I have the Samsung Galaxy S5 by Verizon.
It is on the 6.0.1 firmware.
I rooted the device when it was one the 4.4 firmware. When I did OTA update, I lost it.
I am trying to flash the 4.4 rom onto the phone through ODIN.
I get this on ODIN
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone it says
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
BTW the volume keys don't work so I used adb to enter download mode.
Please help
Thanks
I am on marshmallow 6.0.1
I can't flash any rom or tar files.
There is a screenshot attachment with more info.
how to downgrade to kitkat
deleted
I can't root the phone because it won't let me flash a custom rom.
I also have tried flashing the rom from the micro SD but the phone says signature verification failed.
what Ota and baseband version are you on?
extremewonder1 said:
I have the Samsung Galaxy S5 by Verizon.
It is on the 5.0 firmware.
I rooted the device when it was one the 4.4 firmware. When I did OTA update, I lost it.
I am trying to flash the 4.4 rom onto the phone through ODIN.
I get this on ODIN
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone it says
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
BTW the volume keys don't work so I used adb to enter download mode.
Please help
Thanks
Click to expand...
Click to collapse
Go to this thread http://forum.xda-developers.com/showthread.php?t=2784880
If you took the OTA of anything higher than OD5, you would be unable to ODIN back to NCG(KitKat). It sounds as if your device may have taken the OTA of MM....but I wouldn't be able to answer you that....as you had stated that you were on 4.4 KitKat, did you have at least SafeStrap installed? If so, try to flash the NI2 kernal via Odin to see if you can get back into SafeStrap....
---------- Post added at 03:24 AM ---------- Previous post was at 03:18 AM ----------
hauckk said:
first root the phone http://forum.xda-developers.com/verizon-galaxy-s5/general/root-method-og5-ok3-t3290370/
then unlock the bootloader http://forum.xda-developers.com/ver...t/rd-unlocking-galaxys-s5-bootloader-t3337909
then install custom recovery just google twrp download then flash using odin
then find a stock custom rooted rom and install it using twrp and make sure to download gapps also. i prefer open gapps. google open gapps for kitkat. make sure to flash both the rom and gapps at the same time in twrp ps your rom may come with the google apps make sure to check before you install gapps.
Click to expand...
Click to collapse
Why are you having him install TWRP and a CM ROM? No where did he mentioned that he had an "Unlocked Bootloader". He said that he was "ROOTED" on 4.4 KitKat and happened to lose root via an OTA. Which WE don't exactly know which OTA....so please, before digging him/her deeper in a hole, respectively respond with SAFE and Helpful advice....thank you
Related
Hi I have s4 i9500 (pak region). Installed kitkat 4.4.2 russian by odin 3.09 worked fine. Now i want to install my stock rom 4.3 pak region but it fails i have tried many times using diferent computers and cables. odin log is given below:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUEMJ8_I9500OJVEMJ8_I9500XXUEMJ8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
On the phone when i enter downloading mode it says knox warrenty void:1
after i try flashing stock 4.3 firmware phone says SW Check fails Binary:1
How can i fix this and install my region firmware please help.
Or i cannot downgrade to 4.3 because of bootloader update please let me know. thanks
Your last sentence has the answer....
you can try restoring the backup (if you did) of boot; i think.
theunderling said:
Your last sentence has the answer....
Click to expand...
Click to collapse
thanks
U should nt try of downgrading from 4.4.2
Quick question
I have the same problem and i wish to go back to 4.3 jellybean because the gyroscope its not working when i try to install the rom 4.4.2 in odin fail the same so if you can point me where to look. that would be great. ( i apologize for my low tech knowledge and my english)
For now I think there is no way to downgrade as because of bootloader
Hello I have an Att Samsung Galaxy s4 SGH-I337 running 4.3 Jellybean. I have had it rooted but something went wrong when trying to flash a custom rom. I got it stuck in download mode and it took me a while to get it out. I had to do several battery pulls when it finally booted I unrooted the phone and it works normal. Except when trying to install a new update it tries to reboot but goes into download mode. So i try to boot into recovery and can only get it into recovery mode. I have no idea what I have done and I have tried to use kies and odin to no success odin just gives me an error. thank you for your help
What error do you see with Odin? What file are you trying to flash?
I try to flash back to original firmware using sammobile.com/firmwares/1/ and when I try to use odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you for your help
mm99baller said:
I try to flash back to original firmware using sammobile.com/firmwares/1/ and when I try to use odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you for your help
Click to expand...
Click to collapse
It appears that you are flashing the MDL firmware. I took is as your phone has MDL firmware.
I used to have MDL phone and it went to boot-loop due to my error in flashing a custom rom.
I used that MDL firmware to flash but it failed. So I used MDB files to flash and it went through. My phone booted as MDB phone. That was my experience with that MDL file.
thank you for your reply I had the MDB file as well and just tried again. It gave me the same error as before.
mm99baller said:
thank you for your reply I had the MDB file as well and just tried again. It gave me the same error as before.
Click to expand...
Click to collapse
You started from 4.3 so you need to flash the same version. Use the MK2 ODIN files.
Sent from my SGH-I337 running GPE
Hello i was running CM 11 on my gt-i9500 then i installed the alpha i think it was chinese of lolipop 5.0 stock version
yesterday sammobile released official version russian of 5.0 so i downloaded it , and i think something went wrong because this message show when i turn on my phone Firmware upgrade encountered an issue please select recovery mode in kies and try again
i tried every thing flashing old stock new stock using recover and all things every time i try to install it using odin tried most version of odin
it give me fail in system this msg show
and i tried removed kies and installation tried while its on and while its off !!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOA7_I9500SERHOA7_I9500XXUHOA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
Please HELP FAST!!
Hi,
I have a Galaxy S4 I9500 and tried to update the ROM a few days ago. ODIN crashed before completing and I am now stuck in the yellow triangle screen with " Firmware upgrade encountered an issue....."
I downloaded the stock firmware from Samsung and when I try to install i get the following message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUEMJ8_I9500OJVEMJ8_I9500XXUEMJ8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the phone has a red message in the left corner: SW REV CHECK FAIL DEVICE:3 BINARY:2
I have also tried with to ODIN with a PIT file and looked at various forums and tried different things however nothing seems to work. Is there anything else i can do or is my phone busted?
Why flash a 4.3? It isn't possible.
Just pick the latest version available for you phone and flash that.
You want to downgrade and that isn't possible.
Lennyz1988 said:
Why flash a 4.3? It isn't possible.
Just pick the latest version available for you phone and flash that.
You want to downgrade and that isn't possible.
Click to expand...
Click to collapse
Thanks! That sorted it! Downloaded the latest firmware and it worked! Had taken so long to get it sorted! :laugh::laugh::laugh:
I have the Samsung Galaxy S5 by Verizon.
It is on the 5.0 firmware.
I rooted the device when it was one the 4.4 firmware. When I did OTA update, I lost it.
I am trying to flash the 4.4 rom onto the phone through ODIN.
I get this on ODIN
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> ALL_VZW_G900VVRU1ANCG_G900VVZW1ANCG_964333_REV00_u ser_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
On the phone it says
SW REV CHECK FAIL : [aboot]Fused 2 > Binary 1
BTW the volume keys don't work so I used adb to enter download mode.
Please help
Thanks
To root on lollipop you go to ok3 root thread by Jr Kruse on xda in s5 verizon forums it is a sticky
then you may be able to bootloader unlock
by also going to bootloader unlock for kk-mm by getex it is also a sticky in the s5 verizon forum on XDA
If you want to downgrade to kitkat on your s5 after upgrading to lollipop the only way you can is to go to brens123 guide I booted ncg on PB1 bootloader it is a thread in s5 verizon general forum on xda
This is only a partial downgrade you are still on PB1 bootloader