Bricked Nokia 6 TA-1021 - Nokia 6 Questions & Answers

Hello everyone, I have a Nokia 6 TA-1021 that I think is soft bricked as it does not get past the Nokia logo on boot, but it can go in recovery and download modes. My PC correctly recognizes the phone when using fastboot.
I did not unlock the bootloader previously (only used it as a plain user, no custom roms, no root, only OTA updates...). Also, I never turned on the "Allow OEM unlock" flag when the phone was working. I think it was running Android 9 Pie, but I'm not 100% sure, could also be Android 8 Oreo.
I don't know exactly how and when it did get into this situation, because when I changed my phone two years ago it was still working (I even booted it up a couple times last year). Then I wanted to boot it up last week and found this situation.
I've been looking inside the entire Nokia 6 section here to find a possible solution to no luck.
I managed to get a stock firmware to be flashed with OST LA, but as I said, the bootloader is not unlocked and the "Allow OEM unlock" switch is off, so I'm pretty much stuck.
I don't know if this helps, but in recovery mode it displays an error message that reads "E:[libfs_mgr]dt_fstab: Failed to find device for partition system". Also, I tried to do a factory reset a couple times, also to no luck.
Can this phone be unbricked? ANY help will be much appreciated!

Related

Yotaphone 2 YD206 in Bootloop after update

Hello,
i have a problem with my 1 week old yotaphone and hope you guys can help me to solve.
Let me say, this is my first android device. After a long time using iphones i saw this 2-displays concept and wanted to give it a try.
But now my problem and the way to:
The phone was brand new and first of all i charged it for a wohle night.
After that i put in the sim-card and started the phone and walked through the start-procedure with WLAN, Googleaccount etc.
Then the phone told me about an update and i started it over WLAN.
The phone was downloading, rebooting and shows me a white window "updating x of 127(?) Apps".
Somewhere in the middel the phone rebooted again and now its in a bootloop.
What is possible with the phone right now.
I can start the phone wit the bootloop (powerred byAndroid, then restart)
I can use "Power + Vol-" to bring it into downloading mode
When i use "Power + Vol+" nothing happend.
When i use "Vol+ + Vol-" nothing happend.
The akku of the phone is empty now and it only works with usb or power unit connected.
In bootloop or downloading mode it is not charging.
What i tried.
What i try:
I read many topics with bricked / bootlooped yotphones and how to flash or cache whipping.
i connected the phone to my pc and used yotoflasher with many different firmwares.
I used fastboot:
- flashed the system.ing with differnet sizes.
- tried different custom recovery.img from different threads here and from other sites.
Even a complete new image, moddified RU img doesn`t help.
The phone stays in bootloop.
Yes, it`s a warranty case, but before i start to strech my nerves by handling with the dealer and shipping
this phone back to china i will try everything else and hope you can help me out of this situation.
Thanks a lot
easyxx said:
Hello,
i have a problem with my 1 week old yotaphone and hope you guys can help me to solve.
Let me say, this is my first android device. After a long time using iphones i saw this 2-displays concept and wanted to give it a try.
But now my problem and the way to:
The phone was brand new and first of all i charged it for a wohle night.
After that i put in the sim-card and started the phone and walked through the start-procedure with WLAN, Googleaccount etc.
Then the phone told me about an update and i started it over WLAN.
The phone was downloading, rebooting and shows me a white window "updating x of 127(?) Apps".
Somewhere in the middel the phone rebooted again and now its in a bootloop.
What is possible with the phone right now.
I can start the phone wit the bootloop (powerred byAndroid, then restart)
I can use "Power + Vol-" to bring it into downloading mode
When i use "Power + Vol+" nothing happend.
When i use "Vol+ + Vol-" nothing happend.
The akku of the phone is empty now and it only works with usb or power unit connected.
In bootloop or downloading mode it is not charging.
What i tried.
What i try:
I read many topics with bricked / bootlooped yotphones and how to flash or cache whipping.
i connected the phone to my pc and used yotoflasher with many different firmwares.
I used fastboot:
- flashed the system.ing with differnet sizes.
- tried different custom recovery.img from different threads here and from other sites.
Even a complete new image, moddified RU img doesn`t help.
The phone stays in bootloop.
Yes, it`s a warranty case, but before i start to strech my nerves by handling with the dealer and shipping
this phone back to china i will try everything else and hope you can help me out of this situation.
Thanks a lot
Click to expand...
Click to collapse
Mine too,stuck in bootloop. I also tried the fastboot and it said waiting device.
kophyo07 said:
Mine too,stuck in bootloop. I also tried the fastboot and it said waiting device.
Click to expand...
Click to collapse
If your phone displays Downloading... and fastboot keeps saying waiting for device then there is something wrong with the installed ADB driver. Check some of the posts in this forum like this one on how to fix this. http://forum.xda-developers.com/yotaphone-one/help/yotaphone-2-yd-206-china-flash-firmware-t3306797/post69311402#post69311402
Strange that you had an OTA (Over The Air update). You didn't do anything between the SIM/Google registration and OTA ?
Normally there are no OTAs allowed on yd206 phones bought from China/HK , where did you buy it ? Chinese retailers have their own firmware that they put on phones , for me , maybe you had bad firmware installed.
The warranty of your phone is voided if you flash yotaphones bought from China and HK .
When you use yotaflasher do you get error message or "waiting for device" ?
To flash the Yotaphone , it should be in developer mode , but you couldn't put it in this mode because it first did the OTA that started your bootloop. Android apps are updated like that ("installing x of 127") when it gets updated to lollipop. Normally the OTA should have worked OK. Did you allow enough time at the Yotaphone logo after the first reboot ? It stays on this logo for 5 minutes before starting. I made this mistake.
The OTA started just after you set up Google etc ?
If so, normal yotaflashing will never work, but at least you havent broken the warranty . The thing we need to know is what exactly happened when you tried to flash , what errors messages appeared ?
If you did not put the phone in developer mode, then you cannot easily flash the phone, so your best possibility is to return the phone. Normally you can contact the seller by chat or email . Some are very good in exchanging.
It IS possible to flash your phone using fastboot, but I would not personally attempt it and you would lose your warranty . You need rootkits, SDK toolkits, universal drivers and images. Google "bootloop without USB debugging".
When I flashed my yd206 , (after many attempts) I flashed my yd206 to yd201 Russian KitKat ROM first and then did an OTA to lollipop.

Having Real Problems!!! Flashing Firmware/Bootloader etc

hello there! well....a couple of things....im usually pretty clued up with flashing etc.....but with the p10 plus.....i am severely struggling....can anyone help
after downloading updates with firmware finder etc..... i have tried flashing with the dload and hwota ways, even tried using DC phoenix and the other DC program (where i spent 15 credits to get bootloader unlock code.....but errors.....
basically, when i first got the phone a week ago, I unlocked bootloader, twrp, and genesis rom, everything is super......and this is where i messed up
:crying::crying: after flashing or trying to flash firmware (it always says failed when you do the three button thing after 5%) as i was going to get a s8........
but now i want to keep the p10 plus, but instead of TWRP, i now have e recovery, but i can still boot into fastboot.......but........
the phone does not boot into the main phone set up......it just gives a screen with red writing, and something about the phone malfunctioned.......
whn i look through lots of posts, it says 'Unlocked Bootloader only' , problems is, now my phone says 'Bootloader : Locked'
Although I used the bootloader unlock tool and got a code before, I cant get my product id again as phone wont boot up, or somehow retrieve my unlock code from earlier, i was silly enough not to jot anything down!!!! am i screwed??????? help!!!!! @Blackball you are the daddy when it comes to p10 plus....can you help?
help!!!!!!!!!!!!!!!!
Did you tried this?
https://forum.xda-developers.com/showthread.php?t=3593108

ADB suicide

Hello developers,
A friend of mine was using a Huawei P10 Lite (WAS-LX1A). After an OTA Update errer, the phone was running quit ****. It was laggy af, Battery was nearly empty after a view hours and much more other bugs. I flashed my Huawei P7 multiple times (30-40 flashes) and my Galaxy SIII with LionageOS was also still working untill hardware crash becouse i dropped the Phone on the street. After installing ADB and Fastboot, i wrote down the Speccs of this phone to get an unlock code from tech support. Bootloader was successfully opend, and now, im lost. Huawei eRecovery show up "Download latest version and recovery". Using this method shows up an error "Unable to recieve Device information" or something like this. it seems i lost my ADB Access, "ADB Devices" seems empty and windows is playing a sound when Plugin/out the phone from USB. Currently im unable to handle this problem, i dont know where the problem is, it seems there is no system/OS running on the device. The phone is booting endless in two screens. The 1st one is the "Your phone can not be trusted" screen wich is the result of unlocked the boot loader. The 2nd screen is Huawei eRecovery what is useless, i only can reboot and shutdown. Recovering doesnt work.
What u also need to know: I lost the unlock code, speccs and other informations abbout this phone so bootloader is unlocked, hopefully this is no major problem.
This of has NO ROOT. Only opend bootloader and a bricked OS. There is no TWRP or other stuff installed!
Hopefully there is a way to install TWRP and a OS or maybe back to stock rom. I dont care wich one if the phone works again.
BlitzlichtHD said:
Hello developers,
A friend of mine was using a Huawei P10 Lite (WAS-LX1A). After an OTA Update errer, the phone was running quit ****. It was laggy af, Battery was nearly empty after a view hours and much more other bugs. I flashed my Huawei P7 multiple times (30-40 flashes) and my Galaxy SIII with LionageOS was also still working untill hardware crash becouse i dropped the Phone on the street. After installing ADB and Fastboot, i wrote down the Speccs of this phone to get an unlock code from tech support. Bootloader was successfully opend, and now, im lost. Huawei eRecovery show up "Download latest version and recovery". Using this method shows up an error "Unable to recieve Device information" or something like this. it seems i lost my ADB Access, "ADB Devices" seems empty and windows is playing a sound when Plugin/out the phone from USB. Currently im unable to handle this problem, i dont know where the problem is, it seems there is no system/OS running on the device. The phone is booting endless in two screens. The 1st one is the "Your phone can not be trusted" screen wich is the result of unlocked the boot loader. The 2nd screen is Huawei eRecovery what is useless, i only can reboot and shutdown. Recovering doesnt work.
What u also need to know: I lost the unlock code, speccs and other informations abbout this phone so bootloader is unlocked, hopefully this is no major problem.
This of has NO ROOT. Only opend bootloader and a bricked OS. There is no TWRP or other stuff installed!
Hopefully there is a way to install TWRP and a OS or maybe back to stock rom. I dont care wich one if the phone works again.
Click to expand...
Click to collapse
https://forum.xda-developers.com/p10-lite/development/service-rom-b362-c432-upgrade-o-o-n-o-t3813946 this method will lock your bootloader...
Ty so much, this solved my problem. phone is nearly new now.

Mi A1 stuck at MI logo page

Alright. just to get this out of the way, I used to do tech support for HTC many moons ago. like back when they were *the* name in originating new tech to smart phones. I worked my ass off to get into the R&D team that handled all the new products that got released and to our product recovery team(the idiots that try to put a good light on a bad decision made by corporate). I have rooted and installed custom ROMS and recovery software on several phones from them as well as since then with the latest being my old galaxy S7 loaded up with TWRP and lineagoe OS(although i do not remember which version now)
But i did not do literally *ANY* of that with my Xiaomi MiA1. the phone functioned how i wanted it to out of the box and with the stock ROM, i had no need or desire to do anything with the ROM.
I have all but completely given up on doing this on my own now. I have gone over every guide on the MI forums for xiaomi and i think i may have even exhausted the ones that are available here now too. I am not sure WTH the problem at this point even is but here is the lowdown:
:fingers-crossed:
got the update near the end of December/beginning of January to update my MI A1 to the new android pie version that just came out OTA(i actually have two of these phones, one i have not updated since the first update to oreo, and this one that is hardbricked from after the PIE update)
At first when i got the OTA update, my phone started to act sluggish. simple apps like messenger, or google drive that had always worked flawlessly suddenly were taking ages to load. So like any sensible person, i pulled my info to my SD card, took it out, and then did a system recovery to restore factory defaults and start with a fresh OS again, just like when windows starts behaving poorly.
only this did not fix the problem. It persisted with poor performance after the factory data reset and upon my next reboot, my phone just stopped loading when it got to the MI logo on the screen. i literally let the phone sit on this screen overnight thinking just maybe it was being slow to boot after the reset. No luck and in the morning it remained at this screen.
just to make a note:
-phone was purchased off of amazon, i have reached out to the seller(it was a business)
-phone is in CANADA, so there are no service centers
-i CANNOT enter recovery mode(pwr + volup + voldn), it just freezes at the mi screen
-i CAN enter fastboot, but cannot flash room
-bootloader is locked and i have not yet found a method that will successfully unlock it
-the miflash tool does not work(on any version what-so-ever)
-the mi unlock tool gets to 50% and then fails, cannot unlock
-i have installed minimal adb for fastboot, none of the related commands succeed(yes system sees the phone:
c:\adb>fastboot devices
91c0963c0804 fastboot)
-i cannot unlock bootloader here and cannot install twrp or any other recovery image and it will not allow it even temporarily
I've gotten desperate enough to have even gone to the extreme and tried EDL mode by using test point to enter, computer recognizes the device even as the qualcom 9008, still no luck with any of the tools or ROMs provided on Xiaomi's website.
So be real with me here ladies and gents.... should i take this thing on my next trip up a telecomm tower and biff it as hard as i can at the ground(obviously in a snowless area for the most satisfaction) or can you saintly people actually offer me some support on this to turn my brick paperweight back into a phone again?
it is also worth mentioning that this is my first post here because i have never before had a problem with following any of he guides on here to accomplish any task i've ever set out to do with an android device, but this beastly lil mother is seriously making me consider becoming an iphone person(not really but do you get the frustration here?)
I'm writing this at 5:30 in the morning after being up all night working on this task so if my info is missing somewhere along the line just poke me with stick and i will fill in the blanks as needed.
I couldn't be bothered to get and load screenshots tonight but i will get some up tomorrow after sleep, for now i am going to the graveyard to rest.
Thanks for any responses in advance here.
What error show miflash when you try to flash in edl mode?
balannaer said:
Alright. just to get this out of the way, I used to do tech support for HTC many moons ago. like back when they were *the* name in originating new tech to smart phones. I worked my ass off to get into the R&D team that handled all the new products that got released and to our product recovery team(the idiots that try to put a good light on a bad decision made by corporate). I have rooted and installed custom ROMS and recovery software on several phones from them as well as since then with the latest being my old galaxy S7 loaded up with TWRP and lineagoe OS(although i do not remember which version now)
But i did not do literally *ANY* of that with my Xiaomi MiA1. the phone functioned how i wanted it to out of the box and with the stock ROM, i had no need or desire to do anything with the ROM.
I have all but completely given up on doing this on my own now. I have gone over every guide on the MI forums for xiaomi and i think i may have even exhausted the ones that are available here now too. I am not sure WTH the problem at this point even is but here is the lowdown:
:fingers-crossed:
got the update near the end of December/beginning of January to update my MI A1 to the new android pie version that just came out OTA(i actually have two of these phones, one i have not updated since the first update to oreo, and this one that is hardbricked from after the PIE update)
At first when i got the OTA update, my phone started to act sluggish. simple apps like messenger, or google drive that had always worked flawlessly suddenly were taking ages to load. So like any sensible person, i pulled my info to my SD card, took it out, and then did a system recovery to restore factory defaults and start with a fresh OS again, just like when windows starts behaving poorly.
only this did not fix the problem. It persisted with poor performance after the factory data reset and upon my next reboot, my phone just stopped loading when it got to the MI logo on the screen. i literally let the phone sit on this screen overnight thinking just maybe it was being slow to boot after the reset. No luck and in the morning it remained at this screen.
just to make a note:
-phone was purchased off of amazon, i have reached out to the seller(it was a business)
-phone is in CANADA, so there are no service centers
-i CANNOT enter recovery mode(pwr + volup + voldn), it just freezes at the mi screen
-i CAN enter fastboot, but cannot flash room
-bootloader is locked and i have not yet found a method that will successfully unlock it
-the miflash tool does not work(on any version what-so-ever)
-the mi unlock tool gets to 50% and then fails, cannot unlock
-i have installed minimal adb for fastboot, none of the related commands succeed(yes system sees the phone:
c:\adb>fastboot devices
91c0963c0804 fastboot)
-i cannot unlock bootloader here and cannot install twrp or any other recovery image and it will not allow it even temporarily
I've gotten desperate enough to have even gone to the extreme and tried EDL mode by using test point to enter, computer recognizes the device even as the qualcom 9008, still no luck with any of the tools or ROMs provided on Xiaomi's website.
So be real with me here ladies and gents.... should i take this thing on my next trip up a telecomm tower and biff it as hard as i can at the ground(obviously in a snowless area for the most satisfaction) or can you saintly people actually offer me some support on this to turn my brick paperweight back into a phone again?
it is also worth mentioning that this is my first post here because i have never before had a problem with following any of he guides on here to accomplish any task i've ever set out to do with an android device, but this beastly lil mother is seriously making me consider becoming an iphone person(not really but do you get the frustration here?)
I'm writing this at 5:30 in the morning after being up all night working on this task so if my info is missing somewhere along the line just poke me with stick and i will fill in the blanks as needed.
I couldn't be bothered to get and load screenshots tonight but i will get some up tomorrow after sleep, for now i am going to the graveyard to rest.
Thanks for any responses in advance here.
Click to expand...
Click to collapse
take your sd card off your phone i had similar issues and fixed them that way
ccalixtro said:
What error show miflash when you try to flash in edl mode?
Click to expand...
Click to collapse
it depends on which version of the flash tool is used. the beta version of the flash tool claims that it is successful, but the phone will not load to the Android OS after that is completed and it still will not load into the recovery mode to attempt to factory reset or anything else.
other versions have given errors:
miflash 2017.7.20.0 gives the response after attempting for about 10 seconds of "ACK count don't match!"
miflash 2018.11.15.0 gives the error response of "cannot receive hello packet"
and as stated before the miflash beta goes through the complete flash process with the result stating a "success" response, but the phone will not load to OS, just remains stuck on the MI logo screen when the phone is booting up
i have some screen grabs of all this but i am not yet worthy through XDA to be permitted to share them
thanks for the reply
kuartito said:
take your sd card off your phone i had similar issues and fixed them that way
Click to expand...
Click to collapse
i dismantled the phone manually bro, when you use EDL mode this way the SIM/SD tray is removed you then remove the entire backplate and then disconnect the battery cable from the circuit board and you use the test point method to short two pins that force the system to start in EDL mode when you connect the usb-C cable, so unfortunately that is not the issue :crying:
it never seems to be the simple solutions
Thanks for the reply!
Still dead in the water on this one.
Going to look into getting a replacement, that is a disappointing end to the Xiaomi experience
Facing similar issue. Am able to flash however still stuck when device is rebooted with this message;
Supported API: 3
E: Failed to clear BCB message: failed to FSync/dev/block/bootdevice/by-name/miscperation not permitted.

[Urgent help] Xiaomi Mi A1 Unlock bootloader

Hi All,
I'm new to this as I'm not an Android developer but a good Android user. Requesting moderator to update anything required.
I've Xiaomi mi A1 and it was working for the last 3 years. Last Sunday, it just got hanged while kids were playing with it(maybe multiple apps/videos/some ad clicked) and it got hanged.
I restarted and it stuck on "Android One" screen till now even after multiple attempts.
What I tried:
1. I tried to wipe/factory reset from the Android recovery option(power off + volume up) then it stuck there saying "Formatting data" and I've restarted it to come back to Android One screen after hours.
2. I tried using MiFlash tool and it continues throwing the error "remote device is locked. cannot erase".
Then I got to know bootloader must be unlocked. and for that:
1. I tried fast boot oem unlock but it just says OK and device reboots. When I check status back, it's again locked .
2.I tried to unlock it using MiFlashUnlock tool but it says not able to find account details as I may have logged in once but probably I may not have used Xiaomi as cloud instead I prefer Google cloud.
You can assume I'v already searched possibly all threads on the internet and added here all possible information.
Attached getvar-all.txt output
Is there anyone on the platform who knows on this issue?
Or it's just a platform of Ads?
oooooof, sounds like a harsh brick from some sort of malware downloaded into the device or your kids diddled with some kernel settings somehow
is your device running on qualcomm snapdragon? i have the fix for it in this site
but first try the update option on the recovery, might fix something
arshad4u said:
Hi All,
I'm new to this as I'm not an Android developer but a good Android user. Requesting moderator to update anything required.
I've Xiaomi mi A1 and it was working for the last 3 years. Last Sunday, it just got hanged while kids were playing with it(maybe multiple apps/videos/some ad clicked) and it got hanged.
I restarted and it stuck on "Android One" screen till now even after multiple attempts.
What I tried:
1. I tried to wipe/factory reset from the Android recovery option(power off + volume up) then it stuck there saying "Formatting data" and I've restarted it to come back to Android One screen after hours.
2. I tried using MiFlash tool and it continues throwing the error "remote device is locked. cannot erase".
Then I got to know bootloader must be unlocked. and for that:
1. I tried fast boot oem unlock but it just says OK and device reboots. When I check status back, it's again locked .
2.I tried to unlock it using MiFlashUnlock tool but it says not able to find account details as I may have logged in once but probably I may not have used Xiaomi as cloud instead I prefer Google cloud.
You can assume I'v already searched possibly all threads on the internet and added here all possible information.
Attached getvar-all.txt output
Click to expand...
Click to collapse
found some fix on a russian website, gonna translate it:
im gonna make a warning there off-script of the russian website, this is NOT guaranteed to work. if it doesnt, send it off for repairs.
what do you need to do this:
1 - fully charge the phone
2 - a working usb cable
3 - a computer with wifi on it (i can tell you have it since you likely posted it on the computer)
4 -you should have Mi flash pro
5 - a recovery image on chinese (WARNING: 1.9 GB, BE PATIENT)
6 - actually working braincells and hands ( you guaranteedly have em)
THE STEPS:
1 - Load in mi flash pro and register in it under your name (not always under your name)
2 - press recovery
3 - you should see a lightning bolt icon along with the IMEI of your device
4 - type in the path of the firmware
even if your device shows your system has been destroyed you can still boot into recovery.
5 - in your device boot into recovery
6 - you see connect with mi assistant? choose that option and confirm it
your device should direct you to connect the usb from your computer to your device
7 - After you setup everything you should see your device, if not, press refresh device, then you should see the flash button, press it
8 - and there begins the magic - wait 5-10 mins for the firmware to initialise, DO NOT DISCONNECT THE USB FROM YOUR DEVICE AT THIS POINT, IF YOU DO, YOU WILL SCREW IT UP AND HAVE TO DO IT ALL OVER AGAIN!
if you dont screw up and your device actually boots congratualtions! the power of xi jing ping has restored your phone to normal with a small drawback - its all in chinese
worry not, it doesnt end here:
9 - Unlock the bootloader AKA Unlock OEM (This is important, because otherwise you will brick yourself again and will have to do it all over again)
10 - boot your device into fast boot and flash the global firmware onto your device (the global firmware can be found on the same xiaomiui website you got the chinese firmware from)
i hope this lengthy guide helps
arshad4u said:
Hi All,
I'm new to this as I'm not an Android developer but a good Android user. Requesting moderator to update anything required.
I've Xiaomi mi A1 and it was working for the last 3 years. Last Sunday, it just got hanged while kids were playing with it(maybe multiple apps/videos/some ad clicked) and it got hanged.
I restarted and it stuck on "Android One" screen till now even after multiple attempts.
What I tried:
1. I tried to wipe/factory reset from the Android recovery option(power off + volume up) then it stuck there saying "Formatting data" and I've restarted it to come back to Android One screen after hours.
2. I tried using MiFlash tool and it continues throwing the error "remote device is locked. cannot erase".
Then I got to know bootloader must be unlocked. and for that:
1. I tried fast boot oem unlock but it just says OK and device reboots. When I check status back, it's again locked .
2.I tried to unlock it using MiFlashUnlock tool but it says not able to find account details as I may have logged in once but probably I may not have used Xiaomi as cloud instead I prefer Google cloud.
You can assume I'v already searched possibly all threads on the internet and added here all possible information.
Attached getvar-all.txt output
Click to expand...
Click to collapse
crud, i forgot the critical part:
it doesnt boot you to the average xiaomi screen, its the A1 model
at this point you need to use the ADB to flash the chinese firmware and unlock the bootloader on the chinese firmware, then flash the global one
though you can still use the same method i typed above
How's the progress so far?
Lamntox said:
oooooof, sounds like a harsh brick from some sort of malware downloaded into the device or your kids diddled with some kernel settings somehow
is your device running on qualcomm snapdragon? i have the fix for it in this site
but first try the update option on the recovery, might fix something
Click to expand...
Click to collapse
I tried recovery also try to format the disc with recovery mode(power on + Volume up ) but then it stuck on the formatting disc... line
arshad4u said:
I tried recovery also try to format the disc with recovery mode(power on + Volume up ) but then it stuck on the formatting disc... line
Click to expand...
Click to collapse
Yup, the device is probs bricked
Have you tried the other methods i described?
arshad4u said:
Hi All,
I'm new to this as I'm not an Android developer but a good Android user. Requesting moderator to update anything required.
I've Xiaomi mi A1 and it was working for the last 3 years. Last Sunday, it just got hanged while kids were playing with it(maybe multiple apps/videos/some ad clicked) and it got hanged.
I restarted and it stuck on "Android One" screen till now even after multiple attempts.
What I tried:
1. I tried to wipe/factory reset from the Android recovery option(power off + volume up) then it stuck there saying "Formatting data" and I've restarted it to come back to Android One screen after hours.
2. I tried using MiFlash tool and it continues throwing the error "remote device is locked. cannot erase".
Then I got to know bootloader must be unlocked. and for that:
1. I tried fast boot oem unlock but it just says OK and device reboots. When I check status back, it's again locked .
2.I tried to unlock it using MiFlashUnlock tool but it says not able to find account details as I may have logged in once but probably I may not have used Xiaomi as cloud instead I prefer Google cloud.
You can assume I'v already searched possibly all threads on the internet and added here all possible information.
Attached getvar-all.txt output
Click to expand...
Click to collapse
Hi i dont have that kind of a problem!
my problem is when i try to do oem unlock it says error 0x1002 and idk what to do (i have same phone btw) i tried anything but nothing works!

Categories

Resources