Hi all,
I have a freedompop ( they use sprints network) Note 3 N900P. Since the phone uses the sprints network indirectly, I am not sure which roms I will be able to install. Also the phone comes with lollipop; can i use the cf-root app? It says that it only supports the 4.4 bootloader, but the phone is running 5.0.(not sure if the bootloader was updated).
I would like your advice.
Thanks in advance
The Faqs show that phone as a Sprint model so i would expect the Sprint forum to have the answers .
JJEgan said:
The Faqs show that phone as a Sprint model so i would expect the Sprint forum to have the answers .
Click to expand...
Click to collapse
No one replied; I can confirm that it already has twrp installed. The only thing I am curious about is if the roms in the general note 3 threads will be compatible.
USUALLY any non-exynos rom will work. I'm on ringplus. I just add my APN and done. Tried using Music of life LP rom, though that one is tricky to add apn because it's greyed out with the SPR csc. Use the XAS csc to get apn to work. I'm now using darkera13's s7 edge port which gave me no problems editing my APN. I'm assuming the s7 edge port in this forum might have a similar experience.
Oh and the sprint section was no help for me. I had to figure it out on my own.
darksavior said:
USUALLY any non-exynos rom will work. I'm on ringplus. I just add my APN and done. Tried using Music of life LP rom, though that one is tricky to add apn because it's greyed out with the SPR csc. Use the XAS csc to get apn to work. I'm now using darkera13's s7 edge port which gave me no problems editing my APN. I'm assuming the s7 edge port in this forum might have a similar experience.
Oh and the sprint section was no help for me. I had to figure it out on my own.
Click to expand...
Click to collapse
are you able to update the prl while on the custom roms?
itouchables said:
are you able to update the prl while on the custom roms?
Click to expand...
Click to collapse
No, I never could. For that you'll have to try sprint-based roms. Personally, I've gotten a signal just fine without updating prl.
darksavior said:
No, I never could. For that you'll have to try sprint-based roms. Personally, I've gotten a signal just fine without updating prl.
Click to expand...
Click to collapse
i have Sprint phone, i installed Darklord full N5 UX N920KKKU2ZPF4 or S7 Edge.PEK port 6.0.1 (MM) , work fine in europe just 4G not work
Have you any idea?
Best Regards
walidham said:
i have Sprint phone, i installed Darklord full N5 UX N920KKKU2ZPF4 or S7 Edge.PEK port 6.0.1 (MM) , work fine in europe just 4G not work
Have you any idea?
Best Regards
Click to expand...
Click to collapse
Probably APN. Find out what your cell provider's APN settings are and make your own.
darksavior said:
Probably APN. Find out what your cell provider's APN settings are and make your own.
Click to expand...
Click to collapse
The phone get APN form provider, also i added it manually, but can't get 4G.
I think the problem, is that the phone is sprint and 4G work only in USA, right ?
walidham said:
The phone get APN form provider, also i added it manually, but can't get 4G.
I think the problem, is that the phone is sprint and 4G work only in USA, right ?
Click to expand...
Click to collapse
oh right you're not in the US. If the bands aren't supported then you won't get the data. I don't believe a cdma phone was the right choice to use outside the US. Have better odds using a gsm phone.
Related
Hello!
I have Sprint LS980 flashed to Intertelecom Ukraine (EVDO Rev. A) by the NVram.
The problem is that i don't have 3g data connection on AOSP roms, it's just not connecting.
I have data on every stock base Rom and Omni Rom.
Any ideas? Thanks!
Same here. Just flashed my first AOSP ROM (Carbon) and I'm getting 1X instead of 3G at home. Is there a way to update PRL or Profile maybe? Thought it was a ROM specific issue.
Tried to edit build.prop but get no luck to get data work.
Check apn settings
Sent from my LG G2 running Dirty Unicorns!
fma965 said:
Check apn settings
Sent from my LG G2 running Dirty Unicorns!
Click to expand...
Click to collapse
Would be gladly do it if you provide me some "How to", because i can't get APN config and all APN app crashes.
Thanks!
jsergan said:
Would be gladly do it if you provide me some "How to", because i can't get APN config and all APN app crashes.
Thanks!
Click to expand...
Click to collapse
What? Just go to settings > mobile networks > access point names
fma965 said:
What? Just go to settings > mobile networks > access point names
Click to expand...
Click to collapse
Unfortunately on some ROM it's not active , on other one there is no such pass. When i use aps that open that setting aps crashes.
Always thought that NV programmed phones have no need in APNs.
Thank you for trying to help me!
jsergan said:
Unfortunately on some ROM it's not active , on other one there is no such pass. When i use aps that open that setting aps crashes.
Always thought that NV programmed phones have no need in APNs.
Thank you for trying to help me!
Click to expand...
Click to collapse
so im assuming this phone is CDMA? i don;t know as im british so i don't have all this complicated stuff and simply just buy a GSM phone and it works on every network. I am just basing my answers on my on phone.
fma965 said:
so im assuming this phone is CDMA? i don;t know as im british so i don't have all this complicated stuff and simply just buy a GSM phone and it works on every network. I am just basing my answers on my on phone.
Click to expand...
Click to collapse
Yep, it's really a CDMA operator (EVDO rev. A is CDMA) and LS980 is Sprint version of LG G2.
And everything you wrote will work on GSM, but any way thank you for trying to help!
jsergan said:
Yep, it's really a CDMA operator (EVDO rev. A is CDMA) and LS980 is Sprint version of LG G2.
And everything you wrote will work on GSM, but any way thank you for trying to help!
Click to expand...
Click to collapse
Ok so for my confusion, And thanks for not being rude about it like a lot of people would.
Hi guys I am requesting a little bit of help. Ihad a s4 canadian variant ,tried many custom roms but still having trouble with 4g lte. I had the correct apn's but in "about device" i reached only HSPA or HSPA+ .mY device is unlocked and I"m using ATT service.Also I tried to flash another modem but It didn't change and I don't know why. I'm running on mk6 stock one.My rom right know is a based canadian one maple leaf I had installed xposed , wanam and many other addsand I had Philz recovery instelled. Am I missing something else? WHat I did wrong or what's steps I had to do to finish my Job..?>
thank's alot for your help!!!
cjoel37 said:
Hi guys I am requesting a little bit of help. Ihad a s4 canadian variant ,tried many custom roms but still having trouble with 4g lte. I had the correct apn's but in "about device" i reached only HSPA or HSPA+ .mY device is unlocked and I"m using ATT service.Also I tried to flash another modem but It didn't change and I don't know why. I'm running on mk6 stock one.My rom right know is a based canadian one maple leaf I had installed xposed , wanam and many other addsand I had Philz recovery instelled. Am I missing something else? WHat I did wrong or what's steps I had to do to finish my Job..?>
thank's alot for your help!!!
Click to expand...
Click to collapse
Make sure you have an ATT APN and the correct network mode selected, LTE/GSM/WCDMA
899289
L Chupacabra said:
Make sure you have an ATT APN and the correct network mode selected, LTE/GSM/WCDMA
I already check it and have the same problem. It don't run 4g lte.
Click to expand...
Click to collapse
cjoel37 said:
L Chupacabra said:
Make sure you have an ATT APN and the correct network mode selected, LTE/GSM/WCDMA
I already check it and have the same problem. It don't run 4g lte.
Click to expand...
Click to collapse
Are you sure you are in an LTE area?
Click to expand...
Click to collapse
L Chupacabra said:
cjoel37 said:
Are you sure you are in an LTE area?
Click to expand...
Click to collapse
Yes I have cause I had net 10 before and It worked 4g lte .I had changed because most people said that ATT is the quickest network and probably is but you have to use their own machines.they said,... I flashed original stock tar to start it fresh to see if there was some trouble when I flashe custom roms I will use triangle apk app to reset counter to 0 and start it over once I root again my machine. I will keep in contact thanks!!
Click to expand...
Click to collapse
cjoel37 said:
L Chupacabra said:
Yes I have cause I had net 10 before and It worked 4g lte .I had changed because most people said that ATT is the quickest network and probably is but you have to use their own machines.they said,... I flashed original stock tar to start it fresh to see if there was some trouble when I flashe custom roms I will use triangle apk app to reset counter to 0 and start it over once I root again my machine. I will keep in contact thanks!!
Click to expand...
Click to collapse
Dial:
*#*#4636#*#*
Set preferred network type to LTE/GSM
Click to expand...
Click to collapse
Anyone know which bands are supported by the VZW version? Is it only 2/3/4/5/13?
TIA
NM
jblazea50 said:
Anyone know which bands are supported by the VZW version? Is it only 2/3/4/5/13?
TIA
Click to expand...
Click to collapse
I just read about this. According to this review: http://www.pcmag.com/article2/0,2817,2500353,00.asp
"It (Verizon Wireless Samsung Galaxy S7) has LTE bands 2/3/4/5/7/8/13/18/19/20/38/39/40/41. Samsung unfortunately removed key LTE bands for the other major US carriers—12 for T-Mobile, 17 for AT&T, and 25 for Sprint—to make it difficult to use this model elsewhere."
I doubt it was Samsung that removed it - more likely, Verizon had them remove the others. Just a guess, tho.
Is there an ELI5 version of this thread? What is the importance of knowing which "bands" are supported?
UndeadCircus said:
Is there an ELI5 version of this thread? What is the importance of knowing which "bands" are supported?
Click to expand...
Click to collapse
Using the phone LTE in other carriers. Carriers 'own' certain frequency bands which are used to communicate with your phone. Your phone and the tower need to be able to use the same frequency band in order to communicate.
Most phones work on 2G/3G world wide (except on CDMA carriers like Verizon, generally most phones don't use the tech/frequencies for verzion nor would Verizon allow then on their 2G/3G bands of they did). But LTE is new enough that most phones don't support the 20 odd frequency ranges used (2G/3G use less then 10 combined for most of the world).
Sent from my E6683 using Tapatalk
BlackjackWidow said:
I doubt it was Samsung that removed it - more likely, Verizon had them remove the others. Just a guess, tho.
Click to expand...
Click to collapse
The modem supports all the bands, Verizon disables it in software. What a bummer! I will suggest you to buy G950U or US cellular model.
Or flash the firmware of the carrier you want to enable the modem which has been successfully posted on a few xda threads and other sites. All snapdragon us variants can be cross flashed.
gunz.jones said:
Or flash the firmware of the carrier you want to enable the modem which has been successfully posted on a few xda threads and other sites. All snapdragon us variants can be cross flashed.
Click to expand...
Click to collapse
You meant, if I flash those firmware on my Verizone S7, can I able to get LTE on my my mobile without any problem? please note am outside US and using efferent carrier sim.
Thanks in advance.
shakkirk said:
You meant, if I flash those firmware on my Verizone S7, can I able to get LTE on my my mobile without any problem? please note am outside US and using efferent carrier sim.
Thanks in advance.
Click to expand...
Click to collapse
Yes, AT&T bands are in that firmware, evoke TMO bands are in there. Most gsm carriers have all bands except Verizon and Sprint bands enabled
gunz.jones said:
Yes, AT&T bands are in that firmware, evoke TMO bands are in there. Most gsm carriers have all bands except Verizon and Sprint bands enabled
Click to expand...
Click to collapse
Sorry I am noob, can you please give me a step by step installation link?
Thanks in advance
shakkirk said:
Sorry I am noob, can you please give me a step by step installation link?
Thanks in advance
Click to expand...
Click to collapse
I don't have links to the firmware, I'm at work. If you look at updato.com you can find the latest for the g930a, or you could get the g930u nougat update. There are plenty of threads that work through Odin usage in each forum in the QA
att s8 question
gunz.jones said:
I don't have links to the firmware, I'm at work. If you look at updato.com you can find the latest for the g930a, or you could get the g930u nougat update. There are plenty of threads that work through Odin usage in each forum in the QA
Click to expand...
Click to collapse
do you know if an unlocked att s8 will work on page plus ? ( basicly Verizon ,same towers)
skindeep75 said:
do you know if an unlocked att s8 will work on page plus ? ( basicly Verizon ,same towers)
Click to expand...
Click to collapse
You'd have to check on the s8 forums. An s7 probably would as I think only the Sprint and tmo phones were simlocked. Not sure though as I've only had my ST phone and read the vzw phone being used on several carriers.
gunz.jones said:
You'd have to check on the s8 forums. An s7 probably would as I think only the Sprint and tmo phones were simlocked. Not sure though as I've only had my ST phone and read the vzw phone being used on several carriers.
Click to expand...
Click to collapse
just did a live chat with Samsung and they said an att unlocked s8 will work 100 percent with Verizon, heres to hoping shes right lol
gunz.jones said:
Or flash the firmware of the carrier you want to enable the modem which has been successfully posted on a few xda threads and other sites. All snapdragon us variants can be cross flashed.
Click to expand...
Click to collapse
So are you saying that the actual bands are software based not hardware based. So all we have todo is flash the right ENG and ROM and wala I have right radios for my carrier?? US Based.
Yes, flashing the fw of the carrier loads the correct radio drivers. The radios are hardware based, but locked down by what the firmware has the instructions to look for and run.
gunz.jones said:
Yes, flashing the fw of the carrier loads the correct radio drivers. The radios are hardware based, but locked down by what the firmware has the instructions to look for and run.
Click to expand...
Click to collapse
Great explanation, I’m new to this stuff - we all have to start somewhere right?
So is root required to flash? The reason I ask is that I’d like to buy an S7 but I want to be able to WiFi hotspot tether without carrier provisioning and some versions of the phone allow it while I’m pretty sure others block that (like att)...By the way do you know which version would be best to flash to for WiFi tethering and ALL LTE bands made available? Thanks!
charter3554 said:
Great explanation, I’m new to this stuff - we all have to start somewhere right?
So is root required to flash? The reason I ask is that I’d like to buy an S7 but I want to be able to WiFi hotspot tether without carrier provisioning and some versions of the phone allow it while I’m pretty sure others block that (like att)...By the way do you know which version would be best to flash to for WiFi tethering and ALL LTE bands made available? Thanks!
Click to expand...
Click to collapse
I use the hybrid rom that is loaded with vzw and debloated custom to my needs. It has tethering enabled. You'll just need to use root long enough to get the flashfire setup going and then once you're done it is unrooted. You'll have to check other threads regarding performance tweaks if you decide to stay rooted.
gunz.jones said:
Yes, flashing the fw of the carrier loads the correct radio drivers. The radios are hardware based, but locked down by what the firmware has the instructions to look for and run.
Click to expand...
Click to collapse
gunz.jones said:
I use the hybrid rom that is loaded with vzw and debloated custom to my needs. It has tethering enabled. You'll just need to use root long enough to get the flashfire setup going and then once you're done it is unrooted. You'll have to check other threads regarding performance tweaks if you decide to stay rooted.
Click to expand...
Click to collapse
I thought the bootloader was locked on the Verizon S7 which doesn't allow rooting?... So rooting actually is possible on the Verizon S7?
charter3554 said:
I thought the bootloader was locked on the Verizon S7 which doesn't allow rooting?... So rooting actually is possible on the Verizon S7?
Click to expand...
Click to collapse
Using the engineering kernel for nougat you can achieve toy, but it's buggy and slow since it wasn't meant to be used for daily devices. That's why the hybrid ton was developed to show some root uses without needing to keep root, like removing bloat permanently or getting the tethering service setup.
How do i flash the T-Mobile firmware onto the At&t S7 Edge. I switched to T-Mobile and i want to use my att s7 edge on t-mobile with official t-mobile firmware that works with wifi calling and samsung pay.
thanks
Jesushasadroid said:
How do i flash the T-Mobile firmware onto the At&t S7 Edge. I switched to T-Mobile and i want to use my att s7 edge on t-mobile with official t-mobile firmware that works with wifi calling and samsung pay.
thanks
Click to expand...
Click to collapse
Try using the "Search" function.
-or-
Check out this thread:
http://forum.xda-developers.com/att-s7-edge/help/att-t-mobile-bootloader-version-t3473281/page2
radoo7701 said:
Try using the "Search" function.
-or-
Check out this thread:
http://forum.xda-developers.com/att-s7-edge/help/att-t-mobile-bootloader-version-t3473281/page2
Click to expand...
Click to collapse
Thank you.
Sent from my LG-H918 using Tapatalk
Question: If I'm on AT&T, could I flash just the T-Mobile modem and gain the 4x4 MIMO benefits and still function on AT&T?
i tried flashing the tmobile firmware from 9-27 tmobile...it fails through odin....
any suggestions...thanks family
Check out my thread. Done the same thing, at least I am in T firmware.
kylelopez20 said:
Check out my thread. Done the same thing, at least I am in T firmware.
Click to expand...
Click to collapse
Which thread. You have link of t-mobile firmware you flashed thank you
This one should work great!
http://forum.xda-developers.com/tmobile-s7-edge/how-to/odin-apk1-tmobile-tmbg935ttmb4apk1-t3494724
Remember use the Odin in the Root thread
I flashed the U firmware and then flashed the latest Tmobile, or at least it think its the latest (Baseband: G935TUVU4APIA), and all functions seem to be working properly, tested SMS, MMS, WIFI Calling, not too sure what other Tmobile functions also are related to the modem so let me know what else I should test.
FeintDoxx said:
I flashed the U firmware and then flashed the latest Tmobile, or at least it think its the latest (Baseband: G935TUVU4APIA), and all functions seem to be working properly, tested SMS, MMS, WIFI Calling, not too sure what other Tmobile functions also are related to the modem so let me know what else I should test.
Click to expand...
Click to collapse
Is att your carrier? If so is volte working for you? I loved the u firmware but lack of volte bothered me.
Volte seemed to have worked fine. Anytime I was on a call 4g LTE was workibg. No HD calling or WiFi calling.
Shuthefrontdoor said:
Is att your carrier? If so is volte working for you? I loved the u firmware but lack of volte bothered me.
Click to expand...
Click to collapse
ATT is not my carrier, I carrier unlocked the phone and have only used the phone with a Tmobile SIM. I flashed the U firmware and the Tmobile modem firmware on it and I have seen better reception then when I had the ATT firmware installed opposed to the U firmware with the Tmobile Modem. VOLTE is not stated on the signal but the quality is the same as VoLTE of course there would need to be testing done on my end to prove if it is indeed working as VoLTE. Any suggestions? Would love to contribute with this.
EDIT: Unless of course you were asking if VoLTE was working with ATT on the ufirmware and if this is just ATT specific and if it is the case then my post wouldn't have much addition to the thread.
What did you use to flash.. I have the latest Odin and I keep giving me errors
Alex5234 said:
What did you use to flash.. I have the latest Odin and I keep giving me errors
Click to expand...
Click to collapse
Need to flash pit file if u flashing t-mobile firmaware on att device
Might sound stupid... but how do I do that?
Alex5234 said:
Might sound stupid... but how do I do that?
Click to expand...
Click to collapse
Goto this forum & get all the files. . you will find the Pit file on Page #5. Select repartition and add the PIT file when flashing firmware in odin.
https://forum.xda-developers.com/tmobile-s7-edge/how-to/odin-stock-nougat-firmware-s7-edge-t3558242
Ok.. so let me be specific... I have an unlocked att s7 edge... your saying if I flash the pit file I can turn it into a tmobile phone?
Alex5234 said:
Ok.. so let me be specific... I have an unlocked att s7 edge... your saying if I flash the pit file I can turn it into a tmobile phone?
Click to expand...
Click to collapse
Most likely yes If u have t-mobile service .But not sure abt it.
I have an "unlocked" SGS7 edge that I bought from a friend and he had it with Sprint. I tried using on AT&T network but it asked me for an MSL code in order to be able to change the APN settings to the AT&T ones. I was able to get the MSL from someone who know more about phones than I do. After this, I am able to use the network and data from AT&T but it still has some features blocked because I can't get past the "Hands Free Activation" from Sprint. These features are the hotspot and voicemail among other.
So my question is if I can completely delete Sprint from my phone by flashing the AT&T firmware for the S7 edge onto my device.
All help is welcome.
ihatesprinting said:
I have an "unlocked" SGS7 edge that I bought from a friend and he had it with Sprint. I tried using on AT&T network but it asked me for an MSL code in order to be able to change the APN settings to the AT&T ones. I was able to get the MSL from someone who know more about phones than I do. After this, I am able to use the network and data from AT&T but it still has some features blocked because I can't get past the "Hands Free Activation" from Sprint. These features are the hotspot and voicemail among other.
So my question is if I can completely delete Sprint from my phone by flashing the AT&T firmware for the S7 edge onto my device.
All help is welcome.
Click to expand...
Click to collapse
Read the back of ur phone if it says 935u then it's an unlocked version.
Use the xda samfirm tool put
Model SM-G935U
Region ATT
It will download the most recent firmware from samsung servers.
Set to auto
Flash the files in that zip with odin.
pingufanpoy said:
Read the back of ur phone if it says 935u then it's an unlocked version.
Use the xda samfirm tool put
Model SM-G935U
Region ATT
It will download the most recent firmware from samsung servers.
Set to auto
Flash the files in that zip with odin.
Click to expand...
Click to collapse
It says 935P, am I gonna have trouble with it? I'm not really tech savvy to be honest.
ihatesprinting said:
It says 935P, am I gonna have trouble with it? I'm not really tech savvy to be honest.
Click to expand...
Click to collapse
Nvm ur stuck on sprint model it can't be changed to any other network because the phone model doesn't support flashing to any others.
pingufanpoy said:
Nvm ur stuck on sprint model it can't be changed to any other network because the phone model doesn't support flashing to any others.
Click to expand...
Click to collapse
Damn thats unfortunate, well thanks anyways