Air Gestures not working - Galaxy S 4 Q&A, Help & Troubleshooting

Hey everyone! I am having a big problem. Previously, my air gestures used to work perfectly but now they are not. I've even enabled Quick Glance, air browse etc under settimgs but still I can't use air gestures! :'(
I've tried rebooting too. Is there any fix except for factory reset or flashing firmware?
My device is gti9500 with android lollipop stock rom.

I would suggest downloading sensor test from the play store and checking if the proximity sensor works as intended.

GDReaper said:
I would suggest downloading sensor test from the play store and checking if the proximity sensor works as intended.
Click to expand...
Click to collapse
Yep. Proximity sensor is working fine.

munimjaffer said:
Yep. Proximity sensor is working fine.
Click to expand...
Click to collapse
Yeah, but the proximity sensor and air gesture sensors are separate. If one works it doesn't mean the other one works.

GDReaper said:
Yeah, but the proximity sensor and air gesture sensors are separate. If one works it doesn't mean the other one works.
Click to expand...
Click to collapse
I did as you said. Downloaded app to check proximity sensor and that was working fine, now what's the fix?

munimjaffer said:
I did as you said. Downloaded app to check proximity sensor and that was working fine, now what's the fix?
Click to expand...
Click to collapse
Did you read what I said?
The air gesture sensor has nothing to do with the proximity sensor. They are 2 different sensors.
If you want to fix it, re-flash the stock ROM. If that doesn't work, you might have to tear the phone apart and clean the sensor.

GDReaper said:
Did you read what I said?
The air gesture sensor has nothing to do with the proximity sensor. They are 2 different sensors.
If you want to fix it, re-flash the stock ROM. If that doesn't work, you might have to tear the phone apart and clean the sensor.
Click to expand...
Click to collapse
Ok

@GDReaper , I've detected the problem. It is hardware related. The problem is that from the top(where there is Samsung logo) the screen is slightly raised upwards. When I press the screen tightly inwards and then try to air browse, it works fine. Is there any way I could bring screen back to its position?
Sorry for little bit of bad English.

munimjaffer said:
@GDReaper , I've detected the problem. It is hardware related. The problem is that from the top(where there is Samsung logo) the screen is slightly raised upwards. When I press the screen tightly inwards and then try to air browse, it works fine. Is there any way I could bring screen back to its position?
Sorry for little bit of bad English.
Click to expand...
Click to collapse
Try using a blow dryer to heat up the screen and then put something fairly heavy on the screen to keep it pressed down.
Hopefully the glue should become liquid from heating and harden again with cooling. Otherwise you might have to change the glass.

GDReaper said:
Try using a blow dryer to heat up the screen and then put something fairly heavy on the screen to keep it pressed down.
Hopefully the glue should become liquid from heating and harden again with cooling. Otherwise you might have to change the glass.
Click to expand...
Click to collapse
Ohh ok bro

Related

Problem with proximity sensor

I got a problem with the proximity sensor.
It often doesn´t do anything.. but sometimes it shuts off the display but does not wake it up when the HD2 is away from my head or (when i´m testing it) i put the finger off the sensor.
Today i experienced 2 times a little creak noise? (dont know the correct word in english) when the sensor should begin to work.. and the display didnt get dark!
I´m a bit worried about it.. anyone experienced the same thing?
Search ..
i did.. it´s a common problem i guess but never read that there is this "creak" noise.. sounds like a short circuit!
got similar prob when i had HDtweak installed. uninstall fixed it...
waxfresh said:
i did.. it´s a common problem i guess but never read that there is this "creak" noise.. sounds like a short circuit!
Click to expand...
Click to collapse
Are you pressing where the sensor is or does it make this noise simply by covering it up?
by covering up.. thats why im worried
waxfresh said:
by covering up.. thats why im worried
Click to expand...
Click to collapse
I'd get that looked at then. It definitely shouldn't make a noise when it's covered up.
Hi,
there is lots of post about trouble with proximity sensor...
here is mine :
http://forum.xda-developers.com/showthread.php?t=607956
I think the scratch sound is an other trouble, and no link with the proximity sensor.
the only way i found (after 3 change of phone) is SmartLock cab.
Try it.
I know there is something in the registry to disable the proximity sensor.
secable said:
Hi,
there is lots of post about trouble with proximity sensor...
here is mine :
http://forum.xda-developers.com/showthread.php?t=607956
I think the scratch sound is an other trouble, and no link with the proximity sensor.
the only way i found (after 3 change of phone) is SmartLock cab.
Try it.
I know there is something in the registry to disable the proximity sensor.
Click to expand...
Click to collapse
I have the same problem, thare is two holes on the screen who is the proximity sensor, I think the left one is working with light, when you take a flash light while you on call the screen will go off when you put light on the sensor, but I think on the left one. the right hole does not work.
thake the screen protector out or cut it and the proximity sensor will work perfect.
kochavy

[Q] Disabling magnetic proximity 'S View' sensor

Hi,
Just wondering if anybody knows if there are any ROMs available which allow you to disable the magnetic proximity sensor, just below the volume down rocker on the S4?
I work in an aluminium smelter and in production areas, the magnetic fields are very high due to the high DC current (240kA) used in the smelting process. What this means is that my S4 is unusable as the magnetic field holds the 'S View' sensor in its closed position as though an S case is closed. i.e. the phone only displays 'S View' mode rendering it useless in production areas.
Thanks
Paul
relli10 said:
Hi,
Just wondering if anybody knows if there are any ROMs available which allow you to disable the magnetic proximity sensor, just below the volume down rocker on the S4?
I work in an aluminium smelter and in production areas, the magnetic fields are very high due to the high DC current (240kA) used in the smelting process. What this means is that my S4 is unusable as the magnetic field holds the 'S View' sensor in its closed position as though an S case is closed. i.e. the phone only displays 'S View' mode rendering it useless in production areas.
Thanks
Paul
Click to expand...
Click to collapse
You can turn this off in settings>My Device>Accessory>S View Cover Automatic Unlock
yabanize said:
You can turn this off in settings>My Device>Accessory>S View Cover Automatic Unlock
Click to expand...
Click to collapse
I've tried this, but it doesn't disable the S View mode. Try yourself with a fridge magnet.
Use Elixir from the Play Store.
The S View cover does not use magnetic sensor. It uses proximity sensor.
| Mobile Message
Dr.Engineer said:
The S View cover does not use magnetic sensor. It uses proximity sensor.
| Mobile Message
Click to expand...
Click to collapse
You are wrong. It uses magnetic sensor only.
danum said:
Use Elixir from the Play Store.
Click to expand...
Click to collapse
cool_sid007 said:
You are wrong. It uses magnetic sensor only.
Click to expand...
Click to collapse
Did elixir work?
I to am trying to get that magnet disabled.
At work so I can't try elixir.
There are actually 2magnets.
One by the volume and the other is by the sensors above the screen.
Thanks.
dtr145r said:
Did elixir work?
I to am trying to get that magnet disabled.
At work so I can't try elixir.
There are actually 2magnets.
One by the volume and the other is by the sensors above the screen.
Thanks.
Click to expand...
Click to collapse
If you're willing to install Xposed I can make a quick module to disable S-View. However some apps like the phone app might still respond to it as they handle it themselves rather than using the framework. That shouldn't be too annoying though.
Edit: btw this is better suited as a kernel patch to disable the sensor rather than the S-View screen. That might slightly lower consumption and would work better, but for warranty reasons I can see why a kernel patch would be annoying.
Sent from my GT-I9500 using xda app-developers app
MohammadAG said:
If you're willing to install Xposed I can make a quick module to disable S-View. However some apps like the phone app might still respond to it as they handle it themselves rather than using the framework. That shouldn't be too annoying though.
Edit: btw this is better suited as a kernel patch to disable the sensor rather than the S-View screen. That might slightly lower consumption and would work better, but for warranty reasons I can see why a kernel patch would be annoying.
Sent from my GT-I9500 using xda app-developers app
Click to expand...
Click to collapse
Sure I 'll try it out let me know what you need
Sent from my SPH-L720 using XDA Premium 4 mobile app
Can I ask the opposite question lol!
Is there a way to turn a standard wallet case in to an S-View by installing a magnet somewhere on the flap or something? Is it possible to make it work?
Aitch said:
Can I ask the opposite question lol!
Is there a way to turn a standard wallet case in to an S-View by installing a magnet somewhere on the flap or something? Is it possible to make it work?
Click to expand...
Click to collapse
Yes. Get a hold of a magnet, it has to be reasonabley strong, I found that a fridge magnet was not strong enough, and hold it close to the volume down button and move it about a bit and find the optimum position, I actually find the magnet flat against the back or front near vol. Down works best, just be careful of screen.
Sent from my GT-I9505 using xda app-developers app
relli10 said:
Hi,
Just wondering if anybody knows if there are any ROMs available which allow you to disable the magnetic proximity sensor, just below the volume down rocker on the S4?
I work in an aluminium smelter and in production areas, the magnetic fields are very high due to the high DC current (240kA) used in the smelting process. What this means is that my S4 is unusable as the magnetic field holds the 'S View' sensor in its closed position as though an S case is closed. i.e. the phone only displays 'S View' mode rendering it useless in production areas.
Thanks
Paul
Click to expand...
Click to collapse
dtr145r said:
Sure I 'll try it out let me know what you need
Sent from my SPH-L720 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Install Xposed from http://forum.xda-developers.com/showthread.php?t=1574401
Install my module http://mohammadag.xceleo.org/public/Android/Xposed/DisableSView.apk
It's as close as you can get without disabling the sensor. I didn't hook into the phone so that might still show the S-View window, but that's no biggie. Also, the Smart Stay icon disappears, but hey, that can be a plus
Please report back if this works for you so I can make a thread for it.
MohammadAG said:
Install Xposed from http://forum.xda-developers.com/showthread.php?t=1574401
Install my module http://mohammadag.xceleo.org/public/Android/Xposed/DisableSView.apk
It's as close as you can get without disabling the sensor. I didn't hook into the phone so that might still show the S-View window, but that's no biggie. Also, the Smart Stay icon disappears, but hey, that can be a plus
Please report back if this works for you so I can make a thread for it.
Click to expand...
Click to collapse
ok.
getting everything installed now.
im a little worried about it working, im on CM so its not going to show the sview window at all.
ill let you know in a few minutes
---------- Post added at 09:13 PM ---------- Previous post was at 09:08 PM ----------
MohammadAG said:
Install Xposed from http://forum.xda-developers.com/showthread.php?t=1574401
Install my module http://mohammadag.xceleo.org/public/Android/Xposed/DisableSView.apk
It's as close as you can get without disabling the sensor. I didn't hook into the phone so that might still show the S-View window, but that's no biggie. Also, the Smart Stay icon disappears, but hey, that can be a plus
Please report back if this works for you so I can make a thread for it.
Click to expand...
Click to collapse
nope its not working.
pm me your email address and ill send you some log cats.
im pretty sure that sensor needs to be disabled. its causing the actual proximity sensor to be disabled which is why its causing me problems.
dtr145r said:
ok.
getting everything installed now.
im a little worried about it working, im on CM so its not going to show the sview window at all.
ill let you know in a few minutes
---------- Post added at 09:13 PM ---------- Previous post was at 09:08 PM ----------
nope its not working.
pm me your email address and ill send you some log cats.
im pretty sure that sensor needs to be disabled. its causing the actual proximity sensor to be disabled which is why its causing me problems.
Click to expand...
Click to collapse
What exactly do you want to do? CM doesn't have S-View so this shouldn't be needed.
Sent from my Samsung Galaxy S4 (i9500)
MohammadAG said:
What exactly do you want to do? CM doesn't have S-View so this shouldn't be needed.
Sent from my Samsung Galaxy S4 (i9500)
Click to expand...
Click to collapse
i bought an s View cover for my phone.
im using cm
i downloaded an app from the play store that mock sview because obviously cm doesnt have it.
the app used to proximity cover to determine if the cover is open or closed.
the app works flawlessly when i use my finger to cover the proximity sensor.
when i use the sview cover it doesnt work.
the sview cover some how disables the proximity sensor. i know this because i have other apps that use the proximity sensor and they dont work either when i use that cover...
dtr145r said:
i bought an s View cover for my phone.
im using cm
i downloaded an app from the play store that mock sview because obviously cm doesnt have it.
the app used to proximity cover to determine if the cover is open or closed.
the app works flawlessly when i use my finger to cover the proximity sensor.
when i use the sview cover it doesnt work.
the sview cover some how disables the proximity sensor. i know this because i have other apps that use the proximity sensor and they dont work either when i use that cover...
Click to expand...
Click to collapse
Oh, then your problem is different from the OP's. I suggest contacting the devs so they monitor the magnet rather than the proximity sensor.
My module simply disables S-View on stock TW ROMs.
Sent from my Samsung Galaxy S4 (i9500)
feedback to the module
MohammadAG said:
Install Xposed from http://forum.xda-developers.com/showthread.php?t=1574401
Install my module http://mohammadag.xceleoc.org/public/Android/Xposed/DisableSView.apk
It's as close as you can get without disabling the sensor. I didn't hook into the phone so that might still show the S-View window, but that's no biggie. Also, the Smart Stay icon disappears, but hey, that can be a plus
Please report back if this works for you so I can make a thread for it.
Click to expand...
Click to collapse
hi! I also have this strong magnetic field work area problem.i found this topic and tried to install your module.Thank you very much because its working.the s-view window has been disabled.But the problem is the touchscreen is still disabled or not functioning.Is there a solution to this?THANKS!!
MohammadAG said:
Install Xposed from http://forum.xda-developers.com/showthread.php?t=1574401
Install my module http://mohammadag.xceleo.org/public/Android/Xposed/DisableSView.apk
It's as close as you can get without disabling the sensor. I didn't hook into the phone so that might still show the S-View window, but that's no biggie. Also, the Smart Stay icon disappears, but hey, that can be a plus
Please report back if this works for you so I can make a thread for it.
Click to expand...
Click to collapse
Thank you so much, this seems to have solved my issue of my S4 always flashing the S View Cover display.
3ddown said:
hi! I also have this strong magnetic field work area problem.i found this topic and tried to install your module.Thank you very much because its working.the s-view window has been disabled.But the problem is the touchscreen is still disabled or not functioning.Is there a solution to this?THANKS!!
Click to expand...
Click to collapse
Hi all !!
Thank you for the great forum!!
I installed the module and the S-view is not shown, but the touch screen is disabled.
I use a magnetic car holder and every time I hang up the phone to it, the S-lock the screen view!
I don't know if it's possible, but it could be a great thing to change the phone's behavior when the magnetic sensor detects a magnetic field, for example, you can choose to put the phone in car mode.
Thank you very much
---------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S4 mini DUOS GT-I9192 - Stock ROM - Android 4.2.2 - I9192UBUAMH2
uzzos77 said:
Hi all !!
Thank you for the great forum!!
I installed the module and the S-view is not shown, but the touch screen is disabled.
I use a magnetic car holder and every time I hang up the phone to it, the S-lock the screen view!
I don't know if it's possible, but it could be a great thing to change the phone's behavior when the magnetic sensor detects a magnetic field, for example, you can choose to put the phone in car mode.
Thank you very much
---------------------------------------------------------------------------------------------------------------------------------
Samsung Galaxy S4 mini DUOS GT-I9192 - Stock ROM - Android 4.2.2 - I9192UBUAMH2
Click to expand...
Click to collapse
You ever figured out anything on this? I got a magnetic car holder too and it's kinda annoying with the S-View popping up.
It render S-Voice Drive useless.

[Q] How to disable Proximity sensor in Nexus 4

So i recently upgraded to Lollipop but my proximity sensor is broken. I used an app called Proximity Screen off lite but it is not working on latest android lollipop. So now when i make a call my screen goes dark until the call is disconnected from other party. same is the case with incoming call. Please help
I was in the same situation as you last weekend. Unfortunately, there's no way to get around it in software that I know of. I even went as far as developing an app from scratch to duplicate Proximity Screen Off Lite's functionality, but ended up hitting a road block on the OS level. Another option that would've worked pre-5.0 was to use an xposed mod to disable the proximity sensor, but of course that doesn't work in 5.0 now. Hopefully someone else can chime in with a software solution that I couldn't figure out.
Did you replace your phone's screen by any chance?
Shimakaze said:
I was in the same situation as you last weekend. Unfortunately, there's no way to get around it in software that I know of. I even went as far as developing an app from scratch to duplicate Proximity Screen Off Lite's functionality, but ended up hitting a road block on the OS level. Another option that would've worked pre-5.0 was to use an xposed mod to disable the proximity sensor, but of course that doesn't work in 5.0 now. Hopefully someone else can chime in with a software solution that I couldn't figure out.
Did you replace your phone's screen by any chance?
Click to expand...
Click to collapse
Yes i did :/ nownfed up and hating it. there has to be someway which disable the hardware :/
sink1991 said:
Yes i did :/ nownfed up and hating it. there has to be someway which disable the hardware :/
Click to expand...
Click to collapse
I replaced the original screen with an after-market one as well, and that's what caused my proximity sensor issue. There is a good chance your proximity sensor is actually working perfectly, but the after-market screen is blocking it from reading a "far" value. If you're comfortable with taking your phone apart, you could fix it without replacing anything. There were two things that I did to fix mine, but I'm not sure which of the two actually did the trick. 1) I repositioned the sensor so that it sits further away from the glass, and 2) I scratched off the black paint on the back side of the glass around the two clear sensor holes. Obviously you should attempt option 1 first, because the second option is permanent and will damage the aesthetics of your phone. Others have reported success with option 1, by gluing a thin spacer with two holes to the front of the sensor, but I did not have any luck with it when I tried initially. You will find that it helps a lot to do this while the phone is on, and you can see the results of your changes immediately with the Proximity Sensor Finder app.
Edit: Before you attempt any of the fixes, you should verify that your sensor is in fact working by pointing it away from the phone after opening up the back.
I had the same problem, I gave up on a software fix and I ended up taking the phone apart and fixing it outright. It's not too difficult, all you need is a plastic tool to open the case and a T5 and a 00 screwdriver.
There's a good youtube video (I can't link - see /watch?v=AZDAIgwbXk4) showing how to do it. Skip the battery section, you can keep that in place. At 9:00 he indicates where the proximity sensor and light sensor are. Take the small rubber gasket that covers the two sensors, and flip it around so that the larger hole is over the proximity sensor. Put it back together and turn it on, it should work perfectly.
Also, in the interim, you may wish to have your phone end calls with the power button, it can be found under accessibility settings. At least that way you won't be stuck waiting for the other party to pick up or hang up.
Admiral Nelson said:
I had the same problem, I gave up on a software fix and I ended up taking the phone apart and fixing it outright. It's not too difficult, all you need is a plastic tool to open the case and a T5 and a 00 screwdriver.
There's a good youtube video (I can't link - see /watch?v=AZDAIgwbXk4) showing how to do it. Skip the battery section, you can keep that in place. At 9:00 he indicates where the proximity sensor and light sensor are. Take the small rubber gasket that covers the two sensors, and flip it around so that the larger hole is over the proximity sensor. Put it back together and turn it on, it should work perfectly.
Click to expand...
Click to collapse
I did the same thing. It's a common issue, and that's the typical fix.
Planterz said:
I did the same thing. It's a common issue, and that's the typical fix.
Click to expand...
Click to collapse
I had the same problem, solved by a thin plastic sheat that I drilled two holes in and then cut to the right size.
I placed the plastic part in the bottom of the hole, where to fit the sensor. I also shaved of aboute 1 mm on the part that presses the sensor from the back.
( I hade already taken the blackish film away in a own attempt to fix the problem, at least the light sensor seems to meassure more accurat)
Hi all, I've similar problem on my LG G2 D802. I have tempered glass with covered prox. On KK everything was OK, but unfortunately Lollipop has much more intensivity on prox
and I had the same issue as you, I mean - turned screen while I maked call and vice versa. Moreover, I can't get in to the service menu on LP (AOSP 5.1.1).
I bought new tempered glass with uncovered prox but fortunately Xposed has working old module: Disable proximity sensor.
I don't know about what module you guys talked about but this module works very well.

I'm rooted but no idea how to disable proximity sensor

I tried installing the xposed framework but that threw a little notice saying it wasnt going to work. I looked for apps ont he app store but that didnt work as well..
Any ideas on how to disable the proximity sensor so when I turn the screen on it doesnt turn right back off?
Any help is greatly appreciated.
the issue might be your proximity sensor's alignment. it might not have aligned properly. there is a small black rubber holder to hold the proximity sensor. may be you might be missing it or might have loosen it. you can easily fix/align it, if you can open the back cover.
you can install a custom rom to overcome this sudden screen off issue. but when you taking a call your screen will be turning off until other user disconnect the call..
I suggest you fix/align the proximity sensor..
P.S:
There is a small troubleshooting step you can do to see whether your proximity sensor has a slight alignment issue. get a torch or good direct light source and point it directly at proximity sensor. if you can turn your screen on while pointing that light towards proximity sensor, you should have a very small alignment issue. there are plenty of proximity sensor test apps on play store too.
appsmarsterx said:
the issue might be your proximity sensor's alignment. it might not have aligned properly. there is a small black rubber holder to hold the proximity sensor. may be you might be missing it or might have loosen it. you can easily fix/align it, if you can open the back cover.
you can install a custom rom to overcome this sudden screen off issue. but when you taking a call your screen will be turning off until other user disconnect the call..
I suggest you fix/align the proximity sensor..
P.S:
There is a small troubleshooting step you can do to see whether your proximity sensor has a slight alignment issue. get a torch or good direct light source and point it directly at proximity sensor. if you can turn your screen on while pointing that light towards proximity sensor, you should have a very small alignment issue. there are plenty of proximity sensor test apps on play store too.
Click to expand...
Click to collapse
Interseting... My screen broke so I had it replaced and its been having an issue ever since. Also, I don't use it for calls. It is just sitting on a mount in my car most of the day running a few car apps. But it is in airplane mode basically all day lol.
Pr3dict said:
Interseting... My screen broke so I had it replaced and its been having an issue ever since. Also, I don't use it for calls. It is just sitting on a mount in my car most of the day running a few car apps. But it is in airplane mode basically all day lol.
Click to expand...
Click to collapse
that makes sense.. you also replced front housing too right? that's where that rubber proximity sensor holder attached.. if you replace original front housing with aftermarket housing that rubber holder probably won't come with it. most of the repair technicians don't know this.. if you still have the old front housing you should be able to recover it and attach to your new housing..
p. s:
or you should be able to buy it.
here it is
http://rounded.com/lg-g2-d802-rubber-proximity-sensor-module-mbl65540401.html#/product/21920 (also try ebay or aliexpress )
appsmarsterx said:
that makes sense.. you also replced front housing too right? that's where that rubber proximity sensor holder attached.. if you replace original front housing with aftermarket housing that rubber holder probably won't come with it. most of the repair technicians don't know this.. if you still have the old front housing you should be able to recover it and attach to your new housing..
p. s:
or you should be able to buy it.
here it is (also try ebay or aliexpress )
Click to expand...
Click to collapse
Honestly, if its possible I'd rather just disable it completely. I'd rather not open the phone up again if I don't have to and I will never use it for calls anyway.
Pr3dict said:
Honestly, if its possible I'd rather just disable it completely. I'd rather not open the phone up again if I don't have to and I will never use it for calls anyway.
Click to expand...
Click to collapse
if you're not using your g2 for calls, I'd recommend flashing a custom aosp rom. so you wouldn't get in to this sudden screen off issue while unlocking it..
appsmarsterx said:
if you're not using your g2 for calls, I'd recommend flashing a custom aosp rom. so you wouldn't get in to this sudden screen off issue while unlocking it..
Click to expand...
Click to collapse
That sounds exciting.. Lets do it!!!!!!!!!!!!

No AOD when using Samsung Clear View Flip Case?

Exactly as title says. Anyone else have the official clear view case from Samsung? Does AOD work when your cover is closed? Would be pretty convenient and for some reason Samsung decided not to include this handy feature...
It's a limitation I think.
AOD require light sensor, proximity sensor and some other sensor to work. The cover render these sensor useless and then may cause problem with AOD, so that's what I think why samsung disable it.
Sent from my GT-I9500 using Tapatalk
NonXtreme said:
It's a limitation I think.
AOD require light sensor, proximity sensor and some other sensor to work. The cover render these sensor useless and then may cause problem with AOD, so that's what I think why samsung disable it.
Sent from my GT-I9500 using Tapatalk
Click to expand...
Click to collapse
Well the proximity sensors work when talking on the phone with the cover closed... Seems like to me this can be implemented with a minor update.
elpindian said:
Well the proximity sensors work when talking on the phone with the cover closed... Seems like to me this can be implemented with a minor update.
Click to expand...
Click to collapse
Are you sure?
I'm not sure about how this kind of case work on new device but I used to have S-view case on my old s4 and it doesn't use proximity sensor to turn display off when calling with cover closed but use motion sensor to detect the movement of the phone to guess whether I'm holding my phone close to my face (and it fail sometimes)
Maybe you can test this by placing your phone on the table when recieving call. Without moving the phone, try cover the proximity sensor and see whether the screen is off.
NonXtreme said:
Are you sure?
I'm not sure about how this kind of case work on new device but I used to have S-view case on my old s4 and it doesn't use proximity sensor to turn display off when calling with cover closed but use motion sensor to detect the movement of the phone to guess whether I'm holding my phone close to my face (and it fail sometimes)
Maybe you can test this by placing your phone on the table when recieving call. Without moving the phone, try cover the proximity sensor and see whether the screen is off.
Click to expand...
Click to collapse
You are correct sir, it does not use the proximity sensors when the clear cover is on. But even with that, it uses the phone's other sensors to wake and sleep the screen... Why can't this be applied to the AOD? Just a little thing that would be nice to have.
elpindian said:
You are correct sir, it does not use the proximity sensors when the clear cover is on. But even with that, it uses the phone's other sensors to wake and sleep the screen... Why can't this be applied to the AOD? Just a little thing that would be nice to have.
Click to expand...
Click to collapse
Because AOD use proximity sensor to detect whether your phone is in the pocket and turn itself off to save battery. Motion sensor can't do that. Also for motion sensor to detect your movement it need to be on all the time, thus massive battery drain.

Categories

Resources