Related
Someone please help!
I have a LG Optimus L7 P705g, on v10C stock rom, rooted according to http://forum.xda-developers.com/showthread.php?t=1906133
Then I tried to unlock bootloader and install cwm recovery following http://forum.xda-developers.com/showthread.php?t=1664322
I tried both v1 and v2 of the L7CWM archive. But the phone keeps rebooting about 2 minutes after power on.
No matter I boot normally, or boot into cwm recovery, it still restarts about 2 minutes in.
It's driving me crazy. Can somebody give me some pointer in how to resolve this constant reboot situation?
I believe I followed all the instructions provided with the above threads, and tried flashing both v1 and v2 a few times.
Thanks in advance!
ecapella said:
Someone please help!
I have a LG Optimus L7 P705g, on v10C stock rom, rooted according to http://forum.xda-developers.com/showthread.php?t=1906133
Then I tried to unlock bootloader and install cwm recovery following http://forum.xda-developers.com/showthread.php?t=1664322
I tried both v1 and v2 of the L7CWM archive. But the phone keeps rebooting about 2 minutes after power on.
No matter I boot normally, or boot into cwm recovery, it still restarts about 2 minutes in.
It's driving me crazy. Can somebody give me some pointer in how to resolve this constant reboot situation?
I believe I followed all the instructions provided with the above threads, and tried flashing both v1 and v2 a few times.
Thanks in advance!
Click to expand...
Click to collapse
ok, you need to do this.
First, follow this tutorial http://forum.xda-developers.com/showpost.php?p=31828740&postcount=1191 to flash the ROM from this post http://forum.xda-developers.com/showthread.php?t=2176430 this rom is already rooted, and includes CWM and unlocked bootloader, so you shouldn't have any problems to flash any other ROM after that one.
and second, you need to learn to search on the forum, and read more before asking already solved issues.
good luck
vashminted said:
ok, you need to do this.
First, follow this tutorial http://forum.xda-developers.com/showpost.php?p=31828740&postcount=1191 to flash the ROM from this post http://forum.xda-developers.com/showthread.php?t=2176430 this rom is already rooted, and includes CWM and unlocked bootloader, so you shouldn't have any problems to flash any other ROM after that one.
and second, you need to learn to search on the forum, and read more before asking already solved issues.
good luck
Click to expand...
Click to collapse
Thanks for your quick reply! Actually, I'm a little hesitant to use kdz updater, as I've read some posts saying that even after they flash the stock kdz, the phone was in an even worse situation.
Since I can still boot into cwm recovery (I have a 2-minute time frame before the phone restarts itself), should I do a wipe cache or something? Will it help?
Flashing the whole thing is my last resort.
ecapella said:
Thanks for your quick reply! Actually, I'm a little hesitant to use kdz updater, as I've read some posts saying that even after they flash the stock kdz, the phone was in an even worse situation.
Since I can still boot into cwm recovery (I have a 2-minute time frame before the phone restarts itself), should I do a wipe cache or something? Will it help?
Flashing the whole thing is my last resort.
Click to expand...
Click to collapse
yes, I've also read that some people have problems after flashin kdz....but i dont know why, KDZ flashing is usually the best way to make sure your phone is back to a "perfect" working state, since it restores everything to the way it should be, and in most situations is the only way to unbrick the phone.
I can't tell you how many times I had to use KDZ updater to restore my phone after messing with it, im not a developer but i do a lot of experiments with my phone trying to make it work better, and most of the times it end totally bricked, and every time KDZ updater saves my ass. Some time ago i was trying to modify the stock rom myself, and I used to flash via KDZ my phone at least twice a day....so for me is pretty safe to use
vashminted said:
yes, I've also read that some people have problems after flashin kdz....but i dont know why, KDZ flashing is usually the best way to make sure your phone is back to a "perfect" working state, since it restores everything to the way it should be, and in most situations is the only way to unbrick the phone.
I can't tell you how many times I had to use KDZ updater to restore my phone after messing with it, im not a developer but i do a lot of experiments with my phone trying to make it work better, and most of the times it end totally bricked, and every time KDZ updater saves my ass. Some time ago i was trying to modify the stock rom myself, and I used to flash via KDZ my phone at least twice a day....so for me is pretty safe to use
Click to expand...
Click to collapse
I tried to read as many posts as possible about using the L7CWM archive to unlock bootloader and CWM recovery before actually doing it. People with P700 and P705 both reported success. I don't know what I did wrong. I am so frustrated...
The ROM you pointed me to get is for P700, does it matter? (Mine is P705). Or should I use my stock rom kdz to test it out first?
Also the two links that you gave me have different phone mode setting in the KDZ updater, one set as EMERGENCY, the other one set as DIAG. Which one should I use?
Thanks again!
Hope there is an easier way than using the KDZ updater... :fingers-crossed:
ecapella said:
I tried to read as many posts as possible about using the L7CWM archive to unlock bootloader and CWM recovery before actually doing it. People with P700 and P705 both reported success. I don't know what I did wrong. I am so frustrated...
The ROM you pointed me to get is for P700, does it matter? (Mine is P705). Or should I use my stock rom kdz to test it out first?
Also the two links that you gave me have different phone mode setting in the KDZ updater, one set as EMERGENCY, the other one set as DIAG. Which one should I use?
Thanks again!
Hope there is an easier way than using the KDZ updater... :fingers-crossed:
Click to expand...
Click to collapse
yep, it's for P700, but other than NFC, there's no difference...i dont recomend to use that rom for every day because it will drain your battery because of the NFC. but since it comes already rooted and unlocked, its an excelent base to make sure everything is well installed, after that you should be able to enter into recovery without problems, and then you can flash a ROM for P705. Personally I suggest you to try this one http://forum.xda-developers.com/showthread.php?t=2472479 it's working very good for me, and have specific kernel to p705
Of course you can try with stock kdz for p705, but hen you will have to repeat the process with L7CWM and chances are that something goes wrong again.
And I gave you the link that use EMERGENCY because it is the way I use to flash a KDZ, you can try to follow tutorial with DIAG option, but I haven't test it myself, and I would never recommend something I haven't tested before. Also because you said your phone reboots every two minutes, and I think DIAG option needs the phone to be ON while flashing, in EMERGENCY option, the phone will never turn off untill you unplug the cable.
vashminted said:
yep, it's for P700, but other than NFC, there's no difference...i dont recomend to use that rom for every day because it will drain your battery because of the NFC. but since it comes already rooted and unlocked, its an excelent base to make sure everything is well installed, after that you should be able to enter into recovery without problems, and then you can flash a ROM for P705. Personally I suggest you to try this one http://forum.xda-developers.com/showthread.php?t=2472479 it's working very good for me, and have specific kernel to p705
Of course you can try with stock kdz for p705, but hen you will have to repeat the process with L7CWM and chances are that something goes wrong again.
And I gave you the link that use EMERGENCY because it is the way I use to flash a KDZ, you can try to follow tutorial with DIAG option, but I haven't test it myself, and I would never recommend something I haven't tested before. Also because you said your phone reboots every two minutes, and I think DIAG option needs the phone to be ON while flashing, in EMERGENCY option, the phone will never turn off untill you unplug the cable.
Click to expand...
Click to collapse
I read another post about flashing the Homero's v10K rooted KDZ that you mentioned into a North American P705, and that made the phone unbootable.
But fortunately, I managed to get a stock bootloader from a friend's North American P705 and push it into my phone. This did the trick, my phone didn't have the boot loop anymore.
Then, I upgraded the stock firmware to v20A via LG's mobile support tool. At this version (JB as opposed to ICS), I tried to push the cracked bootloader into the phone again. This time, everything was all right, no boot loop! So I flashed the CWM recovery, and everything was good.
I just tested out Szymel's modded stock rom v20E with OC 1305Mhz, seems pretty good!
Now I have a lot of ROM choices to test out. :laugh:
Anyway, thanks so much for your help and suggestions!
HELP
ecapella said:
I read another post about flashing the Homero's v10K rooted KDZ that you mentioned into a North American P705, and that made the phone unbootable.
But fortunately, I managed to get a stock bootloader from a friend's North American P705 and push it into my phone. This did the trick, my phone didn't have the boot loop anymore.
Then, I upgraded the stock firmware to v20A via LG's mobile support tool. At this version (JB as opposed to ICS), I tried to push the cracked bootloader into the phone again. This time, everything was all right, no boot loop! So I flashed the CWM recovery, and everything was good.
I just tested out Szymel's modded stock rom v20E with OC 1305Mhz, seems pretty good!
Now I have a lot of ROM choices to test out. :laugh:
Anyway, thanks so much for your help and suggestions!
Click to expand...
Click to collapse
i have the same problem with my l7 p705 i rooted it and then i installed CWM and then it started restarting every 2 minutes. so i thought maybe unrooting it would help but it didn't. please give me all the steps that you did so i can stop my phone from booting every 2 minutes.!!!
LG P705
My Phones says secure booting error Cause:boot certification verify i`m a newbie help me please ,
Lg Optimus L7 P705 Secure booting Error!
Hello everyone,
I'm from Turkey.
I have LG Optimus L7 P705.
My problem, to take root and Cyanogenmod. But phone is brick.
I have seen the error screen :
-Secure booting Error!
-Cause : boot certification verify
Help me !
Mail Adress 7/24 : [email protected]
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595
Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...
Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilà, like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!
Hey guys,
I recently rooted and flashed my LG G2 D801 to the Dirty Unicorns 4.4.4 along with the JellyBean BaseBand (since I was on T-Mobile KitKat before).
I noticed that the usb connection to the PC wasn't working after the flash and thought I didn't properly clear everything. So I tried to flash the rom again only to end up clearing the internal data as well which had the rom on it. Now my phone is Bricked and I can't upload anything because the phone won't show up in Windows or Linux.
I CAN still however go into Download Mode and TWRP Recovery.
Tried to install the universal LG United Mobile Driver, phone still won't show up on PC.
Been scouring forums for a solution for a couple days but still can't find anything that will fix the issue.
What else can I do!?
Try this I was in your same situation and have D-801 and bricked my phone like 2 times(messing with it).
Just follow all the instructions from the site below and it should work.
http://forum.xda-developers.com/showthread.php?t=2432476
sai777 said:
Try this I was in your same situation and have D-801 and bricked my phone like 2 times(messing with it).
Just follow all the instructions from the site below and it should work.
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Tried the first KDZ method first and tool said phone wasn't connected.
Switched to TOT method and Device manager didn't list my phone so I can't change to COM41.
This is even though I uninstalled the LG Drivers and re-installed them...
Download everything from the post itself, even the drivers and download the KitKat July 31 KDZ. Put phone in download mode and follow directions. Only 1st mode worked for me. So I suggest you try it a few times...
Total Noob Moment
Hey guys, so ended up solving my issue around the phone not being recognized by the PC. Well, I decided today that I would try a different USB cord and whaddyaknoww the PC finally recognize/install the drivers so I could use the Flash tool with the KDZ method. :victory:
Thanks for the replies!
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
shmatul said:
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
Click to expand...
Click to collapse
You have a refurb and a different model. Check my post here. You need to open your phone, you either have the D800 or D801. Flash that ROM, and you wil be fine.
Meppolan said:
You have a refurb and a different model. Check my post here. You need to open your phone, you either have the D800 or D801. Flash that ROM, and you wil be fine.
Click to expand...
Click to collapse
Thanx
The phone was sold as NEW and not Refr.
It was in Genuine box, with Genuine Chrager (and even manual)
Though it might be fraud...
I talked to the seller, and i am sending it back to him
Hopefully he will fix it/replace it
If not i will send him you link..
I think i'm having exactly the same problem with you T_T
shmatul said:
Hello
I have LG G2 32GB from HK
First I Rooted the device, everything was OK- phone works...
Than I decided to burn STOCK ROM , i used LG Flash Tool 2014
Flash was 100% success, no error
After Device finish boot,
In the first Welcome screen (where you choose language)
I cannot touch the screen, everywhere i click (touch) the screen it seems like i touch somewhere else....
I cannot proceed forward from the welcome screen
The phone does not respond to my touch.... broken
The phone goes into Download mode, and quite strange- though i flah unrooted Stock Rom - it still writes that the phone is rooted.....
I tried to flash 5 different ROM (kdz file), None of them helped...same problem for each KDZ
I tried to flash using Win 8.1 , and Win7 ...same thing..touch not working after boot finished.....
I found a similart problem with no solution:
http://forum.xda-developers.com/lg-g...flash-t2922009
I dont know what to do....
Please help
Thanx
Click to expand...
Click to collapse
I think i'm having exactly the same problem as you T_T
so i decided to open my LG G2 to find out which exact model it is, and what i found is LS980 instead of D802.
but when i try to flash it with .tot files with LG flashtool v1.81, but i always got [Download FAIL!!] Check DLL or BIN file.
i also tried to flash it with some KDZ files like (D80210B_00, D80210F_00) i got 100% success but stuck at 1st welcome screen too.
i tried to look for KDZ file for the LS980 version but i can't any, so can someone please help me out here, please?
Would it work if i flash it with KDZ if i can find the LS980 KDZ-file for it?
i hope someone can help me please...
i attached 2pics below and sorry for my bad english.
[email protected] said:
I think i'm having exactly the same problem as you T_T
so i decided to open my LG G2 to find out which exact model it is, and what i found is LS980 instead of D802.
but when i try to flash it with .tot files with LG flashtool v1.81, but i always got [Download FAIL!!] Check DLL or BIN file.
i also tried to flash it with some KDZ files like (D80210B_00, D80210F_00) i got 100% success but stuck at 1st welcome screen too.
i tried to look for KDZ file for the LS980 version but i can't any, so can someone please help me out here, please?
Would it work if i flash it with KDZ if i can find the LS980 KDZ-file for it?
i hope someone can help me please...
i attached 2pics below and sorry for my bad english.
Click to expand...
Click to collapse
You can flash with the TOT, you just need to edit the TOT file in a Hex editor and change the model to what you have (LS980). Look at my post here on how to do that.
As you read. After a whole day of searching non-stop from day 'til night, I finally give up and ask for help.
I've tried to flash a Lollipop ROM, which resulted in my LG G2 D800 having a soft brick.
I already had this issue once, so I knew what I had to do. I used a Kitkat 20c TOT package to return to Stock Kitkat. However, I kept recieving an error;
Device Model Unknown, Check Model or DLL. Or something similar. Upon my first search, I found out about the custom DLL.
So I tried it. But I get another error; CrossDL [Unknown] to [D800]. I tried 3 different DLL files, modified the TOT file (Hex Editor paste write)
I also ended up flashing some img files I don't remember which post it was exactly, but it was from here.
My device no longer boots up, it gives me, however, the option to either reboot or go directly to download mode once I power it on.
Please note; before and after the img flashing. I kept having the same issue.
So in short, I have no idea of how to flash the tot file because it keeps giving me a Device Model error. It there truly a way for the LG FLash tool (1.8.1 I think) to simply ignore what model it is before flashing?
Also, I tried this on another computer, but no luck, same result. I'm doing this on my PC with a Virtual Machine (I run Linux Mint as a Main OS) so I'm truly unsure if it's that, though the first time I did it when I first had the issue, it worked just fine...
Any ideas, suggetions?
Edit :: Another reason why I'm posting this is because a lot, if not all people with a D800 with this issue, their posts are either ignored or discontinued. So if I get this fixed, I'll make sure to specify how I did.
bump?
buump?
lordsolrac2 said:
buump?
Click to expand...
Click to collapse
Did you flash that g4 port ROM you were looking at? That wasn't for the d800.
Art Vanderlay said:
Did you flash that g4 port ROM you were looking at? That wasn't for the d800.
Click to expand...
Click to collapse
I actually flashed This ROM
The first time I had this issue, it was because, I flashed CloudyG2 3.3.
Both the D800 Variants of the ROMs
It seems the issue is that I didn't have the kitkat bootloader (though, my device has Kitkat by default, so, why does it have this issue?)