Soft-bricked G00V (Failed rooting attempt) - Verizon Galaxy S 5 Q&A, Help & Troubleshooting

Heya, so after a failed attempt to root my Samsung Galaxy S5 Verizon (G00V) I soft-bricked it. I have been following a lot of guides on the internet but, so far they haven't worked (I don't know if I didn't have the right software or if I wasn't doing it correctly). I still have access to recovery mode and my PC can detect it. I already have Odin and Samsung USB drivers. If I try to install the stock ROM on Odin I get this:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Next I tried installing the software over SD card from recovery mode, but got this:
Supported API: 3
#MANUAL MODE#
-- Appling Multi-CSC...
Applied the CSC-code : VZW
Successfully applied multi-CSC.
-- Install /sdcard/G900VVRU1BOA8_G900VVZW1BOA8_G900VVRU1BOA8_HOME.tar.md5
Finding update package...
Opening update package...
E:failed to map file
Installation aborted.
Please help!

ThatDemonDavid said:
Heya, so after a failed attempt to root my Samsung Galaxy S5 Verizon (G00V) I soft-bricked it. I have been following a lot of guides on the internet but, so far they haven't worked (I don't know if I didn't have the right software or if I wasn't doing it correctly). I still have access to recovery mode and my PC can detect it. I already have Odin and Samsung USB drivers. If I try to install the stock ROM on Odin I get this:
<ID:0/004> Removed!!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Next I tried installing the software over SD card from recovery mode, but got this:
Supported API: 3
#MANUAL MODE#
-- Appling Multi-CSC...
Applied the CSC-code : VZW
Successfully applied multi-CSC.
-- Install /sdcard/G900VVRU1BOA8_G900VVZW1BOA8_G900VVRU1BOA8_HOME.tar.md5
Finding update package...
Opening update package...
E:failed to map file
Installation aborted.
Please help!
Click to expand...
Click to collapse
Use this method Jrkruse ok3 root on XDA developers under s5 verizon section here is the link
http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370/page1
You might be able to get bootloader unlock also if you have a Samsung 15 Emmc
Go to this thread
http://forum.xda-developers.com/ver...nlocking-galaxys-s5-bootloader-t3337909/page1
Sent from my SM-G900V using Tapatalk

[email protected] said:
Use this method Jrkruse ok3 root on XDA developers under s5 verizon section here is the link
http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370/page1
You might be able to get bootloader unlock also if you have a Samsung 15 Emmc
Go to this thread
http://forum.xda-developers.com/ver...nlocking-galaxys-s5-bootloader-t3337909/page1
Sent from my SM-G900V using Tapatalk
Click to expand...
Click to collapse
That didn't help. My phone is still soft-bricked.

To undo soft brick in Odin flash firmware you are currently on
this shouldnt cause any data loss
download firmware from sammobile . Com
to check which firmware you are on boot into recovery and look at what it tells you this is your firmware you are currently on

[email protected] said:
To undo soft brick in Odin flash firmware you are currently on
this shouldnt cause any data loss
download firmware from sammobile . Com
to check which firmware you are on boot into recovery and look at what it tells you this is your firmware you are currently on
Click to expand...
Click to collapse
'
Thank you so much!!! :good:

Related

Help me unbrick my device. N910H

Hello guys... I have been at this for a few hours now. I own a Note 4 N910H. I had upgraded OTA to lollipop last month. I was reading some reviews on lollipop because I was experiencing a lot of bugs with the OS. A lot of people were having the same issues as me. So I decided to go back to kitkat. This is where my problem happens. I accidentely soft bricked my device.
Everything I've done:
Downloaded kitkat and tried to install via odin. (Didn't check developer settings prior, not sure if this was the problem)
Device soft bricked
Turned on my device and saw this message "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
Tried to access Kies, it said my device wasn't supported.
I googled around and saw an article saying I have to go back to lollipop.
I downloaded lollipop and tried to install via odin. It failed again with the same error when I turn on my device.
All help will be greatly appreciated. I really hope I don't have to send my phone back. I don't have a backup lol.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1BOC5_N910HOXE1BOC5_N910HXXU1BOC5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
drew92c said:
Hello guys... I have been at this for a few hours now. I own a Note 4 N910H. I had upgraded OTA to lollipop last month. I was reading some reviews on lollipop because I was experiencing a lot of bugs with the OS. A lot of people were having the same issues as me. So I decided to go back to kitkat. This is where my problem happens. I accidentely soft bricked my device.
Everything I've done:
Downloaded kitkat and tried to install via odin. (Didn't check developer settings prior, not sure if this was the problem)
Device soft bricked
Turned on my device and saw this message "Firmware upgrade encountered an issue. Please select recovery mode in Kies and try again.
Tried to access Kies, it said my device wasn't supported.
I googled around and saw an article saying I have to go back to lollipop.
I downloaded lollipop and tried to install via odin. It failed again with the same error when I turn on my device.
All help will be greatly appreciated. I really hope I don't have to send my phone back. I don't have a backup lol.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910HXXU1BOC5_N910HOXE1BOC5_N910HXXU1BOC5_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> modem.bin
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Just flash a custom recovery via odin and reboot and you are good to go
Abdl said:
Just flash a custom recovery via odin and reboot and you are good to go
Click to expand...
Click to collapse
Would that root my device? I don't want to void my warranty. If it doesn't void it, how do I go about doing those steps? This whole thing is driven me nuts.
Edit: THANK YOU!!! All is good now!
Use a pit file for it. Because your hidden partition fails. Or you can Flash your latest rom with no error. I think you re trying another rom from your latest.

[Q] Help Galaxy S4 stuck in firmware upgrade....nothing works to fix

Hi,
I have a Galaxy S4 I9500 and tried to update the ROM a few days ago. ODIN crashed before completing and I am now stuck in the yellow triangle screen with " Firmware upgrade encountered an issue....."
I downloaded the stock firmware from Samsung and when I try to install i get the following message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUEMJ8_I9500OJVEMJ8_I9500XXUEMJ8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the phone has a red message in the left corner: SW REV CHECK FAIL DEVICE:3 BINARY:2
I have also tried with to ODIN with a PIT file and looked at various forums and tried different things however nothing seems to work. Is there anything else i can do or is my phone busted?
Why flash a 4.3? It isn't possible.
Just pick the latest version available for you phone and flash that.
You want to downgrade and that isn't possible.
Lennyz1988 said:
Why flash a 4.3? It isn't possible.
Just pick the latest version available for you phone and flash that.
You want to downgrade and that isn't possible.
Click to expand...
Click to collapse
Thanks! That sorted it! Downloaded the latest firmware and it worked! Had taken so long to get it sorted! :laugh::laugh::laugh:

S4 GT-I9506 is stuck on Firmware upgrade encountered an issue

this model seems difficult (gt-i9506)
i tried to root it via towelroot, then kingoroot, these failed but then now the reboot is stuck on "firmware upgrade encountered an issue"
ive tried Kies firmware recovery but the download fails after 80%,
ive tried the sammobile download the ROM this too fails, network drops out tried this 3 times
i want to try Kies emergency recovery but cant find any recovery code
im stuck i dont know what to do now been researching for 4 hours cant find solution :crying:
could anyone please help?? am going crazy over this spent 2 days researching and finding nothing
Download a complete stock rom and flash it with ODIN. You have to uninstall KIES beforehand (they are conflicting).
thanks for reply...
i took kies off and this is what Odin is giving me...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUAMHF_I9506VAUAMH3_I9506XXUAMHD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
the device says this.....
SW REV CHECK FAIL: [aboot]Fused 1 > Binary0
does this highlight anything that could be going wrong?
Not sure... but looks like the rom is not for that device. Are you sure you have a i9506?
on samsmobile GT-I9506/VAU/ Roms (i cant post link)
well the first ROM was 4.2 android (bottom of ROM list), so then tried 4.4 (top of ROM list) android it failed again but with different Odin errors...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUCNJ1_I9506VAUCNJ1_I9506XXUCNK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
can anyone see the fault here...?? no error came up on the device, only on Odin this time
Did you restart after KIES de-installation? Was USB driver successfully missing (so you had to install one manually for ODIN)? If not, you probably still have drivers/files running from KIES.
Otherwise, try a different computer to double check its not the system.
If you originally updated to Android 4.4.x or later on this device, you cannot install 4.3.x or lower as Knox within the bootloader will actively prevent Odin from functioning. As to Odin, make sure you're using the original cable, are not using a hub, have Kies disabled or uninstalled, and use a different USB port. Odin sometimes is picky about the ports it uses.
If you can get the ROM issue resolved, use CF-Autoroot to root, keeping in mind that you will trip the Knox flag in doing so. Towelroot and other one-click root methods don't work on your device.
FIXED IT!!!!!!! :laugh::silly::good::cyclops:
Moved all operations to a different PC running XP with no kies on it
The error still occurred "write fail"
So instead i tried Odin 3.09 instead of 3.07 but most of all i changed usb cables, found an original cable off my mates Nokia
then boom!!! she starting writing!!!
Thankyou so much you legends, you are now my best friends forever!!!
Strangely the new flash, all my old previous data & apps are still on there??? somehow the network is not locked either which i was fearing being a vodafone ROM
still want to root it though
Flashing a ROM through Odin doesn't wipe the data partition, which is why your apps are untouched.

Bricked s6 edge+ g928w8 on frp...fails on odin

I restarted my phone and it went into FRP lock. I can only access download mode and do not have access to recovery. I have tried downloading stock firmware using Odin but it fails every time. When ever I download something from Odin I get this
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and then in my phone it says "secure fail check : (Bootloader)"
Any suggestions on how I can get into my phone!?
Try using Samsung smartswitch while phone is in download mode and use the reinstall feature and see if that cannot help you get back to stock (and a working phone)
I have SM G928F , had same problem. I downgraded the bootloader and succeeded in putting new recovery on my phone and then flashed custom Rom….
Hope this helps.
Mazzie
Hello everyone, mazzie66 could you please explain how you downgraded your bootloader. Thanx
s6 edge+ bricked by frp
I bought second hand s6 edge + g928f blocked google account.
i have the imei and s / n number but i do not know what firmware it had on it.
now it's just download mode or recovery.
I flashed 3-4 firmware stock successfully, but it gets into recovery when it opens.
I used odin / z3x.
I have edited the firmware and combined them with boot / modem / sboot / hidden etc.
I searched in vain how I could learn the former firmware version.
with the smart switch after entering the model and telling her to contact the service center. with kies the same. i just know it is 7.0 encoded vodafone romania.
I've had some bugs with drk.
I would like to ask you how to install a custom rom (twrp) or pass frp lock.
Sorry for English.
This video can help to fix the black, bricked Samsung Galaxy phone, wish helpful with you.
https://www.youtube.com/watch?v=zXSHe3oorIM

Help with rooting galaxy s5 900v 5.0

I have the Samsung Galaxy S5 by Verizon.
It is on the 6.0.1 firmware.
I rooted the device when it was one the 4.4 firmware. When I did OTA update, I lost it.
I am trying to flash the 4.4 rom onto the phone through ODIN.
I get this on ODIN
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone it says
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
BTW the volume keys don't work so I used adb to enter download mode.
Please help
Thanks
I am on marshmallow 6.0.1
I can't flash any rom or tar files.
There is a screenshot attachment with more info.
how to downgrade to kitkat
deleted
I can't root the phone because it won't let me flash a custom rom.
I also have tried flashing the rom from the micro SD but the phone says signature verification failed.
what Ota and baseband version are you on?
extremewonder1 said:
I have the Samsung Galaxy S5 by Verizon.
It is on the 5.0 firmware.
I rooted the device when it was one the 4.4 firmware. When I did OTA update, I lost it.
I am trying to flash the 4.4 rom onto the phone through ODIN.
I get this on ODIN
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone it says
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
BTW the volume keys don't work so I used adb to enter download mode.
Please help
Thanks
Click to expand...
Click to collapse
Go to this thread http://forum.xda-developers.com/showthread.php?t=2784880
If you took the OTA of anything higher than OD5, you would be unable to ODIN back to NCG(KitKat). It sounds as if your device may have taken the OTA of MM....but I wouldn't be able to answer you that....as you had stated that you were on 4.4 KitKat, did you have at least SafeStrap installed? If so, try to flash the NI2 kernal via Odin to see if you can get back into SafeStrap....
---------- Post added at 03:24 AM ---------- Previous post was at 03:18 AM ----------
hauckk said:
first root the phone http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370/
then unlock the bootloader http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
then install custom recovery just google twrp download then flash using odin
then find a stock custom rooted rom and install it using twrp and make sure to download gapps also. i prefer open gapps. google open gapps for kitkat. make sure to flash both the rom and gapps at the same time in twrp ps your rom may come with the google apps make sure to check before you install gapps.
Click to expand...
Click to collapse
Why are you having him install TWRP and a CM ROM? No where did he mentioned that he had an "Unlocked Bootloader". He said that he was "ROOTED" on 4.4 KitKat and happened to lose root via an OTA. Which WE don't exactly know which OTA....so please, before digging him/her deeper in a hole, respectively respond with SAFE and Helpful advice....thank you

Categories

Resources