Hello!
I have Sprint LS980 flashed to Intertelecom Ukraine (EVDO Rev. A) by the NVram.
The problem is that i don't have 3g data connection on AOSP roms, it's just not connecting.
I have data on every stock base Rom and Omni Rom.
Any ideas? Thanks!
Same here. Just flashed my first AOSP ROM (Carbon) and I'm getting 1X instead of 3G at home. Is there a way to update PRL or Profile maybe? Thought it was a ROM specific issue.
Tried to edit build.prop but get no luck to get data work.
Check apn settings
Sent from my LG G2 running Dirty Unicorns!
fma965 said:
Check apn settings
Sent from my LG G2 running Dirty Unicorns!
Click to expand...
Click to collapse
Would be gladly do it if you provide me some "How to", because i can't get APN config and all APN app crashes.
Thanks!
jsergan said:
Would be gladly do it if you provide me some "How to", because i can't get APN config and all APN app crashes.
Thanks!
Click to expand...
Click to collapse
What? Just go to settings > mobile networks > access point names
fma965 said:
What? Just go to settings > mobile networks > access point names
Click to expand...
Click to collapse
Unfortunately on some ROM it's not active , on other one there is no such pass. When i use aps that open that setting aps crashes.
Always thought that NV programmed phones have no need in APNs.
Thank you for trying to help me!
jsergan said:
Unfortunately on some ROM it's not active , on other one there is no such pass. When i use aps that open that setting aps crashes.
Always thought that NV programmed phones have no need in APNs.
Thank you for trying to help me!
Click to expand...
Click to collapse
so im assuming this phone is CDMA? i don;t know as im british so i don't have all this complicated stuff and simply just buy a GSM phone and it works on every network. I am just basing my answers on my on phone.
fma965 said:
so im assuming this phone is CDMA? i don;t know as im british so i don't have all this complicated stuff and simply just buy a GSM phone and it works on every network. I am just basing my answers on my on phone.
Click to expand...
Click to collapse
Yep, it's really a CDMA operator (EVDO rev. A is CDMA) and LS980 is Sprint version of LG G2.
And everything you wrote will work on GSM, but any way thank you for trying to help!
jsergan said:
Yep, it's really a CDMA operator (EVDO rev. A is CDMA) and LS980 is Sprint version of LG G2.
And everything you wrote will work on GSM, but any way thank you for trying to help!
Click to expand...
Click to collapse
Ok so for my confusion, And thanks for not being rude about it like a lot of people would.
Related
Hello. I flashed a Sprint LG G2 to PagePlus. The Flash goes well and All my items stick. But the problem is the connection is unstable. I'm noticed with both the LS970 and LS980 the same problem happens. The mobile data will first connect with 1x then to Evdo. Then the network will disconnect. I flash phones to pageplus all the time and they all have 3G - EVDO. But the unstable 3G is crazy. It will not stay connected. Why are the new LG phones like this? Has anyone encountered this problem and found a solution? I look forward to people's reply because I know a lot of people have run into this problem. Thanks in advanced.
Spelunker10 said:
Hello. I flashed a Sprint LG G2 to PagePlus. The Flash goes well and All my items stick. But the problem is the connection is unstable. I'm noticed with both the LS970 and LS980 the same problem happens. The mobile data will first connect with 1x then to Evdo. Then the network will disconnect. I flash phones to pageplus all the time and they all have 3G - EVDO. But the unstable 3G is crazy. It will not stay connected. Why are the new LG phones like this? Has anyone encountered this problem and found a solution? I look forward to people's reply because I know a lot of people have run into this problem. Thanks in advanced.
Click to expand...
Click to collapse
Hello spelunker10, can the Verizon LG G2 be put on pageplus also?
nas529 said:
Hello spelunker10, can the Verizon LG G2 be put on pageplus also?
Click to expand...
Click to collapse
Hello. Absolutely! That's my personal phone! Just make sure when you flash it, you leave the SIM card in the phone. 3g data works, mms, etc. Good luck.
I have a VZW G2, and want tot ale mine to page plus but I can't find info on flashing anywhere... Can you direct me?
colorsnet said:
I have a VZW G2, and want tot ale mine to page plus but I can't find info on flashing anywhere... Can you direct me?
Click to expand...
Click to collapse
The flashing method is same for all phones. Doesn't matter what kind. I'll give you a good starting place. Viper32 has a forum on here helping people with flashing. And there are plenty of forums with a ton of info. Good luck.
this g2 has been a nightmare for me. i have gotten used to samsung just flash and forget about it, only thing break flash on them is ota. this g2 though..... :/
I'm having same issue. unstable 3g
Sprint probs
What happened with mines is similar but I had the att variant
So I flashed mime to sprint and it worked but only on their 1x network and 3g towers in order for 4g to work and there new spark network I had to get a Sim card and pop it in and boom 4g LTE worked the sec I put it in
You can flash a gsm phone to cdma?
Sent from my SCH-I545 using Tapatalk
More info in the thread. http://forum.xda-developers.com/showthread.php?t=2360776 We got it worked out.
Any issues with losing call history at all, after flashing it to PagePlus?
gadgetdaddy said:
Any issues with losing call history at all, after flashing it to PagePlus?
Click to expand...
Click to collapse
No. Call history has nothing to do with flashing. The only way you can lose call history is if you factory reset the phone or you personally delete the call history yourself.
Spelunker10 said:
No. Call history has nothing to do with flashing. The only way you can lose call history is if you factory reset the phone or you personally delete the call history yourself.
Click to expand...
Click to collapse
Actually its a known issue with this phone, that it looses its call history when flashed.
It has something to do with the Stock ROM release
I have the same issue.
Also I get a "MIP : 89" error sometimes.
Also, I have a system update downloaded waiting to install but not sure if it'll kill my flash so I've been scared to hit the button.
loveandhate said:
I have the same issue.
Also I get a "MIP : 89" error sometimes.
Also, I have a system update downloaded waiting to install but not sure if it'll kill my flash so I've been scared to hit the button.
Click to expand...
Click to collapse
Is your phone the LS980? I had a customer who updated his LS980 this past week and I had to re-flash his phone. You'll probably have to re-flash as well.
3G doesnt stick
Spelunker10 said:
More info in the thread. http://forum.xda-developers.com/showthread.php?t=2360776 We got it worked out.
Click to expand...
Click to collapse
whats up Spelunker10
did you figure out! how to make the 3G stick on the LG G2 please need your help flashed like 10 different ways but still stuck on 1X
nexio said:
whats up Spelunker10
did you figure out! how to make the 3G stick on the LG G2 please need your help flashed like 10 different ways but still stuck on 1X
Click to expand...
Click to collapse
I did. What android version are you running?
Spelunker10 said:
I did. What android version are you running?
Click to expand...
Click to collapse
A custom rom 4.4.2 and thank you for answering back to me
nexio said:
A custom rom 4.4.2 and thank you for answering back to me
Click to expand...
Click to collapse
I bet I know what your missing. Did you flash the custom nv file?
Spelunker10 said:
I bet I know what your missing. Did you flash the custom nv file?
Click to expand...
Click to collapse
Which Custom nv files? Do you mean the ones from cama workshop
nexio said:
Which Custom nv files? Do you mean the ones from cama workshop
Click to expand...
Click to collapse
Yes you flash it in CDMA workshop under the Memory Tab. Did you flash this file?
Hi guys I am requesting a little bit of help. Ihad a s4 canadian variant ,tried many custom roms but still having trouble with 4g lte. I had the correct apn's but in "about device" i reached only HSPA or HSPA+ .mY device is unlocked and I"m using ATT service.Also I tried to flash another modem but It didn't change and I don't know why. I'm running on mk6 stock one.My rom right know is a based canadian one maple leaf I had installed xposed , wanam and many other addsand I had Philz recovery instelled. Am I missing something else? WHat I did wrong or what's steps I had to do to finish my Job..?>
thank's alot for your help!!!
cjoel37 said:
Hi guys I am requesting a little bit of help. Ihad a s4 canadian variant ,tried many custom roms but still having trouble with 4g lte. I had the correct apn's but in "about device" i reached only HSPA or HSPA+ .mY device is unlocked and I"m using ATT service.Also I tried to flash another modem but It didn't change and I don't know why. I'm running on mk6 stock one.My rom right know is a based canadian one maple leaf I had installed xposed , wanam and many other addsand I had Philz recovery instelled. Am I missing something else? WHat I did wrong or what's steps I had to do to finish my Job..?>
thank's alot for your help!!!
Click to expand...
Click to collapse
Make sure you have an ATT APN and the correct network mode selected, LTE/GSM/WCDMA
899289
L Chupacabra said:
Make sure you have an ATT APN and the correct network mode selected, LTE/GSM/WCDMA
I already check it and have the same problem. It don't run 4g lte.
Click to expand...
Click to collapse
cjoel37 said:
L Chupacabra said:
Make sure you have an ATT APN and the correct network mode selected, LTE/GSM/WCDMA
I already check it and have the same problem. It don't run 4g lte.
Click to expand...
Click to collapse
Are you sure you are in an LTE area?
Click to expand...
Click to collapse
L Chupacabra said:
cjoel37 said:
Are you sure you are in an LTE area?
Click to expand...
Click to collapse
Yes I have cause I had net 10 before and It worked 4g lte .I had changed because most people said that ATT is the quickest network and probably is but you have to use their own machines.they said,... I flashed original stock tar to start it fresh to see if there was some trouble when I flashe custom roms I will use triangle apk app to reset counter to 0 and start it over once I root again my machine. I will keep in contact thanks!!
Click to expand...
Click to collapse
cjoel37 said:
L Chupacabra said:
Yes I have cause I had net 10 before and It worked 4g lte .I had changed because most people said that ATT is the quickest network and probably is but you have to use their own machines.they said,... I flashed original stock tar to start it fresh to see if there was some trouble when I flashe custom roms I will use triangle apk app to reset counter to 0 and start it over once I root again my machine. I will keep in contact thanks!!
Click to expand...
Click to collapse
Dial:
*#*#4636#*#*
Set preferred network type to LTE/GSM
Click to expand...
Click to collapse
Hi all,
I have a freedompop ( they use sprints network) Note 3 N900P. Since the phone uses the sprints network indirectly, I am not sure which roms I will be able to install. Also the phone comes with lollipop; can i use the cf-root app? It says that it only supports the 4.4 bootloader, but the phone is running 5.0.(not sure if the bootloader was updated).
I would like your advice.
Thanks in advance
The Faqs show that phone as a Sprint model so i would expect the Sprint forum to have the answers .
JJEgan said:
The Faqs show that phone as a Sprint model so i would expect the Sprint forum to have the answers .
Click to expand...
Click to collapse
No one replied; I can confirm that it already has twrp installed. The only thing I am curious about is if the roms in the general note 3 threads will be compatible.
USUALLY any non-exynos rom will work. I'm on ringplus. I just add my APN and done. Tried using Music of life LP rom, though that one is tricky to add apn because it's greyed out with the SPR csc. Use the XAS csc to get apn to work. I'm now using darkera13's s7 edge port which gave me no problems editing my APN. I'm assuming the s7 edge port in this forum might have a similar experience.
Oh and the sprint section was no help for me. I had to figure it out on my own.
darksavior said:
USUALLY any non-exynos rom will work. I'm on ringplus. I just add my APN and done. Tried using Music of life LP rom, though that one is tricky to add apn because it's greyed out with the SPR csc. Use the XAS csc to get apn to work. I'm now using darkera13's s7 edge port which gave me no problems editing my APN. I'm assuming the s7 edge port in this forum might have a similar experience.
Oh and the sprint section was no help for me. I had to figure it out on my own.
Click to expand...
Click to collapse
are you able to update the prl while on the custom roms?
itouchables said:
are you able to update the prl while on the custom roms?
Click to expand...
Click to collapse
No, I never could. For that you'll have to try sprint-based roms. Personally, I've gotten a signal just fine without updating prl.
darksavior said:
No, I never could. For that you'll have to try sprint-based roms. Personally, I've gotten a signal just fine without updating prl.
Click to expand...
Click to collapse
i have Sprint phone, i installed Darklord full N5 UX N920KKKU2ZPF4 or S7 Edge.PEK port 6.0.1 (MM) , work fine in europe just 4G not work
Have you any idea?
Best Regards
walidham said:
i have Sprint phone, i installed Darklord full N5 UX N920KKKU2ZPF4 or S7 Edge.PEK port 6.0.1 (MM) , work fine in europe just 4G not work
Have you any idea?
Best Regards
Click to expand...
Click to collapse
Probably APN. Find out what your cell provider's APN settings are and make your own.
darksavior said:
Probably APN. Find out what your cell provider's APN settings are and make your own.
Click to expand...
Click to collapse
The phone get APN form provider, also i added it manually, but can't get 4G.
I think the problem, is that the phone is sprint and 4G work only in USA, right ?
walidham said:
The phone get APN form provider, also i added it manually, but can't get 4G.
I think the problem, is that the phone is sprint and 4G work only in USA, right ?
Click to expand...
Click to collapse
oh right you're not in the US. If the bands aren't supported then you won't get the data. I don't believe a cdma phone was the right choice to use outside the US. Have better odds using a gsm phone.
I am running an old CM 10.2.1 rom and need to update my phone's PRL. I may plan a trip to Canada and need to make sure my phone will work. Though my ROM is old, what is the procedure for updating PRL?
Make a backup of your custom ROM then flash a TW based ROM. Update your prl then restore your CM ROM.
Beezer80 said:
Make a backup of your custom ROM then flash a TW based ROM. Update your prl then restore your CM ROM.
Click to expand...
Click to collapse
Once abroad , what mode do I need to put my phone in for international service? Do I use the "system select mode" under mobile networks, change to auto International roaming?
jp0213x said:
Once abroad , what mode do I need to put my phone in for international service? Do I use the "system select mode" under mobile networks, change to auto International roaming?
Click to expand...
Click to collapse
That sounds correct. Preferred Network Type = Global
Beezer80 said:
That sounds correct. Preferred Network Type = Global
Click to expand...
Click to collapse
Thanks
jp0213x said:
Thanks
Click to expand...
Click to collapse
Update,
Was in Canada over the weekend and found out this ROM doesn't work at all for international roaming. Signal on the phone was very poor and the phone couldn't access the web. I did update the PRL before leaving. I had to restore my phone back to stock in order to use. Anyone have any luck using a custom that works well international roaming?
jp0213x said:
Update,
Was in Canada over the weekend and found out this ROM doesn't work at all for international roaming. Signal on the phone was very poor and the phone couldn't access the web. I did update the PRL before leaving. I had to restore my phone back to stock in order to use. Anyone have any luck using a custom that works well international roaming?
Click to expand...
Click to collapse
PRLs won't do anything for international roaming unless your phone supports the bands those carriers use
I have an s4 and it roamed fine on Rogers network under my stock firmware. Didn't work well with the custom rom.
jp0213x said:
I have an s4 and it roamed fine on Rogers network under my stock firmware. Didn't work well with the custom rom.
Click to expand...
Click to collapse
Weird, if you're on stock, then update PRL, and then flash custom ROM it should carry over
mattzeller said:
Weird, if you're on stock, then update PRL, and then flash custom ROM it should carry over
Click to expand...
Click to collapse
Signal was non existent few calls came through just about it. No web access.
jp0213x said:
Signal was non existent few calls came through just about it. No web access.
Click to expand...
Click to collapse
Maybe an APN issue
So i've got a L720 that i've rooted, unlocked, and flashed CM12.1 snapshot, I flashed NAE baseband after unlocking and all is well, however I'd like to be able to use CM13, but every time that i flash either a nightly, or JDCTeam's optimized CM13 (which is what i'd prefer to use if a solution is available), It forces LTE/CDMA (auto) in the *#*#4636#*#* menu, if i pick GSM/WCDMA and reboot it just goes back to LTE/CDMA (auto) and i have no idea how to make it work, if there is even a way, does the GSM unlock not stick on 6.0.1 ROMs?
Thanks for any help you can give me :/
ThOnly1Lft said:
So i've got a L720 that i've rooted, unlocked, and flashed CM12.1 snapshot, I flashed NAE baseband after unlocking and all is well, however I'd like to be able to use CM13, but every time that i flash either a nightly, or JDCTeam's optimized CM13 (which is what i'd prefer to use if a solution is available), It forces LTE/CDMA (auto) in the *#*#4636#*#* menu, if i pick GSM/WCDMA and reboot it just goes back to LTE/CDMA (auto) and i have no idea how to make it work, if there is even a way, does the GSM unlock not stick on 6.0.1 ROMs?
Thanks for any help you can give me :/
Click to expand...
Click to collapse
Who is your carrier? You're going to need to flash an APN fix for your carrier to get proper data working.
Sent from my SCH-R220
mattzeller said:
Who is your carrier? You're going to need to flash an APN fix for your carrier to get proper data working.
Sent from my SCH-R220
Click to expand...
Click to collapse
MetroPCS is my carrier
ThOnly1Lft said:
MetroPCS is my carrier
Click to expand...
Click to collapse
You need to set your MetroPCS APNs to get data working,not sure if there is a flashable file, but google around
Sent from my SCH-R220
mattzeller said:
You need to set your MetroPCS APNs to get data working,not sure if there is a flashable file, but google around
Sent from my SCH-R220
Click to expand...
Click to collapse
I think you may be misunderstanding my issue or something.... When i flash a CM13 ROM i can't switch from LTE/CDMA mode to GSM/WCDMA mode in order to even get voice and texts... what will changing my APN do for that...?
ThOnly1Lft said:
I think you may be misunderstanding my issue or something.... When i flash a CM13 ROM i can't switch from LTE/CDMA mode to GSM/WCDMA mode in order to even get voice and texts... what will changing my APN do for that...?
Click to expand...
Click to collapse
Oh, I thought you were at least getting voice and SMS. Hmmm, I'm not too sure
Sent from my SCH-R220
mattzeller said:
Oh, I thought you were at least getting voice and SMS. Hmmm, I'm not too sure
Sent from my SCH-R220
Click to expand...
Click to collapse
deep sigh
ThOnly1Lft said:
deep sigh
Click to expand...
Click to collapse
That is the downside to making a non GSM phone work on a GSM network
Sent from my SCH-R220
mattzeller said:
That is the downside to making a non GSM phone work on a GSM network
Sent from my SCH-R220
Click to expand...
Click to collapse
Seems i may just be unable to use marshmallow ROMs and keep the GSM Unlock :/
Did anyone find a solution for this? I'm trying to use a Sprint Domestic Unlocked 720T with AT&T and running into the same issue. Cannot select GSM at all, no matter where (network mode shows -1). I've tried different modems, build.prop, hidden menus, etc. No GSM on the cm13 for the 720t??
blazie151 said:
Did anyone find a solution for this? I'm trying to use a Sprint Domestic Unlocked 720T with AT&T and running into the same issue. Cannot select GSM at all, no matter where (network mode shows -1). I've tried different modems, build.prop, hidden menus, etc. No GSM on the cm13 for the 720t??
Click to expand...
Click to collapse
Looks like we may be stuck on CM12 or LP based custom ROMs my friend
To be perfectly honest, you're not missing out on anything, having run the same ROM of LP and of MM, there is no real difference in regards to performance and battery life.
Sent from my SPH-L720 using Tapatalk
This is really sad... I've spent 3 days flashing various modems and can't find nothing. Though, I'd point out my LP kinda behaves same as my M, when it's done loading apps after flashing, it ask to insert simcard (same like my M), but then I go change the network type to 3g and network returns on the phone. Tried with cm13 but nothing, does anyone know what could be wrong??
my L720 detect sim but signal not work