Hi all,
Smg900p Sprint s5 had the new CM13 nightly and seemingly out of nowhere it rebooted to "Set Warranty Bit : kernel"
When I switch to download mode this is my screen:
ODIN MODE
PRODUCT NAME:SM-G900P
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: Ox1 (4)
QUALCOM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T3, A1, A3, P1
SECURE DOWNLOAD : ENABLE
UDC START
The message "SW REV CHECK FAIL : [aboot]Fused 3 > Binary 1" is added to this after I attempt flashing the stock rom with Odin. Any advice would be greatly appreciated!
After I installed a custom ROM on my s5, s4 and sm-g350 this message came. I think it's pretty normal.
Polyparadox said:
After I installed a custom ROM on my s5, s4 and sm-g350 this message came. I think it's pretty normal.
Click to expand...
Click to collapse
When I reboot all I get the Samsung Galaxy s5 screen and at the top in those yellow letters "Set Warranty Bit : kernel" and it's stuck there.
Tried deleting everything and flashing stock rom from both RWilco and Sammobile and it doesn't work. I suspect my the bootloader is dead which I'm working on now OR that I tripped the knox security which forced it to lock.
I've seen suggestions on downgrading to 4.4.2 but believe that there isn't a way to download for this model. I've tried Sammobile's version and it doesn't work.
This sucks.
Why don't you try refreshing the bootloader with Odin?
Polyparadox said:
Why don't you try refreshing the bootloader with Odin?
Click to expand...
Click to collapse
Sorry, I'm not sure I know how to do that. I'm researching and working on the bootloader info right now. Any advice is much appreciated.
Related
hey everyone out there that can help me
i tried to root my phone but it stopped midway. then i got it working again, but my dataroaming was disabled. so i did a factory reset and now it is stuck in Odin mode.
i have red hundreds of threads on this put when i start up my phone it says:
Could not do normal boot
ODIN MODE
PRODUCT NAME: GT-I9506
CURRENT BINARY: Custom
SYSTEM STATUS: Custom
KNOX KERNEL LOCK: 0x0
KNOX WARRANTY VOID: 0x1
QUALCOMM SECUREBOOT: ENABLE
RP SWREV: S1, T1, R1, A1, P1
WRITE PROTECTION: ENABLE
UDC Start
i have tried to pull out the battery and the sim card. it didn't work
i have tried reinstalling the stock firmware with odin3 v1.85
i have tried the same with samsung kies 3 it doesn't even recognise (sorry if mispelled) the device
please help
I would Odin flash a recovery and format everything on the phone before attempting to odin flash official firmware.
Make sure you are flashing the latest 4.4 that your carrier has released.
http://www.sammobile.com/firmwares/
Just flash a 4.4.2 stock rom true Odin that is for you device.
WHEN I TRIED USING ODIN
FOR ROOTING
ODIN MODE
PRODUCT NAME:SM-900F
CURRENT BINARY: SAMSUNG OFFICIAL
SYSTEN STATUS: OFFICIAL
REACTIVATION LOCK(KK): ON
KNOX WARRENTY VOIO: 0X0
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV : S1 T1 R1 A1 P1
UDC START
SECURE CHECK FAIL : RECOVERY
WHAT DO I NEED TO DO
PLS ADVICE
MY EMAIL
([email protected]):crying:
When i rooted my g900f it wasnt so long ago , i flashed twrp on odin then flashed in twrp supersu zip which can be found on chainfires web, google both , u'll find sumting
Try turning of your reactivation lock.
Reactivation lock would be my guess. It stops a lot of people until they turn it off.
So originally I had 5.0 stock firmware that was updated through Samsung Kies.
Then I started using Samsung SmartSwitch (new Kies) and it told me I had a new update. I tried installing it and it failed.
So phone was stuck and error message showed ".. update failed .." and so on.
I decided to put the phone in download mode and flash the stock firmware via Odin but no matter what I try, everything fails.
As of right now, I've read and tried multiple things. Like this:
http://forum.xda-developers.com/showthread.php?t=2784880
http://forum.xda-developers.com/verizon-galaxy-s5/help/wont-past-s5-powered-android-screen-t3225682
When I go to download mode on the phone, here is what reads on the top left:
ODIN MODE
PRODUCT NAME: SM-G900V
SYSTEM STATUS: Official
REACTIVATION LOCK(KK): OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD : ENABLE
UDC START
The following guide shows very good instructions with all the files but I am unsure of which version I should be using or even the file for that version since there are SOO MANY files there. http://forum.xda-developers.com/showthread.php?t=2784880
A little detail answer would really be appreciated.
Thank you!!
s.thepatel said:
So originally I had 5.0 stock firmware that was updated through Samsung Kies.
Then I started using Samsung SmartSwitch (new Kies) and it told me I had a new update. I tried installing it and it failed.
So phone was stuck and error message showed ".. update failed .." and so on.
I decided to put the phone in download mode and flash the stock firmware via Odin but no matter what I try, everything fails.
As of right now, I've read and tried multiple things. Like this:
http://forum.xda-developers.com/showthread.php?t=2784880
http://forum.xda-developers.com/verizon-galaxy-s5/help/wont-past-s5-powered-android-screen-t3225682
When I go to download mode on the phone, here is what reads on the top left:
ODIN MODE
PRODUCT NAME: SM-G900V
SYSTEM STATUS: Official
REACTIVATION LOCK(KK): OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, A1, A2, P1
SECURE DOWNLOAD : ENABLE
UDC START
The following guide shows very good instructions with all the files but I am unsure of which version I should be using or even the file for that version since there are SOO MANY files there. http://forum.xda-developers.com/showthread.php?t=2784880
A little detail answer would really be appreciated.
Thank you!!
Click to expand...
Click to collapse
were you already rooted? if not then you cant downgrade due to the bootloader being locked
Hey there, I'm new to the whole rooting thing, and I messed up while doing it the first time so I get stuck at the Samsung Logo now, and it says while on that screen 'SET WARRENTY BIT: KERNAL', which from what I have read online means that my bootloader is messed up, but I don't know how to fix it. I will provide as much information as I can while not being able to load into my phone.
Info:
Model: SM-S902L(GP)
GPSAS902CB
FFC ID: A3LSMG900V
Galaxy S5 (TFN Region)
I've tried custom bootloaders, Stock Firmware, Factory Reset. Just about everything I can think of. I've even tried the stock firmware for my model.
I get the error: SW REV CHECK FAIL: (aboot) Fused 3 > Binary 2
Additional Info (From Screen):
ODIN MODE
Product Name: SM-S902L
Current Binary: Custom
System Status: Custom
Reactivation Lock(KK): Off
Knox Warranty Void: 0x1 (1)
Qualcomm Secureboot: Enable (CSB)
AP SWREV: S1, T3, R1, A3, P1
UDC START
If anybody can help that would be much appreciated!
Hello guys,
Backstory(see my last thread (https://forum.xda-developers.com/general/help/samsung-galaxy-s5rooted-suddenly-stuck-t3674465).
Rooted S5 with 4.4.2 had some problems, random freezing etc. Then it suddenly got stuck in a recovery loop.
I managed to save all important data by flashing TWRP, and then wiped it and flashed 4.4.2 on it again.
I used the phone for about a week, then it suddenly started causing problems, it wouldn't charge anymore when it is booted up. I then tried to wipe it all again and restart the phone but it didnt help. I then tried flashing the newest Android version for the S5 on it. 6.0.1. and flashed the CF-Auto-Root file.
It worked but same problems: It doesn't charge while it's on. When I start it up it shows:
Set Warranty bit : kernel
When I turn it off and connect it to the power it will only show the battery sign with the flash(lightning sign) inside of it, then restart, then show it again, then restart, until infinity. I have even bought a new battery, this is has got to be some weird software thing.
When I enter into download/Odin mode it shows:
PRODUCT NAME: SM-G900F
CURRENT BINARY: CUSTOM
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Is there anything I can do to return to stock, and make it work normally again or is there some hardware problem as well?
UPDATE:
It seems I made some progress, flashed 6.0.1 again and did the CF autoroot again.
"Set Warranty bit : kernel" is gone now, and Odin Mode now shows Samsung official as BINARY. Still doensn't charge though.
PRODUCT NAME: SM-G900F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: CUSTOM
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID 0x1 (4)
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T1, R1, A1, P1
SECURE DOWNLOAD : ENABLE
UDC START
Mattson44 said:
Hello guys,
Backstory(see my last thread (https://forum.xda-developers.com/general/help/samsung-galaxy-s5rooted-suddenly-stuck-t3674465)...
Click to expand...
Click to collapse
Your best bet is to post this question within the following thread. Someone should be able to help you out or provide some guidance as to where to obtain it.
http://forum.xda-developers.com/showthread.php?t=2700073
Good Luck!
~~~~~~~~~~~~~~~
I DO NOT PROVIDE SUPPORT VIA PM UNLESS ASKED/REQUESTED BY MYSELF.
PLEASE KEEP IT IN THE THREADS WHERE EVERYONE CAN SHARE