Related
I am using a S7 and a S7 Edge from AT&T on Cricket Wireless.
There has been at least one update for each phone that I have been unable to receive.
How should I go about getting the phones to update without actually having an AT&T SIM card in them?
I tried Kies 3, the S7 is not supported in Kies.
I tried SmartSwitch and it connects but says the phone is up to date.
Has the update been released by Cricket yet?
Not all carriers have released the update yet. Aussie carriers still haven't pushed out the update. I'm still waiting for it too.
You'll just have to be patient.
The edge isn't supported by cricket because they don't have it. I talked to Samsung and cricket and they both said that in order to receive updated you need to use the carriers sim card. So if you use an AT&T s7 edge like I'm doing you'll need a prepaid AT&T SIM(same for T-Mobile phone, etc).
Sent from my SAMSUNG-SM-G935A using Tapatalk
They are AT&T branded phones and will need the AT&T updates, the Cricket update would not apply to them.
I will have to go to the local AT&T store and see if they can update the phones.
Milimbar said:
They are AT&T branded phones and will need the AT&T updates, the Cricket update would not apply to them.
I will have to go to the local AT&T store and see if they can update the phones.
Click to expand...
Click to collapse
The local AT&T store will not help as I do not have current AT&T service.
My "local" best buy is almost an hour drive so I can not get much help that way.
Anyone figure out a way to update yet?
Milimbar said:
The local AT&T store will not help as I do not have current AT&T service.
My "local" best buy is almost an hour drive so I can not get much help that way.
Anyone figure out a way to update yet?
Click to expand...
Click to collapse
To update, download the firmware tar files & flash the phones with Odin 3.10.7 on a PC.
Sent from my SM-G925P using Tapatalk
optimummind said:
To update, download the firmware tar files & flash the phones with Odin 3.10.7 on a PC.
Sent from my SM-G925P using Tapatalk
Click to expand...
Click to collapse
I thought that odin did not support the S7 and that they switched to the newer smart switch software.
If odin will work, where could I actually find the tar files.
I have used odin before with the note 2 and note 4, so I am comfortable doing it that way if it will work.
Milimbar said:
I thought that odin did not support the S7 and that they switched to the newer smart switch software.
If odin will work, where could I actually find the tar files.
I have used odin before with the note 2 and note 4, so I am comfortable doing it that way if it will work.
Click to expand...
Click to collapse
You can download the files from either Samsung-updates or Sammobile.
Sent from my SM-G935P using Tapatalk
optimummind said:
You can download the files from either Samsung-updates or Sammobile.
Sent from my SM-G935P using Tapatalk
Click to expand...
Click to collapse
All I can find on both those sites are files for the international version, I have the AT&T versions G930A and G935A
Been thinking about cricket as a carrier. Good point on future updates, how will i get them...
Milimbar said:
All I can find on both those sites are files for the international version, I have the AT&T versions G930A and G935A
Click to expand...
Click to collapse
Shoot, you're right. How lame of AT&T & Samsung not to make available the tar files. Sucks, man...
The easiest way to get the update is if you have a friend on AT&T and you can borrow their SIM for a few minutes. If not, you can buy an AT&T prepaid SIM with a $10 load, pop it in for the OTA and you're good to go. Cricket rarely provides OTA updates and when they do it's only for Cricket branded phones.
Any active sim homed to at&t will work. Like tracfone, gophone, net10, etc
In another thread, theres instructions on how to download at&t updates directly from their servers.
Hello,
I got a good deal on a new sealed Verizon S7 edge, going to use on Cricket. The phone will be in my hands on Tuesday.
The question I have is can I just charge the phone and flash it right out of the box to 935U? Or do I have to turn it on and do anything to it?
Thanks for your time.
Just put that sucka in download mode and flash that u firmware
Many thanks for the reply that's what I was thinking.
Just wanted to be sure. Take Care.
I'm using a Verizon S7 Edge right now on Cricket with the 935U software. I don't have any issues.
Sent from my SM-G935U using Tapatalk
Thanks for the information I saw a few posts about IMEI issues, hope I don't run into that. Not going to root just flash the 935U firmware. Did you have any issues with activation or IMEI? Hoping to just pop my sim in and go.
jp1974 said:
Thanks for the information I saw a few posts about IMEI issues, hope I don't run into that. Not going to root just flash the 935U firmware. Did you have any issues with activation or IMEI? Hoping to just pop my sim in and go.
Click to expand...
Click to collapse
Nope. I just flashed the 935U software, rebooted the phone, popped in my sim card and the phone automatically restarted and download all of the APNs. I haven't rooted either.
Sent from my SM-G935U using Tapatalk
That's great to hear ! I've been messing with electronics for years. First time flashing a phone, not worried about the process, just the activation. Very happy with Cricket, I don't mind my speed being capped, never bothered me, use WiFi 85% of the time.
jp1974 said:
Hello,
I got a good deal on a new sealed Verizon S7 edge, going to use on Cricket. The phone will be in my hands on Tuesday.
The question I have is can I just charge the phone and flash it right out of the box to 935U? Or do I have to turn it on and do anything to it?
Thanks for your time.
Click to expand...
Click to collapse
Hello friend. I have a few questions for you about using a Verizon S7 Edge on Cricket as I too have been presented with a good deal for one and I too have Cricket. May I PM you?
What is the 935U firmware?
When i got my edge, I let it update OTA. Was the update i installed the 935U firmware?
hmmmm,....my model # is sm-g935V. build # g935vvru4ap14.
sorry for the newb ?
chumboy said:
What is the 935U firmware?
When i got my edge, I let it update OTA. Was the update i installed the 935U firmware?
hmmmm,....my model # is sm-g935V. build # g935vvru4ap14.
sorry for the newb ?
Click to expand...
Click to collapse
No you have the 935v =Verizon stock firmware, the 935U is Samsung international firmware meaning it don't have a carrier like Verizon. ect.
How do i flash the T-Mobile firmware onto the At&t S7 Edge. I switched to T-Mobile and i want to use my att s7 edge on t-mobile with official t-mobile firmware that works with wifi calling and samsung pay.
thanks
Jesushasadroid said:
How do i flash the T-Mobile firmware onto the At&t S7 Edge. I switched to T-Mobile and i want to use my att s7 edge on t-mobile with official t-mobile firmware that works with wifi calling and samsung pay.
thanks
Click to expand...
Click to collapse
Try using the "Search" function.
-or-
Check out this thread:
http://forum.xda-developers.com/att-s7-edge/help/att-t-mobile-bootloader-version-t3473281/page2
radoo7701 said:
Try using the "Search" function.
-or-
Check out this thread:
http://forum.xda-developers.com/att-s7-edge/help/att-t-mobile-bootloader-version-t3473281/page2
Click to expand...
Click to collapse
Thank you.
Sent from my LG-H918 using Tapatalk
Question: If I'm on AT&T, could I flash just the T-Mobile modem and gain the 4x4 MIMO benefits and still function on AT&T?
i tried flashing the tmobile firmware from 9-27 tmobile...it fails through odin....
any suggestions...thanks family
Check out my thread. Done the same thing, at least I am in T firmware.
kylelopez20 said:
Check out my thread. Done the same thing, at least I am in T firmware.
Click to expand...
Click to collapse
Which thread. You have link of t-mobile firmware you flashed thank you
This one should work great!
http://forum.xda-developers.com/tmobile-s7-edge/how-to/odin-apk1-tmobile-tmbg935ttmb4apk1-t3494724
Remember use the Odin in the Root thread
I flashed the U firmware and then flashed the latest Tmobile, or at least it think its the latest (Baseband: G935TUVU4APIA), and all functions seem to be working properly, tested SMS, MMS, WIFI Calling, not too sure what other Tmobile functions also are related to the modem so let me know what else I should test.
FeintDoxx said:
I flashed the U firmware and then flashed the latest Tmobile, or at least it think its the latest (Baseband: G935TUVU4APIA), and all functions seem to be working properly, tested SMS, MMS, WIFI Calling, not too sure what other Tmobile functions also are related to the modem so let me know what else I should test.
Click to expand...
Click to collapse
Is att your carrier? If so is volte working for you? I loved the u firmware but lack of volte bothered me.
Volte seemed to have worked fine. Anytime I was on a call 4g LTE was workibg. No HD calling or WiFi calling.
Shuthefrontdoor said:
Is att your carrier? If so is volte working for you? I loved the u firmware but lack of volte bothered me.
Click to expand...
Click to collapse
ATT is not my carrier, I carrier unlocked the phone and have only used the phone with a Tmobile SIM. I flashed the U firmware and the Tmobile modem firmware on it and I have seen better reception then when I had the ATT firmware installed opposed to the U firmware with the Tmobile Modem. VOLTE is not stated on the signal but the quality is the same as VoLTE of course there would need to be testing done on my end to prove if it is indeed working as VoLTE. Any suggestions? Would love to contribute with this.
EDIT: Unless of course you were asking if VoLTE was working with ATT on the ufirmware and if this is just ATT specific and if it is the case then my post wouldn't have much addition to the thread.
What did you use to flash.. I have the latest Odin and I keep giving me errors
Alex5234 said:
What did you use to flash.. I have the latest Odin and I keep giving me errors
Click to expand...
Click to collapse
Need to flash pit file if u flashing t-mobile firmaware on att device
Might sound stupid... but how do I do that?
Alex5234 said:
Might sound stupid... but how do I do that?
Click to expand...
Click to collapse
Goto this forum & get all the files. . you will find the Pit file on Page #5. Select repartition and add the PIT file when flashing firmware in odin.
https://forum.xda-developers.com/tmobile-s7-edge/how-to/odin-stock-nougat-firmware-s7-edge-t3558242
Ok.. so let me be specific... I have an unlocked att s7 edge... your saying if I flash the pit file I can turn it into a tmobile phone?
Alex5234 said:
Ok.. so let me be specific... I have an unlocked att s7 edge... your saying if I flash the pit file I can turn it into a tmobile phone?
Click to expand...
Click to collapse
Most likely yes If u have t-mobile service .But not sure abt it.
So I have seen multiple people here on the forum claiming to do it or wanting to do it and I am a bit confused. I have an s7 edge on contract from ATT. Can I do this? If I flash T Mobile's firmware on this does this make my phone usable with a T Mobile sim?
Thank you
s7fnatic said:
So I have seen multiple people here on the forum claiming to do it or wanting to do it and I am a bit confused. I have an s7 edge on contract from ATT. Can I do this? If I flash T Mobile's firmware on this does this make my phone usable with a T Mobile sim?
Thank you
Click to expand...
Click to collapse
Yes you can and only thing I've noticed not working is video calling and WiFi calling with it seems I get better signal with there's.
bec48 said:
Yes you can and only thing I've noticed not working is video calling and WiFi calling with it seems I get better signal with there's.
Click to expand...
Click to collapse
Yes to both questions?
s7fnatic said:
So I have seen multiple people here on the forum claiming to do it or wanting to do it and I am a bit confused. I have an s7 edge on contract from ATT. Can I do this? If I flash T Mobile's firmware on this does this make my phone usable with a T Mobile sim?
Thank you
Click to expand...
Click to collapse
Yes you can flash it. I'm currently on T Mobile with ATT.
zombo91 said:
Yes you can flash it. I'm currently on T Mobile with ATT.
Click to expand...
Click to collapse
Thank you. I am going to go ahead and give it a try.
bec48 said:
Yes you can and only thing I've noticed not working is video calling and WiFi calling with it seems I get better signal with there's.
Click to expand...
Click to collapse
Can you advise the procedure? I'm currently permanently locked to AT&T network and would like to use a carrier (SK Telecom - Korea).
Wouldn't you still need to SIM unlock your AT&T phone to use on T-mobile network? I don't think just flashing another carriers ROM will allow you to use their network. Am I Wrong in thinking this way?
bec48 said:
Yes you can and only thing I've noticed not working is video calling and WiFi calling with it seems I get better signal with there's.
Click to expand...
Click to collapse
Was the device on the PK1 firmware before flashing to tmobile??
jabreu203 said:
Wouldn't you still need to SIM unlock your AT&T phone to use on T-mobile network? I don't think just flashing another carriers ROM will allow you to use their network. Am I Wrong in thinking this way?
Click to expand...
Click to collapse
I had the same question and that's why I haven't done anything on my phone so far. Also it does not help that I am a noob with all these things and dont want to mess up my phone since this is my daily driver.
vip_lexus147 said:
Was the device on the PK1 firmware before flashing to tmobile??
Click to expand...
Click to collapse
I am not sure if I am looking at the right place but I think you are looking for the build number right? Mine is mmb29m.g935aucu4apj4
ronkim83 said:
Can you advise the procedure? I'm currently permanently locked to AT&T network and would like to use a carrier (SK Telecom - Korea).
Click to expand...
Click to collapse
Go to http://www.cellunlocker.net/ and get an unlock code for your phone. I unlocked my tmobile S7 edge this way right out of the gate worked just fine.
ShrekOpher said:
Go to http://www.cellunlocker.net/ and get an unlock code for your phone. I unlocked my tmobile S7 edge this way right out of the gate worked just fine.
Click to expand...
Click to collapse
I am confused. Can I not flash the phone with t mob firmware without unlocking? I thought this was just a software restriction and would have been removed by flashing a new firmware.
s7fnatic said:
I am confused. Can I not flash the phone with t mob firmware without unlocking? I thought this was just a software restriction and would have been removed by flashing a new firmware.
Click to expand...
Click to collapse
Flashing the phones firmware will not carrier unlock the device. That is tied to the IMEI. It will boot up the Tmobile software, but it still will only work on AT&T network.
Also in order to unlock the device from AT&T they will most likely bill you for the remaining value of the device as soon as you request an unlock code. You cannot take a phone from one carrier to another unless it is fully paid off.
I have an Unlocked AT&T S7 and I can put in a T-Mobile sim and it works. So why Flash T-Mobile onto an AT&T phone if its Unlocked??? My AT&T S7 is Paid for in Full.
My question is, if you do flash T-Mobile firmware on AT&T phone will you get OTA updates off of T-Mobile, like when Nougat comes out????? Also would you still have wifi calling and get all the LTE bands of a T-Mobile phone????
tailgunner9 said:
I have an Unlocked AT&T S7 and I can put in a T-Mobile sim and it works. So why Flash T-Mobile onto an AT&T phone if its Unlocked??? My AT&T S7 is Paid for in Full.
My question is, if you do flash T-Mobile firmware on AT&T phone will you get OTA updates off of T-Mobile, like when Nougat comes out????? Also would you still have wifi calling and get all the LTE bands of a T-Mobile phone????
Click to expand...
Click to collapse
Yes. All the edge models have identical hardware. Their only differentiating factor is the firmware they run. I flashed the unlocked firmware onto my AT&T model and now get updates directly from Samsung. If you flash the T-mobile firmware on the AT&T device, all features will work and updates will come from T-Mobile. Same would work if you flash the AT&T firmware onto a T-Mobile variant. Or Verizon to Sprint, Sprint to AT&T, etc.
Sent from my SM-G935U using Tapatalk
stew1411 said:
Yes. All the edge models have identical hardware. Their only differentiating factor is the firmware they run. I flashed the unlocked firmware onto my AT&T model and now get updates directly from Samsung. If you flash the T-mobile firmware on the AT&T device, all features will work and updates will come from T-Mobile. Same would work if you flash the AT&T firmware onto a T-Mobile variant. Or Verizon to Sprint, Sprint to AT&T, etc.
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
So you are saying this about S7 Edge, does this work the same for the AT&T S7 SM-G930A? Mine is not the Factory Unlocked model but I got the unlock code from AT&T. I thought the firmware came from the carrier and not Samsung on updates on a carrier branded phone???
So if I flash T-Mobile into my AT&T S7, I can also flash it back to AT&T firmware should I go back to AT&T???
Think you are talking about flashing firmware on your that is original for the Factory Unlocked version, think its SM-G930F
tailgunner9 said:
So you are saying this about S7 Edge, does this work the same for the AT&T S7 SM-G930A? Mine is not the Factory Unlocked model but I got the unlock code from AT&T. I thought the firmware came from the carrier and not Samsung on updates on a carrier branded phone???
So if I flash T-Mobile into my AT&T S7, I can also flash it back to AT&T firmware should I go back to AT&T???
Think you are talking about flashing firmware on your that is original for the Factory Unlocked version, think its SM-G930F
Click to expand...
Click to collapse
Well people on the S7 edge have flashed the tmo firmware on their AT&T models. Updates come from carrier on branded phones. So if you have an AT&T phone and flash another carriers firmware, it would only be branded by the physical logo on the back. It's like buying a Windows PC and installing Linux. The updates would come from Linux, not Windows, and vice versa. You could always go back to the AT&T firmware, just make sure that both firmwares you flash are on the same bootloader version.
Sent from my SM-G935U using Tapatalk
stew1411 said:
Well people on the S7 edge have flashed the tmo firmware on their AT&T models. Updates come from carrier on branded phones. So if you have an AT&T phone and flash another carriers firmware, it would only be branded by the physical logo on the back. It's like buying a Windows PC and installing Linux. The updates would come from Linux, not Windows, and vice versa. You could always go back to the AT&T firmware, just make sure that both firmwares you flash are on the same bootloader version.
Sent from my SM-G935U using Tapatalk
Click to expand...
Click to collapse
But I have always read that OTA updates come from Carrier not from Samsung. Thanks for the info. Maybe AT&T will be out with Nougat by Spring after S8 are out for sale.
tailgunner9 said:
But I have always read that OTA updates come from Carrier not from Samsung. Thanks for the info. Maybe AT&T will be out with Nougat by Spring after S8 are out for sale.
Click to expand...
Click to collapse
Updates do come from the carrier. However, if you flash a different carriers firmware you will start getting updates from the new carrier.
Sent from my SM-G935U using Tapatalk
ShrekOpher said:
Flashing the phones firmware will not carrier unlock the device. That is tied to the IMEI. It will boot up the Tmobile software, but it still will only work on AT&T network.
Also in order to unlock the device from AT&T they will most likely bill you for the remaining value of the device as soon as you request an unlock code. You cannot take a phone from one carrier to another unless it is fully paid off.
Click to expand...
Click to collapse
You can pay a 3rd party service to unlock it on contract or not I have done it several times. (I use UnlockUnit for all my devices contract or not get code in like 15min)
Sent from my SAMSUNG-SM-G930A using Tapatalk
The Following links are for the Unlocked USA Firmware for the Samsung Galaxy S8+ (G955U ONLY) This firmware will delete all user data and remove AT&T Bloatware. I have also included a tutorial video that I found on YouTube. I am not responsible for burned, broken, blown-up or bricked devices. Flash at your on risk.
Instruction Video - https://www.youtube.com/watch?v=dAHqc3-QkPk
Odin 3.12.5 - https://www.androidfilehost.com/?fid=457095661767159695
Firmware From Unlocked US Cellular No Bloatware - https://drive.google.com/file/d/0B7rLA6mgXCYvdkVmSkNjWFNBLUE/view?usp=sharing
Canada Firmware No Bloat Full Samsung with integrated Smart Call (Caller ID for Unknown Numbers) - https://drive.google.com/file/d/0B7rLA6mgXCYvTnFramFmMTNtbWc/view?usp=sharing
APN Settings - https://apn.gishan.net/settings/1740_4_att_apn_settings_for_samsung_galaxy_s8.php
Enjoy The Freedom of no Bloat
P.S. Use NEXTGENPHONE in the APN in Place of ATT
UPDATE:
FULLY UNLOCKED USA VERSION XAA
https://drive.google.com/file/d/0B7rLA6mgXCYvU0lmZXJJQVlkQVE/view?usp=sharing
First boot is long so just wait.
Smart Call is built in and is not controllable by the user. Spam Protection is.
Use Prince's Odin for this package
BigHussle said:
The Following links are for the Unlocked USA Firmware for the Samsung Galaxy S8+ (G955U ONLY) This firmware will delete all user data and remove AT&T Bloatware. I have also included a tutorial video that I found on YouTube. I am not responsible for burned, broken, blown-up or bricked devices. Flash at your on risk.
Instruction Video - https://www.youtube.com/watch?v=dAHqc3-QkPk
Odin 3.12.5 - https://www.androidfilehost.com/?fid=457095661767159695
Firmware - https://drive.google.com/file/d/0B7rLA6mgXCYvdkVmSkNjWFNBLUE/view?usp=sharing
APN Settings - https://apn.gishan.net/settings/1740_4_att_apn_settings_for_samsung_galaxy_s8.php
Enjoy The Freedom of no Bloat
P.S. Use NEXTGENPHONE
Click to expand...
Click to collapse
Will volte still work with unlocked firmware? Samsung pay?
Shuthefrontdoor said:
Will volte still work with unlocked firmware? Samsung pay?
Click to expand...
Click to collapse
Samsung Pay Works but Wifi Calling and Video Calling Does Not
this odin writes to userdata? So it allows full carrier switch? That's huge if true
so how does this work when its time to get an ota update? do you need to flash back to att and then flash to the unlocked equivalent or can you just take unlocked ota's to update the phone?
thecrunked said:
so how does this work when its time to get an ota update? do you need to flash back to att and then flash to the unlocked equivalent or can you just take unlocked ota's to update the phone?
Click to expand...
Click to collapse
You do not have to ODIN back. It will update normally. It was pulled from a US Cellular Device which was sold unlocked. I have the Canada version also with the built in Caller ID to identify unknown numbers with the Samsung Smart Call feature. and you do not have to program the APN. Yall let me know if you want me to upload it along with instructions.
Guitarboarder28 said:
this odin writes to userdata? So it allows full carrier switch? That's huge if true
Click to expand...
Click to collapse
yep there's a slot for that
I have a Sprint S8+
Have tried flashing over it with this ROM and a Verizon ROM.
Both flash worked completely n ODIN but when the phone reboots, it is still Sprint.
I have seen other posts with same problem.
Am I doing something wrong?
I have tried both Home CSC and Non-Home CSC and the Userdata file was in UMS field in ODIN.
DESERTDART said:
I have a Sprint S8+
Have tried flashing over it with this ROM and a Verizon ROM.
Both flash worked completely n ODIN but when the phone reboots, it is still Sprint.
I have seen other posts with same problem.
Am I doing something wrong?
I have tried both Home CSC and Non-Home CSC and the Userdata file was in UMS field in ODIN.
Click to expand...
Click to collapse
I have not tried it on Sprint or Verizon I know it works on AT&T. i have ran both firmwares on My AT&T S8+ With no issues
As stated using the proper ODIN is important
BigHussle said:
I have not tried it on Sprint or Verizon I know it works on AT&T. i have ran both firmwares on My AT&T S8+ With no issues
As stated using the proper ODIN is important
Click to expand...
Click to collapse
I used the ODIN at the top of this thread.
DESERTDART said:
I used the ODIN at the top of this thread.
Click to expand...
Click to collapse
Same one I used and It worked
DESERTDART said:
I have a Sprint S8+
Have tried flashing over it with this ROM and a Verizon ROM.
Both flash worked completely n ODIN but when the phone reboots, it is still Sprint.
I have seen other posts with same problem.
Am I doing something wrong?
I have tried both Home CSC and Non-Home CSC and the Userdata file was in UMS field in ODIN.
Click to expand...
Click to collapse
I have the Verizon variant and downloaded the Canadian version, and flashed that over completely the regular CSC, not the home_CSC. This was using the prince comsey or whatever version of Odin, and I let it reboot after. During the setup I did the same thing the other guy mentioned where you only set a pin, and select yes to boot the device with your pin. Once I got through the setup I turned on dev mode, and flashed my stock FW, which was Verizon. I selected all files and chose the home_csc from the Verizon package along with the VZW AP, BL and CP files.
Flashed them all over and let the device reboot. Once it turned on it took a minute or so to get LTE and service in general but it worked.
BigHussle said:
Canada Firmware No Bloat Full Samsung with integrated Smart Call (Caller ID for Unknown Numbers) - https://drive.google.com/file/d/0B7rLA6mgXCYvTnFramFmMTNtbWc/view?usp=sharing
Enjoy The Freedom of no Bloat
P.S. Use NEXTGENPHONE in the APN in Place of ATT
Click to expand...
Click to collapse
Thanks so much for this! Just for clarification the Unlocked US Cellular version does not have Smart Call only the Canadian version does or am I reading it wrong? Just trying to figure out the difference and which one would be best for my G955U.
Thanks!
SupacatSF said:
Thanks so much for this! Just for clarification the Unlocked US Cellular version does not have Smart Call only the Canadian version does or am I reading it wrong? Just trying to figure out the difference and which one would be best for my G955U.
Thanks!
Click to expand...
Click to collapse
The Canadian one is the one with Smart Call
So this makes an att phone unlocked to any carrier?
So it makes it be just like this :
https://www.google.com/url?sa=t&sou...ko_1_KTaSMGYXh58g&sig2=S61c8u5HwgvNYsOhGPXOGA
BigHussle said:
I have not tried it on Sprint or Verizon I know it works on AT&T. i have ran both firmwares on My AT&T S8+ With no issues
As stated using the proper ODIN is important
Click to expand...
Click to collapse
Same thing happened to me. Successfully flashed but when it boots it still is an AT&T. I have the AT&T version and tried the home csc. Everything passes but it doesn't work for me. Weird
I'm on AT&T and wondering which one is better to flash. Is the only difference between us unlocked and canada firmwares the smart call feature?
SupacatSF said:
Same thing happened to me. Successfully flashed but when it boots it still is an AT&T. I have the AT&T version and tried the home csc. Everything passes but it doesn't work for me. Weird
Click to expand...
Click to collapse
Just an update but I tried the Canadian one on my device using the home.csc. Notice it does not have a UMS. It worked! The Canadian version is super clean! I am on AT&T, besides for the known things like wifi calling. Are we missing anything by not using the US Cellular version?
Thanks again, it just seems like the US cellular version wouldn't take for me but I am now happy and bloatware free.
SupacatSF said:
Thanks so much for this! Just for clarification the Unlocked US Cellular version does not have Smart Call only the Canadian version does or am I reading it wrong? Just trying to figure out the difference and which one would be best for my G955U.
Thanks!
Click to expand...
Click to collapse
They both will work the same. On the US Cellular version I think you have to program the APN and it does not have the smart call feature. The Canadian version does
X_Fact0r said:
I'm on AT&T and wondering which one is better to flash. Is the only difference between us unlocked and canada firmwares the smart call feature?
Click to expand...
Click to collapse
yes the smart call feature is the only difference is the smart call feature. there is no need to install 3rd party software to get caller Id for unknowns and it still detects spam