So i was just watching some videos when i remembered that i had OEM unlocking turned on or off so i thought . Wait! i didnt root my phone properly so if i go back to the previous setting it should be all-right. So I enabled OEM unlocking and i continued watching youtube. Then when i turned it off everything was fine but when i turned it on it shows Custom binary blocked by FRP secure fail:kernel.
So i thought that it just bricked like it had always done.( i have bricked my phone 2 times before.) so i tried loading up Odin and flashing it through my ROM and when i tried to connect my phone to my computer odin didnt pick up the signal of the usb cable my phone and pc were connected to. I tried switching cables tried everything i could find but nothing worked for me so basically.
I enabled/disabled (cant remember) OEM unlocking --> tried to get it back with odin --> odin didnt detect my phone --> tried everything i could find without luck.
Please help me its 19 PM and i have to go to school tommorow my parents are going to kill me. :crying:
MarissRDKS said:
So i was just watching some videos when i remembered that i had OEM unlocking turned on or off so i thought . Wait! i didnt root my phone properly so if i go back to the previous setting it should be all-right. So I enabled OEM unlocking and i continued watching youtube. Then when i turned it off everything was fine but when i turned it on it shows Custom binary blocked by FRP secure fail:kernel.
So i thought that it just bricked like it had always done.( i have bricked my phone 2 times before.) so i tried loading up Odin and flashing it through my ROM and when i tried to connect my phone to my computer odin didnt pick up the signal of the usb cable my phone and pc were connected to. I tried switching cables tried everything i could find but nothing worked for me so basically.
I enabled/disabled (cant remember) OEM unlocking --> tried to get it back with odin --> odin didnt detect my phone --> tried everything i could find without luck.
Please help me its 19 PM and i have to go to school tommorow my parents are going to kill me. :crying:
Click to expand...
Click to collapse
Flash stock rom from updato.com via odin.
enabled OEM unlocking and when turned off my phone it bricked.HELP!!!!
So i was just watching some videos when i remembered that i had OEM unlocking turned on or off so i thought . Wait! i didnt root my phone properly so if i go back to the previous setting it should be all-right. So I enabled OEM unlocking and i continued watching youtube. Then when i turned it off everything was fine but when i turned it on it shows Custom binary blocked by FRP secure fail:kernel.
So i thought that it just bricked like it had always done.( i have bricked my phone 2 times before.) so i tried loading up Odin and flashing it through my ROM and when i tried to connect my phone to my computer odin didnt pick up the signal of the usb cable my phone and pc were connected to. I tried switching cables tried everything i could find but nothing worked for me so basically.
I enabled OEM unlocking --> Shut it down --> showed the error Custom binary blocked by FRP --> tried to flash it with odin --> odin didnt detect my phone --> tried everything i could find without luck.
Please help me its 19 PM and i have to go to school tommorow my parents are going to kill me.
Phone - Samsung Galaxy J5 (SM J500-FN) 2015
MarissRDKS said:
So i was just watching some videos when i remembered that i had OEM unlocking turned on or off so i thought . Wait! i didnt root my phone properly so if i go back to the previous setting it should be all-right. So I enabled OEM unlocking and i continued watching youtube. Then when i turned it off everything was fine but when i turned it on it shows Custom binary blocked by FRP secure fail:kernel.
So i thought that it just bricked like it had always done.( i have bricked my phone 2 times before.) so i tried loading up Odin and flashing it through my ROM and when i tried to connect my phone to my computer odin didnt pick up the signal of the usb cable my phone and pc were connected to. I tried switching cables tried everything i could find but nothing worked for me so basically.
I enabled OEM unlocking --> Shut it down --> showed the error Custom binary blocked by FRP --> tried to flash it with odin --> odin didnt detect my phone --> tried everything i could find without luck.
Please help me its 19 PM and i have to go to school tommorow my parents are going to kill me.
Phone - Samsung Galaxy J5 (SM J500-FN) 2015
Click to expand...
Click to collapse
Hmm, try reinstalling the drivers and reboot the system on your PC
Related
Hello, yesterday installed installed a custom ROM Roma KF 2016 and before the installation does not detect my phone because I wanted to upload Odinie TWRP, but I found that it can have, and, although I had already loaded, I have uploaded the system, then decided to return to the 6.0.1 stock. Odin still does not detect so I decided to turn off the OEM unlock, I thought it might through it. Well, now it is the max lime because he sees it to me on WIN XP as .. Unknown device, 7 and 8.1 do not even hear the sound device is connected, and on the phone FRP Lock and even the recovery can not enter because everything after blocking, I might add that before Odin always seen it, and even how it happened to me that the FRP LOCK blocked my phone, I have uploaded a new and everything was ok. Please help, I'm without a phone. I tried to 4 PC and 3 cables. I have no idea what's going on.
Solved!
somedays ago, i rooted my samsung galaxy grand prime (sm-g531f). which is processed by flash twrp via odin, & then flash supersu via twrp recovery.
after root, i erroneously add google account, so that frp lock was on. and top of that when i go to recovery mode its shown "custom binary blocked by frp".
so, solve this problem (bcoz i already solve this many time on many phone), i go to download mode, and i try to connect my phone via usb cable in pc, but everytime it say "usb device not recognized", but when my phone was switched on (before locked by frp), it also not recognized by usb but it was charging..
so, now:
*i cant switch on my phone
*cant go to recovery mode
*cant connect by usb cable
*i tried on many usb cables
*two laptops
*install/unistall samsung mobile drivers many times
but, nothing wasnt solved my problem..
if anyone also faced this problem, and solved this, please share your valuable process in this thread.. and help me...
Update-1: now i even change my phone's usb connector if anything could happen, but again my bad luck.. nothing happen, means usb not recognized..
Update-2: sorry i was offline or forgot to update my condition. I was tried to fix it via many mobile hardware technichian. And at last, i fixed my problem by change my whole motherboard. Bcoz, the all technichian told me that, it was my phone's cpu which have problem. For that, it couldn't recognize by any pc.
Do u have another samsung phone? If yes then try this connect that phone to your laptop or pc let it be recognised anf when thatd done removed the port from that phone and immediately connect your phone in download mode. This worked for me. If that doesnt work tell me ill look for another solution
waleeds1 said:
Do u have another samsung phone? If yes then try this connect that phone to your laptop or pc let it be recognised anf when thatd done removed the port from that phone and immediately connect your phone in download mode. This worked for me. If that doesnt work tell me ill look for another solution
Click to expand...
Click to collapse
bad luck, its not worked for me...
aamnahid said:
bad luck, its not worked for me...
Click to expand...
Click to collapse
This might be stupid but try it worked for many people. Boot your phone in download mode connect it to your pc open odin and without removing the cable remove the battery of your phone. Your screen wont go off , and if odin recognizes your phone put the battery back. It might not work but still give it a try
waleeds1 said:
This might be stupid but try it worked for many people. Boot your phone in download mode connect it to your pc open odin and without removing the cable remove the battery of your phone. Your screen wont go off , and if odin recognizes your phone put the battery back. It might not work but still give it a try
Click to expand...
Click to collapse
this was also not worked...
I have the same problem and my battery is built in unfortunately any suggestions please
Abdul.82 said:
I have the same problem and my battery is built in unfortunately any suggestions please
Click to expand...
Click to collapse
I'm having this exact problem also. I've downloaded usb drivers for Samsung, i've downloaded kies, ive tried 5 different computers and 4 different cords. No computer even recognizes it (but it does charge) and only one computer says couldn't recognize usb device.
Currently i'm stuck in the google loop of trying to login with an ID that you've previously used on this device and when i enter in the correct info it just keeps looping back to that screen, so i cant even get into the phone to debug or choose MTP connection etc.
The only reason i pulled out the grand prime and started working on it, was i rooted my s6 and s5 and i wanted to keep learning so i pulled out the grand prime and realized its powerful enough to run updated software so it doesn't have to be a paperweight anymore.
Me too I have same problem bro plz help me
FIX for FRP LOCK USB Not Working
The only way to fix that I have gotten to work is to download the stock firmware and Flash using ODIN. I had to try a few different cords but it will eventually work!! Keep trying!! I did the BL the AP the CSC and the CP, went into download mode and ONLY STOCK FIRMWARE works ok!
---------- Post added at 09:51 PM ---------- Previous post was at 09:49 PM ----------
DionWhite33 said:
The only way to fix that I have gotten to work is to download the stock firmware and Flash using ODIN. I had to try a few different cords but it will eventually work!! Keep trying!! I did the BL the AP the CSC and the CP, went into download mode and ONLY STOCK FIRMWARE works ok!
Click to expand...
Click to collapse
it took me a few minutes to figure this out after flashing Root with CF auto didnt work nor did TWRP. So I tried the Samsung Smartswitch and no luck..
hi ,did you find a solution to the frp lock and usb not recognising?
EDIT: Problem solved!!!
I used this tutorial: https://forum.xda-developers.com/sa...very-samsung-sm-a510f-fd-exynos7580-t3314399/ to install TWRP and root my SM-A510FD on 6.0.1 . My device was rooted and working perfectly until stupid me decided to turn off "OEM Unlock" and i restarted my phone and now it says "custom binary blocked by frp lock" The only thing i can do is go to the Download mode. I tried to use Samsung Kies and Smart Switch when in Download mode but they tell me that my device is not supported. But Odin detects my device and says "Added!!". I am currently downloading the stock firmware for my device from Sammobile and i plan to flash it using Odin.
- Will putting the firmware file in the AP section of odin and clicking start work to fix the problem? (I do not care if i will loose data)
- If this will not work is there anything else that i can do? I can't take it to repair because Knox is tripped and i do not have my receipt. If my phone is bricked forever please tell me so i don't waste my time trying to fix it.
Thank you so much in advance! Any help would be extremely appreciated!!
CrystalGTX said:
I used this tutorial: https://forum.xda-developers.com/sa...very-samsung-sm-a510f-fd-exynos7580-t3314399/ to install TWRP and root my SM-A510FD on 6.0.1 . My device was rooted and working perfectly until stupid me decided to turn off "OEM Unlock" and i restarted my phone and now it says "custom binary blocked by frp lock" The only thing i can do is go to the Download mode. I tried to use Samsung Kies and Smart Switch when in Download mode but they tell me that my device is not supported. But Odin detects my device and says "Added!!". I am currently downloading the stock firmware for my device from Sammobile and i plan to flash it using Odin.
- Will putting the firmware file in the AP section of odin and clicking start work to fix the problem? (I do not care if i will loose data)
- If this will not work is there anything else that i can do? I can't take it to repair because Knox is tripped and i do not have my receipt. If my phone is bricked forever please tell me so i don't waste my time trying to fix it.
Thank you so much in advance! Any help would be extremely appreciated!!
Click to expand...
Click to collapse
Just flash stock firmware and you are good to go, if it wont boot turn it off, reboot to recovery(stock) and wipe data & factory reset, later you can again flash twrp and root but dont turn off OEM unlock.
Antonio GT-I8730T said:
Just flash stock firmware and you are good to go, if it wont boot turn it off, reboot to recovery(stock) and wipe data & factory reset, later you can again flash twrp and root but dont turn off OEM unlock.
Click to expand...
Click to collapse
Thank you so much for replying man, i was f*cking panicking! I'm gonna try that when the download finishes. Thanks again! :good:
Antonio GT-I8730T said:
Just flash stock firmware and you are good to go, if it wont boot turn it off, reboot to recovery(stock) and wipe data & factory reset, later you can again flash twrp and root but dont turn off OEM unlock.
Click to expand...
Click to collapse
What about when my j7 says custom binary blocked by frp lock(boot.img) secure fail:kernel. It will boot into recovery, and download. Factory wipe does nothing, so recovery mode is useless to me at the moment. my computer detects the phone enough to say Unknown USB device (Device Descriptor Request Failed) driver error as the label of the phone. No matter what mode I'm in. Drivers are up to date, odins good, usb port, computer, and data cords are all good. I've flashed other phones and hooked this one up to another pc to see that it says the same thing. How do I get the computer and/or odin to agree with my phone enough to pick it up as a good device?
Im having unique issue with my s 7edge.
I cant boot the phone it says Custom binary blocked by frp lock.
I cant access recovery mode it says Recovery is not seandroid enforcing.
I can access download mode but its not connecting to any pc, kies, odin. The download screen says FRP lock: ON, Secure Download: Enabled.
So there is no way to flash the phone or access recovery or boot the phone.
What is the solution, im stuck.?
FYI: I have searched all over the internet for hours but I couldn't found same issue.
Try using Samsung Smartswitch for emergency recovery
more info here
https://forum.xda-developers.com/tm...p/flash-stock-firmware-using-samsung-t3079176
EasyAndroidPro said:
Try using Samsung Smartswitch for emergency recovery
more info here
https://forum.xda-developers.com/tm...p/flash-stock-firmware-using-samsung-t3079176
Click to expand...
Click to collapse
Hi sir,
Thank you for the swift replay. However I went through the guide and tried so much thinks to connect my phone to the smart switch but with no luck.
When I connect the cable the PC is not detecting and and no windows sounds for cable connecting. Tried other phone with same cable and the windows could detect it. Tried on other PC and s7edge is not detected by window also. I tried reinstall the drivers by smart switch and not detecting. I have rebooted my PC without luck also. I have tried all the combinations you can imagine but nothing makes the phone detected by PC.
In my download mode screen in my phone shows the following
ODIN MODE
DOWNLOAD SPEED: FAST
PRODUCT NAME: SM-G935F
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
FRP LOCK: ON
Secured Download: Enabled
WARRANTY VOID: 1 (0x020c)
RP SWREV: B:1 K:0 S:0
There is something in the phone is locked and not allowing to connect to any USB PC.
zevozki said:
Hi sir,
Thank you for the swift replay. However I went through the guide and tried so much thinks to connect my phone to the smart switch but with no luck.
Click to expand...
Click to collapse
i see the real problem is not connecting to pc then...
try:
updating drivers with this : http://developer.samsung.com/technical-doc/view.do?v=T000000117
Try:
manually deleting the drivers all together in windows and then plugging in your S7 while it is in Download Mode
Try:
unplugging all your USB in devices connectd to your pc (apart from keyboard/mouse) and then trying again
Try:
Using a different Cable (preferably the original one that came with the phone, this is the most common cause)
i see the real problem is not connecting to pc then...
try:
updating drivers with this : http://developer.samsung.com/technical-doc/view.do?v=T000000117
Click to expand...
Click to collapse
I tried that not detecting s7
Try:
manually deleting the drivers all together in windows and then plugging in your S7 while it is in Download Mode
Click to expand...
Click to collapse
I tried that not detecting the s7, all other USB devices detected
Try:
unplugging all your USB in devices connectd to your pc (apart from keyboard/mouse) and then trying again
Click to expand...
Click to collapse
I tried that, and not detecting s7
Try:
Using a different Cable (preferably the original one that came with the phone, this is the most common cause)
Click to expand...
Click to collapse
I tried with all cables including the original not detecting s7.
Generally there is no issue with PC to connect to mobile phones it connect perfectly with my other phones. Even the yesterday s7 was connected to my PC until I triggered the security and the phone stuck in the boot screen. The issue is in the s7 when its locked by (FRP Lock because of custom binary) its not allowing to connect to any PC. Something related to the phone security here.
zevozki said:
I tried that not detecting s7
I tried that not detecting the s7, all other USB devices detected
I tried that, and not detecting s7
I tried with all cables including the original not detecting s7.
Generally there is no issue with PC to connect to mobile phones it connect perfectly with my other phones. Even the yesterday s7 was connected to my PC until I triggered the security and the phone stuck in the boot screen. The issue is in the s7 when its locked by (FRP Lock because of custom binary) its not allowing to connect to any PC. Something related to the phone security here.
Click to expand...
Click to collapse
When you are trying to use samsung switch emergency recovery feature, it is a stand alone part of the program which does not require you to connect to smart switch.
It should see the phone and fix the problem. FRP happened to me and smart switch emergency recovery was able to fix it. As long as the phone can be accessed it can be fixed.
All you need is the model name and your serial number which should be posted on the back of your phone or maybe the box you have still have it.
Cosmic Blue said:
When you are trying to use samsung switch emergency recovery feature, it is a stand alone part of the program which does not require you to connect to smart switch.
It should see the phone and fix the problem. FRP happened to me and smart switch emergency recovery was able to fix it. As long as the phone can be accessed it can be fixed.
All you need is the model name and your serial number which should be posted on the back of your phone or maybe the box you have still have it.
Click to expand...
Click to collapse
I have gone through that path, the phone cable unplugged initially. Then I selected more>emergency software recovery and initialization>
two tabs are there, 1- Emergency software recovery, 2- Device initialization.
1- Emergency software recovery: there is no update failed in the list, also I dont have recovery code for the same. no use of this option
2- Device initialization: I have entered the model and SN correctly and it found the stock software, I selected OK for the warning dialog until it reached the stage asking to put the s7 in the download mode, I did that with phone plugged in by USB. I waited forever for the "OK" button to be active, its grayed out because the s7 is not detected at all. So I am in the same loop again, the phone locking all the USB connections.
screenshot of smart switch
http://imgur.com/a/jUj7q
zevozki said:
I have gone through that path, the phone cable unplugged initially. Then I selected more>emergency software recovery and initialization>
two tabs are there, 1- Emergency software recovery, 2- Device initialization.
1- Emergency software recovery: there is no update failed in the list, also I dont have recovery code for the same. no use of this option
2- Device initialization: I have entered the model and SN correctly and it found the stock software, I selected OK for the warning dialog until it reached the stage asking to put the s7 in the download mode, I did that with phone plugged in by USB. I waited forever for the "OK" button to be active, its grayed out because the s7 is not detected at all. So I am in the same loop again, the phone locking all the USB connections.
screenshot of smart switch
http://imgur.com/a/jUj7q
Click to expand...
Click to collapse
leave the phone with the screen showing the FRP lock, plug the cable in and use smart switch device initialization.
It should start without asking you to put it in without going to download mode. If it asks that, just unplug and replug the usb to the phone, that usually lets smart switch to bypass that request.
Cosmic Blue said:
leave the phone with the screen showing the FRP lock, plug the cable in and use smart switch device initialization.
It should start without asking you to put it in without going to download mode. If it asks that, just unplug and replug the usb to the phone, that usually lets smart switch to bypass that request.
Click to expand...
Click to collapse
here is something odd and not as all people see it, when I turn the phone power on it start with samsung welcome screen with red sentence in top "Custom binary blocked by FRP Lock" the screen stays on for 5 seconds then the phone goes off.
If I do the same thing with USB cable plugged in with phone off, its automatically power on with charging screen with red sentence on top "Custom binary blocked by FRP Lock" and then the phone goes off and restart the same thing in infinity loop. So when I tried what you said in smart switch to install the firmware it didnt do anything, no installation started, no bypass FRP, the phone still looping on off, OK button grey.
I am reaching to no clue after all your guidance and help. I think the USB port is damaged and not reading data, only charging.
zevozki said:
here is something odd and not as all people see it, when I turn the phone power on it start with samsung welcome screen with red sentence in top "Custom binary blocked by FRP Lock" the screen stays on for 5 seconds then the phone goes off.
If I do the same thing with USB cable plugged in with phone off, its automatically power on with charging screen with red sentence on top "Custom binary blocked by FRP Lock" and then the phone goes off and restart the same thing in infinity loop. So when I tried what you said in smart switch to install the firmware it didnt do anything, no installation started, no bypass FRP, the phone still looping on off, OK button grey.
I am reaching to no clue after all your guidance and help. I think the USB port is damaged and not reading data, only charging.
Click to expand...
Click to collapse
Can you tell me the resolution of this problem in your case? I have the same problem, although I haven't gotten word back from the seller who may or may not have the serial number, so I haven't been able to even try Smart Switch at all.
Dave Kelsen
Dave Kelsen said:
Can you tell me the resolution of this problem in your case? I have the same problem, although I haven't gotten word back from the seller who may or may not have the serial number, so I haven't been able to even try Smart Switch at all.
Dave Kelsen
Click to expand...
Click to collapse
I had taken it to shop and replaced the whole motherboard in my case. That fixed my problem, yours better luck than me you only need serial number.
zevozki said:
I had taken it to shop and replaced the whole motherboard in my case. That fixed my problem, yours better luck than me you only need serial number.
Click to expand...
Click to collapse
I was able to use Odin to reset my phone, after downloading the correct firmware from SamMobile. It took me a very long time to download, as my wireless connection is through my phone, and my household was over 60GB this month.
But I got it done, and have a working S7 Edge again. Sorry that you apparently had a hardware issue, but at least you got it working again.
Dave Kelsen
Hey everyone,
I drove into a big issue with my sister’s phone. The phone is a Samsung Galaxy S5 NEO (SM-G903F). Some days ago, I did root the phone of my sister. Everything was allright and worked afterwards. I just had to unlock the OEM lock in the developer options. Additionally, I flashed a custom recovery from “TWRP”. To that point everything did just worked fine as it should be. Now we come to the issue. My sister accidently hit the OEM lock button. Now she can’t boot the phone anymore as the phone shows the message: "Custom binary blocked by FRP lock". Also, if I try to go into the recovery system the message pops of with: "Custom binary blocked by FRP lock" and "Recovery is not seandroid enforcing"! If I turn on the power button or either go into the recovery, I can see the start samsung boot display for 3 seconds after that the phone shuts down automatically. On top on all of that, the phone generally has an overheating issue as it gets really easy very hot and closes application automatically. Now the only options I thought I have is to go into the download mode and connect the phone via USB to “Odin” to flash a new firmware. Easy as it is I started “Odin” on the pc went into the download mode, plugged the USB cable into the pc and waited for the "added" message. Unfortunately, nothing popped up. Therefore, I tried all different cables (Original Samsung, Multi-USB and cables from other phones) on the pc but still no "added" message. After that I tried 3 different PC's even a MAC, I tried all cables on all PC's but it didn't worked. Also I tried it on diffrent USB-Ports. I checked the Device-Manager and also there couldn't find the phone anywhere. I installed “Kies”, tried to somehow connect the phone and installed new drivers. Really nothing worked... I am just not sure if the USB-Debugging button was checked or activated in the developer options or not. Anyway, I guess it shouldn't matter as it should connect in download mode the phone via usb. I really do hope someone is out there who can help me or might has a good tip/advice for me except something like: "You tried already everything", "There is nothing you can do" or " You can throw your phone away".
Thanks in advance.
Kind regards,
Cossack007
Cossack007 said:
Hey everyone,
I drove into a big issue with my sister’s phone. The phone is a Samsung Galaxy S5 NEO (SM-G903F). Some days ago, I did root the phone of my sister. Everything was allright and worked afterwards. I just had to unlock the OEM lock in the developer options. Additionally, I flashed a custom recovery from “TWRP”. To that point everything did just worked fine as it should be. Now we come to the issue. My sister accidently hit the OEM lock button. Now she can’t boot the phone anymore as the phone shows the message: "Custom binary blocked by FRP lock". Also, if I try to go into the recovery system the message pops of with: "Custom binary blocked by FRP lock" and "Recovery is not seandroid enforcing"! If I turn on the power button or either go into the recovery, I can see the start samsung boot display for 3 seconds after that the phone shuts down automatically. On top on all of that, the phone generally has an overheating issue as it gets really easy very hot and closes application automatically. Now the only options I thought I have is to go into the download mode and connect the phone via USB to “Odin” to flash a new firmware. Easy as it is I started “Odin” on the pc went into the download mode, plugged the USB cable into the pc and waited for the "added" message. Unfortunately, nothing popped up. Therefore, I tried all different cables (Original Samsung, Multi-USB and cables from other phones) on the pc but still no "added" message. After that I tried 3 different PC's even a MAC, I tried all cables on all PC's but it didn't worked. Also I tried it on diffrent USB-Ports. I checked the Device-Manager and also there couldn't find the phone anywhere. I installed “Kies”, tried to somehow connect the phone and installed new drivers. Really nothing worked... I am just not sure if the USB-Debugging button was checked or activated in the developer options or not. Anyway, I guess it shouldn't matter as it should connect in download mode the phone via usb. I really do hope someone is out there who can help me or might has a good tip/advice for me except something like: "You tried already everything", "There is nothing you can do" or " You can throw your phone away".
Thanks in advance.
Kind regards,
Cossack007
Click to expand...
Click to collapse
hey!
don't panic try thisfirst update the samsung usb drivers. then try to restore the phone with the original samsung smart switch software (grab it here)