Hello, yesterday installed installed a custom ROM Roma KF 2016 and before the installation does not detect my phone because I wanted to upload Odinie TWRP, but I found that it can have, and, although I had already loaded, I have uploaded the system, then decided to return to the 6.0.1 stock. Odin still does not detect so I decided to turn off the OEM unlock, I thought it might through it. Well, now it is the max lime because he sees it to me on WIN XP as .. Unknown device, 7 and 8.1 do not even hear the sound device is connected, and on the phone FRP Lock and even the recovery can not enter because everything after blocking, I might add that before Odin always seen it, and even how it happened to me that the FRP LOCK blocked my phone, I have uploaded a new and everything was ok. Please help, I'm without a phone. I tried to 4 PC and 3 cables. I have no idea what's going on.
Solved!
Related
So i was just watching some videos when i remembered that i had OEM unlocking turned on or off so i thought . Wait! i didnt root my phone properly so if i go back to the previous setting it should be all-right. So I enabled OEM unlocking and i continued watching youtube. Then when i turned it off everything was fine but when i turned it on it shows Custom binary blocked by FRP secure fail:kernel.
So i thought that it just bricked like it had always done.( i have bricked my phone 2 times before.) so i tried loading up Odin and flashing it through my ROM and when i tried to connect my phone to my computer odin didnt pick up the signal of the usb cable my phone and pc were connected to. I tried switching cables tried everything i could find but nothing worked for me so basically.
I enabled/disabled (cant remember) OEM unlocking --> tried to get it back with odin --> odin didnt detect my phone --> tried everything i could find without luck.
Please help me its 19 PM and i have to go to school tommorow my parents are going to kill me. :crying:
MarissRDKS said:
So i was just watching some videos when i remembered that i had OEM unlocking turned on or off so i thought . Wait! i didnt root my phone properly so if i go back to the previous setting it should be all-right. So I enabled OEM unlocking and i continued watching youtube. Then when i turned it off everything was fine but when i turned it on it shows Custom binary blocked by FRP secure fail:kernel.
So i thought that it just bricked like it had always done.( i have bricked my phone 2 times before.) so i tried loading up Odin and flashing it through my ROM and when i tried to connect my phone to my computer odin didnt pick up the signal of the usb cable my phone and pc were connected to. I tried switching cables tried everything i could find but nothing worked for me so basically.
I enabled/disabled (cant remember) OEM unlocking --> tried to get it back with odin --> odin didnt detect my phone --> tried everything i could find without luck.
Please help me its 19 PM and i have to go to school tommorow my parents are going to kill me. :crying:
Click to expand...
Click to collapse
Flash stock rom from updato.com via odin.
enabled OEM unlocking and when turned off my phone it bricked.HELP!!!!
So i was just watching some videos when i remembered that i had OEM unlocking turned on or off so i thought . Wait! i didnt root my phone properly so if i go back to the previous setting it should be all-right. So I enabled OEM unlocking and i continued watching youtube. Then when i turned it off everything was fine but when i turned it on it shows Custom binary blocked by FRP secure fail:kernel.
So i thought that it just bricked like it had always done.( i have bricked my phone 2 times before.) so i tried loading up Odin and flashing it through my ROM and when i tried to connect my phone to my computer odin didnt pick up the signal of the usb cable my phone and pc were connected to. I tried switching cables tried everything i could find but nothing worked for me so basically.
I enabled OEM unlocking --> Shut it down --> showed the error Custom binary blocked by FRP --> tried to flash it with odin --> odin didnt detect my phone --> tried everything i could find without luck.
Please help me its 19 PM and i have to go to school tommorow my parents are going to kill me.
Phone - Samsung Galaxy J5 (SM J500-FN) 2015
MarissRDKS said:
So i was just watching some videos when i remembered that i had OEM unlocking turned on or off so i thought . Wait! i didnt root my phone properly so if i go back to the previous setting it should be all-right. So I enabled OEM unlocking and i continued watching youtube. Then when i turned it off everything was fine but when i turned it on it shows Custom binary blocked by FRP secure fail:kernel.
So i thought that it just bricked like it had always done.( i have bricked my phone 2 times before.) so i tried loading up Odin and flashing it through my ROM and when i tried to connect my phone to my computer odin didnt pick up the signal of the usb cable my phone and pc were connected to. I tried switching cables tried everything i could find but nothing worked for me so basically.
I enabled OEM unlocking --> Shut it down --> showed the error Custom binary blocked by FRP --> tried to flash it with odin --> odin didnt detect my phone --> tried everything i could find without luck.
Please help me its 19 PM and i have to go to school tommorow my parents are going to kill me.
Phone - Samsung Galaxy J5 (SM J500-FN) 2015
Click to expand...
Click to collapse
Hmm, try reinstalling the drivers and reboot the system on your PC
Hi Guys,
Today I think I bricked my phone and I would appreciate any help.
I will describe the whole situation.
So around 2019 May, I rooted my device and decided to flash a stock based,debloated custom rom. Everything work just fined including downloading mode and recovery menu. Today, I decided to try out [S7/S7 Edge][OneUI Pie][JetBlackUI] LightROM, however strangely I was not able to boot either to TWRP neither to downloading mode via key combination.
However I had install TWRP app and from there i was able to boot to recovery mode,install the new rom and try it out.
For some reason root was not enabled in the new rom, so i figured I will try to do it via TWRP however I was unable to boot, since root access is needed to boot from TWRP app + key combo still did not work.
After searching on google, I found a poprgram which can do the trick. (Recovey-Download (CMD)
With this I was able to boot to recovery mode. Now I thought, since all this mess up was started with the new roms, I decided to restore my original stock rom, which I had a back up of. It booted up first and seemed okay, but I was curious if this solved the issues with the key comb, so I tried it going downloading mode, but it only worked with the program ((Recovey-Download (CMD)), and I saw that it is probably not gonna be good, since it only had the blue screen, but no data in the upper left corner.
Then I restarted the device and now it say " Custom binary blocked by FRP lock". and turns off itself.
I saw that FRP lock could be solved easly with Odin fresh install, problem is I have no idea how to go downloading mode. ( Assuming at this point I still can).
Sorry for the long essay but i think the more detail the easier to diagnose. Also, thank you for reading.
I would greatly appreciate any help.
BR
Csaba
Managed to solve it with USB JIG.
Is your phone an Exynos/Snapdragon variant?
csesztes said:
Managed to solve it with USB JIG.
Click to expand...
Click to collapse
Hey, how did you manage to get your phone into dl mode with an USB jig? I want to try this out, but you're the only one here who's confirmed that you were able to do this on an S7 Edge.
Hello all,
I have been a long-time peruser of this site, but this is the first time I couldn't find a good answer to my issue.
My phone (SM-G950F) ran out of power, I didn't notice till after it died completely. When I tried to turn it on while charging it displays the message "Custom binary blocked by FRP lock" on the logo screen, then turns off. If plugged in to a charger, it'll just keep booting like that in a loop. I'm not even able to access recovery, only the download mode. I'm not against factory resetting my phone, however I have important data that in the phone storage I need to keep. I have searched online and youtube with no success.
Any ideas or suggestions will be much appreciated.
NOTE: Before the phone battery died, i wasn't tinkering with any setting that may lead to this; just regular use
flash it with odin
Flash official firmware..but make sure to use HOME_CSC not CSC...to keep your data...then boot direct to download mode after flashing ia done and flash twrp recovery
I have same issue bot Windows dosn't see my phone (drivers installed) so I'm unable to flash it. I can see only unrecognizable device in windows device manager. Is there any hope to fix it. Please help
mic225 said:
Flash official firmware..but make sure to use HOME_CSC not CSC...to keep your data...then boot direct to download mode after flashing ia done and flash twrp recovery
Click to expand...
Click to collapse
How to rid rmm and kg without 7 days?
Hi,
I'm not sure I'm posting in the right section but, I had a really bad experience upgrading to android 10. Really sluggish and slow... so I tried to downgrade to android 9 by using Lenovo's Rescue and Smart Assistant.
What I did, is to find the stock ROM for my model, and replace the files downloaded by the Rescue Assistant (which downloaded the latest firmware). The process went through, but now the device wont power on.
When I plug in the USB, windows makes a sound, the charging light comes on, but The rescue Assistant nor SP flash tool is able to flash the latest firmware.
Is it bricked for good?
Model : TB-XF606F
Hardware number : 60
Maybe your computer doesn't recognize your tablet. Did you ever try using sp flash tool with your tablet before? You can try reinstall or install a driver for your table if you haven't done it yet.
Well the tablet is recognized as the "mtk vcom..." in device manager. I guess it is the driver that the lenovo rescue app installed.
I have never used sp flash tool with my tablet, just the lenovo rescue.
I tried on 2 different pc and it is the same thing. I think the problem is that I can't turn off the tablet properly, even though, all I can see is a black screen.
I will try to drain the battery by keeping the power button pressed with some scotch tape. I don't know what I can do else.
Edit: I tried a few other times with flash tool using different setting for the connection (with battery and full speed) and nothnig happened. But now windows says it does not recognize my tablet.
did the same thing exactly. . bricked lenovo m10 fhd plus x600v after i flashed a downgrade version. dont try to downgrade this thing. i had already flashed it with 3 or 4 versions the same way , but when i chose to flash the oldest version available with the model , this tab got completly unresponsive , no feedback when try to boot into recovery, fastboot, or system . neither does it gets recognised in windows or anything - device manager dowsnt recognise this usb device ( in device manager properties comments it reads- USB\DEVICE_DESCRIPTOR_FAILURE). if you find a way to reflash the device please let us know. good luck .
Bricked mine after being completely running smoothly on Lineage, then was messing around trying to get gapps installed and jacked up the partitions. TWRP said no OS. Kept messing around and mistakenly locked the bootloader again with apparently an unverified boot partition. . I couldn't get SP Flash tool to work ever either. Pretty sure it's a door stop now.
Hello everyone, I have a Nokia 6 TA-1021 that I think is soft bricked as it does not get past the Nokia logo on boot, but it can go in recovery and download modes. My PC correctly recognizes the phone when using fastboot.
I did not unlock the bootloader previously (only used it as a plain user, no custom roms, no root, only OTA updates...). Also, I never turned on the "Allow OEM unlock" flag when the phone was working. I think it was running Android 9 Pie, but I'm not 100% sure, could also be Android 8 Oreo.
I don't know exactly how and when it did get into this situation, because when I changed my phone two years ago it was still working (I even booted it up a couple times last year). Then I wanted to boot it up last week and found this situation.
I've been looking inside the entire Nokia 6 section here to find a possible solution to no luck.
I managed to get a stock firmware to be flashed with OST LA, but as I said, the bootloader is not unlocked and the "Allow OEM unlock" switch is off, so I'm pretty much stuck.
I don't know if this helps, but in recovery mode it displays an error message that reads "E:[libfs_mgr]dt_fstab: Failed to find device for partition system". Also, I tried to do a factory reset a couple times, also to no luck.
Can this phone be unbricked? ANY help will be much appreciated!