I restarted my phone and it went into FRP lock. I can only access download mode and do not have access to recovery. I have tried downloading stock firmware using Odin but it fails every time. When ever I download something from Odin I get this
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
and then in my phone it says "secure fail check : (Bootloader)"
Any suggestions on how I can get into my phone!?
Try using Samsung smartswitch while phone is in download mode and use the reinstall feature and see if that cannot help you get back to stock (and a working phone)
I have SM G928F , had same problem. I downgraded the bootloader and succeeded in putting new recovery on my phone and then flashed custom Rom….
Hope this helps.
Mazzie
Hello everyone, mazzie66 could you please explain how you downgraded your bootloader. Thanx
s6 edge+ bricked by frp
I bought second hand s6 edge + g928f blocked google account.
i have the imei and s / n number but i do not know what firmware it had on it.
now it's just download mode or recovery.
I flashed 3-4 firmware stock successfully, but it gets into recovery when it opens.
I used odin / z3x.
I have edited the firmware and combined them with boot / modem / sboot / hidden etc.
I searched in vain how I could learn the former firmware version.
with the smart switch after entering the model and telling her to contact the service center. with kies the same. i just know it is 7.0 encoded vodafone romania.
I've had some bugs with drk.
I would like to ask you how to install a custom rom (twrp) or pass frp lock.
Sorry for English.
This video can help to fix the black, bricked Samsung Galaxy phone, wish helpful with you.
https://www.youtube.com/watch?v=zXSHe3oorIM
Related
I managed to soft brick my Galaxy S5 from AT&T and this happened when I was trying to downgrade to 4.4.2 Kitkat so that I could root it, and i have basically created a bootloop to where every time I shut it down and start it up, all I get is the "Firmware upgrade encountered an issue. Pleases select recovery mode in Kies & try again) the only problem is that Kies isn't connecting my phone and I've tried both versions of Kies. Kies and it's processes are killed when I use odin. I can still use Download mode, but I really need to get my phone to at least boot up again. All the data was wiped so I don't care about getting it back, but I just really need some help. The Odin text that I keep getting is:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks in advance.
hello
i have been flashing roms for ages now and really never had such a problem like this before , i am on sweet rom , model number N910U ( new zealand ) , i need to go back to stock rom cause there to been a hardware problem with the camera, thought i better get back to stock before i take it in .
i have unsuccessfully trying to unroot via odin ( Odin3 v3.09) tried using this firmware "BRI-N910UXXU1BOGB-20150731100307" and even had worse luck with this one " CTI-N910UXXU1BOE1-20150721100509" (fails in a few seconds)
seems to have failed just before it gets to hidden.img
heres the log :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N910UXXU1BOGB_N910UZZT1BOGB_N910UXXU1BOGB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> cache.img
<ID:0/004> hidden.img
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Hello,
I have the same problem on the S5+ and for the moment i don't find solution for this problem. I think CSC is causing this error and my advice is to install samsung phone info to find CSC and download right firmware for your phone. After that you can try to reinstall with Odin the firmware .
Sent from my SM-G901F using Tapatalk 2
hi everyone i'm new to this forum so bare with me please.
i recently bought a galaxy note 4 sm-910F and it was rooted, i wanted to get rid of the root in order to get the updates for android (because the phone is running kit kat) but i couldn't after doing some research i found that i have to flash the stock firmware of lollipop for my model using Odin. i checked the usb debugging and followed the instructions but when i press start in oddin here's what comes :
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
please help me i want to get rid of this root . thank you very much in advance
Try kies Samsung
Hi so earlier today I had enough of my phone being stuck in a boot loop for hours and wanted to do something about it so I went to factory reset it in recovery mode and the phone reset and now because of that it's stuck in a loop not getting past the Hg3 logo and when I try to go back to recovery mode it's saying something about the cache and fails every time. So i'm told it's bricked and started using odin3 at first I couldn't get it to work but I got a little further.
I have a S7 edge - SM-G935F - HG3 (Three) - I'm guessing it's 6.0.1 (marshmallow ?)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925VVRU1AOE2_G925VVZW1AOE2_G925VVRU1AOE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please someone help me, I switched to android because people said it was better than apple but so far all It's given me is problems
you're flashing the wrong firmware..
your firmware name will start with G935, not G925.
G925 is S6 EDGE
Connerwade1996 said:
Hi so earlier today I had enough of my phone being stuck in a boot loop for hours and wanted to do something about it so I went to factory reset it in recovery mode and the phone reset and now because of that it's stuck in a loop not getting past the Hg3 logo and when I try to go back to recovery mode it's saying something about the cache and fails every time. So i'm told it's bricked and started using odin3 at first I couldn't get it to work but I got a little further.
I have a S7 edge - SM-G935F - HG3 (Three) - I'm guessing it's 6.0.1 (marshmallow ?)
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> G925VVRU1AOE2_G925VVZW1AOE2_G925VVRU1AOE2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> cm.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Please someone help me, I switched to android because people said it was better than apple but so far all It's given me is problems
Click to expand...
Click to collapse
Try use smart switch because sometimes odin doesn't work
Hello to all,
i am using an S4 GT-I9500 indian variant,
while flashing the phone with the stock firmware i did a mistake and clicked on the wrong button "BL" instead of "AP"
in my ODIN software and the operation failed with the button "BL".
now i tried to installing the firmware by using the "AP" button but i am getting the following message in the ODIN
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHPI2_I9500YDDHPI1_I9500DDUHPE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
i have tried it using recovery mode with CWM and TWRP boot loaders, and i am not able to wipe the data using the TWRP boot loader.....
and even tried connecting to samsung Kies it gives me an error message as "GT-I9500" does not support initialising....
so can anyone please help me get my phone back to running....
Thanks in advance......
Are you flashing the latest stock ROM with Odin?
STOCK Rom
Are you flashing the latest stock ROM with Odin?
Yes, My phone was stuck in Samsung logo (Boot loop)
So i tried flashing it with the stock ROM with Odin
when i tried it did not complete the flashing, instead it ended up with a Blank screens with the message that "Firmware encountered an issue please select recovery mode in Kies and try Again".
And when i try flashing the Stock ROM with Odin this the following tread that i am getting.
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHPI2_I9500YDDHPI1_I9500DDUHPE1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Tried using Odin 3.07, the original Samsung usb cable, or a different usb 2.0 port?