Has there been anyone else experiencing an issue with the wireless charger since the last security update.
Now instead of charging the phone like it did before, it just holds it at the level it is at.
Anyone know why this is happening now, and how to fix so it charges?
Thanks.
You have gone to the menu item fast wireless charging?
Same Issue
kwrose14 said:
Has there been anyone else experiencing an issue with the wireless charger since the last security update.
Now instead of charging the phone like it did before, it just holds it at the level it is at.
Anyone know why this is happening now, and how to fix so it charges?
Thanks.
Click to expand...
Click to collapse
Any Updates?
Hey, do the downgrade to PE1 with full wip, and put 100%, your working fast charging. Good luck. To me it helped.
I'm on PH7 and wireless charging works fine for me.
Wireless charging has never been an issue for me with any update. Might be purely coincidental, but you can also try a factory reset incase a setting or system file got skewed.
Have you checked the charger with another phone, or another charger with your Edge. It's possible the charger coincidentally failed at the same time.
My USB fast charging doesn't work. Wireless charging works faster than USB with different fast chargers. I have tried 6 of them and still not getting fast USB charging anymore. It is checked to fast charge also. All happened after the PJ3 update.,
Have you tried different cables, too? If the original charger and cable don't fast charge your phone, it's probably time for warranty service.
Related
Last night I charged my phone with the standard charging cable and the phone said it was charging. This morning I woke up and it had not charged at all. It still says it is charging but no power is going to the device. Any thoughts on how to fix this? Thanks!
Edit: Wireless charging is also not working.
I would try to charge the phone with another micro-usb cable without changing the stock 1.8Amps charger. It's very common for those cables to get damaged after some time of usage and not deliver enough current for the phone to charge.
That did not seem to do anything. The fact that wireless charging also isn't working has me worried.
Has anyone had any issues with charging their Galaxy S7 with the new update? When I plug mine in it freaks out and says it's charging, not charging then charging again. It eventually stops. But seems to be a bug. Wasn't an issue before the update. I've tried other chargers and tried different outlets.
No issue on my side
---------- Post added at 04:58 AM ---------- Previous post was at 04:58 AM ----------
I must say that the fast charging does take longer then on MM
No issues here either
Yesterday mine was 'fast charging' & I could watch it draining. Cord & fast wireless both. Different cables & chargers.
I cleared the cache & it has been fine ever since.
Might give that a try.
nelsonalexander said:
Has anyone had any issues with charging their Galaxy S7 with the new update? When I plug mine in it freaks out and says it's charging, not charging then charging again. It eventually stops. But seems to be a bug. Wasn't an issue before the update. I've tried other chargers and tried different outlets.
Click to expand...
Click to collapse
I have same issue on mine since OTA update last night mine is fine if i put it on the wireless charging pad.
Is this the official 7.0 release or the vzw flash
I used the official OTA release on 3 network UK
I have the same exact issue. It seems to be isolated to fast charging. When I have fast charging disabled or charge through a computer, the phone charges fine. I was able to get fast charging to work with the original white charger my phone came with. I have secondary black chargers that are the exact same model as the white charger that don't work. Really weird. Trying to avoid a factory reset but it may come down to that...
Update: I found that disabling fast charge fixes the intermittent charging issue. I'd rather have my phone charge slowly than not at all, I guess. Hopefully a patch comes out soon that fixes the issue.
Hi,
My moto x pure started charging really slow out of nowhere
Yesterday when i connected it to the turbo charger the message (turbo power connected) didnt showed up so i thought it had something to do with the cable, i changed it to another but the message still wasnt showing. I also tried with my power bank with turbo charger and it wont show up either.
I can live without the turbo charger, but not with how slow it is charging, in the Ampere app it show that is charging at 400 ma.
Is there something i can do? I already wiped the cache and depleted the battery but the problem is still there. At home i will do a factory reset, but i dont have a lot of faith in it.
Also i havent rooted or unlocked the bootloader, it has android 6.0
The end on your turbo charger cord is worn out most likely.
Its not that, i tried with 3 different cables that i knew already work with turboCharger and still wont charge at a normal speed.
I cleaned the phone usb port but didnt do anything, now i want to try with some isopropyl to see if i can clean them.
Anyone got an idea what could be? I already did a factory reset.
Patopa said:
Its not that, i tried with 3 different cables that i knew already work with turboCharger and still wont charge at a normal speed.
I cleaned the phone usb port but didnt do anything, now i want to try with some isopropyl to see if i can clean them.
Anyone got an idea what could be? I already did a factory reset.
Click to expand...
Click to collapse
The possibilities are pretty limited... list them in order of difficulty to test:
USB Cord
Turbocharger AC adapter
USB port in phone
Battery
Honestly, I would lean towards 1 or 2, the turbo charger that comes with these devices has been known to be of... umm... less than exceptional quality. Otherwise, it is not unheard of for the USB port in the phone to go bad, and the battery is likely pushing 2 years old.
Patopa said:
Its not that, i tried with 3 different cables that i knew already work with turboCharger and still wont charge at a normal speed.
I cleaned the phone usb port but didnt do anything, now i want to try with some isopropyl to see if i can clean them.
Anyone got an idea what could be? I already did a factory reset.
Click to expand...
Click to collapse
Moto Turbo Chargers are low quality, mine stopped working 2 months in. So I got a 3rd party quick charger. No problems since.
i have battery charging issues as well!!
Shows as USB charger Turbo charger not working even don't show as AC mode! Basically just don't charge only with PC and USB cable! It's original turbocharger and USB connector is fine because it's working fine with PC!
I already have done 3 factory reset from menu and from recovery menu but no success sadly it's very odd issue! Basically every wall charger appear like "USB Charger" no AC or Turbocharger! But connector is fine because it's working fine with PC!
Nothing appears! Only shows charging next to clock but only about 20-30 second After that doesn't show any charging! But very slowly charging 6-7 hours to full.Maybe it's just a coincidence but 2 days after 7.0 update this issue started! I think that connector is fine because with PC it's working fine and transfer files or charging fine
Same happening here just 2 days ago, anyone find a solution?
I had this same problem from today. Today morning turbocharged by my friend's Moto turbocharger. Today evening I use my 2different turbocharger it's not charge quick and very slow charging...
Same here..stock, never unlocked. On latest updates. XT1575 A0.52
Accubattery shows its getting 247mA from a Samsiung Adaptive charger (which always showed up before as a turbo charger, and does fast charge samsung phones.)
Hello everyone,
After a long discussion with Samsung and absolutely no help I have ended up here. I recently updated my firmware on my Galaxy S8 Unlocked SM- G950U(Sprint Network) to the latest build G950USQU2CRC5. After this update I can no longer charge my phone and have fast charging. This is with original cable and charger as well as other cables and QC 3.0 compatible charger. Interesting enough when I plug into my QC 3.0 power brick it tells me that the phone is pulling 5v 1.5amps (7.5w) when it normally says 9v 2amps (18w). Also, only my QC 3.0 compatible car charger will make it fast charge . WTF is going on? I have already gone through settings, soft reset and also cleared cache. Nothing seems to fix this problem. I also get (Slow Charging ) notification at times. Does anyone know a workaround or a fix? Is anyone else experiencing this same issue? I have called and alerted Samsung of this issue. Please help if you can.
ait1071 said:
Hello everyone,
After a long discussion with Samsung and absolutely no help I have ended up here. I recently updated my firmware on my Galaxy S8 Unlocked SM- G950U(Sprint Network) to the latest build G950USQU2CRC5. After this update I can no longer charge my phone and have fast charging. This is with original cable and charger as well as other cables and QC 3.0 compatible charger. Interesting enough when I plug into my QC 3.0 power brick it tells me that the phone is pulling 5v 1.5amps (7.5w) when it normally says 9v 2amps (18w). Also, only my QC 3.0 compatible car charger will make it fast charge . WTF is going on? I have already gone through settings, soft reset and also cleared cache. Nothing seems to fix this problem. I also get (Slow Charging ) notification at times. Does anyone know a workaround or a fix? Is anyone else experiencing this same issue? I have called and alerted Samsung of this issue. Please help if you can.
Click to expand...
Click to collapse
I seem to be having the same issues won't charge at all with the Samsung fast charger but it will charge in the car and my USB outlet and a Chromecast charger. Updated this morning to the latest firmware, also unlocked gs8
Sent from my SM-G950U1 using Tapatalk
Okay so what I have found out is even with the cable and a few setting changes it will occasionally say it is fast charging however it never pulls more than 5v which defeats the purpose of quick charge.
Disgusted...
Same here; disgusted with the entire issue... Pay good money, longtime loyal customer, trust now eroded... Even went through reformatting the phone, did not help; waste of time... Thinking of switching to iPhone...
It's the cable and/or power brick. Also we're still on march secuirity, Sammy ain't that fast.
I have the same problem, when I upgraded from android 7 to 9, I lost the fast charge, I'm trying to find a solution.
the usb port says it is wet.
when the cell phone is turned off it is constantly informing that it is wet and the phone is trembling.
when it is on, it charges, however in a normal way, without the fast charge
solved.
i am using this kernel https://forum.xda-developers.com/ga...velopment/kernel-a2n-kernel-20181205-t3875640
i get back my fast chargin
Had the phone for a couple of days and just noticed wireless charging doesn't work. Standard QI charger that works with other phones. Tried with battery share both on and off. I installed the newest update when I got the phone and reset straight away to start fresh. Also tried rebooting now. Still doesn't work.
Any ideas?
I find mine very picky about charging wirelessly. It improved after the last update but it still requires careful alignment and doesn't work with every wireless charger I have, ir particularly doesn't like the wireless charging in the car.