovery button pressed down doesn't help. It has stock rom without any modififcations. Only XBMC installed and some other apps.
Does anyone has any idea how to fix this?
I bought it here: http://www.aliexpress.com/item/TV-B...3188-2GB-RAM-8GB-ROM-CS918-AV/1392309954.html
The seller gave me link to some new firmware and no other info. Only "please download the firmware and install in your computer, and then connect the tv box to the computer, it will flash automatically ".

7ymekk said:
Hello,
My MK888 box worked smoothly only for two days. On third day I noticed that device is turned off. It can't boot up now. The PowerLED lights up for 5 seconds and it goes off. The video of this process You can see here: http://www.mediafire.com/watch/gcg1a43k9qceoem/CAM00200_compressed.mp4
Connecting OTG cable causes permanent glow PowerLED, until disconnected. I checked dmesg and it doesn't change when I connect device with OTG cable. Windows doesn't see it either. Connecting it with Recovery button pressed down doesn't help. It has stock rom without any modififcations. Only XBMC installed and some other apps.
Does anyone has any idea how to fix this?
I bought it here: http://www.aliexpress.com/item/TV-B...3188-2GB-RAM-8GB-ROM-CS918-AV/1392309954.html
The seller gave me link to some new firmware and no other info. Only "please download the firmware and install in your computer, and then connect the tv box to the computer, it will flash automatically ".
Click to expand...
Click to collapse
Follow his advice, re-install Stock Rom

Hammer_drum said:
Follow his advice, re-install Stock Rom
Click to expand...
Click to collapse
Read my post again. Especially these two sentenses:
I checked dmesg and it doesn't change when I connect device with OTG cable. Windows doesn't see it either.
Click to expand...
Click to collapse
"RK3188 (Quad-Core) Firmware Image Flashing: English RKbatch Tool v1.6" from http://www.rockchipfirmware.com/firmware-downloads doesn't see my device.

7ymekk said:
Read my post again. Especially these two sentenses:
"RK3188 (Quad-Core) Firmware Image Flashing: English RKbatch Tool v1.6" from http://www.rockchipfirmware.com/firmware-downloads doesn't see my device.
Click to expand...
Click to collapse
Are you holding the reset button on the device when connecting to the PC?

Hammer_drum said:
Are you holding the reset button on the device when connecting to the PC?
Click to expand...
Click to collapse
from the first post...
Connecting it with Recovery button pressed down doesn't help.
Click to expand...
Click to collapse

7ymekk said:
from the first post...
Click to expand...
Click to collapse
Sounds like a hardware fault in all honesty.
Mine turns itself off immediately sometimes but not on a consistent basis.
I would tell the seller of the issues about it not detecting, I'd make sure your drivers are up to date though.

The drivers are not an issue as the dmesg (linux tool) shows nothing, like no device is connected. It should show something. I thought that there is some hack for this or possibility to connect with JTAG or something. I will send it back to the seller.

7ymekk said:
The drivers are not an issue as the dmesg (linux tool) shows nothing, like no device is connected. It should show something. I thought that there is some hack for this or possibility to connect with JTAG or something. I will send it back to the seller.
Click to expand...
Click to collapse
HELLO,
i have exactly the SAME problem as you described with my tv box (i think it is T-R42 because it has bluetooth)
Also i have the stock rom , and also i bought the tv box from an aliexpress seller
Normally i keep it in operation (was about a week i didn't turn off it)
yesterday morning i found it powered off,
and when i try to power on it pressing the button,
the button light stays on for a few seconds, then it (and the device) turns off
Yesterday night i connected the tv box to my pc via otg cable.
When connected to the pc via otg, the light stays on.
Connecting the usb cable to the pc, and pushing the reset button under the tv box, my pc detects rk31sdk device, then asks to install drivers for it
Choosing automatic search of drivers, my pc find drivers for 'MDB device' and istall them... and the process ends correctly
But after a few seconds, windows finds another time the 'new hardware', and asks to install drivers... and so on
(I dont know if in this phase i did some wrong action, this evening i will try to find and install the right drivers...)
Then i downloaded the software for my tv box, including the Rockchip updater (RKAndroidTool.exe) and latest custom rom from wasser (forum freaktab.com) :
http://www.freak-tab.de/wasser/firmware-wasser-1.2.4.zip
Then i lauched the RKAndroidTool:
the first time it didn't find the device, so i tried to disconnect the tv box, reconnect it and press the reset button under the tv box
In that way, the RKAndroidTool detected the device.
I Clicked Erase IDB, and seems it worked find, endings OK
Then i selected all the software : Loader, Parameter, Misc, Kernel, Boot, Recovery, System and clicked 'RUN'
The process started, i saw:
Testing device: OK
Flashing Ram... OK
So i was happy, i thought i solved my problem...
instead i solved nothing, the device still had the same behaviour as before (the same as you described)
So i repeated the process, selecting only one update at a time, (only the Boot , only the Recovery, only the System etc)
The process seems always to work ok, because it ends with OK
But the tv box didn't change behaviour, the same problem remain
I noticed that sometimes during the update process the message 'Found RKAndroid Loader Rock USB' changed to 'NOT FOUND',
so i had to retry pushing the reset button to make it be found
I dont know how RKTool works, i have the suspect that messages tells OK also if it do nothing ...
this evening i will retry, installing the right drivers...

You are a lucky guy. Mine wasn't even detected by my PC. After maaany approaches of powerON+RecoveryButton dmesg showed the new device only once with following issue: "BOS descriptor failed.". The seller told me to send it back for replace, but they will cover only one posting cost. It cost me extra $16

7ymekk said:
You are a lucky guy. Mine wasn't even detected by my PC. After maaany approaches of powerON+RecoveryButton dmesg showed the new device only once with following issue: "BOS descriptor failed.". The seller told me to send it back for replace, but they will cover only one posting cost. It cost me extra $16
Click to expand...
Click to collapse
Hello,
i have still to test it,
but perhaps i got the solution for the problem:
a user from freaktab forum suggested me that the problem should be the power adapter:
he suggested me to buy a power adapter 5V , with 2A output minimum
I dont have such power adapter, if you have it, and you have not sent yet the tv box to the supplier, please check this solution and let me know!
Thanks

I saw this solution somewhere in the internet, but unfortunately I checked it with 2.5A adapter...it didn't help. I tested the standard adapter with multimeter and everything appeared to be fine. I already sent my device to the seller. I hope he will replace it.

7ymekk said:
I saw this solution somewhere in the internet, but unfortunately I checked it with 2.5A adapter...it didn't help. I tested the standard adapter with multimeter and everything appeared to be fine. I already sent my device to the seller. I hope he will replace it.
Click to expand...
Click to collapse
i found this thread on freaktab
http://www.freaktab.com/showthread....few-seconds-then-shuts-down-Bad-power-adapter
i will check if this solution will work with my tv box
In the case it doesn't work i think i will have also to send the tv box to the aliexpress seller...
but i dont know how to do it, and how much i have to pay
did you choose DHL shipment, or which other carrier?
I bought my t-r42 on october, now are passed 4 months... i dont know if i still can ask to the seller to replace it...
any suggestion?
Thanks!

I asked him through aliexpress:
Sign In -> My orders -> CHOOSE_YOUR_ORDER -> View Detail
at the bottom of this page I have some sort of chat feature.
DHL is out of the question! They take 20-40$. I sent it with Polish Post.

7ymekk said:
I asked him through aliexpress:
Sign In -> My orders -> CHOOSE_YOUR_ORDER -> View Detail
at the bottom of this page I have some sort of chat feature.
DHL is out of the question! They take 20-40$. I sent it with Polish Post.
Click to expand...
Click to collapse
Ok thank you,
if the power adapter solution doesn't work i will try to contact the seller
To be honest, i am not very satisfied of this tv box, it didn't work very well
for example i used skype (connecting it to a logitech c270 webcam), and it didnt work well... very often skype crashed, and camera app also had problems...
Perhaps i will ask to the seller if i can buy another model and can get some discount returning my tv box to him...

quad core android tv box Q7
I trie to make update the fimware after 1minute re line and write fails,
i try again an the recovery an the device is not work..
help me please.

Same problem
Did anyone could fix this? I have the same problem, any firmware, even the supposed stock one, fix the problem, the device doesn't boot.
I don't know what happens, it can update the firmware every time I want....

RKbatchtool is better than RKAndroidtool.
connect the box to the PC via OTG but do not connect the power. hold the recovery button and then connect the power cable.
if this still fails then try Maskmode. bit more complex and i would recommend a good read over at freaktab.com first. have to open the box up and short the 8th and 9th Pin on the NAND chip.
similar to this http://www.freaktab.com/showthread.php?1943-NEW-Unbrick-or-fix-NAND-on-the-MK808
and those with a Q7 box. dont use Wassers rom. it will load but bluetooth, wifi and ethernet wont work on it
Freaktab has roms for the q7

I had the same problem, I even brought device to my friend who work in repair shop and he don`t find any technical damage. Then one evening i was watching movie and all the time trying to connect it to pc and reset, and etc. then suddenly blue light start glowing and since then it is working very well, but my pc still dont recognize it

good price for cs918 tv box
Hi dear friend
Pls help to forward the message to the procurement officer.Thanks
^_^
CS918 TV BOX 1G $29 CS918 TV BOX 2G $32
We get your email address and know that you are interest in the tv box.
We would like to introduce our company and products, hope that we may build business cooperation in the future.
We are factory specializing in the manufacture and export of tv box for more than three years.;like hot sales MINIX \ MXQ \MXIII\ CS918 \ M8 \ M8S \ Arabic iptv box .and so on ...
Expressly, our price is very competitive because we are manufactory,
We also can put yourself logo on the tv box,And according to your request to add some design
As a very active manufactures, we often develop new designs , If you have interest in it, it's my pleasure to offer news to you regular.
Best regards
umtron.jack
Skype : um-jack
kik:jack um

CS918S Start up problem
I had same start up problem with my new CS918S TV Box.
contacted Seller and she gave me link to some new firmware and no other info. Only "please download the firmware and install in your computer, and then connect the tv box to the computer, it will flash automatically ".
I downloaded all the upgrade software as mentioned but still not working.
I went to my friend's home who is also using the same TV Box. Tested my TV Box with my friend's HDMI Cable, Power Adapter one by one. Finally, finding out when using my Power Adapter for the 2 TV Boxes they had the same startup problem. But using my friend's power adapter, both are working . Communicated with seller shop: China SmartView Digital Co. Ltd. Aliexpress Store no: 808900. She asked me to mail back to the manufacture direct but she doesn't be responsible for any cost.
I order a new power adapter cable from other supplier at my own cost.

Related

No connection through USB cable

since a few weeks, i've got a very strange problem with my blackstone.
when i connect the usb cable to my phone and the pc, it don't asks me anymore wether i want to connect it as a harddisk drive or do active sync. it's also impossible to do active sync by usb since this moment. i already tried everything in the blackstone USB2PC settings, like disabling fast synchronising, deactive/active the USB2PC pop-up and so on...
what i found out yesterday is the following:
because i did a hard reset, i didn't had any contacts on my phone, so i tried to active sync over bluetooth. that worked perfectly and after the synchronizing was finished, the USB connection worked again, but only for a few minutes. afterwards i had the same problem again. nothing happened when i connected the USB cable. i was able to do the same thing again: synchronize by bluetooth, connect USB cable and it worked again for a few minutes. unfortunately i wasn't able to flash hardspl during this time period. it found the phones bootloader version, but when i wanted to start the flashing process, it said that it can't estalish a connection to the phone (tricolo bottsreen has been started and progressbar was visible, but on 0%)
i also tried it on 3 different pc's with 2 different USB cables...
normaly i would say now, that my blackstone has a defect due to the fact that i did a hard reset and it's still not working, but how is it possible that it works for a few minutes after synchonizing by bluetooth?
does anyone has an idea??? i don't want to give away my lovely blackstone for warranty
btw. is there any possibility to flash a new rom without using the usb cable? even with the soft spl method i've found, you have to use the cable even if the rom itself is flashed from the sd card...
Black Stone usb device picking as "unknown device"
i am also having the same problem please help me
Maybe i'm having a similar issue:
My HD is not recognized anymore via USB Cable. I tried different computers with different Windows Versions. (7, Vista, XP)... No Connection anymore.
Bluetooth Connection works!
I did follow all suggestions... nothing works.
Could it be, that i flashed my HD too much? Is it broken now?
have you all checked your 'USB to PC' settings?
wellers said:
have you all checked your 'USB to PC' settings?
Click to expand...
Click to collapse
Hi,
I have this problem with one of my PC as well. It was working previously. I already checked 'USB to PC' settings
kkchan said:
Hi,
I have this problem with one of my PC as well. It was working previously. I already checked 'USB to PC' settings
Click to expand...
Click to collapse
Yes, checked every of the common suggestions given in this situation.
Could it be a hardware fault?
As i told, it doesn't work on any PC! Feels like Touch HD's mini USB port is dead. Strange thing ist, that it says chargin when connection the cable. But no other reaction than charging.
is there still no solution for this problem?
i already found like 20 people now with the same problem, posting in several different threads. seems like this really is a big problem of the blackstone...
I had this problem with Duttys rom afgter plugging my HD into works pc to use internet sharing.I had to do a hard reset to sort it out sorry ts not much help but its the only way i sorted it after buying 3 new leads!
Using the stock ROM 1.14, never ever flashed a ROM. However, for a few days, I have been unable to connect my Blackstone with Windows Mobile Center (OS = Windows Vista SP1), it just fails with an (unspecified) error. I can only connect my device as a disk drive, not via ActiveSync anymore. It used to work before.
I am currently investigating whether or not the recent firewall upgrade (to Norton 360 3.0) on my computer may be the root of the problem. I'll keep you informed...
EDIT: performed an uninstall of the Windows Mobile Device Center, restarted the computer, re-installed the WMDC using the HTC CD provided with my Blackstone -> voilà, it works again
EDIT2: probably my problem was not related with the ones described here above, but who knows, maybe it will help others ...
i also hv the same problem
cannot synchronize...
last week just facing the same problem as u guys.. nothing is work.. the port just able to charge only....
did watever I can... no luck...
some time when I plug in cable.. the unit prompt "this device didn't support USB headset, please remove"...
end up..
send the unit to repair.. the shop said USB chip spoil... have to replace...
get it replaced and now back to normal...
bufung said:
last week just facing the same problem as u guys.. nothing is work.. the port just able to charge only....
did watever I can... no luck...
some time when I plug in cable.. the unit prompt "this device didn't support USB headset, please remove"...
end up..
send the unit to repair.. the shop said USB chip spoil... have to replace...
get it replaced and now back to normal...
Click to expand...
Click to collapse
is the USB chip soil under warranty? or i hv to fork out my own money?
USB Dead
Same issue here.......... Can charge but can't sync. Even in the boot loader I'm not getting anything. ... as soon as I remove the USB cable it says serial. Tried changing everything
Help anyone?
My mate has this very same problem, cable charges the phone but no connection (or popup) happens.
Anyone any further with this problem ?
elab said:
My mate has this very same problem, cable charges the phone but no connection (or popup) happens.
Anyone any further with this problem ?
Click to expand...
Click to collapse
Same here.. problem just started.
Hi Guys
The problem with the USB Connector in the phone.Four Months back I got the same issue with USB, since I had warranty I sent it to HTC Service centre to repair, they send me back in four working days in working condition. If your in UK it will be return in 3 to 4 working days.
goto HTC website and find the service centre phone no.
cheers
joe.
when i connect the usb cable to my phone and the pc, it don't asks me anymore wether i want to connect it as a harddisk drive or do active sync.
Click to expand...
Click to collapse
I already have Blackstone. Maybe You already checked Settings\Connections\USB to PC location. There is "Ask me first about USB connection type...". If my understaning is good then here must be this checkbox set to checked.
Second thing for those users who cannot use syncing only : I had and antivirus program and it has personal firewall. When I turned OFF antivirus protection and the firewall protection then the Windows Modile Device Center start working without any problems with Active sync in my phone.
Dr. Morpheus said:
I already have Blackstone. Maybe You already checked Settings\Connections\USB to PC location. There is "Ask me first about USB connection type...". If my understaning is good then here must be this checkbox set to checked.
Second thing for those users who cannot use syncing only : I had and antivirus program and it has personal firewall. When I turned OFF antivirus protection and the firewall protection then the Windows Modile Device Center start working without any problems with Active sync in my phone.
Click to expand...
Click to collapse
I checked all, but these are not cases
Interesting, I did a sync last night and today, I can't do it!
But if I use the phone as a modem for Internet, my blackstone connects without problem through cable.
Wich is the mystery?
gtdor said:
I checked all, but these are not cases
Interesting, I did a sync last night and today, I can't do it!
But if I use the phone as a modem for Internet, my blackstone connects without problem through cable.
Wich is the mystery?
Click to expand...
Click to collapse
I solved the problem. It seems that the ROM version was the problem for me:
ROM: BS_Cloudy_1.9
RADIO: 1.14.25.24
Manila: 2.5.20121225.2
I solved using "Clear Storage." After reset, reverting to original settings (original settings actually were, because I put this ROM only for two days), I was able to connect to the PC and was able to flesh another ROM
I hope that this ROM is more stable.
Hi guis, I have de same problem with usb connection, I would to send my blackstone to assistance but i have to instal first the original spl!
Is possible to restore it trough memory card and non trough usb??
Tanks

[Q] Connect To PC mode not working

Hopefully this belongs in this forum, I do have a focus, so I assume so.
So when I cget into connect to PC mode and plug in the usb cord, it does not truly connect with the computer, meaning the red sign thing that means don't disconnect does not appear, the screen just shows the screen with an arrow pointing the usb to the computer.
Would this be a hardware issue?
I've tried my two usb cords on different ports on my laptop.
Any advice?
I've tried more or less every other fix, but there really is no fix online for this issue, can barely find anything.
Use the USB cable that came with the phone. Other ones do not work with the Focus.
Same problem, even when I'm using original cable.
Yeah, I've tried both of my cables, and nothing works.
Kind of nice to know that I'm not alone though. Heh
Same exact problem. Samsung Focus. Original cable that came with that very phone.
I can't get the frigging updates to install because when the phone reboots in Connect to PC mode, the system doesn't recognize that it's been reconnected.
And when I try to use the WP7 support tool, which ALSO requires the phone to be in Connect to PC mode, the computer doesn't know the phone exists.
This is for C2PC mode ONLY. Recognizes fine in normal mode, but update won't complete in normal mode.
same thing intially happened to me. But when in pc download mode you have to make sure that you give your pc 5 mins while connected to your phone. The pc will eventually recognize it! I freaked out too but I did wait for it and it connected. This applies to the windows phone recovery tool, which i ran, and the updates alike. I highly suggest running the recovery tool because I tried updating without it at first and i received the timeout error. Also, make sure you empty in settings histories in the following sections, ie mobile, maps, and search.
You guys and gals are going to LOVE this.
Nothing worked, and of course, my obedient ass was using only the cable that came with my Samsung Focus.
So on a hunch, I decide to borrow my wife's cable from her HTC Surround. The damn thing has "HTC" stamped right on it.
And it worked. PC recognized connection in the Connect to PC state, which it absolutely would not do with the Samsung Focus cable.
As to siralex241's comment, good advice: when you use the Windows Phone 7 Support Tool, after it checks System Requirements, it will say nothing -- not even that it's trying anything, and no hard drive activity -- for a long time. Then it succeeds in one second. The message I saw was that installing updates had taken over 450 seconds.
Jay
Solution for update error 800705B4
Same thing happened to me. Kept getting error code 800705B4. Followed steps here and it worked fine. http://support.microsoft.com/kb/2530409.
I'm on to the March 2011 update. Been creating the backup for a LONG time now.
Well to be specific I have been getting error 8018121C1 (Something close to that) and all the KB articles say is to use the microsoft fixit tool, but that never works. It mentions that its a problem with the driver installing, and I've read online that when in connect to PC mode, Zune times out the update because it is looking for the drivers for too long. Along with that, other people have said that the device isn't being recognized as the right device. I've checked and so far I've seen that it recognizes as Windows Mobile or Zune. I don't think any of those are the right formats to have the update go through smoothly.
I have given up on updating the phone as of now. That is, until I can find a working solution.
I don't think I should contact Microsoft or AT&T about it either, simply because I think that Microsoft will just give me the KB articles, and AT&T... welll.. its AT&T.
@ jayinatlanta I have yet to try connect to PC with a different cable though.

Nexus 7 Not Showing Up In Device Manager

Let me start by stating that I have read through pages of various threads on here & haven't found an answer... Or at least I haven't found an answer in laymen's terms that I can understand. So, if/when offering help, please break it down for me a little. Thank you!!
I just purchased a Nexus 7. When I plug it in to my Windows 7 PC, nothing happens. It doesn't install any device drivers. It doesn't appear anywhere in my device manager. Nothing. After reading several posts, I downloaded drivers from Asus's site, but now I don't know how to install them. I came across this comment from "MrTrackZed" in another thread (one I can't yet post in):
"After you download the driver, unzip/extract its contents. Then you go to your device manager on your PC, and plug in your Nexus. You'll see it with a yellow exclamation point, right click it and select update driver. You can then select this driver manually. Also, if using Wug's root method, make sure you configure the fastboot driver as well. I don't have my PC with me, but I believe its step 6 in the driver install process. Its all very easy, sounds confusing, but its not. Good luck! "
I totally understand that, but what do I do if the device isn't even showing up in the device manager? I've plugged it in to 3 different computers (2 windows 7 & one Windows XP) and it does nothing on any of them. The device does show that it's charging, but nothing else. Please help. This is driving me nuts. Oh, and I've done all of this while having debugging on & off. Same results.
~Clint
U may just have a bad device! I have seen posts similar to this and after a device exchange they have no problems.
The fact that It doesn't register on three different computers means that or a bad cable.
Sent from my Nexus 7 using Tapatalk 2
When you plugin your phone, on your phone, you need to click USB Storage, did you do that?
Another thing to try is to enable Debuging on your phone, and install drivers, to check if device manager can detect it.
We have a package contains the right drivers for your device, you may want to download and try it. We have Nexus 7 users works fine.
http://www.vmlite.com/vaac/
This is for our vmlite vnc server, but it may help you, as it installs USB drivers.
huisinro said:
When you plugin your phone, on your phone, you need to click USB Storage, did you do that?
Another thing to try is to enable Debuging on your phone, and install drivers, to check if device manager can detect it.
We have a package contains the right drivers for your device, you may want to download and try it. We have Nexus 7 users works fine.
This is for our vmlite vnc server, but it may help you, as it installs USB drivers.
Click to expand...
Click to collapse
I did as you suggested & installed both the PC client & downloaded the app from google play. Still nothing... The device works perfectly except for this one issue. It's making me crazy!
can you run this command to debug? (open a command window on Windows)
"c:\program files\vmlite\AndroidAppController\adb.exe" devices
what is the output message?
It just occured to me that some USB cable is charging only, this morning, I got such a cable, there is no USB device showing up in device manager with that USB cable, once I switched to another data cable, it works.
You may want to change to another usb cable to test.
Problem Identified
Okay, so after much research, I think the problem has been identified. The one thing that I've found in common with all the threads that discuss this problem is that we've all, at one point or another, used a USB car charger to charge our N7. I've found that most cheap USB chargers only put out at about 1 amp. The N7 is trying to pull 2 amps. This is causing the USB cable to overheat & damage the USB connector on the N7. Unfortunately, once the damage is done, it's done. Fortunately for me, I purchased my N7 at a local retailer that had a 30 day return policy & they gave me a new N7. It works great & I've ordered a 2.1 amp USB car charger to prevent this from happening in the future.
huisinro said:
It just occured to me that some USB cable is charging only, this morning, I got such a cable, there is no USB device showing up in device manager with that USB cable, once I switched to another data cable, it works.
You may want to change to another usb cable to test.
Click to expand...
Click to collapse
Thank you for the reply, but I am using the OEM N7 USB cable. Plus, I used 3 other cables to no avail. See my previous comment though. I've identified the error.
Sorry for the bump, but are you saying that (under)charging at 1A essentially breaks the N7? Wow. You'd think it would break if you'd feed it 5A or so, not at less than 2!
I think I'm having the same issue now. I can charge, but no debugging for me since my computer doesn't even notice a USB device. Must have happened in my car once when I was trying to charge my phone and my N7 at the same time. (Since then I can't charge any phone at all in the car using that charger.) Let's see if I can find the warranty slip.

ARUnchained + Reloaded + Android Sticks

This will be a thread for ARUnchained users that are using Android Sticks instead of the traditional phone as their interface device. Any users that have info or tips, please feel free to post and lend a hand. I would like to see setups, tips, tricks, ROMs, kernels, etc. Basically anything that new or even experienced users would like to know or learn.
I will be getting my CX-919 soon and I will be posting my experience in getting everything setup and going. But don't wait for me, anybody that has already been through this, get things going. I may need the help!
Lets get rolling.......................
Mk809iii working flawlessly with arur version 6
Sent from my SM-N900A using XDA Free mobile app
I'm tired plugged/unplugged my N5 daily. Would like a more permanent solution. Please do share your setup tips. And which model works best with ARU? Amazon link please.
m.a.s.e said:
Mk809iii working flawlessly with arur version 6
Sent from my SM-N900A using XDA Free mobile app
Click to expand...
Click to collapse
Thanks! Are you able to use GPS? If so, how do you do it?
Sent from my SM-G900M using XDA Premium 4 mobile app
This is the one i bought:
http://www.amazon.com/gp/product/B00KNPRJ10/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
its dual core - way more then enough to put in the car.
rooting the stick took me a while to find the right method for this specific model, but i got it and it worked like a charm. rooted in 1 minute. If u guys end up buying the same stick i will upload and write instructions.
i have the App Radio 3 with the pioneer original android cable kit which is perfect.
it give power to the stick and it is connected via HDMI.
there are other custom ROMS for this stick but i found them useless to my needs since all they do is claim that 1080P support is better improved, which is irrelevant to our case since we never gona stream 1080P in the car.
i set up my google account and it took me roughly 1 hour to get everything set up the way my phone is...
since its an android stick and im not afraid of battery drain i put a live wallpaper on it which was cool.
it get internet via my phone tethering, works like a charm.
the first initial set up needed a keyboard and a mice. after that i also purchased one as a backup:
http://www.amazon.com/gp/product/B00AIHYHJA/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
just to have it in the car, just in case...
also dont forget to buy this if u are using an HDMI cable coming out of ur App Radio:
http://www.amazon.com/gp/product/B004PVW1DE/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
other then that ARU-Reloaded worked perfectly on that model,
sometimes the stick BT get disconnected , u know like any other software they all got bugs, but after 10 seconds its reconnect and ARU - Reloaded recognize that and reconnect automatically.
ARUR is set to start on boot so all i need is to turn the car on and i measured 1.30 minutes till i get touches.
GPS always worked for me with zero issues when ARUR is connected.
m.a.s.e said:
This is the one i bought:
http://www.amazon.com/gp/product/B00KNPRJ10/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1
its dual core - way more then enough to put in the car.
rooting the stick took me a while to find the right method for this specific model, but i got it and it worked like a charm. rooted in 1 minute. If u guys end up buying the same stick i will upload and write instructions.
i have the App Radio 3 with the pioneer original android cable kit which is perfect.
it give power to the stick and it is connected via HDMI.
there are other custom ROMS for this stick but i found them useless to my needs since all they do is claim that 1080P support is better improved, which is irrelevant to our case since we never gona stream 1080P in the car.
i set up my google account and it took me roughly 1 hour to get everything set up the way my phone is...
since its an android stick and im not afraid of battery drain i put a live wallpaper on it which was cool.
it get internet via my phone tethering, works like a charm.
the first initial set up needed a keyboard and a mice. after that i also purchased one as a backup:
http://www.amazon.com/gp/product/B00AIHYHJA/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
just to have it in the car, just in case...
also dont forget to buy this if u are using an HDMI cable coming out of ur App Radio:
http://www.amazon.com/gp/product/B004PVW1DE/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
other then that ARU-Reloaded worked perfectly on that model,
sometimes the stick BT get disconnected , u know like any other software they all got bugs, but after 10 seconds its reconnect and ARU - Reloaded recognize that and reconnect automatically.
ARUR is set to start on boot so all i need is to turn the car on and i measured 1.30 minutes till i get touches.
GPS always worked for me with zero issues when ARUR is connected.
Click to expand...
Click to collapse
I just ordered the stick that you linked on Amazon. Should be here Saturday. I'll definitely need to pick your brain on rooting this. Are you running constant power or is it shutting off every time you shut the car off?
Sent from my SM-N9005 using Tapatalk
@m.a.s.e
Did you install GPS Injector? Are you using Maps?
Sent from my LG-VS980 using Tapatalk
to answer your questions:
1. i am using ARU reloaded hence the injector app is pre installed and no need for a separate app. i am using google maps, but any other GPS app will work. The stick get immediate GPS lock on my car with no issues.
With ARU-R (reloaded) you can configure some settings like auto start on boot etc... There are some recommended config for sticks and that works great for me.
2. ill gather the root files and write a txt with short instructions and upload to this forum for those who buy the mk809III and want to root it.... its simple and require 3 reboots of the stick... overall roughly 2 minutes work. after that u are rooted.
u will need a keyboard and a mice in ur car for the initial setup, after that ur good.. (connect to the car BT) .
3. I am connected to power with the AR3 android KIT, each time i turn off my car the stick loses power. From starting the car to full connection i measured 1.45 minutes. which is not bad.
i looked at connecting the stick directly to the car battery but honestly 1.30 minutes is not bad at all...
4. if you are using an HDMI cable from ur AR HU to ur stick dont forget to buy this:
http://www.amazon.com/gp/product/B00...?ie=UTF8&psc=1
that way u dont need to take the HU out to put the stick directly to the radio and u can leave the stick in the glove box for easy convenience.
what else do u guys need to know?
next thing i am looking at is see how i can get a SIM connected to the stick via USB... my only prob is how to get a sim from my carrier that wont cost me pewr month...
Hi All,
ok so i have zipped the files needed to root the MK809III and added additional files:
Instructions:
Use Windows 7.
*. Unrar the compressed file to a folder on ur computer.
*. Plug the stick power supply to the wall outlet.
*. Attach the supplied micro USB to the SIDE micro usb port on the stick.
*. Connect to your computer USB port.
*. Let windows "try" to find the drivers, it will fail.
*. Point to the "Driver" folder i provided for the appropriate driver (go to the subfolder per ur OS).
--- if this doesnt work for u, let me know i have additional files and i dont remember which one worked, ill supply if needed ---
*. After driver installed and u verified the device is recognized in device manager go to the folder u extracted and run "TPSparkyRoot.bat"
*. Follow the script instructions. If will ask u to connect --> it will say if it recognized and ask u to click the enter key to reboot the stick --> let it reboot, once it is again recognized in ur USB port and fully powered on --> click enter again on the script --> repeat this step according to the script output 3 times.
*. After the stick is rebooted 3 times (never take it out of the USB port) it will be rooted on the last reboot.
*. Configure to ur home WiFi.
*. Configure ur google account and everything as u want.
*. Run to ur car with a stupid smile on ur face and tell ur wife/child/dog "i did it, i did it".
*. Connect to ur car BT using keyboard and mice, configure everything.
*. Write on facebook this post "MK809III + AR3 = Pure awesomeness" and ignore all the replies and let ur friends freak out cause they dont know what they hell u r talking about.
Where do you get ARU Reloaded? Play Store or do you just have to donate to Area51?
Sent from my SM-N9005 using Tapatalk
mad212 said:
Where do you get ARU Reloaded? Play Store or do you just have to donate to Area51?
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
donate and get to the G+ group. when it will go to the playstore u already have a license.
I was just going to link to mase's guide, but I see he already posted it in both spots.
When someone finds a way to make Google Now voice stuff work with my phone contacts, and tethering phone calls and text messages from my phone to the Android stick, I'll buy one to try out. I have a remote start so I'm not too worried about startup time myself.
I am also curious if someone can hack Chromecast to work streaming the phone screen using the wi-fi tether from the phone...that would be even better than a USB stick and boot up times are in the seconds rather than a minute.
m.a.s.e said:
also dont forget to buy this if u are using an HDMI cable coming out of ur App Radio:
http://www.amazon.com/gp/product/B004PVW1DE/ref=oh_aui_detailpage_o07_s00?ie=UTF8&psc=1
Click to expand...
Click to collapse
Mase thanks for posting that HDMI coupler. Was looking for this. I think I'm going to try mirror via Chromecast again now that it's officially supported on the Nexus 5. If that doesn't work well I'll go "stick" by route following your instructions.
Thanks again. And I'll keep y'all update on my Chromecast experiment.
Just received mine today , tried to connect the stick to my win 7 pc but the stick doesn't even register when I plug it into the usb , tried a different pc and get the same problem . Any ideas ?
I had to work with mine a lot to get into flash mode. You have to be sure about some USB settings. Go to freaktab.com and register, its FAR more info than xda. Look for Finless 2.0 for your stick and download it, the READ ME file is a great help!
Sent from my LG-VS980 using Tapatalk
Connect to TV and to PC...on stick setting go to USB and switch on the option "connect to PC" your PC will recognize a USB device....just install the rockchip drivers.....
Enviado desde mi GT-I9300 mediante Tapatalk
dogstar said:
Just received mine today , tried to connect the stick to my win 7 pc but the stick doesn't even register when I plug it into the usb , tried a different pc and get the same problem . Any ideas ?
Click to expand...
Click to collapse
in the stick settings dont forget to put it in USB mode, connect the cable to the side micro USB port and enable debugging as well.
and to install the drivers.
Cheers guy's I have it rooted now but have run into another couple of problems , firstly I cannot get touch working with reloaded no matter how many times I connect and disconnect Bluetooth and icons and text seem to be very small ,would I need to change something like dpi?
dogstar said:
Cheers guy's I have it rooted now but have run into another couple of problems , firstly I cannot get touch working with reloaded no matter how many times I connect and disconnect Bluetooth and icons and text seem to be very small ,would I need to change something like dpi?
Click to expand...
Click to collapse
First, what stick did u get? second, u used a keyboard and mice for the initial setup with AR? also, did u verify in AR u have it set to other?
also, for DIP use an app called app settings to change app level DPI
OK so I got my stick (same one that m.a.s.e linked to) I got it rooted and got touch working on my appradio2. My issue is when I turn the car back on. Since it takes a little while for the stick to boot and for arunchained to start up I have to keep pressing yes so the AR will keep trying to connect to bluetooth. How are you guys dealing with it? I would really like to run constant power to avoid waiting for boot time, Anyone done this yet?

Firmware Update for the C.T.R.L.R Controller

There is a Firmware Update for the C.T.R.L.R Controller
[download section of the mad catz home page] (i'm not yet allowed to post urls)
My C.T.R.L.R was included when I bought my Mad Catz Mojo.
I found that Guide:
url (google for "Product Update Guide: XInput")
And a page about the Update:
url (google for "C.T.R.L.R with XInput Update – Ready to Game on PC")
(one guy in the comments says that the update is not possible for the C.T.R.L.R Controller that was packaged with the mojo - is that possible? - isn't it the same controller that is selled separately?
However, when I tried to install the new Firmware, I got the instruction from the software to push the "next title" + "last title" buttons for 3 seconds to bring the C.T.R.L.R Controller in a "firmware update mode" in order to continue the update procedure. Nothing happened when I pushed the buttons.
I have also installed the Driver and Software from the download page, but I was not able to perform the firmware update.
Was anyone able to install the firmware update?
There are many optimisations and fixes included in the update, therefore, it seems to be worthy.
I opened a ticket about this very problem with Mad Catz. Their responce was that we can't do a firmware update with the C.T.R.L.R. Controller that came with the Mojo. What a rip off!
This is actually crazy... i bought the mojo for £49.99 from amazon a few days ago... power it on.. controller wont connect so cant get past the setup language screen... make it all worse its set to goto sleep after 2mins so have to keep getting up to reinsert the power.... purchase a cheap usb keyboard to set it up... turn on bluetooth.. spend literally a day on google and on here trying to work out how to connect the controller, still wont connect... wont connect to my s4 neither... only my laptop. :/ i too found the firmware update and got stuck on the same place as you guys..... no wonder this has dropped so much in price.... im about to try tech support, spend one more day on it, then il be shipping it back to amazon...
blazegmc said:
This is actually crazy... i bought the mojo for £49.99 from amazon a few days ago... power it on.. controller wont connect so cant get past the setup language screen... make it all worse its set to goto sleep after 2mins so have to keep getting up to reinsert the power.... purchase a cheap usb keyboard to set it up... turn on bluetooth.. spend literally a day on google and on here trying to work out how to connect the controller, still wont connect... wont connect to my s4 neither... only my laptop. :/ i too found the firmware update and got stuck on the same place as you guys..... no wonder this has dropped so much in price.... im about to try tech support, spend one more day on it, then il be shipping it back to amazon...
Click to expand...
Click to collapse
That sucks, not even passing the language screen. But don't give up hope; try these few tricks:
1) Get new AAA batteries (I prefer using recheargeable ones)
2) if that doesn't work, remove the batteries and use your S4 charging cable to power the CTLR. There is tiny USB input behind the batteries.
3) swap the usb dongle bluetooth receiver between the 3.0 and 2.0 input slots on the MOJO
4) If the CTRLR just won't connect, try using either a USB mouse (either cable or wireless). I've been using a wireless mouse for the past couple months since I don't play games that much, it works flawlessly).
**Make sure you're not far from the MOJO when you're attempting these solutions.
If it works, make sure you update the MOJO firmware (205 something). Most issues with the stock CTRLR will stop after that. Also, if you continue using that CTRLR you can use the 2.0 slot and use the 3.0 input for your external HDD for example.
If none of these works, something might be wrong with your CTRLR. You could ask for a return or exhange.
But I will tell you, once this baby works, you will fall in love with it.
But honesty, I didn't really need the CTLR to be updated. For my purposes, it works just fine. Since I mostly watch videos on the MoJo, a simple wireless mouse does all the job for me.
AndroidSupaFan said:
That sucks, not even passing the language screen. But don't give up hope; try these few tricks:
1) Get new AAA batteries (I prefer using recheargeable ones)
2) if that doesn't work, remove the batteries and use your S4 charging cable to power the CTLR. There is tiny USB input behind the batteries.
3) swap the usb dongle bluetooth receiver between the 3.0 and 2.0 input slots on the MOJO
4) If the CTRLR just won't connect, try using either a USB mouse (either cable or wireless). I've been using a wireless mouse for the past couple months since I don't play games that much, it works flawlessly).
**Make sure you're not far from the MOJO when you're attempting these solutions.
If it works, make sure you update the MOJO firmware (205 something). Most issues with the stock CTRLR will stop after that. Also, if you continue using that CTRLR you can use the 2.0 slot and use the 3.0 input for your external HDD for example.
If none of these works, something might be wrong with your CTRLR. You could ask for a return or exhange.
But I will tell you, once this baby works, you will fall in love with it.
But honesty, I didn't really need the CTLR to be updated. For my purposes, it works just fine. Since I mostly watch videos on the MoJo, a simple wireless mouse does all the job for me.
Click to expand...
Click to collapse
cheers for the reply.. i tried the suggestions and it just keeps flashing blue and red ... ive given up on the CTRLR... now have it setup with a rii wireless keyboard and an old firestick remote that i connected via bluetooth.... i wont be playing games anyway, just wanted it for streaming upstairs....
That means it's just not connecting. Sorry about that. For streaming purposes, you should be fine with your current setup though.
Perhaps Mad Catz can replace your CTRLR, did you inquire?
Drakey83 said:
I opened a ticket about this very problem with Mad Catz. Their responce was that we can't do a firmware update with the C.T.R.L.R. Controller that came with the Mojo. What a rip off!
Click to expand...
Click to collapse
Thank you for that important information. So I'm not able to update the firmware. I think there should be a note on the homepage about that. Hours of lifetime are lost because that information is not provided on the homepage.:crying:
AndroidSupaFan said:
That means it's just not connecting. Sorry about that. For streaming purposes, you should be fine with your current setup though.
Perhaps Mad Catz can replace your CTRLR, did you inquire?
Click to expand...
Click to collapse
i got an email back from them today asking me to try a few more steps that i will try in the morning.. They said if it still fails if i get back to them with proof of purchase they will send me a replacement which is pretty good of them :good:
blazegmc said:
i got an email back from them today asking me to try a few more steps that i will try in the morning.. They said if it still fails if i get back to them with proof of purchase they will send me a replacement which is pretty good of them :good:
Click to expand...
Click to collapse
The CTRL, is the best part of the MOJO :good:
I use it a lot on other BT4 devices, my phone, PC and mojo.
Try connecting on other devices, it could be the dongle that has a problem.
If there is an update, it would be for the retail version, but not sure what it would do.
ftp://ftp.saitek.com/pub/software/full/CTRLR_Range/
looks like it's just PC software
Bit of a shot in the dark here. I've got the retail version of the controller, updated firmware and though I've followed the calibration steps to a T - it's borked.
Triggers don't register at all, right stick is slowly panning up and left and there are random triggers of some of the hard buttons.
Has anyone successfully updated any version of this controller?
Edit:
Reflashed the fimrware and tried again. Working now. Not sure what went wrong, failed flash?
qirby said:
...
However, when I tried to install the new Firmware, I got the instruction from the software to push the "next title" + "last title" buttons for 3 seconds to bring the C.T.R.L.R Controller in a "firmware update mode" in order to continue the update procedure. Nothing happened when I pushed the buttons.
...
Click to expand...
Click to collapse
I had the same issue unitl I realized that I have another model number where I had to press the "<<" and ">>" buttons at the same time. After that, firmware update was working.
Ive tried the above and didnt work either has anyone ever got past this operation issue with the update. Ive connected the device with usb cable ok, I have a solid red light on the controller, presses both keys as instructions state and nothing progresses, the usb install was the last thing that actually worked.
Cant believe its so rubbish to get an update working - ridiculous
Cant find any profiles for this controller like MC 4, etc.
Any help on this device or is it dead in the water.
ATB
Hi did you guys figure out if there is anyway to update the controller that comes with MOJO model 32263? I cannot get it working with usb on my computer.
Mojo Pack-in C.T.R.LR. Update
Hi All,
Looking for same info on the pack-in controller that came with the Mojo. I put my Mojo away, I bought a shield a few years back and never looked back. I would like to use the controller (C.T.R.LR.) that came with the Mojo but I can not get it to pair with anything outside of the original Mojo. Has anyone been able to get the update to work, I ran into the same issues as other here, pressing the << and >> does nothing and I can not update the firmware. Would like to use the controller with my cellphone but it will not pair. Thoughts?
Thanks!
Cap V

Resources