Database Users

[Q] No cellular data on Sprint with Omnirom 4.4.2

I have a rooted Sprint Galaxy S4. Just flashed the 12/21/2013 4.4.2 OmniROM and everything seems to work flawlessly except for I am unable to activate my cellular data. Calls and texts work just fine. I already tried flashing the Sprint APN settings from http://forum.xda-developers.com/showthread.php?p=47813564 and still can't get it to work. Can someone point me to the right direction to get this fix? Many thanks!

You can try manually entering them in with APN shortcut or you can open the apns with voice dialer! Im on a uscc s4 and found I have way more success manually entering them in!
Sent from my SCH-R970 using Tapatalk

Nick, you get this to work on the us cellular with 4g and all?
BTW, make sure to have a good backup of EFS
Sent from my SCH-R970 using Tapatalk

Not made it over to omni yet but I plan on giving it a run! I always put the apns manually and got a friend on the sprint version that's had more success doing it that way other than flashing the fix zip!
Sent from my SCH-R970 using Tapatalk
---------- Post added at 10:13 PM ---------- Previous post was at 10:07 PM ----------
I've got slim, gummy, cyanfox, and the 12/22 nightly of cm all to try so I'll be good on flashing for a day or so! Lol after I get through those by then maybe probam will be up for the uscc s4!! Gonna be a good Christmas!!!
Sent from my SCH-R970 using Tapatalk

bignick1215 said:
Not made it over to omni yet but I plan on giving it a run! I always put the apns manually and got a friend on the sprint version that's had more success doing it that way other than flashing the fix zip!
Sent from my SCH-R970 using Tapatalk
---------- Post added at 10:13 PM ---------- Previous post was at 10:07 PM ----------
I've got slim, gummy, cyanfox, and the 12/22 nightly of cm all to try so I'll be good on flashing for a day or so! Lol after I get through those by then maybe probam will be up for the uscc s4!! Gonna be a good Christmas!!!
Sent from my SCH-R970 using Tapatalk
Click to expand...
Click to collapse
Do you have the Sprint APN settings? I tried looking for it and they don't seem to have the updated ones. Can you link me? Many thanks.

Try here
http://buzzmobile.us/sprint-apn-settings-android-us/
Sent from my SCH-R970 using Tapatalk

Thanks, but it's still not working... Any other idea where the apn settings are or should I go to the Sprint store for assistance?

Im not sure if they'll give them to you! There's more than that link if you try googling it you get quiet a few options maybe one that'll work is in there! I wish I could tag ppl in these post! I'll send a link to a friend that I know has a set that works cause he's on cm 11 now and it all works for him!
Sent from my SCH-R970 using Tapatalk

MMS Fix:
Name- Sprint
APN- cinet.spcs
Proxy-
Port-
Username- none
Password- ****
Server- *
MMSC- http://mms.sprintpcs.com/
MMS Proxy- 68.28.31.7
MMS Port- 80
MCC- 310
MNC- 120
Authentication Type-
APN Type- default,mms
APN Protocol- IPv4
Those are the ones I've been using.
I have MMS on data but not WiFi.
I read an article that MMS is always data and even on WiFi if you send a MMS it hands off to data and right back to WiFi. It seems that the AOSP has a hand off issue. So if I need to send MMS I just toggle off the WiFi.
Running ProBam 4.4 hope this helps
Sent from my SPH-L720 using Tapatalk

Try switching network modes. Also use Sim toolkit and reset the applet. If you have a good backup of efs, restore that too
Sent from my SCH-R970 using Tapatalk

@bignick1215 tagging works
Sent from my Nexus 7 using XDA Premium 4 mobile app

Very nice!! For some reason I kept treating it like fb and never put the @ in front of it! Face palm..
Sent from my SCH-R970 using Tapatalk

Update
I spoke with Sprint at a local store as well as customer service on the phone and got no solutions. I have return the rom back to stock or find another rom with Sprint APN settings built in. I still can't seem the right settings for Sprint. If anyone can provide a link, please do so. Thanks.

Update - data works :d
Just thought I would share with you guys that I fixed my data and retained my calling and texting on Sprint.
Solution:
1. Download APN Shortcut from the Play Store and install it.
2. Open APN Shortcut and tap the menu button and select "Reset to default".
3. Now select "Sprint LTE internet" with the subtitle "n.ispsn"
4. (Optional) Enable mobile data in main settings menu if you haven't already.
5. Try going on the Internet now with your favorite browser of choice.
6. If it doesn't work select EHRPD Internet if that failed.
Enjoy

[Q] LS980 No 3g data on AOSP ROMs

Hello!
I have Sprint LS980 flashed to Intertelecom Ukraine (EVDO Rev. A) by the NVram.
The problem is that i don't have 3g data connection on AOSP roms, it's just not connecting.
I have data on every stock base Rom and Omni Rom.
Any ideas? Thanks!

Same here. Just flashed my first AOSP ROM (Carbon) and I'm getting 1X instead of 3G at home. Is there a way to update PRL or Profile maybe? Thought it was a ROM specific issue.

Tried to edit build.prop but get no luck to get data work.

Check apn settings
Sent from my LG G2 running Dirty Unicorns!

fma965 said:
Check apn settings
Sent from my LG G2 running Dirty Unicorns!
Click to expand...
Click to collapse
Would be gladly do it if you provide me some "How to", because i can't get APN config and all APN app crashes.
Thanks!

jsergan said:
Would be gladly do it if you provide me some "How to", because i can't get APN config and all APN app crashes.
Thanks!
Click to expand...
Click to collapse
What? Just go to settings > mobile networks > access point names

fma965 said:
What? Just go to settings > mobile networks > access point names
Click to expand...
Click to collapse
Unfortunately on some ROM it's not active , on other one there is no such pass. When i use aps that open that setting aps crashes.
Always thought that NV programmed phones have no need in APNs.
Thank you for trying to help me!

jsergan said:
Unfortunately on some ROM it's not active , on other one there is no such pass. When i use aps that open that setting aps crashes.
Always thought that NV programmed phones have no need in APNs.
Thank you for trying to help me!
Click to expand...
Click to collapse
so im assuming this phone is CDMA? i don;t know as im british so i don't have all this complicated stuff and simply just buy a GSM phone and it works on every network. I am just basing my answers on my on phone.

fma965 said:
so im assuming this phone is CDMA? i don;t know as im british so i don't have all this complicated stuff and simply just buy a GSM phone and it works on every network. I am just basing my answers on my on phone.
Click to expand...
Click to collapse
Yep, it's really a CDMA operator (EVDO rev. A is CDMA) and LS980 is Sprint version of LG G2.
And everything you wrote will work on GSM, but any way thank you for trying to help!

jsergan said:
Yep, it's really a CDMA operator (EVDO rev. A is CDMA) and LS980 is Sprint version of LG G2.
And everything you wrote will work on GSM, but any way thank you for trying to help!
Click to expand...
Click to collapse
Ok so for my confusion, And thanks for not being rude about it like a lot of people would.

[Q] Change/APN Settings?

I just recently returned my VZW Galaxy Note 3 to stock and updated to 4.4.4 I'm trying to edit or add a new APN in my phone settings but the "add" button on the APN screen is grayed out. Do I need root access to do this? I never have before. Or am I just missing something obvious?
Thanks in advance!

DJ0224 said:
I just recently returned my VZW Galaxy Note 3 to stock and updated to 4.4.4 I'm trying to edit or add a new APN in my phone settings but the "add" button on the APN screen is grayed out. Do I need root access to do this? I never have before. Or am I just missing something obvious?
Thanks in advance!
Click to expand...
Click to collapse
You would need a non-verizon SIM inserted in order to edit the APN. I just verified this by inserting a Straight Talk SIM in my Note 3. ON VZW the add button is grayed but active with the Straight Talk SIM.

BladeRunner said:
You would need a non-verizon SIM inserted in order to edit the APN. I just verified this by inserting a Straight Talk SIM in my Note 3. ON VZW the add button is grayed but active with the Straight Talk SIM.
Click to expand...
Click to collapse
So if I just pop a sim in there it will allow me to add a new APN? I want to just copy the verizon APN and add a few things so I can use adblock without rooting my phone.

DJ0224 said:
So if I just pop a sim in there it will allow me to add a new APN? I want to just copy the verizon APN and add a few things so I can use adblock without rooting my phone.
Click to expand...
Click to collapse
correct, afaik
---------- Post added at 05:21 PM ---------- Previous post was at 05:19 PM ----------
DJ0224 said:
So if I just pop a sim in there it will allow me to add a new APN? I want to just copy the verizon APN and add a few things so I can use adblock without rooting my phone.
Click to expand...
Click to collapse
What are you trying to edit in APN, because there are some fields in the VZW apn that you can edit already.

BladeRunner said:
You would need a non-verizon SIM inserted in order to edit the APN. I just verified this by inserting a Straight Talk SIM in my Note 3. ON VZW the add button is grayed but active with the Straight Talk SIM.
Click to expand...
Click to collapse
BladeRunner said:
correct, afaik
---------- Post added at 05:21 PM ---------- Previous post was at 05:19 PM ----------
What are you trying to edit in APN, because there are some fields in the VZW apn that you can edit already.
Click to expand...
Click to collapse
The proxy and the port number. I'll actually try that now see if it lets me.

Freedompop N900P help

Hi all,
I have a freedompop ( they use sprints network) Note 3 N900P. Since the phone uses the sprints network indirectly, I am not sure which roms I will be able to install. Also the phone comes with lollipop; can i use the cf-root app? It says that it only supports the 4.4 bootloader, but the phone is running 5.0.(not sure if the bootloader was updated).
I would like your advice.
Thanks in advance

The Faqs show that phone as a Sprint model so i would expect the Sprint forum to have the answers .

JJEgan said:
The Faqs show that phone as a Sprint model so i would expect the Sprint forum to have the answers .
Click to expand...
Click to collapse
No one replied; I can confirm that it already has twrp installed. The only thing I am curious about is if the roms in the general note 3 threads will be compatible.

USUALLY any non-exynos rom will work. I'm on ringplus. I just add my APN and done. Tried using Music of life LP rom, though that one is tricky to add apn because it's greyed out with the SPR csc. Use the XAS csc to get apn to work. I'm now using darkera13's s7 edge port which gave me no problems editing my APN. I'm assuming the s7 edge port in this forum might have a similar experience.
Oh and the sprint section was no help for me. I had to figure it out on my own.

darksavior said:
USUALLY any non-exynos rom will work. I'm on ringplus. I just add my APN and done. Tried using Music of life LP rom, though that one is tricky to add apn because it's greyed out with the SPR csc. Use the XAS csc to get apn to work. I'm now using darkera13's s7 edge port which gave me no problems editing my APN. I'm assuming the s7 edge port in this forum might have a similar experience.
Oh and the sprint section was no help for me. I had to figure it out on my own.
Click to expand...
Click to collapse
are you able to update the prl while on the custom roms?

itouchables said:
are you able to update the prl while on the custom roms?
Click to expand...
Click to collapse
No, I never could. For that you'll have to try sprint-based roms. Personally, I've gotten a signal just fine without updating prl.

darksavior said:
No, I never could. For that you'll have to try sprint-based roms. Personally, I've gotten a signal just fine without updating prl.
Click to expand...
Click to collapse
i have Sprint phone, i installed Darklord full N5 UX N920KKKU2ZPF4 or S7 Edge.PEK port 6.0.1 (MM) , work fine in europe just 4G not work
Have you any idea?
Best Regards

walidham said:
i have Sprint phone, i installed Darklord full N5 UX N920KKKU2ZPF4 or S7 Edge.PEK port 6.0.1 (MM) , work fine in europe just 4G not work
Have you any idea?
Best Regards
Click to expand...
Click to collapse
Probably APN. Find out what your cell provider's APN settings are and make your own.

darksavior said:
Probably APN. Find out what your cell provider's APN settings are and make your own.
Click to expand...
Click to collapse
The phone get APN form provider, also i added it manually, but can't get 4G.
I think the problem, is that the phone is sprint and 4G work only in USA, right ?

walidham said:
The phone get APN form provider, also i added it manually, but can't get 4G.
I think the problem, is that the phone is sprint and 4G work only in USA, right ?
Click to expand...
Click to collapse
oh right you're not in the US. If the bands aren't supported then you won't get the data. I don't believe a cdma phone was the right choice to use outside the US. Have better odds using a gsm phone.

AT&T & T-mobile now have the same bootloader version

*I originally posted this in the AT&T S7 forums unintentionally so posting here as well*
For those of you curious about running the T-mobile firmware on the AT&T version of the edge, it is now possible since they are now using the same bootloader version.
I have an AT&T S7 edge (SM-935A) and recently switched to T-mobile as my carrier. I had to unlock it first so I used the service from unlockunit. It took almost a day for the code but I was then able to pop my T-mobile SIM and sure enough, it worked. Surprisingly, WIFI calling even worked!
At this point, I really wanted to switch to the 935U firmware as I heard it has great battery life as all the carrier bloat is removed. Unfortunately, just before I switched, the recent September update from AT&T raised the bootloader to v4. I learned after the fact you have to disable the update service as it eventually will force you to update. Now I was stuck with the damn AT&T firmware!
I wanted to flash the 935U firmware but the bootloader was still at v2 and T-mobile, so I thought, was at v3. It might be helpful to have a sticky on this forum with the current bootloader versions as it took some time for me to research the following:
AT&T - v4
T-mobile - v4
Verison - v4
Sprint - v2?
Universal - v2
Yes, you read that right, T-mobile just released a new firmware (PIA) which raised their bootloader to v4! You can grab it here: http://www.sammobile.com/firmwares/database/SM-G935T/
It's the one with the date of 2016-09-27. I used the prince odin version referenced in this thread for flashing as others failed and gave sha1 errors. http://forum.xda-developers.com/veri...g930v-t3411015
If you plan to do this please research how to flash with odin and remember to back everything up! Samsung Smart Switch is a great resource for this.
I've been running on the new T-mobile firmware for just a day but already like it better than AT&T's. I didn't even know AT&T disabled some features of the S7 edge that other carriers kept. Typical for the Deathstar. Can you sense my disdain for AT&T?
For example, with the T-mobile firmware, you can control Download booster (the ability to leverage wifi and LTE simultaneously!) This option was removed from the AT&T firmware. In addition, you can set a preference to WiFi calling. With the AT&T firmware, you have no control and it will only flip to WiFI when in a weak area. It just so happens where I live the AT&T signal is weak so I was always jumping back and forth between the two and it was frustrating not being able to control it. The only way to force WiFi calling is turn on airplane mode when in a fringe area and turn WiFI back on. I'm so glad I don't have to deal with that anymore.
I'm including some screenshots which show the current firmware running on my SM-935A.
Hopefully we'll see an update to the 935U bootloader to v4 which will allow a switch to that firmware.

Thanks for the info.
Sent from my SAMSUNG-SM-G935A using Tapatalk

Benefit of T-Mobile firmware besides the ones stated. I am on the U firmware. Should I stay or switch to t-MObile.

How did you get to send mms on the u firmware i havent been able to.
---------- Post added at 09:11 PM ---------- Previous post was at 09:10 PM ----------
marcusva79 said:
Benefit of T-Mobile firmware besides the ones stated. I am on the U firmware. Should I stay or switch to t-MObile.
Click to expand...
Click to collapse
did you get the send mms working on u firmware?

So would it be possible to use the t-mobile firmware and still be on ATT or no?
Sent from my SAMSUNG-SM-G935A using XDA-Developers mobile app

burna said:
How did you get to send mms on the u firmware i havent been able to.
---------- Post added at 09:11 PM ---------- Previous post was at 09:10 PM ----------
did you get the send mms working on u firmware?
Click to expand...
Click to collapse
Looks fine here. I'll do it again
Edit: Sent myself to another MMS and it works fine.
Sent from my SM-G935U using Tapatalk

marcusva79 said:
Looks fine here. I'll do it again
Edit: Sent myself to another MMS and it works fine.
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
yes question is how or what you do to be able to send mms. Thanks

Press the pin icon in messenge app and attach the picture and send away.
Sent from my SM-G935U using Tapatalk

marcusva79 said:
Press the pin icon in messenge app and attach the picture and send away.
Click to expand...
Click to collapse
no sorry im not clear on what im asking lol. im on (U)firmware but i cant send mms and my ims is not registered. if i go back to (A)firmware everything works fine. so the question is first do you have an origianl att phone? and second if so when you flashed the u firm ware did your mms work or did you alter something to get mms working.

My question is if i remain on att and run the tmobile firmware will the wifi calling work?
---------- Post added at 07:53 AM ---------- Previous post was at 07:50 AM ----------
Also, is the root method the same and does it still work with new v4 bootloader?

burna said:
no sorry im not clear on what im asking lol. im on (U)firmware but i cant send mms and my ims is not registered. if i go back to (A)firmware everything works fine. so the question is first do you have an origianl att phone? and second if so when you flashed the u firm ware did your mms work or did you alter something to get mms working.
Click to expand...
Click to collapse
I didnt do anything it work right out of the box. I am on the ATT variant of S7 edge and mms works fine. I havent rooted and will never root this phone. Only thing not working is VOLte, Wifi Calling, and visual voicemail. lve been a nexus user so im used no biggie on them. Have you alter anything? Using any other messaging apk?

marcusva79 said:
I didnt do anything it work right out of the box. I am on the ATT variant of S7 edge and mms works fine. I havent rooted and will never root this phone. Only thing not working is VOLte, Wifi Calling, and visual voicemail. lve been a nexus user so im used no biggie on them. Have you alter anything? Using any other messaging apk?
Click to expand...
Click to collapse
oh ok you arent rooted thats the big missing link lol , im rooted on att variant but have u firmware. sorry thought you were rooted and on u firmware.

So, it sounds like you're saying we can use ATT WIFI Calling after flashing the G930T firmware? Is there anything you lose from G930T? HD Calling for example? Anything else?
Edit: I said 930 because I followed a link here from the 930 forums - I assume it would be the same for the 935, but I'd like to know how it worked on the 935 too.

What are the benefits with the TMOBILE firmware?
Sent from my SM-G935U using Tapatalk

So anybody try t-mobile firmware on att? And does WiFi calling, and volte work ?
Sent from my SM-G935U using Tapatalk

waiting on the same question
dogredwing1 said:
So anybody try t-mobile firmware on att? And does WiFi calling, and volte work ?
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse

It has been written elsewhere that AT&T requires 1) proprietary code [read: ATT ROM] and 2) AT&T-branded phones (IMEI they recognize, also includes some non-ATT such as iPhone/HTC) for advanced calling features to work.
I would bet that VoLTE, WiFi calling, video calling, advanced messaging, etc. do not work with the T-Mo ROM.
On the other hand T-Mo uses more standard VoLTE protocols, etc., so phones like Nexus 6P, 5X, etc. work with VoLTE and WiFi calling just fine on T-Mo.
A bit of history: Even people who got ATT-branded Nexus 6 do not get VoLTE because Google later standardized the N6 ROM therefore without ATT's evil code (and bloat).
ATT has quickly surpassed VZ as the new Evil Empire.

ctalbot said:
I used the prince odin version referenced in this thread for flashing as others failed and gave sha1 errors. http://forum.xda-developers.com/veri...g930v-t3411015
Click to expand...
Click to collapse
I'm getting a dead link, can anybody let me know which prince odin version he was referring to?
EDIT: Nvm got it!

theoddjosh said:
I'm getting a dead link, can anybody let me know which prince odin version he was referring to?
EDIT: Nvm got it!
Click to expand...
Click to collapse
Where did you find the solution, I've tried a couple different versions of odin and no luck. Also, should I be using the "CSC" or "HOME_CSC" in the CSC box?
EDIT: Also figured it out. search for "Verizon S7 / S7 Edge [Root Guide] SM-G930V SM-G935V [NO KNOX TRIP]" in xda to find the correct ODIN version for this.
and the correct file to use in the CSC field is "CSC" even though ODIN says to use the "HOME_CSC"

Do I need to enable OEM unlock?