Hours of searching and I can't find a similar problem.
I haven't done anything to my phone in many many months and to my knowledge I was still at the MDL level, rooted. Wife picked up the phone and allowed the update....downloaded 728 MB and rebooted.
Now it will only boot to the odin screen.
I have tried reflashing the MDL tar(still had it on my computer) using odin and it fails every time and the phone screen reads "SW REV. CHECK FAILED FUSED 2 BINARY 1" The ODIN screen reads:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Is this because it had already flashed some level of the new software before rebooting and now it won't let me "revert" to MDL? Do I now need to flash a newer tar?
Orionsax7 said:
Hours of searching and I can't find a similar problem.
I haven't done anything to my phone in many many months and to my knowledge I was still at the MDL level, rooted. Wife picked up the phone and allowed the update....downloaded 728 MB and rebooted.
Now it will only boot to the odin screen.
I have tried reflashing the MDL tar(still had it on my computer) using odin and it fails every time and the phone screen reads "SW REV. CHECK FAILED FUSED 2 BINARY 1" The ODIN screen reads:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Is this because it had already flashed some level of the new software before rebooting and now it won't let me "revert" to MDL? Do I now need to flash a newer tar?
Click to expand...
Click to collapse
Yes, you will have to flash MF3 (or higher).
Orionsax7 said:
Hours of searching and I can't find a similar problem.
I haven't done anything to my phone in many many months and to my knowledge I was still at the MDL level, rooted. Wife picked up the phone and allowed the update....downloaded 728 MB and rebooted.
Now it will only boot to the odin screen.
I have tried reflashing the MDL tar(still had it on my computer) using odin and it fails every time and the phone screen reads "SW REV. CHECK FAILED FUSED 2 BINARY 1" The ODIN screen reads:
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Is this because it had already flashed some level of the new software before rebooting and now it won't let me "revert" to MDL? Do I now need to flash a newer tar?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2502003
As @jaboo stated above your need to flash MF3 or higher... it's highly advisable to use MF3 opposed to MK2 if your planning on using custom rom's. Once you get MF3 immediately root it, block the 4.3 update with Titanium Backup, install Safestrap, and flash a custom TW-based 4.2.2 rom in either a custom slot, or stock if your feeling adventurous. Must suck having lost your MDL...
I suspected the "SW REV CHECK" was a giveaway and you guys nailed it! Downloaded and flashed the MF3 tars and it worked perfectly. Thanks!
Although now that I may be able to run ROMs again, I'll look into getting my old favorite back....PACMAN!
Related
I've got a soft bricked Verizon Galaxy Note 3 and I've tried just about everything I've seen on every other thread to fix it. I'm not really "new" to rooting, I've been doing on every phone I've owned since the HTC Thunderbolt (I regretted that purchase immensely).
The phone was a gift that I just received the day before yesterday, and I didn't think to check whether it came pre-loaded with the latest update that supposedly makes this type of soft brick happen.
After using Odin to try and load Root de la Vega, it gets stuck right away.
Here's the feed from Odin:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Root_de_la_Vega.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> cache.img.ext4
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Regardless of what I'm trying to load to the device, whether it's the root file, or the "fix" files with the correct PIT and everything, it still stops at the same point. Anyone know how to fix this particular problem?
If you soft-bricked it using RdlV, why are you attempting to recover from that situation by continuing to use RdlV ("Root_de_la_Vega.tar.md5") ?
[Edit] - you mention some other files, but in a pretty vague way. Please be specific.
Flash the pure stock Odin file onto the phone and root in a different fashion (kingo or vroot).
Since you don't know which release was on the phone, neither do we, so I suppose that means you should assume you had MJE, and therefore the only stock Odin file you can flash is
ALL_N900VVRUBMJE_N900VVZWMJE_2106277_REV03_user_low_ship_MULTI_CERT.tar.md5
http://forum.xda-developers.com/showthread.php?t=2524572
good luck
Hello I have an Att Samsung Galaxy s4 SGH-I337 running 4.3 Jellybean. I have had it rooted but something went wrong when trying to flash a custom rom. I got it stuck in download mode and it took me a while to get it out. I had to do several battery pulls when it finally booted I unrooted the phone and it works normal. Except when trying to install a new update it tries to reboot but goes into download mode. So i try to boot into recovery and can only get it into recovery mode. I have no idea what I have done and I have tried to use kies and odin to no success odin just gives me an error. thank you for your help
What error do you see with Odin? What file are you trying to flash?
I try to flash back to original firmware using sammobile.com/firmwares/1/ and when I try to use odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you for your help
mm99baller said:
I try to flash back to original firmware using sammobile.com/firmwares/1/ and when I try to use odin it says
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I337UCUAMDL_I337ATTAMDL_I337UCUAMDL_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thank you for your help
Click to expand...
Click to collapse
It appears that you are flashing the MDL firmware. I took is as your phone has MDL firmware.
I used to have MDL phone and it went to boot-loop due to my error in flashing a custom rom.
I used that MDL firmware to flash but it failed. So I used MDB files to flash and it went through. My phone booted as MDB phone. That was my experience with that MDL file.
thank you for your reply I had the MDB file as well and just tried again. It gave me the same error as before.
mm99baller said:
thank you for your reply I had the MDB file as well and just tried again. It gave me the same error as before.
Click to expand...
Click to collapse
You started from 4.3 so you need to flash the same version. Use the MK2 ODIN files.
Sent from my SGH-I337 running GPE
Hello i was running CM 11 on my gt-i9500 then i installed the alpha i think it was chinese of lolipop 5.0 stock version
yesterday sammobile released official version russian of 5.0 so i downloaded it , and i think something went wrong because this message show when i turn on my phone Firmware upgrade encountered an issue please select recovery mode in kies and try again
i tried every thing flashing old stock new stock using recover and all things every time i try to install it using odin tried most version of odin
it give me fail in system this msg show
and i tried removed kies and installation tried while its on and while its off !!
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUHOA7_I9500SERHOA7_I9500XXUHOA7_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/004> Removed!!
Click to expand...
Click to collapse
Please HELP FAST!!
I managed to soft brick my Galaxy S5 from AT&T and this happened when I was trying to downgrade to 4.4.2 Kitkat so that I could root it, and i have basically created a bootloop to where every time I shut it down and start it up, all I get is the "Firmware upgrade encountered an issue. Pleases select recovery mode in Kies & try again) the only problem is that Kies isn't connecting my phone and I've tried both versions of Kies. Kies and it's processes are killed when I use odin. I can still use Download mode, but I really need to get my phone to at least boot up again. All the data was wiped so I don't care about getting it back, but I just really need some help. The Odin text that I keep getting is:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_G900AUCU1ANCE_964333_REV00_user_low_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1005)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Auth)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Thanks in advance.
Hi,
I have a Galaxy S4 I9500 and tried to update the ROM a few days ago. ODIN crashed before completing and I am now stuck in the yellow triangle screen with " Firmware upgrade encountered an issue....."
I downloaded the stock firmware from Samsung and when I try to install i get the following message:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9500XXUEMJ8_I9500OJVEMJ8_I9500XXUEMJ8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Also the phone has a red message in the left corner: SW REV CHECK FAIL DEVICE:3 BINARY:2
I have also tried with to ODIN with a PIT file and looked at various forums and tried different things however nothing seems to work. Is there anything else i can do or is my phone busted?
Why flash a 4.3? It isn't possible.
Just pick the latest version available for you phone and flash that.
You want to downgrade and that isn't possible.
Lennyz1988 said:
Why flash a 4.3? It isn't possible.
Just pick the latest version available for you phone and flash that.
You want to downgrade and that isn't possible.
Click to expand...
Click to collapse
Thanks! That sorted it! Downloaded the latest firmware and it worked! Had taken so long to get it sorted! :laugh::laugh::laugh: