this model seems difficult (gt-i9506)
i tried to root it via towelroot, then kingoroot, these failed but then now the reboot is stuck on "firmware upgrade encountered an issue"
ive tried Kies firmware recovery but the download fails after 80%,
ive tried the sammobile download the ROM this too fails, network drops out tried this 3 times
i want to try Kies emergency recovery but cant find any recovery code
im stuck i dont know what to do now been researching for 4 hours cant find solution :crying:
could anyone please help?? am going crazy over this spent 2 days researching and finding nothing
Download a complete stock rom and flash it with ODIN. You have to uninstall KIES beforehand (they are conflicting).
thanks for reply...
i took kies off and this is what Odin is giving me...
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUAMHF_I9506VAUAMH3_I9506XXUAMHD_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
the device says this.....
SW REV CHECK FAIL: [aboot]Fused 1 > Binary0
does this highlight anything that could be going wrong?
Not sure... but looks like the rom is not for that device. Are you sure you have a i9506?
on samsmobile GT-I9506/VAU/ Roms (i cant post link)
well the first ROM was 4.2 android (bottom of ROM list), so then tried 4.4 (top of ROM list) android it failed again but with different Odin errors...
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9506XXUCNJ1_I9506VAUCNJ1_I9506XXUCNK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
can anyone see the fault here...?? no error came up on the device, only on Odin this time
Did you restart after KIES de-installation? Was USB driver successfully missing (so you had to install one manually for ODIN)? If not, you probably still have drivers/files running from KIES.
Otherwise, try a different computer to double check its not the system.
If you originally updated to Android 4.4.x or later on this device, you cannot install 4.3.x or lower as Knox within the bootloader will actively prevent Odin from functioning. As to Odin, make sure you're using the original cable, are not using a hub, have Kies disabled or uninstalled, and use a different USB port. Odin sometimes is picky about the ports it uses.
If you can get the ROM issue resolved, use CF-Autoroot to root, keeping in mind that you will trip the Knox flag in doing so. Towelroot and other one-click root methods don't work on your device.
FIXED IT!!!!!!! :laugh::silly::good::cyclops:
Moved all operations to a different PC running XP with no kies on it
The error still occurred "write fail"
So instead i tried Odin 3.09 instead of 3.07 but most of all i changed usb cables, found an original cable off my mates Nokia
then boom!!! she starting writing!!!
Thankyou so much you legends, you are now my best friends forever!!!
Strangely the new flash, all my old previous data & apps are still on there??? somehow the network is not locked either which i was fearing being a vodafone ROM
still want to root it though
Flashing a ROM through Odin doesn't wipe the data partition, which is why your apps are untouched.
Related
I've got a sprint galaxy s4, was running 4.2.2 and I had added the hotspot mod by overwriting some files to make that happen. I was attempting to go back to stock in order to update to 4.3 via an Odin3 flash and something happened. I can only boot into the download mode, I can't get into recovery mode at all. If I try to get into recovery, I get the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again"
Kies will not recognize my phone. When I plug it into my computer via usb, I hear a notification. Kies attempts to connect, but never does successfully. I have no way of getting my serial number as I can't boot it and it's not listed under the battery cover. I have tried uninstalling/reinstalling drivers with no success. I have tried to uninstall Kies completely and flash via Odin3 but get a failure below
<ID:0/003> Added!!
<ID:0/003> Removed!!
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMF9_L720SPTAMF9_L720VPUAMF9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> sbl2.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> sbl3.mbn
<ID:0/003> rpm.mbn
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/003> Removed!!
<ID:0/003> Added!!
<ID:0/003> Removed!!
Also tried again and got these messages
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> L720VPUAMF9_L720SPTAMF9_L720VPUAMF9_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Removed!!
<ID:0/003> Get PIT for mapping..
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
I hope I've provided info on what I have tried. I am not an expert by any means, but would really appreciate any help. At this point I'm looking to just get back to stock and have a usable phone. I don't care about losing any info and am willing to wipe/flash whatever I can. Thank you for any input! I'm hoping to not have to take this to the sprint store
You just have to odin the stock mf9 tar again. I would try a different version of odin, a different usb port, or a different usb cable. Odin will fix your problem, don't use kies. I used odin 3 version 3.07 but I've also had a lot of success with odin 3 ver 1.85 that is included when you download cf autoroot. Also, make sure you are running odin as administrator.
cruise350 said:
You just have to odin the stock mf9 tar again. I would try a different version of odin, a different usb port, or a different usb cable. Odin will fix your problem, don't use kies. I used odin 3 version 3.07 but I've also had a lot of success with odin 3 ver 1.85 that is included when you download cf autoroot. Also, make sure you are running odin as administrator.
Click to expand...
Click to collapse
Thanks for your reply. I am trying to flash the stock .tar but I'm not having any success. I get the error messages I listed above. Any clue what those mean or what I could be doing wrong? That looks like greek to me. I really don't know what any of it means.
i would just use the CF-autoroot odin......this has saved my ass twice !!! seems to be the " mirical odin " program
chris-allen said:
i would just use the CF-autoroot odin......this has saved my ass twice !!! seems to be the " mirical odin " program
Click to expand...
Click to collapse
wow. Finally figured it out. I tried 3 different USB ports, none of those worked. Tried a 4th on the back of my PC and viola, finally got Odin to work. THanks for your help!
Hours of searching and I can't find a similar problem.
I haven't done anything to my phone in many many months and to my knowledge I was still at the MDL level, rooted. Wife picked up the phone and allowed the update....downloaded 728 MB and rebooted.
Now it will only boot to the odin screen.
I have tried reflashing the MDL tar(still had it on my computer) using odin and it fails every time and the phone screen reads "SW REV. CHECK FAILED FUSED 2 BINARY 1" The ODIN screen reads:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Is this because it had already flashed some level of the new software before rebooting and now it won't let me "revert" to MDL? Do I now need to flash a newer tar?
Orionsax7 said:
Hours of searching and I can't find a similar problem.
I haven't done anything to my phone in many many months and to my knowledge I was still at the MDL level, rooted. Wife picked up the phone and allowed the update....downloaded 728 MB and rebooted.
Now it will only boot to the odin screen.
I have tried reflashing the MDL tar(still had it on my computer) using odin and it fails every time and the phone screen reads "SW REV. CHECK FAILED FUSED 2 BINARY 1" The ODIN screen reads:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Is this because it had already flashed some level of the new software before rebooting and now it won't let me "revert" to MDL? Do I now need to flash a newer tar?
Click to expand...
Click to collapse
Yes, you will have to flash MF3 (or higher).
Orionsax7 said:
Hours of searching and I can't find a similar problem.
I haven't done anything to my phone in many many months and to my knowledge I was still at the MDL level, rooted. Wife picked up the phone and allowed the update....downloaded 728 MB and rebooted.
Now it will only boot to the odin screen.
I have tried reflashing the MDL tar(still had it on my computer) using odin and it fails every time and the phone screen reads "SW REV. CHECK FAILED FUSED 2 BINARY 1" The ODIN screen reads:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Is this because it had already flashed some level of the new software before rebooting and now it won't let me "revert" to MDL? Do I now need to flash a newer tar?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2502003
As @jaboo stated above your need to flash MF3 or higher... it's highly advisable to use MF3 opposed to MK2 if your planning on using custom rom's. Once you get MF3 immediately root it, block the 4.3 update with Titanium Backup, install Safestrap, and flash a custom TW-based 4.2.2 rom in either a custom slot, or stock if your feeling adventurous. Must suck having lost your MDL...
I suspected the "SW REV CHECK" was a giveaway and you guys nailed it! Downloaded and flashed the MF3 tars and it worked perfectly. Thanks!
Although now that I may be able to run ROMs again, I'll look into getting my old favorite back....PACMAN!
Hi,
I have a Galaxy S4 I9500 and tried to update the ROM a few days ago. ODIN crashed before completing and I am now stuck in the yellow triangle screen with " Firmware upgrade encountered an issue....."
I downloaded the stock firmware from Samsung and when I try to install i get the following message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUEMJ8_I9500OJVEMJ8_I9500XXUEMJ8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the phone has a red message in the left corner: SW REV CHECK FAIL DEVICE:3 BINARY:2
I have also tried with to ODIN with a PIT file and looked at various forums and tried different things however nothing seems to work. Is there anything else i can do or is my phone busted?
Why flash a 4.3? It isn't possible.
Just pick the latest version available for you phone and flash that.
You want to downgrade and that isn't possible.
Lennyz1988 said:
Why flash a 4.3? It isn't possible.
Just pick the latest version available for you phone and flash that.
You want to downgrade and that isn't possible.
Click to expand...
Click to collapse
Thanks! That sorted it! Downloaded the latest firmware and it worked! Had taken so long to get it sorted! :laugh::laugh::laugh:
ok let`s start from the start, i tried to root my note 3 sm-n9005 and failed to succeed.
i used the cf auto root guide, odin said success but my phone failed to boot and went straight to recovery mode.
then, i tried using odin 3.07/09/11/185 to rewrite into the stock rom, but odins says FAIL and gives nothing in return.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUGBPB1_N9005EVRGBPB1_N9005XXUGBOJ1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> FAIL! (Size)
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
i just want get my phone back with android that above 4.4
please help :crying:
Looks like the ROM you are trying to flash is not made for your phone or the ROM is older than the ROM currently installed on the phone.
Are you using the original Samsung USB cable? Tried different USB cables and ports?
For Root note 3 use Towelroot by Chainfire.
Sent from my Limited Edition Note 3 LTE using Super Tapatalk
Download Official 5.0 ROM from Sammobile and flash it in Odin, after it try to root phone...
In dialog this looks like firmware file is damaged
The firmware doesn't look damaged, the firmware you are trying to flash has a bootloader that is older than the bootloader in the phone.
isn't chainfire's root method called cfautoroot?
download one more time...
I am trying to return my Galaxy s4 SGH-1337 to the original - to unroot it. I rooted it but then the wifi didn't work. I tried to fix the wifi issue but after many hours of trying, I decided to just reinstall the original firmware. I downloaded the I337UCUAMDL_I337ATTAMDL_ATT.zip, expanded it and ran it with Odin and it failed. Following is the message stream from Odin.
If anyone can help me with this I would really appreciate it. BTW - I can't download anything directly to the phone because wifi is not working.
Odin message stream:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> FAIL! (Auth)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Try again with:
Another USB port
Another USB cable
Another PC
Another Windows version
Another Odin version.
Your phone was issued by AT&T and looks to have a locked bootloader and the ROM you are trying to flash is too old.
ROM is too old
audit13 said:
Your phone was issued by AT&T and looks to have a locked bootloader and the ROM you are trying to flash is too old.
Click to expand...
Click to collapse
Audit13,
How do I unlock the bootloader and get a more recent ROM? Thanks.
The bootloader on the i337 cannot be unlocked once it has been locked.
Look here more information: http://forum.xda-developers.com/galaxy-s4-att/general/guide-odin-to-stock-updating-rooting-t2926642