[Q] Bricked LG G2 D801, PC/Linux not finding device! - G2 Q&A, Help & Troubleshooting

Hey guys,
I recently rooted and flashed my LG G2 D801 to the Dirty Unicorns 4.4.4 along with the JellyBean BaseBand (since I was on T-Mobile KitKat before).
I noticed that the usb connection to the PC wasn't working after the flash and thought I didn't properly clear everything. So I tried to flash the rom again only to end up clearing the internal data as well which had the rom on it. Now my phone is Bricked and I can't upload anything because the phone won't show up in Windows or Linux.
I CAN still however go into Download Mode and TWRP Recovery.
Tried to install the universal LG United Mobile Driver, phone still won't show up on PC.
Been scouring forums for a solution for a couple days but still can't find anything that will fix the issue.
What else can I do!?

Try this I was in your same situation and have D-801 and bricked my phone like 2 times(messing with it).
Just follow all the instructions from the site below and it should work.
http://forum.xda-developers.com/showthread.php?t=2432476

sai777 said:
Try this I was in your same situation and have D-801 and bricked my phone like 2 times(messing with it).
Just follow all the instructions from the site below and it should work.
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Tried the first KDZ method first and tool said phone wasn't connected.
Switched to TOT method and Device manager didn't list my phone so I can't change to COM41.
This is even though I uninstalled the LG Drivers and re-installed them...

Download everything from the post itself, even the drivers and download the KitKat July 31 KDZ. Put phone in download mode and follow directions. Only 1st mode worked for me. So I suggest you try it a few times...

Total Noob Moment
Hey guys, so ended up solving my issue around the phone not being recognized by the PC. Well, I decided today that I would try a different USB cord and whaddyaknoww the PC finally recognize/install the drivers so I could use the Flash tool with the KDZ method. :victory:
Thanks for the replies!

Related

[Q] Please HELP!!! L7-P705 keeps rebooting after unlocking bootloader

Someone please help!
I have a LG Optimus L7 P705g, on v10C stock rom, rooted according to http://forum.xda-developers.com/showthread.php?t=1906133
Then I tried to unlock bootloader and install cwm recovery following http://forum.xda-developers.com/showthread.php?t=1664322
I tried both v1 and v2 of the L7CWM archive. But the phone keeps rebooting about 2 minutes after power on.
No matter I boot normally, or boot into cwm recovery, it still restarts about 2 minutes in.
It's driving me crazy. Can somebody give me some pointer in how to resolve this constant reboot situation?
I believe I followed all the instructions provided with the above threads, and tried flashing both v1 and v2 a few times.
Thanks in advance!
ecapella said:
Someone please help!
I have a LG Optimus L7 P705g, on v10C stock rom, rooted according to http://forum.xda-developers.com/showthread.php?t=1906133
Then I tried to unlock bootloader and install cwm recovery following http://forum.xda-developers.com/showthread.php?t=1664322
I tried both v1 and v2 of the L7CWM archive. But the phone keeps rebooting about 2 minutes after power on.
No matter I boot normally, or boot into cwm recovery, it still restarts about 2 minutes in.
It's driving me crazy. Can somebody give me some pointer in how to resolve this constant reboot situation?
I believe I followed all the instructions provided with the above threads, and tried flashing both v1 and v2 a few times.
Thanks in advance!
Click to expand...
Click to collapse
ok, you need to do this.
First, follow this tutorial http://forum.xda-developers.com/showpost.php?p=31828740&postcount=1191 to flash the ROM from this post http://forum.xda-developers.com/showthread.php?t=2176430 this rom is already rooted, and includes CWM and unlocked bootloader, so you shouldn't have any problems to flash any other ROM after that one.
and second, you need to learn to search on the forum, and read more before asking already solved issues.
good luck
vashminted said:
ok, you need to do this.
First, follow this tutorial http://forum.xda-developers.com/showpost.php?p=31828740&postcount=1191 to flash the ROM from this post http://forum.xda-developers.com/showthread.php?t=2176430 this rom is already rooted, and includes CWM and unlocked bootloader, so you shouldn't have any problems to flash any other ROM after that one.
and second, you need to learn to search on the forum, and read more before asking already solved issues.
good luck
Click to expand...
Click to collapse
Thanks for your quick reply! Actually, I'm a little hesitant to use kdz updater, as I've read some posts saying that even after they flash the stock kdz, the phone was in an even worse situation.
Since I can still boot into cwm recovery (I have a 2-minute time frame before the phone restarts itself), should I do a wipe cache or something? Will it help?
Flashing the whole thing is my last resort.
ecapella said:
Thanks for your quick reply! Actually, I'm a little hesitant to use kdz updater, as I've read some posts saying that even after they flash the stock kdz, the phone was in an even worse situation.
Since I can still boot into cwm recovery (I have a 2-minute time frame before the phone restarts itself), should I do a wipe cache or something? Will it help?
Flashing the whole thing is my last resort.
Click to expand...
Click to collapse
yes, I've also read that some people have problems after flashin kdz....but i dont know why, KDZ flashing is usually the best way to make sure your phone is back to a "perfect" working state, since it restores everything to the way it should be, and in most situations is the only way to unbrick the phone.
I can't tell you how many times I had to use KDZ updater to restore my phone after messing with it, im not a developer but i do a lot of experiments with my phone trying to make it work better, and most of the times it end totally bricked, and every time KDZ updater saves my ass. Some time ago i was trying to modify the stock rom myself, and I used to flash via KDZ my phone at least twice a day....so for me is pretty safe to use
vashminted said:
yes, I've also read that some people have problems after flashin kdz....but i dont know why, KDZ flashing is usually the best way to make sure your phone is back to a "perfect" working state, since it restores everything to the way it should be, and in most situations is the only way to unbrick the phone.
I can't tell you how many times I had to use KDZ updater to restore my phone after messing with it, im not a developer but i do a lot of experiments with my phone trying to make it work better, and most of the times it end totally bricked, and every time KDZ updater saves my ass. Some time ago i was trying to modify the stock rom myself, and I used to flash via KDZ my phone at least twice a day....so for me is pretty safe to use
Click to expand...
Click to collapse
I tried to read as many posts as possible about using the L7CWM archive to unlock bootloader and CWM recovery before actually doing it. People with P700 and P705 both reported success. I don't know what I did wrong. I am so frustrated...
The ROM you pointed me to get is for P700, does it matter? (Mine is P705). Or should I use my stock rom kdz to test it out first?
Also the two links that you gave me have different phone mode setting in the KDZ updater, one set as EMERGENCY, the other one set as DIAG. Which one should I use?
Thanks again!
Hope there is an easier way than using the KDZ updater... :fingers-crossed:
ecapella said:
I tried to read as many posts as possible about using the L7CWM archive to unlock bootloader and CWM recovery before actually doing it. People with P700 and P705 both reported success. I don't know what I did wrong. I am so frustrated...
The ROM you pointed me to get is for P700, does it matter? (Mine is P705). Or should I use my stock rom kdz to test it out first?
Also the two links that you gave me have different phone mode setting in the KDZ updater, one set as EMERGENCY, the other one set as DIAG. Which one should I use?
Thanks again!
Hope there is an easier way than using the KDZ updater... :fingers-crossed:
Click to expand...
Click to collapse
yep, it's for P700, but other than NFC, there's no difference...i dont recomend to use that rom for every day because it will drain your battery because of the NFC. but since it comes already rooted and unlocked, its an excelent base to make sure everything is well installed, after that you should be able to enter into recovery without problems, and then you can flash a ROM for P705. Personally I suggest you to try this one http://forum.xda-developers.com/showthread.php?t=2472479 it's working very good for me, and have specific kernel to p705
Of course you can try with stock kdz for p705, but hen you will have to repeat the process with L7CWM and chances are that something goes wrong again.
And I gave you the link that use EMERGENCY because it is the way I use to flash a KDZ, you can try to follow tutorial with DIAG option, but I haven't test it myself, and I would never recommend something I haven't tested before. Also because you said your phone reboots every two minutes, and I think DIAG option needs the phone to be ON while flashing, in EMERGENCY option, the phone will never turn off untill you unplug the cable.
vashminted said:
yep, it's for P700, but other than NFC, there's no difference...i dont recomend to use that rom for every day because it will drain your battery because of the NFC. but since it comes already rooted and unlocked, its an excelent base to make sure everything is well installed, after that you should be able to enter into recovery without problems, and then you can flash a ROM for P705. Personally I suggest you to try this one http://forum.xda-developers.com/showthread.php?t=2472479 it's working very good for me, and have specific kernel to p705
Of course you can try with stock kdz for p705, but hen you will have to repeat the process with L7CWM and chances are that something goes wrong again.
And I gave you the link that use EMERGENCY because it is the way I use to flash a KDZ, you can try to follow tutorial with DIAG option, but I haven't test it myself, and I would never recommend something I haven't tested before. Also because you said your phone reboots every two minutes, and I think DIAG option needs the phone to be ON while flashing, in EMERGENCY option, the phone will never turn off untill you unplug the cable.
Click to expand...
Click to collapse
I read another post about flashing the Homero's v10K rooted KDZ that you mentioned into a North American P705, and that made the phone unbootable.
But fortunately, I managed to get a stock bootloader from a friend's North American P705 and push it into my phone. This did the trick, my phone didn't have the boot loop anymore.
Then, I upgraded the stock firmware to v20A via LG's mobile support tool. At this version (JB as opposed to ICS), I tried to push the cracked bootloader into the phone again. This time, everything was all right, no boot loop! So I flashed the CWM recovery, and everything was good.
I just tested out Szymel's modded stock rom v20E with OC 1305Mhz, seems pretty good!
Now I have a lot of ROM choices to test out. :laugh:
Anyway, thanks so much for your help and suggestions!
HELP
ecapella said:
I read another post about flashing the Homero's v10K rooted KDZ that you mentioned into a North American P705, and that made the phone unbootable.
But fortunately, I managed to get a stock bootloader from a friend's North American P705 and push it into my phone. This did the trick, my phone didn't have the boot loop anymore.
Then, I upgraded the stock firmware to v20A via LG's mobile support tool. At this version (JB as opposed to ICS), I tried to push the cracked bootloader into the phone again. This time, everything was all right, no boot loop! So I flashed the CWM recovery, and everything was good.
I just tested out Szymel's modded stock rom v20E with OC 1305Mhz, seems pretty good!
Now I have a lot of ROM choices to test out. :laugh:
Anyway, thanks so much for your help and suggestions!
Click to expand...
Click to collapse
i have the same problem with my l7 p705 i rooted it and then i installed CWM and then it started restarting every 2 minutes. so i thought maybe unrooting it would help but it didn't. please give me all the steps that you did so i can stop my phone from booting every 2 minutes.!!!
LG P705
My Phones says secure booting error Cause:boot certification verify i`m a newbie help me please ,
Lg Optimus L7 P705 Secure booting Error!
Hello everyone,
I'm from Turkey.
I have LG Optimus L7 P705.
My problem, to take root and Cyanogenmod. But phone is brick.
I have seen the error screen :
-Secure booting Error!
-Cause : boot certification verify
Help me !
Mail Adress 7/24 : [email protected]

[Q] [REQ] DLL for flashing D805 10B TOT file through LG Flash Tool 1.6 - Please help

Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595
Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...
Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilĂ , like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!

[Q] b2cappsetup wont install

im at my wits end!I bricked my phone. im trying to restore to stock using these instructions: http://forum.xda-developers.com/showthread.php?t=2432476, but I cant get the GD lgmobile support tool to install! ive tried disabling my firewall. any ideas?? also I have a vs980. which of the following KDZ files do I use: VS98010B_13.KDZ, VS98011A_01.KDZ, VS98012B_00.KDZ, or VS98024A_11.KDZ ? anyone know of a cheap, but reputable service for unbricking phones? thanks.
lokeycmos said:
im at my wits end!I bricked my phone. im trying to restore to stock using these instructions: http://forum.xda-developers.com/showthread.php?t=2432476, but I cant get the GD lgmobile support tool to install! ive tried disabling my firewall. any ideas?? also I have a vs980. which of the following KDZ files do I use: VS98010B_13.KDZ, VS98011A_01.KDZ, VS98012B_00.KDZ, or VS98024A_11.KDZ ? anyone know of a cheap, but reputable service for unbricking phones? thanks.
Click to expand...
Click to collapse
so I got lg support tool to install, but now it doesn't recognize my phone as being plugged in. in the directions it appears that you have to enable usb debugging, but I cant do that cause my phone wont boot past TWRP recovery.i already wiped everything on the phone. is there a way to flash to stock from twrp?
here is a screen shot. my model isn't listed in the available options for a driver.
lokeycmos said:
so I got lg support tool to install, but now it doesn't recognize my phone as being plugged in. in the directions it appears that you have to enable usb debugging, but I cant do that cause my phone wont boot past TWRP recovery.i already wiped everything on the phone. is there a way to flash to stock from twrp?
here is a screen shot. my model isn't listed in the available options for a driver.
Click to expand...
Click to collapse
Put your phone in download mode
Navigate to c:\windows\system32\drivers\etc
open hosts in notepad++ or whatever..
maybe you'll notice the lines 127.0.0.1 lg..blabla.., just delete them or put # in front of them (#127.0.0.1 lg.blablabla..)
This is in case you tried the automatic offline kdz installer and the vbs couldn't remove the lines itself.

[Q] Why I bricked my phone with LG Flash tool?

I have LG G2 D802 32GB. When I bought it, there was Android 4.4.2 KitKat installed.
Then I rooted it using ioroot25 and installed custom recovery using AutoRec.
I flashed CloudyG3 v1.2 rom by @Cloudyfa using TWRP.
It was working really good except the VOIP calls, thus I wanted to revert back to stock.
I found this guide: http://forum.xda-developers.com/showthread.php?t=2432476
I tried to flash it using some Europe Open KDZ from this page: http://storagecow.eu/index.php?dir=Xda%2FLG+G2%2FStock%2F
The flashing started and stucked at I think 4%. I rebooted the phone and it appeared as qhsusb_dload.
I can't remember if I clicked on Normal or CFE flash. But I think it was normal.
I tried to unbrick it with this guide: http://forum.xda-developers.com/showthread.php?t=2582142
After that I got only LG logo and no recovery, no fastboot, no download mode, no qhsusb_dload mode, no nothing.
Now I got board replacement. The board have rooted Android 4.2.2 Jelly Bean installed.
As I want to have CloudyG3 installed. I tried to do that by installing custom recovery and then flashing the CloudyG3 rom and KitKat baseband. But I think I have a battery drain issue, as Cludyfa already said. I also tried with flashing the Cust and Persist partitions from the KitKat KDZ, but my battery didn't got any better.
The question is, why I bricked my phone with LG flash tool? What should I do to make sure that this won't happen again?
I made backup of entire phone nand (mmcblk0). Should I DD it if I get the bulk mode (qhsusb_dload) again?
Thank you in advance for your answers.
@mss1988 if the phone is stuck at 4% just let it still for some time cause the program could might be bugged or some other error, just leave the phone on dont restart it cause the phone has first removed the stuff and didnt copied the bootloader etc yet.
If you get qhsusb_dload mode then I suggest to use the unbrick guide and also Pick the right files for your phone. You can DD your backup to your phone but using the unbrick guide seems safer to me.
Also check when you can use that qhsusb dload that all files are copied good.
Tip to prevent brick after root and custom recovery: Flash an stock rom through recovery or an stock rom which got modified under the hood.
wulsic said:
@mss1988 if the phone is stuck at 4% just let it still for some time cause the program could might be bugged or some other error, just leave the phone on dont restart it cause the phone has first removed the stuff and didnt copied the bootloader etc yet.
If you get qhsusb_dload mode then I suggest to use the unbrick guide and also Pick the right files for your phone. You can DD your backup to your phone but using the unbrick guide seems safer to me.
Also check when you can use that qhsusb dload that all files are copied good.
Tip to prevent brick after root and custom recovery: Flash an stock rom through recovery or an stock rom which got modified under the hood.
Click to expand...
Click to collapse
When phone stucked there was also some message box on LG Flash Tool. Something like that: ?????? ??? ????????.
Sent from my LG-D802 using XDA Free mobile app
Broken usb cable or port? Problems on pc?
siggey said:
Broken usb cable or port? Problems on pc?
Click to expand...
Click to collapse
As far as I know none of that.
Sent from my LG-D802 using XDA Free mobile app
That something like ????? Was probably in some asian language which your pc couldnt read. Some pc's makes boxes from it some ?. I cant tell you what that ???? Means since they have no meaning without any real symbols from some language of asia (I dont know where the dev comes from)
If it was stuck at 4% you could ask it on the thread of the lg flashtool since the dev of it and or other users may know the problem.
mss1988 said:
What should I do to make sure that this won't happen again?
Click to expand...
Click to collapse
Read the tutorial in detail & HAVE some patience man.

Hard Brick D802.

Hey guys. Had some weird brick with d802, phone started rebooting after connecting to my house wifi and then i did a factory reset.
It started bootlooping from then and now i can't do anything except dl mode.
But, when in kdz update the computer cannot recognize the device. i mean, none of the computers that i''ve tried at. i got the drivers installed and everything. what should i do now?
I'm at cloudy g3 2.0
theduardo said:
Hey guys. Had some weird brick with d802, phone started rebooting after connecting to my house wifi and then i did a factory reset.
It started bootlooping from then and now i can't do anything except dl mode.
But, when in kdz update the computer cannot recognize the device. i mean, none of the computers that i''ve tried at. i got the drivers installed and everything. what should i do now?
I'm at cloudy g3 2.0
Click to expand...
Click to collapse
Try pdanet drivers. Delete lg drivers and install that.
Art Vanderlay said:
Try pdanet drivers. Delete lg drivers and install that.
Click to expand...
Click to collapse
already solved the problem, i flashed some .tot files that get me to cellcom version, something weird. got to flash a kdz to restore my phone to the original version now. thanks

Categories

Resources