Hard Brick D802. - G2 Q&A, Help & Troubleshooting

Hey guys. Had some weird brick with d802, phone started rebooting after connecting to my house wifi and then i did a factory reset.
It started bootlooping from then and now i can't do anything except dl mode.
But, when in kdz update the computer cannot recognize the device. i mean, none of the computers that i''ve tried at. i got the drivers installed and everything. what should i do now?
I'm at cloudy g3 2.0

theduardo said:
Hey guys. Had some weird brick with d802, phone started rebooting after connecting to my house wifi and then i did a factory reset.
It started bootlooping from then and now i can't do anything except dl mode.
But, when in kdz update the computer cannot recognize the device. i mean, none of the computers that i''ve tried at. i got the drivers installed and everything. what should i do now?
I'm at cloudy g3 2.0
Click to expand...
Click to collapse
Try pdanet drivers. Delete lg drivers and install that.

Art Vanderlay said:
Try pdanet drivers. Delete lg drivers and install that.
Click to expand...
Click to collapse
already solved the problem, i flashed some .tot files that get me to cellcom version, something weird. got to flash a kdz to restore my phone to the original version now. thanks

Related

[Q] [REQ] DLL for flashing D805 10B TOT file through LG Flash Tool 1.6 - Please help

Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Read this carefully may help you
http://forum.xda-developers.com/showthread.php?t=2477595
Yeah, that was the guide I used when I landed on fastboot after a bad flash from CleanROM... I flashed some boot.img and recovery.img that didnt work out well.
After I flashed these I rebooted and fastboot mode was no longer loading, instead, I am now on bootloop of the LG logo, with no animation, just the first logo that shows on boot, and I can access stock recovery to factory wipe and also access download mode. My download mode shows rooted warning, and while I am flashing a KDZ, does not show the firmware version I currently have in the middle of the box - before I flashed those .IMGs, it did show the version.
I now a, after a .DLL for D805 10A .TOT file, and I cannot find it. I think the flash method from LGFlashTools 1.6 will work, with .DLL and .TOT files, where the LGFlashTools 1.0.5 did not work for me, with .KDZ.
Or if anyone knows of a way to get into the fastboot mode for G2, pelase let me know. Then I could reflash some .IMG files and hopefully get my phone back online...
Try to flash other version even this is 802 or internetional version. At least you can proof your phone completly brick or not.
I only have all TOT file link of F320 and D802 if you need to try.
Sent from my LG-F320L using xda app-developers app
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
KriegerBread said:
Hey Buddy.. Im from SP, Brasil... Does you fix it? Maybe I can help u...
Sent from my LG G2 Dev Edition
Click to expand...
Click to collapse
Andrew-droid said:
Guys, I really need to find the LG DLL file database for flashing .TOT files.
The DLL file I need is for the LG G2 D80510B_00 or LG G2 D80510A_00 TOT file firmwares, to be used on 1.6 LGFlashTool, for Brazil unbranded variant of the phone. I believe it will work for all D805 models.
The .TOT file I intend to use is LGD805AT-00-V10a-724-05-AUG-23-2013-16G+0.tot
I have scoured the internet for over a week and found none other than in a chinese LG G2 forum, the link -- http://bbs.gaodi.net/forum.php?mod=viewthread&tid=662769&extra=page=1&filter=typeid&typeid=2381 -- and the file was no longer available for download. I registered on their forum, but the file was showing an error even after proper registration.
I have not found this DLL anywhere, is there a database for it? How did people come up with the AT&T and Vzn DLL versions? I haven't been able to extract it from the KDZ files either, and the DLLs generated from the KDZ during UpdateTool does not work.
I had bricked the phone originally by trying to use Scott's Clean Rom on it, and it bricked into fastboot mode. I flashed something wrong on fastboot, I can't even remeber what, and rebooted, and fastboot was no longer accessible...
I can get into download mode, and factory reset from stock recovery, no custom recovery available, it is gone. I try to flash KDZ files, many versions besides my D805 one, just for the sake of trying, but all of them get stuck on the 49% point. I have set up port 41, disabled modem, reset phone before trying, selected many different language combinations besides my own Portuguese one. Nothing works.
On LGFlashTool 1.6 it seems like it can work, but it errors at 1%, when I use the DLLs for D800 or D802. I need the DLL for D805. I even managed to find the proper TOT file.
I have also searched for about two days on how to reenter fastboot mode from where I currently am stuck.I even did a DIY Factory Cable on an micro USB I had lying around, soldered it all right, but it did not work, and the cable got very hot. I think these cables will not get G2 into fastboot mode, like it seems to do on Kindle fire and Motorola devices. Maybe my DIY was not that good, but I think it should have worked, I made sure the soldure was set and good.
I am downloading Android SDK to try to get back into fastbood mode from there, if there is a way, as it seems to be. I would try to reflash boot and other partitions in an attempt to fix my phone... Is there a way, or another faster path back into Fastboot?
Download mode does not show the version of the firmware on the phone in the box that displays information in the bottom while fdlashng KDZ files. It leaves a blank line where it should be. I believe it is part of my problem, that LGFlashTool does not see a version on the phone at some point, and fails. Or the phone rejects the PC pushes.
I am almost going to the tech support guy with a flash box downtown, but that would be my last resot, and then official LG support, if all else fails. I don't want to go to LG yet because download mode shows ROOTED in red, and they would see it probably, and my warranty become void.
Thanks for any ideas, guidance or help... Cheers guys.
Click to expand...
Click to collapse
Andrew-droid said:
Hi guys, I finally managed to fix it a couple days after my thread.
I took long to post this, sorry, I had some interner problems...
Turns out there's already a thread explaining how to do it.
http://forum.xda-developers.com/showthread.php?t=2471370
I went to LG Mobile Support Tool and >Options on top right >Update Recovery.
It had to download, so I did it at a friend's who had 50Mbps internet house, to fix this.
I am sorry that I could not manage to do it offline. I even had the KDZ file to flash, but it was only possible through this option in LG Support Tool...
Best of luck to all in any similar problem, I know I was kinda without hope at some points. I spent 2 weeks trying to fix the phone.
Cheers,
Andrew
Click to expand...
Click to collapse
Hi Guys, I know this is a very very late answer but maybe it can help someone!
DarkSyrius said:
Hi guys, I know this is not the right spot to ask it, but it more visited than other.
I already installed this ROM and Worked all fine, but when I'm trying to install some Magisk Modules and rebooted my device it get stuck at LG logo... I can access Download mode but not my TWRp recovery.
Any solution to my problem? Just a little help...
Thank you so much anyway!
Click to expand...
Click to collapse
Thanks to all that tried to help me! I appreciate it a lot! Thank you so much!
My only solution was to try short the capacitors following this thread:
https://forum.xda-developers.com/lg-g2/general/lg-g2-unbrickable-fix-real-hard-brick-t2904404
Thanks God I don't need to mess with the board!
My problem was that I tried this ROM LineageOS 17.1 with latest version of TWRP Blastgator. Everything was running fine until I flashed Magisk and installed some Mods, then the device rebooted and I get stuck at logo!
No System and no Recovery access, only Download mode! :crying:
Then I followed this thread:
https://forum.xda-developers.com/showthread.php?t=2432476
I used to install some custom ROMs like Cloudy G2, LineageOS, Resurretion Remix and AOSPX Pie and tried to this new one. I never had any problems!
This time I realized that my device was forever bricked, my last hope was to short the capacitors but I tried all ways to back to Stock because in Downlaod Mode my device was recognized by Windows.
I tried this in Windows 10 x64 but no success, then I formatted an old HD with Windows 7 x64 to try again!
Old Flash Tool get me stuck at 2% or 4%... no success in both system with all LG drivers available... NO SUCCESS!
https://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
LGUp only gives Unknow Device and never start but it's seens the device on port 41 - that I changed following the tutorial.
My last hope was New Flash Tool but I needed TOT file for my Device - D805 not D802 and the correct DLL. initially I didn't find anywhere... Like this guy:
https://forum.xda-developers.com/showthread.php?t=2583851
I give a lot of tries... a lot of different files, DLLs, tried .KDZ and .DZ, only errors and errors... a lot of "Failed to Load()"...
I'm getting frustrated until I see this thread:
https://forum.xda-developers.com/showthread.php?t=2582142
And found this mine of gold of Downloads:
http://downloads.codefi.re/autoprime/LG/LG_G2/
And again, thanks to all, there is a hope in the D805 folder!
I get the TOT File: BIN_LGD805AT-00-V10a-724-05-AUG-23-2013-16G.zip and tried the LG Firmware Extractor (https://forum.xda-developers.com/showthread.php?t=2600575) to get a new DLL (LGUP8974.dll).
And voilĂ , like a charm that WORKED!!!!!!!!! :fingers-crossed::highfive:
It installed Jelly Bean the with the Official LG Updater I installed Kitkat and finally Lollipop.
Later I'll try this LineageOS Rom again!
I hope I can help someone in need like me!!
I thank this forum a lot!!
And please excuse my English!
Thank you so much!

stuck....ls980 thinks it is the d800

my ls980 thinks it is the d800 and I can't seem to flash it back to the ls980.
I flashed a custom ROM thru twrp and I got an error. I tried restoring the backup and the system partition would not mount. after poking around for quite some time I tried restoring the phone in download mode. apparently the computer thought it was the d800 and flashed the system for that phone. when it restarted I saw the at&t boot screen and when it started up it was not working correctly.
I put it back in download mode and tried flashing the phone again. the computer was sure it was the d800. then I tried flashing manually using the DLL intended to convert this and the tot file for the ls980. I get the error saying I can't convert from the d800 to the ls980.
I then tried flashing thru adb from both windows and linux. both say they cannot find the phone regardless how I try connecting.
since I flashed the factory files the phone will not start in recovery mode I have no clue why.
so now I have a phone that:
will not flash the ls980 tot file,
will not connect to adb,
and will not boot into recovery.
now what?
-boxorandyos
<sent from my nexus4>
Dang dude. Harsh. I almost ended up in this same situation after downloading files for the wrong device and noticed literally at the last second and was able to pull the plug, literally, and save my device.
I've been looking for ways to fix it in case it happens again and I don't catch it in time, so if I find the answer I'll let you know. There has to be a way to trick the computer into thinking it's a LS980 like it's supposed to be the same way it thought the phone was a d800.
Sent from my LG-LS980 using XDA Premium 4 mobile app
I was told that there was a DLL file that could be used when flashing it to trick it into thinking it's the ls980 but all I get is an error message I forget exactly what the message says but something to the extent that I don't have the right files for the phone that I have.
-boxorandyos
<sent from my nexus4>
yo
boxorandyos said:
I was told that there was a DLL file that could be used when flashing it to trick it into thinking it's the ls980 but all I get is an error message I forget exactly what the message says but something to the extent that I don't have the right files for the phone that I have.
-boxorandyos
<sent from my nexus4>
Click to expand...
Click to collapse
yo man have you tried using LGNPST, we're in the same boat, i'm waiting for my some downloads on firmwares to try, i'm using LS980 but it thinks it's a VS980 still working on figuring out from my end. i've also heard that the LG mobile support tools can be used to restore the firmware but you gotta do some funny hot swap lol
vegito6 said:
yo man have you tried using LGNPST, we're in the same boat, i'm waiting for my some downloads on firmwares to try, i'm using LS980 but it thinks it's a VS980 still working on figuring out from my end. i've also heard that the LG mobile support tools can be used to restore the firmware but you gotta do some funny hot swap lol
Click to expand...
Click to collapse
woops im a little slow here. what is LGNPST ? I solved the issue by manually editing the build.prop file and that tells the lg mobile support tool that it is a different phone. that was a whole different complicated story of its own but it worked.
sorry I didnt see your comment until now.
def sounds like you used the wrong dll or just the stock lg dll which works with some phones, but others need their specific dll to match the tot and such to make a proper bootloader flash over i believe.

[Q] Bricked LG G2 D801, PC/Linux not finding device!

Hey guys,
I recently rooted and flashed my LG G2 D801 to the Dirty Unicorns 4.4.4 along with the JellyBean BaseBand (since I was on T-Mobile KitKat before).
I noticed that the usb connection to the PC wasn't working after the flash and thought I didn't properly clear everything. So I tried to flash the rom again only to end up clearing the internal data as well which had the rom on it. Now my phone is Bricked and I can't upload anything because the phone won't show up in Windows or Linux.
I CAN still however go into Download Mode and TWRP Recovery.
Tried to install the universal LG United Mobile Driver, phone still won't show up on PC.
Been scouring forums for a solution for a couple days but still can't find anything that will fix the issue.
What else can I do!?
Try this I was in your same situation and have D-801 and bricked my phone like 2 times(messing with it).
Just follow all the instructions from the site below and it should work.
http://forum.xda-developers.com/showthread.php?t=2432476
sai777 said:
Try this I was in your same situation and have D-801 and bricked my phone like 2 times(messing with it).
Just follow all the instructions from the site below and it should work.
http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
Tried the first KDZ method first and tool said phone wasn't connected.
Switched to TOT method and Device manager didn't list my phone so I can't change to COM41.
This is even though I uninstalled the LG Drivers and re-installed them...
Download everything from the post itself, even the drivers and download the KitKat July 31 KDZ. Put phone in download mode and follow directions. Only 1st mode worked for me. So I suggest you try it a few times...
Total Noob Moment
Hey guys, so ended up solving my issue around the phone not being recognized by the PC. Well, I decided today that I would try a different USB cord and whaddyaknoww the PC finally recognize/install the drivers so I could use the Flash tool with the KDZ method. :victory:
Thanks for the replies!

G2 brick/driver issue

Hey all I'm looking for a little help on an issue that I can't seem to find any exact info on (I have searched quite a bit)
The problem is that I have seemingly soft bricked my G2 whilst trying to restore a 4.4.2 backup coming from a stock custom 5.0.1 Rom.
The phone is stuck in a bootloop and I cannot access recovery mode through any of the button combinations or any other way.
I have installed the latest LG drivers but when I connect the phone (while in boot loop) the pc tries to install "LGE Android MTP Device" but fails to complete.
When in download mode though, the phone is recognised as "LGE AndroidNet USB Modem"
When I try to flash a stock KDZ via Flashtool,every time it gets to 2% and then throws an error message telling me to retry.
If this is an issue with the drivers not installing correctly, is there another way of getting them to install without the phone being switched on and USB Debugging on?
If so I would greatly appreciate a little light shed on the matter.
As I said, I have searched a lot about this and did not find any other cases similar to mine where the USB drivers could not be installed.
Thanks
Darren
surfsyco said:
Hey all I'm looking for a little help on an issue that I can't seem to find any exact info on (I have searched quite a bit)
The problem is that I have seemingly soft bricked my G2 whilst trying to restore a 4.4.2 backup coming from a stock custom 5.0.1 Rom.
The phone is stuck in a bootloop and I cannot access recovery mode through any of the button combinations or any other way.
I have installed the latest LG drivers but when I connect the phone (while in boot loop) the pc tries to install "LGE Android MTP Device" but fails to complete.
When in download mode though, the phone is recognised as "LGE AndroidNet USB Modem"
When I try to flash a stock KDZ via Flashtool,every time it gets to 2% and then throws an error message telling me to retry.
If this is an issue with the drivers not installing correctly, is there another way of getting them to install without the phone being switched on and USB Debugging on?
If so I would greatly appreciate a little light shed on the matter.
As I said, I have searched a lot about this and did not find any other cases similar to mine where the USB drivers could not be installed.
Thanks
Darren
Click to expand...
Click to collapse
Have you tried flashing a .TOT file using the .TOT method instead of .KDZ? What is your phones model?
http://downloads.codefi.re/autoprime/LG/LG_G2/
It's a D802. And no I haven't tried that although I am intrigued as to what it entails. Is it the same procedure as KDZ flashing?
I really appreciate are the reply btw
surfsyco said:
It's a D802. And no I haven't tried that although I am intrigued as to what it entails. Is it the same procedure as KDZ flashing?
I really appreciate are the reply btw
Click to expand...
Click to collapse
No worries. You'll find the TOT method here. Scroll down a little.
Make sure you quote my reply next time as I only get notified of your response when you quote mine.
surfsyco said:
It's a D802. And no I haven't tried that although I am intrigued as to what it entails. Is it the same procedure as KDZ flashing?
I really appreciate are the reply btw
Click to expand...
Click to collapse
If your having trouble with the drivers then delete them, reboot and install pdanet. If it still fails at 2% then go the tot method.
d00lz said:
No worries. You'll find the TOT method here. Scroll down a little.
Make sure you quote my reply next time as I only get notified of your response when you quote mine.
Click to expand...
Click to collapse
Yeah will do mate lol.
I am at work at the minute but I will get a wee look see at it later.
Again mate, thanks for taking the time to reply.
Darren
d00lz said:
No worries. You'll find the TOT method here. Scroll down a little.
Make sure you quote my reply next time as I only get notified of your response when you quote mine.
Click to expand...
Click to collapse
Art Vanderlay said:
If your having trouble with the drivers then delete them, reboot and install pdanet. If it still fails at 2% then go the tot method.
Click to expand...
Click to collapse
Yeah I will definitely give this a go when I get home later.
Thanks for the reply.
Darren
d00lz said:
No worries. You'll find the TOT method here. Scroll down a little.
Make sure you quote my reply next time as I only get notified of your response when you quote mine.
Click to expand...
Click to collapse
Just wanted to thank you mate, that method worked great and I now have my beloved G2 back up and running again.
I really appreciate the help and info.
Cheers buddy.
Darren

LG Magna stuck in bootloop/bricked

So first of all a little bit of backstory: I tried using TWRP on my phone to install a supposed CM13 rom that actually ended up bricking my phone, but I had made a full backup beforehand in case something like this happened, so I restored the backup via TWRP and nothing, so I thought to myself I'll just wipe my phone and install a stock rom, and so I did, but nothing, the phone was stuck in a bootloop on first launch ( I left it on for about an hour just to make sure). So I used LG Flash Tool with a .dz stock rom for my phone but still nothing, I also tried the official LG tool but the result was the same. I have access to download mode, fastboot and can factory reset the phone, I tried factory resetting it but nothing. So I assume my phone is bricked, how do I unbrick it?
I'm using an LG Magna H502Y Dual-Sim and has an MT6582 chip
Cheers,
Kamefrede
Exactly the same problem here.
You solved that problem?
LG H502G
https://drive.google.com/file/d/0Bz_wqQF1h_j8ejRVeFR1dTBXZlE/view
Flash this with SPFlashtool.
I used this with my LG H502G and it worked!
Trial on H500f
Ardavalar said:
Flash this with SPFlashtool.
I used this with my LG H502G and it worked!
Click to expand...
Click to collapse
I will try it now at my H500f and I really hope it works...
Edit:
LG Magna H500f soft brick fixed. Love u dude! <3
Edit 2:
Don't flash the MD version. And don't downgrade with this ROM. I bricked my H500f again. Heavy.
JuliB said:
I will try it now at my H500f and I really hope it works...
Edit:
LG Magna H500f soft brick fixed. Love u dude! <3
Click to expand...
Click to collapse
It is a pleasure to have been of help <3
LG h502f no root
Stuck in bootloop but couldn't enter download mode to flash
Same problem in my phone, bootlooping. When i choose hard reset, phone restart but never enter reset process, just looping again. I try to enter download mode (i hope could flash my rom), but never succeeded. I am new to bootlooping problem. Hope someone has solutions ... Tks
Ardavalar said:
https://drive.google.com/file/d/0Bz_wqQF1h_j8ejRVeFR1dTBXZlE/view
Flash this with SPFlashtool.
I used this with my LG H502G and it worked!
Click to expand...
Click to collapse
can someone help me plz
Alaa78 said:
can someone help me plz
Click to expand...
Click to collapse
yes

Categories

Resources